cold circular saw used for sale

Key data: 90 °, 3000 mm

SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°

Key data: 315 mm, 85 mm

Metal and non-ferrous circular saw MÖSSNER MK/14 Speed: from 80 to 3000 RPM Table size: 900 x 700 mm Max saw blade diameter: Ø 315 mm Maxi cutting height: 85 mm Motor: 2 speed Ideal for sawing aluminum plates, bronze etc. Voltage: 380 V Length: 1100 mm Depth: 900 mm Total height: 1300 mm Weight: approx 500 kg

Sawblade tiltable: 0-45 ° Length of the rolling table: 3350 mm cutting width: 1100 mm Motor output: 5,5 kW Cutting height: 155 mm Cutting height at 45°: 110 mm Saw blade diameter: 450 mm Speed: 3000 | 3600 | 4200 U/min. weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

H.I.T. NSM 250 RESAWING SAW WITH WOOD FEED FROM THE LEFT (LEFT-HAND MACHINE). The system was fully functional until it was professionally dismantled and dismantled. In addition to the resawing saw with side fabric capping, a model turner, an alignment and centering table and a splitter separation transport included. Specifications Cutting height: 40 - 240 mm Cutting width: 18 - 400 mm / 5-leg variable Width unedged: 750 mm Lengths: 2.50 - 14.00 m Feed: max. 60 m/min Swivel circular saws for side goods cutting with 2 x 7.5 KW motors Saw drive with 2 x 132 KW motors Errors in the information excepted.

Length of the rolling table: ca. 2280 mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1550 mm with mitre rail incl. side stop extension to 1000 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.

Length of the rolling table: ca. mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1460 mm with stop extension to 2840 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm cutting diameter: 70 mm tiltable up to: 45 Grad dimensions of the machine ca.: 3.5 x 0.6 x 1.8 m weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OZGENC MAKINA SL 500C automatic circular sawing machine was built in 2019 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The first launch took place in 2020 and the machine was in operation for about two years since then. The SL 500C circular sawing machine is designed for cutting aluminium profiles at an angle of 90°. It offers unprecedented efficiency and cutting precision thanks to the use of a high-quality, 500 mm diameter diamond saw, whose feed is adjusted by reliable servomotors. What’s more, the touchscreen operator panel with PLC controller significantly simplifies the operation of the machine by providing the user with the necessary information and the ability to quickly program work cycles. The OZGENC MAKINA aluminium sawing machine weighs 310 kg. Technical specifications of the OZGENC MAKINA SL 500C aluminium circular sawing machine - cutting angle: 90 ...

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 40 mm Cutting speed: 10 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7 kW Weight approx.: 700 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP NC total power requirement: 1.5 / 2.2 kW weight of the machine ca.: 290 kg range L-W-H: 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allows ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The  ...

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 x 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 / 110 mm capacity 45 degrees: square: 100x100 / 95x95 mm capacity 45 degrees: flat: 135 x 60 mm turning speeds: 1700 / 3400 U/min Control: MEP CNC total power requirement: 2.6 / 3.5 kW weight of the machine ca.: 605 kg range L-W-H: 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw For cuts from 45° right to 45° left In aluminum and light metal alloys - MEP microprocessor control Simple user interface with display and mechanical buttons Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp Pneumatic clamping system allow ...

Various accessories for saws in professional woodworking are offered - consisting of replacement profile cutter heads (partly from Leitz-Variform, as good as new and partly in original packaging). If requested, individual sales may also be possible. The accessories are currently located in Magdeburg and are being sold - due to a restructuring. Only the accessories offered are expressly sold, any items shown in the photos are expressly not part of the scope of the offer. The offer prices are to be understood as gross prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, to which we expressly refer.

Fields K7 Sliding table saw Motor power: 400V 7 KW, 50HZ Format sliding table: 2.3 m Cutting height: 103mm Saw blade: swivel, max. 315mm WJ-400105 Boom Table with Telescopic Stop Folding Stops Upper protective hood Year of manufacture 1997

gebr. Types - Circular saw, Fabr. Gema, Type HGB Accessories: Vise

The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power  ...

Key data: 300 mm

Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg

Key data: 400 mm

Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades

Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m

formatkreissägen mit schwenkbarem sägeblatt SICAR 350 Neue Maschine Bereit zur Auslieferung SUPER RABATTPREISE mit Vorritzaggregat : Ja digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz CE-Vorschriften: JA mit Bedienungsanleitung und CE-Erklärung Volt. 380/50 Auf-/Ab- und 45°-Neigung der Sägeblätter manuell digitaler Neigungswinkelmesser 0° / 45° Brückenblattschutz schlitten mm. 3200 unabhängige Motoren hauptmotorleistung PS 7.5 motorleistung Vorritzaggregat PS 1 max. Sägeblattdurchmesser mm. 350 durchmesser Vorritzaggregat mm.120 Max. Schnitthöhe bei 45° mm. 92 Max. Schnitthöhe bei 90° mm. 120 Max. Schnittbreite an Parallelführung mm.1250 volt. 380/50

Sawblade tiltable: 0 - 45 ° Length of the rolling table: 3.200/3350 mm cutting width: 1.100 mm Motor output: 5,5 kW Cutting height: 155 mm Cutting height at 45°: 110 mm Saw blade diameter: 450 mm Speed: 3.000/3.600/4.200 U/min. Dust suction hood: 1x120 , 1x80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6800x3350x1500 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x2800x1100 mm Weight: 330 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1450x2700x1450 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2540x2900x850 mm Weight: 1200 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1860x2700x1450 mm Weight: 350 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6700x3350x1500 mm Weight: 1000 kg Total power requirement: 7 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x2800x1100 mm Weight: 310 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: ° cutting width: mm Motor output: kW Cutting height: mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

Key data: 400 mm, 2200 mm

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm 2 saw motors Motor power 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2500 mm 2 front stop rails 1 piece length 1200 mm, 1 piece length 2400 mm With extraction connection and pipe Including 10 saw blades with a diameter of 400 mm Weight approx. 1300 kg Shipping Dimensions 3900 mm x 1300 mm x H 1200 mm

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...

Sliding table saw Felder K700, built in 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm format table length, approx. 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Circular saw Felder K7, very good condition, 3000 mm table length, 600 kgPrices subject to change, errors, printing and typesetting errors excepted

The new Pilous DB700Pro double edger is aimed at professional users who demand maximum efficiency and capacity. This model offers more powerful units, optimized stability, and expanded adjustment options to process even the most demanding materials with maximum accuracy. With its powerful drives, high cutting performance, and durable components, the CTR-DB700PRO is the perfect solution for businesses that value speed, precision, and cost-effectiveness. ... Advantages and Features: - Reinforced drive technology for maximum performance - Extremely stable machine base - Fast, precise adjustments for professional applications - Significantly increased wood throughput capacity - Very high cutting height of 105 mm - High level of safety thanks to 4 rows of anti-kickback technology and multiple emergency stop switches - Perfect material feed thanks to 4 driven steel feed rollers at the bottom a ...

Holzprofi Maker PS315F-2000 sliding table saw with smooth sliding carriage and large outrigger table, pivoting circular saw blade, and finely adjustable crosscut stop. Space-saving thanks to the easily removable outrigger table. Scoring tool, miter stop, and eccentric clamp included as standard. New: Preparation for grooving cutter. Technical data: Main engine power S1 3,8 kW Voltage 400 V Saw blade tilting 45° Sliding table 2000 x 267mm Cutting length 2300 mm Saw blade size 315 mm Bo. 30 mm Scoring blade 100 mm Bo. 20 mm Cutting depth 90°/45° 100 mm / 80 mm Speed saw blade 4500 RPM Speed scoring saw blade 8500 RPM Extraction connection 100 mm Groove cutter thickness (optional) 6-22.5 mm Groove cutter bore (optional) 30 mm Weight 284 kg Optional equipment: with 2600mm format table, Driving device FE-MW-1

Holzprofi panel saw KS400 incl. scoring unit, smooth running format sliding table with large outrigger table, saw blade tiltable, fine adjustable parallel rip fence incl. mitre fence and eccentric clamps. Very stable guidance of the format table for precise working even with heavy work pieces. With own motor for the scoring unit for an easy deactivation. Technical data: Main motor outputS1 5,5 kW Scoring motor output S1 0,75 kW Voltage 400 V Saw blade tilting 0-45° Format table size 3200 x 375 mm Blade dimensions 400 mm Cutting depth 130 mm Scoring saw blade 120/20 mm Speed saw blade 3000/4000/5000 RPM Speed scoring saw blade 8000 RPM Cutting width 1250 mm Weight 1000 kg

Sliding table saw Laguna Fusion, good condition, 1450 watts, 1118 mm table length, 792 mm table width, 79 mm cutting height, 3800 rpm, 110 kgPrices subject to change, errors, printing and typesetting errors excepted