column used for sale

pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load capacity: 500kg, reach: 2750mm, swivel range: 360°, foundation column weight: approx. 3000kg, tare weight: approx. 3350kg. Documentation available. On-site inspection is possible.

bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...

Two fully functional Schmiedl column-mounted slewing cranes are available. 1) Schmiedl crane type 3, year of construction: 1993, load capacity: 1000kg, radius: 5000mm. 2) Schmiedl crane type 3, year of manufacture: 1992, load capacity: 1000kg, radius: 7000mm. On-site inspection is possible.

Stock number: D1209, Mobile column lift, stainless steel,, KÅ-GE-LYFTEN type SKV200 MIPKHRT., With chain drive,, emptying height 2000 mm., W 1500 x D 1100 x H 2800 mm., Material: Stainless steel AISI 304, Dimensions: W 1500 x D 1100 x H 2800 mm.

Upstroke press Top lid can tilt open to allow mould to be (un)loaded Capacity: 150 ton Passage between uprights: 1850 mm Max ram adjustment: 500 mm Distance between table -- ram: 1000 mm Table area: 1800 x 1300 mm Height: 2350 mm

Stock number: D1211, Column lift, stainless steel,, stationary with spindle., Danfotech type SH300,, 1,5 kW., 3 x 220 Volt,, max 300 kg., Variable emptying height 2000 - 2700 mm,, W 1200 x D 500 x H 3400 mm., Material: Stainless steel AISI 304, Dimensions: W 1200 x D 500 x H 3400 mm.

Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton

Stock number: D913, Column lift, stainless steel,, Scanio type K7, for floor mounting., Fork-lift with bin fork for, lifting and tipping of Vemag bins., Max. tipping height 1900 mm., Material: Stainless steel AISI 304

Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton

Stock number: D1088, Column lift, painted edition., 1,1 kW motor, 220/380 Volt,, spindle type., Lifting fork with slot grip,, for lifting and emptying of Vemag wagons., Total height 2850 mm.,, estimated tipping height 1900 mm., Material: Painted edition

pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: SF171, Gel press filter column, stainless steel,, type Dan-process., Hanging in tiltable stand,, air controlled press cylinder at the top., Product filter in the bottom,, Ø 300 x H 1000 mm. column., Material: Stainless steel AISI 304

Technical data SCREW PRESS DELLAVIA mod. BRINDISI Brand DELLAVIA Modell Brindisi Screw diameter 180 mm Nominal Power 340 ton Max allowable power 550 ton Light between the uprights under the guides 460 mm Light between the uprights within the guides 350 mm Table dimension 430 x 550 mm Table distance under the guides 445 mm Overall dimension 3710 x 2590 x 1890 mm Power 20 Kw Weight 9 ton

Column formwork - Twin formwork Fabr. Howal Type Hystanplus - Length of the formwork 16 m - Max. chamber size 1.00 x 1.00 m - Steel formwork - Incl. 10 vibrators - incl. converter - incl. control Formwork can be moved hydraulically

Stock number: SF015, Dynamic axial compression flow-through bed, stainless steel,, type Dan-Process,, hanging in tiltable rack., Air driven pressing cylinder in the top., Product filter in the bottom., Ø 200 x H 900 mm column., Material: Stainless steel AISI 304

Column-Mounted Crane DEMAG Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist In good condition Voltage: 380 V Weight: approx 250 kg

BFTech JZ-25 Max drill capacity: 25 mm Belt - vario (from -- to): 240 > 2710 rpm Height: 1100 mm

Ibarmia EAP 60 Mk5 Admission in drilling-spindle (morse): Mk5 Max drill capacity: dia 70 mm SPEEDS: 50 > 1004 rpm

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t stroke: 600 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25234 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Long spindle MK 3 - Drilling spindle speeds infinitely adjustable - Level 1 160 - 1125 rpm - Level 2 320 - 2250 rpm - Drilling spindle stroke 120 mm - Feeds 0.1 + 0.2 mm/rev - Projection 293 mm - Column diameter 115 mm - Table size 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vise - 10 pcs HSS – drill bits 10 – 25 mm - Space requirement approx. W 500 x H 1750 x D 900 mm - Weight approx. 270 kg

pressure: . t throat: . mm stroke: . mm total power requirement: . kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single column hydraulic press MAE type S63SZ SOMasch.Nr. 551277 year of construction approx. 1977Nominal compressive force 63 ton. Pressing force: 50 tons (Practically tested)Projection 320 mmTable surface 850 x 630 mmRam area 1050 x 500 mmRam stroke 500 mmInstallation height max. approx. 730 mmTable height above floor 970 mmTank capacity hydraulics 600 litersDrive power 15 kWNerg connection 380 volts, 50 Hz- Hydraulic drawing cushion under the table with holes through the table top- 2-hand control- Electrical control cabinet damagedSpace requirement L x

Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Single column - eccentric press WEINGARTEN type ERV 40Masch. No. 537 / 65 Year of construction 1965Compressive force 40 ton. Projection 230 mmTable size 570 x 470 mmPlunger area 250 x 200 mmClamping pin hole 40 mmInstallation height max. approx. 520 mmStroke adjustment 8 - 88 mmPlunger adjustment range 63 mmStroke rate 70 strokes per minuteDrive power 3 kWNetz connection 380 volts, 50 Hz- Table height adjustment- Overload protection by crushing plate- Clutch-brake combination by WEINGARTEN friction threaded coupling-

Single column - eccentric press WEINGARTEN type ER 63Masch. No. 52A / 63 Year of construction 1963Pressure capacity 63 ton. Projection 280 mmTable surface 630 x 530 mmAdjustable plunger stroke 8-100 mmPlunger adjustment 63 mmStroke rate 65 strokes / min. Engine power 4 kWNetz connection 380 Volt, 50 Hz- Clutch-brake combination by WEINGARTEN friction threaded clutch- Electrical stroke release via foot switch- Wheel counters- Overload protection by crushing plate- Front crankshafts Support bearingSpace requirement L x W x H 1500

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Single column hydraulic press SCHÖN type TES/CBbuilt in 1977Compressive force 63 ton. (160 bar)Projection 320 mmTable size 600 x 770 mmPlunger area 600 400 mmPlunger stroke 125 mmInstallation height max. 400 mm (with intermediate plate on the ram)Slide speed Rapid traverse downwards approx. 180 mm/sec. Ram speed work approx. 25 mm/sec. Pushrod speed upwards approx. 180 mm/sec. Table height above floor 870 mmDrive power 22 kWNet connection 380 volts, 50 HzTank capacity approx. 280 litres Hydraulic oil

Single column hydraulic press SCHULZ type SES 250Masch.Nr. 04.86.3511/3 Year of manufacture 1986Compressive force 25 ton. Retraction force 10 toProjection 360 mmTable surface 600 x 720 mmPlunger area 500 x 500 mmFailure opening in table 100 mmPin hole 40 mmPlunger stroke 400 mmInstallation height max. 600 mmTable height above floor 935 / 775 mmTank capacity hydraulics 380 litresDrive power 7.5 kWNet connection 380 volts, 50 Hz- Fixed stop adjustment in the press cylinder 180 mm- Light barrier

Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used