33 offers

Category: 703: meat and fish processing machines
New in: used
Price: 9.250 €
Location: Land-de DE 97786 Motten, Hammerweg 13
Seller: Statt Nahrungsmittelmaschinen

Stephan MC10 Microcut, Emulsifyers, Colloid mill, Koialmühle, Inotec Machine in a State Voltage: 400V Performance: 7500W Speed: 2900 RPM neat and quiet running Machine must be cleaned thoroughly before use. Video about test run and more pictures available

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Floorspace 1.0x0,6 M, Total height 1,5 M, Colloid mill /cutter, House material stainless steel , Rotor material stainless steel , Rotor sizes Dia. 100mm, With jacket , With hopper Dia. 600x700mm, Outlet Dia. 45mm, Motor 15 KW, 380 VoltCOLLOID MILLSGRINDERS > COLLOID MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 703: meat and fish processing machines
New in: used
Price: 11.750 €
Location: Land-de DE 97786 Motten, Hammerweg 13
Seller: Statt Nahrungsmittelmaschinen

Stephan MC10/2 Microcut, Emulsifyers, Colloid mill, Koialmühle, Inotec Voltage: 400V Protection: 20A Power: 5500/7500W Speed: 1450/2900/min With circulation system and 90 litres hopper equipped with 0, 9 mm cutting ring Machine comes from the kitchen of a hotel and was only very rarely in use when the new chef in the last 5 years You is in very good condition, still should be cleaned thoroughly before use Video about test run and more pictures available

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Dorr-Oliver Deutschland GmbH / Buckau Wolf, Type Supraton S-200.7.4.5., No 5340, New 1995, Colloid mill in line , House material stainless steel , Rotor material stainless steel , Rotor sizes dia.200mm, Inlet dia.35mm, Outlet dia.35mm, Motor 30,0 KW, 400/690 Volt, Floorspace 1,2x0,9 M, Total height 0,9 MCOLLOID MILLSGRINDERS > COLLOID MILLS What you can expect from Foeth: ?Machine is in working condition ?At a reduced price compared to new ?Ready for shipping to any destination worldwide ?You are welcome to inspect the machine in Barneveld, The Netherlands. Visit our website FOETH dot COM for many more machines!

Category: 703: meat and fish processing machines
New in: used
Price: 5.500 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Inotec / colloid mill / Emulsifer NAGEMA Technical data: Type: KM 3.1 11.25 kW, 380 V / 35 A / 50 Hz Throughput approx.: 1200 kg / h Hopper: Stainless steel Machine body: Stainless steel Dimensions: H129 x B61 x T60 cm Diameter funnel: 50 cm Function checked See pictures original condition and accessories! If you have questions, email or call.

Category: 703: meat and fish processing machines
New in: 2007
Price: 14.500 €
Location: Land-de DE 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Micro cutter / colloid mill / Emulsifer STEPHAN Technical data: Type: MC 15 21 A, 400 V / 50 Hz / 11 kW Year of manufacture: 2007 RPM / rpm: 2915 Throughput approx.: 1200 kg / h Hopper: Stainless steel Machine body: Stainless steel Size: H100 x B70 x T70 cm Function checked See pictures original condition and accessories!

Category: 703: meat and fish processing machines
New in: used
Price: 3.078 €
Location: Land-de DE 97786 Motten, Hammerweg 13
Seller: Statt Nahrungsmittelmaschinen

Alexanderwerk colloid mill Inotec JE1-FN Emulsifyers with stainless steel housing Power: 11kW Voltage: 380V Machine runs smoothly and quietly Star - Delta connection of rotary switches Detachable funnel Cutting premises in proper condition Cutting gap can be adjusted via hopper continuously, thus individual refinement of the product can be reached Machine has the usual signs of use and is in the State as of the customers back, she is therefore to clean thoroughly prior to use. Video about test run and more pictures available

Category: 703: meat and fish processing machines
New in: used
Price: 9.450 €
Location: 97786
Seller: Statt Nahrungsmittelmaschinen

Stephan MC10 Mikrocut, Colloid mill, Koialmühle, Emulsifyers, Inotec Voltage: 400V Hedging: 16A Performance: 7500W Speed: 3000 rpm Automatic switching from Star to Delta connection equipped with 0, 05 mm cutting ring Machine is in very good condition, still should be cleaned thoroughly before use Video about test run and more pictures available

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
New in: new
Price: request quote
Location: Europa
Seller: Peter Heidenreich Maschinenhandel

Many thanks for your interest on our machines, please find follow our offer: manufacturer: Neaen SK Type: Enigma CM-15 colloid mill YOM: New Motor: kw 15 Elektrik: 400V, 3-Phasen Material: AISI304 / AISI316L Different: No seal, machine can run dry without product ex Works europe, unpacked I offer this machine in New condition, warranty 6 months

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
New in: new
Price: request quote
Location: Europa
Seller: Peter Heidenreich Maschinenhandel

Many thanks for your interest on our machines, please find follow our offer: manufacturer: Neaen SK Type: Enigma CM-5 colloid mill YOM: New Motor: kw 5,5 Elektrik: 400V, 3-Phasen Material: AISI304 / AISI316L Different: No seal, machine can run dry without product price Euro, Net (excluded Vat), without any Tax, ex Works europe, unpacked I offer this machine in New condition, warranty 6 months

Category: 1200: machines and plants for process engineering
New in: 1994
Price: request quote
Location: München
Seller: Werner GmbH & Co. Strassenreinigung KG

Toothed colloid mill of the company FrymaKoruma technical data: - flow rate: 700-7000 l / h - Installed power: 15 kW - Dimensions: length: 900mm; Width: 430mm; Height: 450mm - Weight: 300kg - motor: electric motor factory Brienz AG F160 L-2 Performance: 18,5kW; Rotation: 2930 turn/min Description: The offered dental colloid mill is suitable for grinding of liquid and viscous products and crushed the product to a particle size of ~500-100µm. The blades of the mill are ground down and should be replaced. Otherwise, is the mill in perfect condition and can be visited at any time on the ground.

Category: 1200: machines and plants for process engineering
New in: 1981
Price: 1 €
Location: Land-fr FR JANVILLE
Seller: IND-EQ

Hard SS vessel Jacket 8 mm Interchangeable sieve in the door Original elastomer coating on stainless steel propeller Power 15 KW

Category: 703: meat and fish processing machines
New in: 1993
Price: 5.390 €
Location: 97786
Seller: Statt Nahrungsmittelmaschinen

Fryma MZ50B tooth kolloid mill Colloid mill with teeth and an adjustable cutting gap Machine runs evenly and quietly Machine cabinet with integrated frequency inverter and potentiometer for infinitely variable speed control Circulation system with pressure tank and jacket Can be integrated into an existing pipe performance system directly from milk thread connections Containers with overpressure valve, reconstruction also under vacuum can be operated Machine has wear, but is in decent condition, is to clean thoroughly prior to use. Video about test run and more pictures available

Category: 709: other food machines
New in: used
Price: request quote
Location: Land-es ES
Seller: HFGUILLEN MAQUINARIA

Tamizadora-pasadora. 5, 5kW. 1465Rpm. Screen dimensions: ø 300mm, 500mm long, 3, 5mm holes. Overall dimensions: 700mm width 1300mm length, 1470mm high.

Category: 1200: machines and plants for process engineering
New in: 1980
Price: request quote
Location: Land-ch CH Aesch / BL
Seller: UNIGROUP AG

Mobile colloid mill incl. hopper etc. 7.5 kW. Capacity: ca. 20'000 litre/h.

Category: 1200: machines and plants for process engineering
New in: new
Price: 3.696 €
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 4000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 11,0 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 1200: machines and plants for process engineering
New in: new
Price: 2.898 €
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 2000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 7.5 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 709: other food machines
New in: new
Price: 2.898 €
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 2000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 7.5 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 705: pharmaceuticals and cosmetics machines
New in: new
Price: 2.898 €
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 2000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 7.5 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
New in: new
Price: 2.898 €
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 2000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 7.5 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 703: meat and fish processing machines
New in: new
Price: 2.898 €
Location: Land-de DE Nienhagen
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 2000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 7.5 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 701: basic foodstuffs and animal feeds machines
New in: used
Price: 2.898 €
Location: Land-de DE
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

New colloid mill, stainless steel 1.4301, up to 2000 kg / h, depending on the degree of fineness, adjustable, 2-40 my, 2800 rpm, 7.5 kW, 380-3-50,. inlet diameter 66 mm outlet diameter 32 mm, with hoppers, with cooling connection, with product feedback

Category: 701: basic foodstuffs and animal feeds machines
New in: new
Price: 2.440 €
Location: Land-de DE Nienhagen
Seller: Lutterberg Anlagen - u. Maschinenbau GmbH

new colloid mill; We supply also mills with greater capacity , 4 kW, up to 400 kg/h, depending on the fineness, With 20 litres Hopper, with cooling connection, with product recirculation, Sainless steel

Category: 703: meat and fish processing machines
New in: used
Price: 1.300 €
Location: Land-de DE 97786
Seller: Statt Nahrungsmittelmaschinen

Karl Schnell turnaround Bowlcutter type 030 older machine, fully functional, must be thoroughly cleaned prior to use 1, 7mm; 2, 5 mm and 3, 5mm replacement blades, discs and seal are supplied with included.

Category: 1200: machines and plants for process engineering
New in: used
Price: 4.250 €
Location: Land-pl PL
Seller: Industrio Service

Used homogenizer/colloid mill made by Unimix. Stainless steel.

Category: 1200: machines and plants for process engineering
New in: used
Price: 3.250 €
Location: Land-pl PL
Seller: Industrio Service

Used colloid mill with capacity hopper approx. 30 liters. Stainless steel construction.

Category: 1200: machines and plants for process engineering
New in: 1999
Price: request quote
Location: Land-de DE Limburg/Lahn
Seller: RoSta Uwe Schaub

Type: MZ/190b No.: 15677/99 Year of construction: 1999 Pressure: 4/6 bar Power: 45 kW Cross bevel grinding set top condition double-acting mechanical seal Dimensions: LWH = 1000x600x500mm Weight: 450 kg

Category: 1200: machines and plants for process engineering
New in: 2002
Price: request quote
Location: Land-de DE Limburg/Lahn
Seller: RoSta Uwe Schaub

No.: 76115/02 Year of construction: 2002 Product 4/8 bar pressure (depending on the mechanical seal single or double) Power: 15kW Grinding set cross gears in stainless steel excellent condition, little run Dimensions: LWH = 800x400x400mm Weight: 250 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE Limburg/Lahn
Seller: RoSta Uwe Schaub

Type: K60 / S No.: 84061 Power: 2.2 kW / 380V Cross bevel grinding set like new, stainless steel Head polished Round cable with fitting Off switch with lockable handle Origin: Pharmaceutical Dimensions: LWH = 500x250x900mm Weight: approx. 50 kg

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE Limburg/Lahn
Seller: RoSta Uwe Schaub

No. 71074 Power 22 kW, 2900 min-1 Set of grinding teeth cross, diameter 150 mm good condition on mobile cart with switchgear inline or with funnel approx. 80 l Dimensions without funnel LWH: 700 x 600 x 1150 mm Weight approx. 200 kg

Category: 1200: machines and plants for process engineering
New in: 1990
Price: request quote
Location: Land-de DE Limburg/Lahn
Seller: RoSta Uwe Schaub

Colloid Mills KK 60 Koruma 1) No.: 4575 Set of grinding teeth cross Off switch Funnel with a circulation pipe and three-way cock Machine unused, pharmakonform Spare parts seals 2) No.: 4574 Year of construction: 1990 Set of grinding standard gears Off switch Funnel with a circulation pipe and three-way cock Machine unused, pharmakonform Spare parts: Seals

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: Land-de DE Limburg/Lahn
Seller: RoSta Uwe Schaub

Volume up to 25 l Container with double jacket (heating, cooling) swivelling, vertical water hydraulics Temperature gauge, gauge lights Part to funnel feeder under mirror Drain valve in the bottom Vacuum pump Mixing organs: (1) Colloid mill Homogenizer, adjustable (2) Scraper agitator (3) Dissolvermischwer Ø100 all mixing organs separately switchable Machine wheels Weight: 300 kg Dimensions: LWH = 1000x600x2000mm Condition very good

Category: 703: meat and fish processing machines
New in: used
Price: request quote
Location: Land-de DE Schleswig
Seller: Die fliegende Käserei

colloid mill FAMAC flow rate: ca. 1800 kg feed hopper: ca. 30 Ltr. typ: KM 3.1 year of construction: 2001 technical details: engine power: 11 KW voltage: 400 V current-carrying capacity : 22 A weight: ca. 240 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)