cold circular saw used for sale

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

Key data: 550 mm

Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)

Key data: 4300 mm, 2200 mm

EXHIBITION MACHINE Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cut, infinitely variable from 6-25 m/min. incl. the following accessories: - Suction CE - Pneumatic aluminium sliding shelf - Medium workpiece support - Longitudinal fence with digital dimension display - Stripe stop - Digital dimension display for horizontal cutting on the control panel - 3 adjustable anchorage points in the saw bar - SuperCut scoring device incl. 2 WPL knives - Narrow parts line (2 pieces)

Connected load 380V 6.6A 3kW Cutting height approx. 440mm Cutting width approx. 650 mm Band saw length 5110 mm Attack Suction 100 mm Machine table swivel with handwheel Foot brake

Connected load 380V 2.2kW Cutting height 300 mm Cutting width 570 mm Suction 120 mm Band saw guide at the top and bottom Attack Total height of the machine approx. 2100 mm

Key data: 5300 mm, 2100 mm

Power sawing unit 4.6 kW Cutting length 5300 mm Cutting height 2100 mm Cutting depth 80 mm Total machine height 2900 mm Strip attack Weight approx. 700 kg Saw blade Ø 300 mm Hinged rail

Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3800 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Only 2200 operating hours

ZIM Hülsta Rear Wall Saw Make: ZIM Hülsta-Werke Description: Backwall saw Year of Make: 2014 Serial Number: 380114008 Description: 2 movable Benz saw/drill units Feed roller table Protective enclosure with Leutze laser barrier system Switchboard Extraction piping Control terminal, consisting of: PC, flat screen EIZO FlexScan S1911 Keyboard and mouse, handheld scanner, terminal cabinet Mobile steel skip (beige) More items - new and used - can be found in our shop! International shipping costs on request!

Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device

cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Saw blade dimensions 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - Cutting range at 90° around 80 mm - flat 95 x 60 mm - Mitre adjustable up to 45 ° - Material vise - Drive 400 V / 0.5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

cutting diameter: 260 mm saw band length: . mm cutting width: . mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade metal SELECT Length: 30 m Dimensions: 12 x 0.65 mm

Saw blade metal WIKUS Biflex 2ZpZ clawtooth Dimensions: 8128 x 50 x 1.30 mm

Saw Blade Metal KASTO M42 2ZpZ Dimensions: 8028 x 50 x 1.30 mm

Saw blade for metal circular saw (segment saw blade) Pagus Ø 770 mm ( Ø770mm ) Width: 6.2 mm Hole holder inner diameter: 80 mm Bolt circle of the 4 holes 160 mm

Saw Blade Sharpening Machine VOLLMER CV 1 year: 1956 height with pulley: 2900 mm motor: 0.55 kW with extraction 0.2 kW voltage: 220/ 380 V ( built-in socket without function ) used, tested ! Dimensions: 800 x 900 x 1600 mm

MEP Condor 90 CNC HR BJ Säge 2002 BJ Barrenmagazin 2013 Find more here - / Contact us at -

Hole Saw Assortment EXACT Eventus Bi-Metal Hole Saws General Assortment 2 in Plastic Case Item No. 06085 Ø 20, 25, 30, 35, 40, 45, 50, 68, 75, 83 mm 4-6 teeth per inch Dimensions: 280 x 235 x 85 mm

HOLZKRAFT FBS-740-2 F32 Bandsaw Voltage: 400 V / 50 Hz Motor Power: 5.5 kW Max Cutting Width: 710 mm Max Cutting Height: 500 mm Max Cutting Speed: 1000 m/min Weight: 880 kg Find more here - / Contact us at -

Metal saw blade, saw blade WIKUS BIFLEX VARIO M42 4120 x 27 x 0.90 mm 10 - 14 ZpZ ( teeth per inch ) Length: 4120 mm Width: 27 mm Thickness: 0.9 mm New ! Dimensions ( packaging ): 430 x 430 x 55 mm

Manufacturer: KASTO Model: KASTOflex F Year of Manufacture: 2018 Technical Specifications - Dimensions (LxWxH): 4800x1500x1900 mm - Weight: 2,700 kg - Power Supply: 400 V - Power: 13 kW Find more here - / Contact us at -

Saw blade for metal circular saw, segment saw blade WMW Ø 710 mm tooth 6 96 teeth tooth 6 width: 4.0 mm hole holder inner diameter: 80 mm bolt circle of the 4 holes: 160 mm Dimensions: 710 x 710 x 4 mm,

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Saw blade for metal circular saw, segment saw blade NEUBERGER 40 500 29 ( 4050029 ) Ø 500 mm 120 teeth width: 4.0 mm hole holder inner diameter: 60 mm Bolt circle of the 2 holes: 70 mm Dimensions: 500 x 500 x 4 mm,

Saw creel esterer hdn600 hydraulic saw span hydraulic chip carriage sparrow cape saw

Saw blade for metal circular saw, segment saw blade WMW, HOHENSTEIN 54060 Ø 400 mm 96 teeth width: 4.0 mm bore: 50 mm bolt circle of the 4 driver holes: 80 / 85 mm spare part e.g. for Hohenstein RBT400 ! suitable gearbox G84 !' used, tested ! Dimensions: 420 x 420 x 10 mm ,

Metalworking machine Circular saw cutting line MACO VK370, model VK AR ALU. Manufacturing year 2013. This is a fully automatic saw with a +/-45 degree rotating blade. It has been in production work about 3-4 years. Find more here - / Contact us at -

SPECIFICATIONS: Saw blades: max. Ø 320 mm Installed power: 22 hp Conveyor belt width: 250 mm 2 feed speeds Cutting height: max. 100 mm Motorized height adjustment Extraction opening: Ø 150 mm

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW

- High-performance automatic band saw, heavy, hydraulically production band saw - Parallel sawing feed system in profile guide notes - Mitsubishi NC program control E1032 for preselection of 90 sets, a respective quantity and a corresponding Section length - PLC control Mitsubishi - With Siko incremental encoder - Material feed with ball screw 950 mm in one stroke, any section length from 3 mm - 9999 mm - Hydraulic material clamping with long-stroke cylinder, opening from both sides - Material clamping with double vice in front of and behind the saw blade - Remnant length in automatic mode: 90 mm - Max. section length in car operation: unlimited - Material support height 850 mm - Incl. 6 metre runway - Coolant tank 50 l

1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

besaummer automat Wurster Dietz fr97 komplete anlage built in 1997

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

C.T.S. Gemini 8002 with simens Simatic and bar feeder The C.T.S. Gemini 802 is an industrial machine designed for precision cutting and processing of materials such as metal or plastic. Manufactured by C.T.S. (Cutting Technology Systems), the Gemini 802 model is known for its efficiency and accuracy in various industrial applications. Key Features: - Cutting Capacity: The Gemini 802 is equipped to handle a range of material sizes, providing versatility in cutting operations. - Automation: Incorporates automated features to enhance productivity and reduce manual intervention. - Precision: Designed to deliver high-precision cuts, ensuring minimal material waste and adherence to specified dimensions. Find more here - / Contact us at -

Offer 24149 Specifications: - Cutting range at 90° around 320 mm - flat 300 x 270 mm - Material replenishment stroke up to 500 mm - Unlimited multi-stroke - Remnant length in automatic mode 125 mm - Saw blade dimensions 3900 x 27 x 0.9 mm - Cutting speed 17 to 106 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - hydr. Material vise -Conveyor - Saw blade cleaning brush - Coolant device - Drive 400 V / 2.2 kW - Space requirement approx. W 2300 x H 1700 x D 2600 mm - Weight approx. 1700 kg - Roller conveyor 2000 mm

Mössner Rekord SM400 band sawin good condition

Woodchip and saw dust extractor, available immediately. More info on request. Location: 2311 Hoče Slovenia.

Key data: 260 mm, 3660 mm

very well preserved FORTE , at call

Metal band saw OPTIMUM OPTIsaw S275N - Exhibition machine - feed infinitely adjustable, swivelling ---------- Technical data ---------- Swivel range: 0 - 60 Â, cutting height: 150 mm, cutting depth: 230 mm, saw blade speed: 45 / 90 m/min., saw blade length: 2,480 mm, motor 400 V: 1.1 kW, dimensions (LxWxH): 1,400 x 530 x 1,360 mm, weight: 185 kg - new exhibition machine -

Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t

PART NUMBER: 7540 Specifications: - max disc diameter 350mm - spindle diameter 30mm - up/down adjustable dial - electric brake - shield guard - max cutting height for the blade 350mm - 100mm - min saw spacing 250mm - max saw blade spacing (edge saw blade spacing) 2500mm - max cutting length 2170mm - electric saw spacing - with a scorer - max scorer disc 130mm - spindle diameter 20mm - power of the scoring motors 2×0.75kW - main motor power 2x4kW - bottom bracket motor power 0.37kW - 2 types of rotation speed 3000,4500 rpm - extraction spigot diameter 2x120mm, 2x80mm - total dimensions length/width/height 4500x3000x1600mm - weight about 1100kg Advantages: – Polish production – electric saw spacing – DTR documentation – very good condition – used double saw Net price: 32900 PLN Net price: 7651 EUR depending on the price 4.30 EUR (Prices ...

PART NUMBER: 7522 Specifications: - max cutting length 3100mm - max cutting thickness 100mm - max cutting width 640mm - distance gauge - main saw motor power 11kW - feed motor power about 2×2.2kW - feed speed (continuously variable transmission) 10-50m/min - pressure beam - blade diameter 450mm - work table height 860mm - working table width 650mm - extraction spigot diameter 3x180mm - total dimensions length/width/height 5600x2200x1800mm - weight about 3000kg ADVANTAGES – Belgian production M.D'Hulster – for edging boards – DTR documentation – used saw, very good condition Net price: 32900 PLN Net price: 7651 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

cutting diameter: 500 mm saw band length: 6990x41x1,3 mm cutting width: 860x500 mm cutting speed: 15-90 m/min Feed: 400 mm/min Rapid movement: 2500 mm/min main drive motor: 5,5 kW cutting length min.: 8 mm total power requirement: 8,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,3x1,2x2,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 150 mm

Cross-cut saw with saw blade D 600 Roller conveyors at the entrance material Roller conveyors at the outlet material with folding stop W 250 mm Roller conveyors can be expanded per metre

Pilous band saw especially for 3D printing Inclusive: Belt tension indicator Frequency-controlled saw blade drive 20-130 m/min. Mechanically driven chip brush Minimum quantity lubrication Specifications: Maximum cutting height and cutting width of the printing plate: 300 x 300 mm Material support height: 900mm Drive motor: 2.2 KW Weight: 500 KG Accessories: Suction box Manipulation table Splash cooling Machine Dimension: Width 800mm / Depth: 1740 / Height 1770mm From stock / Thalheim near Wels

SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication

SPECIFICATIONS: Installed power: 1.8 kW Voltage: 230 V Saw blade: Ø 380 mm