cold circular saw used for sale

Dry ice cleaner with only 108 operating hours and flexible use of all types of dry ice ColdJet SDI 60 Select ice blasting machine from 2013 With blasting hose, blasting gun (applicator in industrial design with lighting), grounding cable, round nozzle 11mm and flat nozzle 45mm with integrated 3-stage scambler Power supply: 230Volt maximum dry ice capacity of the container approx. 27kg Dry ice consumption adjustable from approx. 0 to 160kg per hour Jet pressure range from approx. 1.4 bar to 17 bar Compressed air requirement depends on the nozzle used The gun with integrated light and the ability to switch between only air and air + ice is very practical The device can be used with 3mm dry ice pellets, or alternatively with ice blocks, discs and nuggets, in which case the required ice is scraped off. So you can flexibly use any available dry ice. Instruction manual in English ...

COLD JET DRY ICE BLASTING MACHINE COLD JET MODEL 2000 DRY ICE BLASTER GOOD CONDITION EXWORKS HAMBURG GERMANY VOLTS 230 AMPS 4 PHASE 1 FREQUENCY 50/60 FULL LOAD AMPS 4 MOTOR AMPS 2.5 HP 1 SHORT CIRCUIT INTERUPTING CAPACITY 300A MAX OPERATING PRESSURE 300 PSI / 20.7 BAR SHIPPING WEIGHT 315 LB / 143 KGS

Star Cold Water Chiller 2015, Two fan system, refrigeration R404A, 3Ph

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

MEP Tiger-350-SX Metal Circular Saw Cold Circular Saw Semi-Automatic; -Manufacturer: MEP; -Type: Tiger 350 SX; -Year of construction: 1990; -Saw blade: 350 x 32 x 2.5 mm; -Round sawing range at 90°: 115 mm; -Flat: 180 x 95 mm; -Speeds: 15/30/45/90 rpm;

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Cold circular saw, metal circular saw, mitre saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 1000 mm -Max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

Vice for cold circular saw, saw vice -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg

Mitre Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture approx. 1980 Saw range at 90 Round 110 mm Saw range at 90 Rectangle 160 x 90 mm Saw range at 90 Square 95 x 95 mm Saw range at 45 Round 95 mm Saw range at 45 Rectangle 120 x 90 mm Saw range at 45 Square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchable Mains connection 380 volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45- Material Clamping vice with quick-release eccentric lever - Coolant device with electric coolant pump - Material stop 350 mm- Sawing blade with 335 mm installed - Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition; used

Cold circular saw, metal circular saw, metal miter saw -max. saw blade: Ø 275 mm -with coolant device: -Saw blade speed: 30/60 rpm -Cutting area: 90° flat 100 x 75 mm -Cutting area: 45° flat 40 x 75 mm -swiveling: -Dimensions: 1455/875/H1590 mm -Weight: 224 kg

Cold circular saw, metal circular saw, metal miter saw -max. saw blade: Ø 315 mm -with coolant device: -Saw blade speed: 40/80 rpm -Cutting area: 90° flat 100 x 75 mm -Cutting area: 45° flat 40 x 75 mm -Burr-free cut: thanks to a double vice -swiveling: -Dimensions: 1030/560/H1700 mm -Weight: 222 kg

Description Universal cold circular saw machine from eisele brand suitable for small and large series Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown Technical data -Saw blade diameter: 450 mm -Gearbox with 4 speeds: 6/12/24/48 rpm -Clamping pressure reduction for: Clamping device -Cutting pressure-dependent saw blade shutdown -Drive: 3/3.6 kW -with: coolant device -Cutting range at 90 degrees Round: 145 mm -Cutting range at 90 degrees square: 130 mm -Cutting range at 90 degrees flat: 240 x 70 mm -Cutting range at 45 degrees Round: 145 mm -Cutting range at 45 degrees square: 125 mm -Cutting range at 45 degrees flat: 170 x 70 mm -Cutting range at 30 degrees Round: 120 mm -Cutting range at 30 degrees flat: 120 x 70 mm -Profile size: max. 320 x 30/280 x 80 mm -Dimensions:  ...

saw blade diameter: 500 x 50 mm cutting diameter: 180 mm turning speeds: 3000 U/min capacity 90 degrees: round: 180 mm capacity 45 degrees: round: 180 mm capacity 90 degrees: square: 150 x 150 mm capacity 45 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 300 x 125 mm capacity 45 degrees: flat: 145 x 120 mm voltage: 400 V / 50 Hz total power requirement: 4 kW weight of the machine ca.: 430 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 x 50 mm cutting diameter: 130 mm turning speeds: 3000 U/min reus: variabel einstellbar U/min capacity 90 degrees: round: 130 mm capacity 45 degrees: round: 115 mm capacity 90 degrees: square: 110 x 110 mm capacity 45 degrees: square: 100 x 100 mm capacity 90 degrees: flat: 250 x 85 mm capacity 45 degrees: flat: 160 x 70 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 380 Kg dimensions of the machine ca.: 0,8 x 0,7 x 1,3 m • Cold circular saw for aluminium, • with pneumatical double clamping of the workpiece, • clamping is adjustable horizontally and vertically, • equipped with mist lubrication, • adjustable saw blade feed, • additional roller conveyor: Height = 850 - 1200 mm, Width = 250 mm, Length = 1000 mm, with 4 posts, Price: € 290.00 The data for this ad was created with ModulMWS - the software solution of  ...

Description: Manual cold circular saw with: - Machine base - Support rail - Quick release device Saw blade diameter 315 mm Cutting range at 90 degrees: around 100 mm Cutting area at 90 degrees: square 90 mm Speed 35 / 70 rpm Saw blade dimensions 315 mm Machine weight approx. 350 kg Space requirement approx. 800 x 800 x 1400 mm weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 800 x 1,400 mm

Description: Cold circular saw with: Saw blade diameter max. 350 mm Cutting area: around 110 mm Cutting area: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Space requirement approx. 0.8 x 1.0 x 1.85 m weight approx.: 480 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,000 x 1,850 mm

saw blade diameter: 250 mm cutting diameter: 50 mm revolutions per minute: 27/54 U/min output: 1,5 kw dimensions: 1,4 x 0,75 x 1,3 m weight of the machine ca.: 0,6 kg Used automatic cold circular saw - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Semi-automatic aluminum cold circular saw with two speeds. Saw blade diameter 400 mm Cutting diameter 130 mm Speed range 1420 / 2840 rpm Total power requirement 4.5 kW Machine weight approx. 0.6 t Dimensions L x W x H 1.1 x 0.9 x 1.8 m weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 900 x 1,800 mm

Description: Cold circular saw with - Semi-automatic - Miter on both sides - Coolant system - hydr. Workpiece clamping Saw blade diameter 400 mm Cutting diameter 130 mm Cutting speed 30 - 130 m/min Total power requirement 1.5 / 2.6 kW Machine weight approx. 0.55 t Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,700 mm, weight approx.: 550 kg

Used cold circular saw Internal machine number m3331 Manufacturer Kaltenbach Type TL 500 Ma.Number 14238 Year of construction unknown Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as e.B. technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out ...

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,

Make: Omes Type: Tramatic 370S Year of construction: 1988 Saw blade diameter: 350 mm Features of this machine are: -mechanical pneumatic Vice -hydropneumatic feed can be adjusted (see Control Panel) -Saw process and open the Vice manually or automatically -After reaching the depth of saw the saw head will return automatically to its basic position Saw capacity - 90 ° degree cut -Diameter of 130 mm -100 x 100 mm rectangular tube -Fermentation cuts adjustable - right-hand and left-hand fermentation, if necessary in a voltage Machine has been little used

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

TUGRA ALU - COLD SAWS TYPE DK 400 -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Material Panel met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE II VEGA -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Nevelsmeerssysteem -Rollenbaan 300 cm met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE VEGA M II -Zaagblad 400 mm -Verstek Dubbel -4 pneumatic clamps -Nevelsmeerssysteem -Rollenbaan 300 cm met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE BETA PLUS -Zaagblad 300 mm -Verstek Dubbel -Zaagkop kantelbare -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE ALFA -Zaagblad 300 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

UWM KALTKREISSAEGE TYPE 315 â Zaagblad 315/350 mm - Dubbel vertek - 2 Snelheden - Koeling - Beschermkap - Noodstop - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

OZCELIK ALU-KALTKREISSAEGE TYPE METEOR I 500 - Half-automaat - Zaagblad 500 mm - Dubbel vertek - 4 pneumatic clamps - Nevelsmeerssysteem - Roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

TUGRA ALU-KALTKREISSAEGE TYPE AC-400 - Zaagblad 400 mm - Dubbel verstek - 4 pneumatic clamps - Nevelsmeerssysteem - 1 roller baan 300 cm - 1 roller baan 300 cm met lengteaanslag - Blaaspistool - Beschermkap - Documentatie - 400V DUTCHMACH Metalworking machines ENSCHEDE - NETHERLANDS (3 km from the German border)

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.

Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mm cutting diameter: 100 mm sawblade width: 2,5 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 130 x 90 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: flat: 100 x 90 mm turning speeds: 18 + 36 U/min voltage: 400 V frequency: 50 Hz power capacity: 0,75 - 1,3 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: NA mm cutting diameter: NA mm stroke: mm working area: 90 mm workpiece dia.: 90 x 500 mm feed:: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 x 32 x 2,5 mm : 15/30/45/90 U/min vice: 190 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm capacity 90 degrees: flat: 180x95 mm : 90 mm : 90 mm : 110 mm : 95 mm : 125x95 mm : 110 mm : 95 mm : 125x95 mm total power requirement: 1,8/2,5 kW weight: 375 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 500 mm cutting diameter: 180 mm stroke: 0 mm total power requirement: 3,5 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315/350 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 160x90 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 90 mm capacity 60 degrees: flat: 80x100 mm total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,2 t dimensions of the machine ca.: 0,6 x 1,22 x 1,06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15+30 oder 3+60 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,44 t dimensions of the machine ca.: 0,8 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,71 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m ACTION PRICE ! High Performance Vertical Circular Saw Hydropneumatic Fully Automatic. (20192) · Miter left 60 ° + right 45 ° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Quiet, powerful worm drive with large Gear ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-profile cuts.Additionally with lateral quick shift at miter change · Precision prism guide of the gearhead, laterally adjustable · Particularly stable undercarriage with built-in automatic cooling · Large chip drawe ...

saw blade diameter: 315 mm capacity 90 degrees: round: 108 mm capacity 90 degrees: square: 93 mm : 150 x 90 mm Working height: 920 mm saw blade turning speeds: 17+33 oder 33+66 U/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 0,8x0,9x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 85 mm capacity 90 degrees: square: 75 mm capacity 90 degrees: flat: 100x65 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: square: 75 mm capacity 60 degrees: flat: 90x60 mm total power requirement: 0,8 kW weight of the machine ca.: 0,04 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,5 kW weight of the machine ca.: 0,38 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.