127,433 used machines on RESALE, but how to find them? Machine Search
In good condition CO2 installation & cold room build in 2021. Cold room temperature +-4°C and a evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and a isolation value of RC 5,21. Further the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machineset and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a low-temperature Bitzer 2HSL-3K-40S & medium-temperature Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a D ...
NN room for laser sorting, s/s isolated panels with 2 Sterkel sliding doors, type: 20, fabrication number: 2973701 & 2973702, year of construction: 9 2003, dimensions: 880 mm x 80 mm x 2030 and 1280 mm x 80 mm x 2220 mm, total dimensions: 5100 mm x 4600 mm x 4350 mm.
The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel
Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.
CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC
General SKU316W637 LocationBarneveld MakeMixaco TypeCM-30 No.SN050024 Year of construction2005 Main Features MaterialStainless steel Volume24 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercheck Capacity24 l Vessel sizesø 400 x 300 mm Inlet400 mm Manual operated outletcheck Outletø 125 mm With motor5.5 kW (400V, 1425 rpm) Rotor speed1425 rpm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Total height1,25 m Weight250 kg Floorspace1,40 x 0,90 m Extra SpecificationsWith 2x mobile barrels, volume 24 l each.Cold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...
General SKU203P131 MakeMixaco Maschinenbau GmbH (DE) TypeLAB CM 6-MB No.080139 Year of construction2008 Mounted on framecheck Main Features MaterialStainless steel Volume6 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercontainermixer Capacity6 Ltr (nett) Vessel sizesdia.260x160mm With cover(jacketed ) Manual operated outletdia. 75mm Max. temperature90 Degr .C. With motor5,5 KW, 400 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1.1x0.8 M Total height1,9 M Weight350 KGCold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.
used
Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP
Used PRALINES production line: Producer: Aasted-Microverk APS. Model: 275 MINI for a cold stamp Year: 1996 (commissioning year 1997) The line used in 1997-2014 (2015) Description: forms: approx. 3500 items (molds are in different technical condition) Types of Forms: · Molds - number of places for pralines - 28: o "rectangular" forms 28 places for pralines (14 pralines, "violin" shape, 14 pralines each) trumpet shape) o "rectangular" forms 28 places for pralines (14 pralines, harp shape, 14 pralines each) shape "piano") o Molds in the shape of a "trunk" 28 places for pralines o "Small ball" shaped molds 28 places for pralines o "Big ball" forms 28 places for pralines o "Square" forms 28 places for pralines There are approx. 2500 items of this kind. · Molds - number of places for pralines - 56: o Forms "bears", "cats" 56 places for pralines (28 "bears", "cats" each) ...
Key data: 150 mm
Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg
Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
Chiller - Euro Cold 09-CF-02960 / New, unused Year of Make: 2014 Location: Lodz, Poland Description: Cooling capacity approx. 45 kW Refrigerant R407C The device has: - 1 compressor - Separate container for medium - Barrel pump -Radiator - Fan x 2 The device has an additional heating function and can be used to control the temperature of tools The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Grundy Tank 400L / 90Gallon Insulated and Clad in welded Stainless Steel 50mm of insulation Bolted top lid with internal cooling coil attached Temperature probe pocket working pressure 30psi This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
The line consists of the following components: 1 - Single-Screw Extruder (Ankle) - Type :Single-screw extruder (Ankle) - Description : Gentle compression through optimized screw design. Output up to 120 kg per hour. Original manufacturer drawings available. - L/D Ratio : 60/30 - Motor Type MDFQARS 132-32 with insulated B bearing - Gearbox Type : FZ 600.2-Z-ED 60 - Control System: EXTRUSION PACK control unit by RESOTEC. Has functioned very well in operation. 2 - Water Cooling Bath - Description :Water bath cooling line with continuous cooling water supply. High-capacity plate heat exchanger included. - Tank Capacity : 440 liters (at full fill) - Cooling Control :Controlled via continuous cooling water feed - Width : 50 cm - Depth : 35 cm - Length : 252 cm - Height-Adjustable Feet (current setting) : 72 cm 3 - Granulator - Manufacturer : C.F. Scheer and Cie - 70435 Stuttgart, Germany ...
General SKU099Y827 MakeMixaco TypeLab. CM-12 Disp. No.SN 010280 Year of construction2001 Mounted on framecheck Main Features MaterialStainless steel Volume12 Ltr. Motor3 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity10 Ltr (useful) Vessel sizesdia. 250x135mm, Conical bottom 120mm Manual operated outletdia. 70mm With motor3,0 KW, 230/415 Volt With variable speed drive(frequency converter) MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1,5x1,0 M Total height1,7 M Technical specs Extra informationconical bottom 120 mmDiscountCold mixersMixacoDiscountPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...
General SKU030H080 MakeMixaco Maschinenbau Neuenrade TypeLab CM 6-12 No.22.3406 Year of construction1999 Mounted on framecheck Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume12 Ltr. Motor4 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity4,8-10,0 Ltr (useful) Vessel sizesdia. 260x155mm, Conical bottom 135mm With covercheck Manual operated outletdia. 80mm With jacket(jacketed cover) With motor4,0 KW, 400/690 Volt With variable speed drive(Frequency inverter) With timercheck MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1,5x0,8 M Total height1,4 M Weight300 KG Technical specs Extra informationconical bottom 135 mmDiscountCold mixersMixacoDiscountPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- ...
General SKU094F478 MakeGebr. Ruberg Maschinenfabrik Nieheim TypeFCM-200 SR No.171/11577 Year of construction2001, Suitable for barrels dia. 582x1015mm Mounted on framecheck Main Features MaterialStainless steel Volume200 Ltr. Motor7.5 KW Specified Features - Cold mixer Cold mixerBatch barrel mixer (1x) Vessel sizesdia. 650x400mm With motor7,5 KW, 400/690 Volt With lump breakercheck With motor4,0 KW, 400/690 Volt MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchgearcheck Floorspace2,1x1,5 M Total height2,8 M Weight2350 KGDiscountCold mixersGebr. RubergDiscountPlastic machinery > Cold mixersBrand > Gebr. Ruberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...
General SKU004U068 MakeThyssen Henschel TypeTK/D 125 No.850026 Year of construction1993 (has never been used) Mounted on framecheck Pressure Working pressure jacket5 Bar Main Features MaterialStainless steel Volume7.5 Ltr. Motor15 KW Specified Features - Cold mixer Cold mixerContinuous high speed mixer (1x) Capacity7,5 Ltr Vessel sizesdia. 125mm Max. temperature200 Degr. C. With jacket(2,5 Ltr) With motor15,0 KW + 5,5 KW, 500 Volt (Ex) Rotor speedOuter mixing tool 60-2000 Rpm/Inner 1500 Rpm MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace3,5x0,5 M Total height1,0 M ATEX compatiblecheck Extra Specifications- Easy clean - 2 counter-rotating mixing tools DiscountCold mixersThyssen HenschelDiscountPlastic machinery > Cold mixersBrand > Thyssen Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced p ...
Refrigerated counter Coldline Master GN 2 for fast and flexible application Model No.: TS13/1M-760 Stainless steel version Cooling range - 2 to + 8°C adjustable Convection cooling Device is plug-in, 2 doors Connection 230V Dimensions: 1300 x 680 x 860 mm, WxDxH Used device
Refrigerated display case Dilara 180 Convection refrigerated display case 4 stainless steel shelves verst. Sliding doors made of insulating glazing Temperature adjustable from +3 to +15°C Coolant R 290 only DGUV V3 tested by us Measurements; 1800 x 750 x 2000 mm, WxDxH Connection: 230V, 1166 Watt Demonstration device & SAB tested
MANUFACTURER GMP WIDTH (MM) 1550 HIGHT (MM) 1210 WATT 100 AMPERE 0.4 MORE INFORMATION LAMINATING SIZE: 1120MM TYPE EXCELAM-Q1120COLD/RS DEPTH (MM) 610 VOLT 230
General SKU053E227 MakeMixaco Maschinenbau Neuenrade TypeCM-1000 S No.22800 Year of construction1992 Mounted on framecheck Main Features MaterialStainless steel Volume800 Ltr. Motor37 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacitymax. 800 Ltr (useful capacity) Vessel sizesdia. 1450x1000mm (conical vessel) With covercheck Outletdia. 500mm With motor37,0 KW, 380/660 Volt With motor4,0 KW, 220/380 Volt tilting motor MaterialStainless steel Information LocationBarneveld With switchcheck Floorspace2,9x1,9 M Extra Specifications-- RECONDITIONED -- Technical specs Extra informationconical vesselDiscountCold mixersReconditionedMixacoDiscountPlastic machinery > Cold mixersReconditionedBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixerContainer mixer (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new OEM vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Technical specs Extra informationbrand new oem vessel DiscountCold mixersReconditionedMixacoDiscountPlastic machinery > Cold mixersReconditionedBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.
SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration
SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration
Ripening cold room EMS external dimensions approx. 210wx220dx245h cm, control separately, ripening unit under the ceiling, no own floor, fully clad inside, purchased in 2004 for 4,143.13 EUR net, BW 31.08.25 1,- EUR net, unit purchased in 2004 for 5,196.86 EUR net, BW 31.08.25 1,- EUR net, control purchased in 2005 for 5,096.- EUR net
Following the acquisition of a building, the new owner wishes to resell the equipment of a former bakery. Among the equipment offered, a cold room is to be dismantled on site and sold as is. Last service carried out in 2022. The equipment is currently functional. Auction-ID: A3-43497-35339
Equipped with: temperature setting 2 to 25 degrees, 50 A, volume 1660 liters Auction-ID: A1-40101-80
Equipped with: temperature setting 2 to 25 degrees, 50 A, volume 1660 liters Auction-ID: A1-40101-81
Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact
Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pressure force: 0.23 ton -for: window making tools -pneumatic with: foot control -pneumatically operated -Air pressure: 12 bar -Stroke: max. 50 mm -Insertion height: mm -Dimensions: 690/720/H1485 mm -Weight: 51 kg
Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.
Multifunction punch, punch, hole punch, pneumatic punch -pneumatically operated -Year of construction: 2001
x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t
Control: manual 3-axis Manual Read-Out Max.travel range: X 600 mm Y 400 mm Z 400 mm Clamping table: 400 x 600 mm Spindle speed ? 63 - 3150 rpm Taper ? SK 40 Made in Czech Republic
Empty 40ft container for genset Ideal for Caterpillar 3516 or similar Available immediately. Very High specs container - for further details and information contact us at: Enquiries@ukpowergeneratorsltd.com
We have a empty container ideal for jenbacher 208 and jenbacherb316 for sale. This container can be easily moved to the desired location. For pricing and further information, please feel free to contact. Available for sale... The empty container with highly specialised flooring and walls considering the equipment to be installed in there. The container pictures are attached to this advert, as seen. Everything inside the empty container. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924
This workstation was configured for a cleanroom class D and max. for OEB3 substances (medium toxic material) Via the laminator in the bonnet area, H 14 filtered clean air in ISO 5 quality in accordance with EN 14644-1 with unidirectional flow and a flow velocity of 0.17 m/s to 1.00 m/s - depending on the product and task - is channelled into the interior of the barrier above the product, creating a cleanroom zone. The visible surfaces are made of stainless steel 1.4301 and are brushed (RA
Locker changing room 1800 x 1200 x 500 RA2221 Manufacturer: unknown width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
Manufacturer: Schuko, Year: ca.1990, Control: yes, Supply air filter covers: 1, Heizmedium : Warmwasser, Splashback dry: yes, Length max mm: 3000, Width max mm: 1600, Number of spray booths: 1, Supply air system: yes, Hand spraying stations: 1, Absaugfläche m²: ca.4, Zuluftgerät kW Leistung 1: 89,6, Heating agent warm water: yes, Engine power kW: ca 4, Ceilings for incoming air: 1, Year :ca.1990
Manufacturer: Reinraumkabine, Control: yes, Supply air filter covers: yes, Heizmedium : Warmwasser, Electronic control board: yes, Working height: 3200, Wet splashback: yes, Length max mm: 3000, Inner hight mm: 2890, Sliding doors: 1, Number of spray booths: 1, Number of evaporation booths: 1, Zuluftfilterdecke m²: 25, Floor extraction: no, Supply air system: yes, Grösse L X B X H mm: 18000 X 7000, Radial fan: 2, Ceilings for incoming air: 1, Heating register: 1, Supply air system: yes, Sliding doors: 1,
Manufacturer: Berkmann <CRLF>Zuluft und Abluft<CRLF>Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009
maximum number of results exceeded
please refine your search
5.000 € 
