cold circular saw used for sale

Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scorin ...

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of Make: 2017 Cut side passage max.: 215 mm Max. cutting height clearance: 250 mm Table dimensions: L46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base frame on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone meal container (removable) Left-hand delivery Protection Engine brake Function checked, machine immediately ready for use Stock machine, immediately available! Condition & accessories see original pictures.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 130 mm : 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mm dimensions: 350 x 690 x 520 m band speed: 30 - 80 m/min total power requirement: 1,2 kW weight of the machine ca.: 19 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 450 mm : 650x450 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 5320 x 34 x 1,1 mm total power requirement: 3,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,9 x 2,87 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm cutting range round: 115 mm cutting range square: 105 mm cutting length min.: 730 mm cutting range flat: 70 x 240 mm cutting lenght max.: 4000 mm saw blade turning speeds: 1250 / 2500 U/min table rotating: 180 ° stroke: 120 mm feed stepless: 0 - 500 mm/min coolant: capacity 45 degrees: square: 95 mm capacity 45 degrees: flat: 50 x 200 mm cutting speed: 1250 / 2500 m/min weight of the machine ca.: 1,1 t dimensions of the machine ca.: 5,00 x 1,30 x 2,00 m - Fabr. - No.: 28232 und 28233 - pneunatic clamping head - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

see pdf attached

Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t

HOLZMA HCV 11 Angle Center Double Angle Panel Saw Cutting length 4.300 mm Bevel cutting length 2,200 mm Lift width 2,200 mm Number of Grub Teeth 13 Feed rate max 125 m/min Stepless feed Saw Table Top Allowance 125 mm Saw top diameter max 450 mm Main motor 18 kW Undercutter Yes Postforming scoring machine Loading with vakkum jack Feed table rear Yes Turntable in machine table For delicate items Yes Left Stop Page HOLZMA Central pressure device for angle setting Waste flap HOLZMA Electromagnetic Measurement System HOLZMA Power-Lock HOLZMA Soft-/ Postforming VVSH HOLZMA Integrated Face Cutting HOLZMA Two-finger clamp HOLZMA CADMATIC control Other offers - click - Gabiani Biesse Giben Panhans Schelling Meyer Holz-Her Scm Holzma Rema Scheer panel saw loading panel cutting table saw sheet package sheet machining center plate machining center nesting automatic efficie ...

SPECIFICATIONS: 45° glass strip saw Machining area mm: 2,700 x 1,000

: 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 280x200 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: square: 180 mm capacity 45 degrees: flat: 180x180 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 110x110 mm dimensions of saw-band: 2950 x 27 x 0,9 mm output: 1,5 / 1,8 kW Weight: 435 kg dimensions: 1700x1000x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stanko Ø 400 mm

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

Key data: 280 mm

Ref.nr 00898 Name of the system: Used band saw Manufacturer: Bauer HS 280 GZA: For automatic sawing of small diameter ranges, universal application by the miter device, hydraulic material feed. Model HS 280 GZA Year of construction 2012 Technical data: (according to data sheet) Automatic saw design Cutting range 90° Round Diameter 280mm 90° Flat 300 x 230mm 45° Flat 220x230mm 30° Flat 130x170mm Cutting angle 0-30° Saw motor 1,100/1,400 Saw Blade 3000x27x0.9mm Belt speed 1: min 30m/min 2: max. 60m/min Coolant Pump 90W Hydraulic Pump 370W Mains connection 400V / 50-60 Hz Clamping force adjustment infinitely variable 10-40 bar Stroke length 500mm Working height / infeed height 500mm Dimensions (L x W x H) 1700 x 2100 x 1400mm Weight 1100 kg Scope of delivery / standard equipment Completely ready for connection, machine stand with chip collectio ...

1. Dear Ladies and Gentlemen, I refer to your mail to Mr. Schmidt and send you information about the sawmill for sale as requested. I would like to sell the system completely to a buyer and then agree on a package price for the following parts of the system after viewing. The plant is located at the site and is still fully connected. It consists of: 2. 1. Log feeding (cross conveyor, EWD step pusher, block hoist with 2 ejectors) 2. Creel system, Esterer HD 30, with splitting wedge (Arta), outfeed roller conveyor with liftable cross conveyor, and roller conveyors for recutting with lifting cross conveyor to the Costa plant 3. Separation step to the Costa feeding, with infeed roller conveyor to the Costa Mamut cross-cut saw, incl. metal detector 4. Costa Mamut model cross-cut saw, for cutting from 800 to 3000 m, with transfer to Costa double shaft saw "Leone"  ...

I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

For sale is a complete, well-maintained used sawmill plant with EWD sawing line, consisting of modern components for log processing, sorting and disposal. The facility has been regularly serviced and is in excellent condition. Part of the line is still in operation and can be visited by appointment. Available from approx. June 2026. System components at a glance: Log yard: Sorting, surveying and debarking plant, SPRINGER, built in 2017 Nicholson debarking machine, built in 1992 Microtec surveying system, built in 2015 30 sorting boxes Cross-cut plant, built in 2017 Sawing line – EWD: Twin-shaft circular saw DWK 700, built in 1999 Profile chipper PF 19-3SP/V, year of manufacture 2003 Resawing circular saw BNK 225/6, built in 2003 Complete mechanization and control Edger EWD Optimes BK-100B Sawn timber sorting and ancillary facilities: 7 sort ...

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Key data: 4200 mm, 115 mm

Panel Saw with Lift Table Loading Scheer Type: PA 7004 Year of Make: 1999 CE with automatic lift table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, Linux operating system with PA software S5 Cutting length 4200 mm Travel of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade protrusion 135 mm Panel Saw Size FM22 Main saw blade diameter maximum 450 mm Scoring saw blade diameter maximum 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher 30 m/min in the flow, 70 m/min in the return. Remaining section device SP5004 Saw motor 11 kW, scoring 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lift table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front Air Cushion Support Tabl ...

Key data: 6500 mm, 100 mm

Horizontal panel sizing saw Longitudinal saw with 6,500mm cutting length Panel dimension 6,300mm Main saw motor 35KKW frequency-controlled Feed speed saw carriage 5-80m/min. Max. saw blade diameter 550mm with 130mm protrusion Saw blade deviation sensor Cut-gap closers Pressure device 2,600 - 100mm Material tray 6,300mm Extension to 10,900mm 9 Parcel jammers 4 Cross aligners Pressing device 100- 2,600mm, approx. 2,000mm behind the cutting line Pressing device 100- 2,600mm, approx. 4,000mm behind the cutting line Electronic Control PC6200 Machine Tables Air Cushions with Steel Nozzles 1 angle table 2,600x1,000mm with angle stop rail 4 side table 2.600x800mm More information on request!

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

M.Nr. AE/030883 Year of Make: 2007 Motor data: 380 V - 50 Hz - 38 A Type: SEZ. MON. E Cutting dimensions: 3200 mm x 3200 mm Scoring Weight approx.: 2400 kg Equipment: 1 x Front fixed table with guide 1500×600 mm, air cushion 2 x Front fixed table 1500×400 mm, air cushion Automatic switching off of the scoring saw blade Main saw blade motor 7.5 kW (10 hp) Star-delta start-up for main saw blade motor Groove design with manual adjustment of the main saw blade 3D simulator on the machine Graphical editor Cutty – Cut Optimization Software PC Machine feet / pedestals Electrical equipment A.E.V400/50 "N" with microswitch, scoring cut-off, 0YD, grooves

Part Number: 7807 SPECIFICATIONS - track width 350mm - cutting width 350mm - blade diameter from 355 to 505mm - cutting height 10-170mm - spindle diameter 80mm - table top dimensions 1900x790mm - height from the base to the tabletop 830mm -in advance - 2 rows of ratchets/fluffers - 2 Slip Rollers, Smooth, Metal - shaft with saws - 2 sliding rollers, pressure – from below - guide strip - Ratchets/Fluffers -caterpillar - Electric body height adjustment - central lubrication - Infinitely variable speed control on the inverter - 4kW feed motor - main motor 75kW - Diameter of the extraction port 2x150mm - overall dimensions l/w/h 2050x1800x1800mm - weight about 3500kg ADVANTAGES – German production – DTR documentation – used multi-saw – very good condition Net price: 58900 PLN Net price: 14024 EUR depending on the price 4.20 EUR  ...

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws

Part Number: 7805 SPECIFICATIONS - track width 340mm - shaft width 340mm - blade hole diameter 80mm - 350mm discs on the upper shaft - mounted discs on the lower shaft 300mm - max cutting height 200mm - min length of the processed material 700mm –in advance - 2 rows of flingers - smooth, slippery, pressure shaft - Flingers - 2 slip shafts, smooth, pressure shafts - shaft with saws - 3 pressure rollers, smooth – from below -caterpillar - shaft with saws -caterpillar - infinitely variable feed speed regulation - main motors 2x approx. 55kW - 3kW feed motor - Electric body up/down lifting - manual adjustment of shafts with saws - central lubrication - Extraction port diameter 2x200mm - dimensions l/w/h 2700x1800x2150mm - weight about 5000kg ADVANTAGES – German production – twin-shaft – 2x55kW motor – used multi-saw, very goo ...

Part Number: 7804 SPECIFICATIONS - track width 350mm - shaft width 330mm - 300mm disc fitted - max blade diameter 400mm - blade bore diameter 70mm - max cutting height at the blade 400mm, 150mm - table top dimensions: 2240x770mm –in advance - Flers/ratchets - Slide shaft - Flingers - smooth, sliding roller - shaft with saws - 2 sliding rollers, pressure shafts – from below - roller in front of the countertop -Guide -Triggers -caterpillar - central track lubrication - electric shaft lifting with 0.75kW saws - electric body lifting 0.75kW - infinitely variable feed speed regulation - Diameter of the extraction port 320mm - main motor 45kW - overall dimensions l/w/h 2280x1820x2040mm - weight 2850kg ADVANTAGES – Czech production – used multi-saw – DTR documentation – very good condition Net price: 62900 PLN Net price: 149 ...

Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.

Part Number: 7806 SPECIFICATIONS - track width 300mm - Shaft width 200mm - max cutting height 100mm - max blade diameter 300mm - blade hole diameter 60mm –in advance - 2 rows of ratchets/fluffers - smooth pressure shaft, sliding - shaft with saws - smooth pressure shaft, sliding – from below -Guide -Triggers -caterpillar - 2 types of feed speed + smooth - main motor 22.37kW - central lubrication - table top dimensions l/width 1430x700mm - Diameter of the extraction port 150mm - dimensions l/w/h 2100x1450x1400mm - weight 1311kg ADVANTAGES – Italian production – very good condition – used multi-saw Net price: 29900 PLN Net price: 7119 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

JRIMAC Circular Saw/Multifunction Saw MULTICUT -NEW- - Precise and clean cut - Cutting direction left – right/ right – left - Flexible and rational working - Air cushion table for pleasant processing of sheet goods - 90° – Stop ruler for cross-cut cuts - Collets for optimal processing of sheet material - Force-guided pneumatic hold-down device with zero-cutting device - Various options for incision initiation - Convenient, fully automatic saw blade height adjustment - Stepless adjustment of the width stop - Electronic positioning control - Saw blade – quick clamping system "JRIMAC" - High level of occupational safety -Friendly - Cutting accuracy +/- 0.5 mm

The Sulak PTS325F is a powerful vertical saw designed for cutting laminated glass and other specialty glass types. Here are the key specifications and features: Technical Specifications Maximum glass thickness : up to 60 mm Cutting types : o Normal glass o Laminated glass o Fire-resistant glass o Bulletproof glass o Cutting angle : o Straight cut (90°) o Fixed angle of 45° via simple mechanical switching o Cutting direction : Vertical from top to bottom o Cutting speed : Adjustable via frequency converter ( 0.1 – 1.6 m/min ) o Cooling system : Closed circuit with tank, water pump, nozzles and collection system Dimensions : approx. 3650 × 1900 × 4600 mm o Power supply : 3×400 V (or 3×230 V), 50/60 Hz o Power : 3.3 kW o Weight : approx. 1110 kg o Noise level : 78 dB o Saw blade diameter : 350 mm or 400 mm Maximum cutting lengt ...

SPECIFICATIONS: Workspace: Horizontal cutting length mm: 6000 Vertical cutting height mm: 2200 Workpiece height mm: 78 Saw blade diameter mm: 300

CML 2-blade mobile multi-blade rip saw model SCA320 2R T350 , with separation line and return of pieces to the operator: – machine management from a separate control panel, with: CNI electronic programmer 2 joysticks for managing the 2 units with moving blade Variable feed speed (inverter), with digital display motorized positioning of the blade unit, with digital display Motorized positioning of the presser, with digital display Motorized positioning of the machine infeed guide – 1 fixed blade + 2 mobile recirculating blades – 1 fixed laser + 2 mobile lasers, for cutting lines – 350mm belt, 320mm useful cutting width – blade diameter from 220 to 350/360mm max – useful cutting height with 360mm mobile blades: 100mm – useful cutting height with 350mm movable blades: 95mm – useful cutting height with fixed sleeve and 350mm blades: 120mm – blade moto ...

Key data: 800 mm

Under-table cross-cut saw / optimization cross-cut saw Paul Type 20 E / NC Control Maxi 0.3 Machine No. 9159582 Year of construction 10.7.92 NC control Maxi 0.3/X.3 for length and quantity input, Cutting width max. approx. 700 mm Cutting height max. approx. 150 mm Saw blade diameter 800 mm Saw motor 7.5 kW Feed motor 4 kW Hydraulic pump motor 2.2 kW Speed of the saw blade 1450 rpm. Infinitely adjustable feed of the saw blade up to 0.2 m/sec. Cutting time depending on cross-section (adjustable) 0.5 – 3 sec. Driven rollers 2 at the top and 2 at the bottom Roller diameter 106.1 mm top and bottom Adjustable roller pressure Transport speed infinitely variable from 0 – 2.3 m/sec. Shortest input length with manual feeding approx. 500 mm Shortest input length with automatic feeding approx. 1500 mm Length accuracy +- 2 mm Measurement via measuring roller in the table P ...