130,804 used machines on RESALE, but how to find them? Machine Search
The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc ...
Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile
Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit
SPECIFICATIONS: Machining width: max. 1300 mm Processing thickness: max. 80 mm Installed power: 9 kW 01 Low Pressure Pump 04 Painting units COMPOSITION: AGGREGATE I Dosing Unit Steel roller Speed adjustable via the CN control Power: 0.75 KW Speed: 1400 rpm AGGREGATE II Applicator Roller: Ø 250 mm rubber Power: 0.75 kW Speed: 1400 rpm AGGREGAT III Filler Steel roller Power: 0.75 KW Speed: 1400 rpm AGGREGAT IV Dosing Unit Steel roller Power: 0.75 kW Speed: 1400 rpm Control: SORBINI
UV-Beschichtungsmaschine - UV-Coating machine Billhöfer Gula Speed CGS JKN 112 Year 1988 - Serial-No. 1743 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112 Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wire: C < 1,0 %. Diameter 1,00mm . - 2,00mm Strengths < 1400 N/mm² Coating speed design: Wire diameter: 1,00mm -1,50 mm Maximum coating speed: 120 m/min Wire diameter: > 1,50mm - 2,00mm Maximum c ...
2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative ...
For sale is a Wagner WAC 70 circular saw in excellent condition, including a bundle loader. This high-quality machine is ideal for precise cutting and efficient handling of wood and workpieces in wood processing. Type: Circular saw Model: Wagner WAC 70 Additional equipment: Bundle loader Features of the Wagner WAC 70: Precision: The WAC 70 offers precise cuts for a wide range of wood types and formats. Performance: Robust construction for a long service life and high performance. Efficiency: The integrated bundle loader enables fast and efficient material feed, which significantly speeds up the production process. Operating Voltage: - Main: 400V, 50Hz - Control Voltage without transformer: 230V - Control Voltage with transformer: 25V Rated Current: 23A
Used Skerman (France) stainless steel coating pan. Total volume 500 Liters. Batch load aproximately 200-250 kg. Pan depth 10450 mm, Pan diameter 1200 mm. Unit with drive ready to work. Overall dimentions 1900 mm, 1250 mm, 2100 mm.
- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images
Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018
Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015
Manufacturer: Bürkle Leimauftragsmaschne 800 mm, Type: DAH, Control: no, 4 roller machine: 4, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3-120, Working widht max mm: 800, Working hight mm: 890, Diameter of roller coater mm: 240, Supply roller diameter mm: 180, Roller cleaning system: no, Main engine kW: ca.5,5, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: möglich über Umrichter, Through running machine: yes, FREE TEXT: Maschine muss überholt werden,
Manufacturer: Hymmen , Type: TLA, Year: ca.1990, 4 roller machine: yes, Work piece width min-max mm: 30-1300, Min.-max. workpiece length in mm: 350, Min.-max. workpiece height in mm: 3-120, Diameter of roller coater mm: ca.230, Year :ca.1990
Manufacturer: Bürkle, Type: DAK, Working widht max mm: 1420, Diameter of roller coater mm: 238,
Used copper coating pan manufactured by Spomasz Pleszew with a tilting drum. Capacity: 100 liters, input: about 60 kg. After general renovation.
Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006
Frisch Spritzmatic Smartline Coating System Spraying System - Manufacturer: Frisch Vertriebs GmbH - Type: Smartline conveyor system - Egg spraying system - Compact conveyor system - Voltage: 230 volts - Power: 0.25 kW - Operating pressure: 8 bar - Year of construction 2010
Used, copper coating pan made by Spomasz Pleszew, model: CBA-2. Capacity: 100 liters, load: approx. 60 kg.
Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.
Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Koppens 900mm Preduster 900mm belt width With blower Stainless steel, on wheels
Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Koppens Batter Enrober Model TD600 Tempura /hold down enrober With upgraded control panel and mesh belt
Professional powder coating plant in excellent condition, available as of today. Picture 1: Blast cabinet • Year of construction: 2010 • 4x11 kW turbine • Maximum diameter 1.7 m • Maximum height 2.85 m • The blasting booth removes sharp edges and dirty oil layers from the raw material. In addition, blasting roughens the surface of the part so that the paint adheres better. Picture 2 + 3: Gema quick-change powder booth opticenter • Year of manufacture: 2013 • 10x automatic powder spray gun • 1x hand gun • 2x hydraulic work platform • It is possible to spray large surfaces partly by machine and small, more difficult areas partly by hand. Lost powder is extracted at the bottom, collected, and reused. Picture 4: Powder coating oven • Furnace dimensions: 20 meters long x 5.5 meters wide • Transport chain in oven: 45 meters long (Z ...
Koppens Breading Machine Model: PR600C 600mm belt width very good condition
A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.
A complete WMV coating system for the surface treatment of bulk materials is available. Charging capacity: approx. 1000kg-2000kg, charging weight per partial batch: 170kg, tray dimensions X/Y/Z: 1200mm/800mm/140mm, control: Siemens S7. Components: Loading and unloading, loading system, charging system, desoldering system, crate washing system, rinsing system, drying system and washing system. One cooling system and one immersion bath are defective. The drying system was extended in 2008 for bulk solids. Documentation available. On-site inspection is possible.
A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...
Complete professional powder coating plant in excellent condition, available from today. 00000 00000 00000 Turnkey delivery, we take care of all the work Control units from Gema We will respond to your inquiry immediately with all the details. Smooth processing, since 2010 With plastic booths, powder center, pump delivery, automatic guns, visual controls from Siemens Simatec 3D scanners, according to the latest technology... and of course pre-treatment with nano-coating Drive only e.g. 2 hours and look at a reference plant, one of many in the DACH region (since 2010) Contact us now, it's worth asking See PDF for all details powceq com (project page) , see also video here
For the automatic powder plant, conveys powder coating up to 20m in an even and 8kg quantity PDF with all details available, see also powceq com
Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - / Contact us at -
Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately
Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately
Lackierkabine Premium L7000 Innenmaße (mm) ▪ Länge: 7000 ▪ Breite: 4000 ▪ Höhe: 3700 Außenmaße (mm) ▪ Länge: 7200 ▪ Breite: 4100 ▪ Höhe: 3700 ▪ Struktur: 2 seitliche Kanäle Absaugung 5 Absauggitter am Boden für eine optimale Absaugung Beleuchtung 4 LED-Neonröhren – Leistungsstarke und gleichmäßige Beleuchtung ⚙ „Easy Start”-System Vereinfachte Inbetriebnahme – schnell betriebsbereit
Complete line for coating dragees
Professional Grade Powder Device with Vibration Table Analog control, like new and 12 filters for powder booth in high industrial quality (extra price) Measuring instrument, unused, with full warranty, fully assembled Pick-up requested near Freiburg (D), shipping 150 Eur Scope of delivery Injector up to 300gr/min Control Unit Pro Analog Powder spray gun C2 (without remote control buttons) All cables and hoses Trolley and Vibrating Table Description Universal, processes almost all powder coatings and part structures Powder Coating Equipment 510 gram hand pistpole, flat spray nozzle Most important components from Switzerland Efficient and precise User-friendly rotary switch Car. Regulation of the charging voltage (mA) Fair prices on wear parts
POWDER ENAMEL COATING EQUIPMENT HIGH ENAMELING COVERAGE MANUAL OR AUTOMATIC MADE IN TÜRKİYE COST EFFECTIVE, GOOD QUALITY AND LONG LIFE TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Protection class : IP 54 Operating temperature :-20-50 ° C Nozzle : Ø16-20-24mm deflectör + Nozzle
IMA COATING MACHINE, MODEL GS RA 300 Year of construction: 2011 Coating machine for the processing of tablets and other products with a solid wall pan to process all product shapes. With technical documents. MACHINE CHARACTERISTICS • Pan diameter: 1,580 mm (ca) • Pan mouth diameter: 520 mm (ca) • Control panel: Siemens MP277 10'' Touch PRODUCTION CHARACTERISTICS • Capacity: 150 l (min)/300 l (max) (ca) ENERGY CONSUMPTION • Electricity: 3 kW (ca)
The system has been upgraded several times by Cemecon, the last time in 09/23 to the latest software Pure research facility, only about 5500 processes run. Last service: 2023 by Cemecon. 4 cathodes 5 gases, 1 of which is flammable Anodes all 4 cathodes DC or MF pulsed BIAS: DC or MF pulsed 1x Heater
The plant has 2 application units for solvent-based coating or lamination. 4 drying tunnels web width max. 1060 mm, Speed max. 180 m/min, Diameter Ab rewinder = 1000 mm, Accessories : Microperforation, Pretreatment
Coating line BTI- E- 400/10000 Chocolate coating line consist of - Completely in V2A - Engine manufacturer: SEW Eurodrive - Control: Omron/Schneider -Blower - Scheierkasten - Internal heating - Interior heating steel - Inlet belt approx. 1 meter - Base and full cover possible - Floor pan with thermo sensor - Floor pan double-walled hot water heated - In bottom pan Motion agitator - Floor pan can be manually extended for cleaning - Chocolate pump, pump head in V2A - Double-walled pipes, hot water heated - Detail wave OPTION: For real chocolate ( with cocoa butter ) Version with external temperature control machine for an extra charge Cooling Tunnel Model: BTI 400/6000 - Width of the conveyor belt in the cooling tunnel: 400 mm - Width of mesh tape in the enrober: 375mm - Speed of conveyor belt: 0 - 7 m/min - (Speed is adjustable) - Cooling compressor power: 3 HP ...
1 SUCHY laminating machine type Laminator, year 2015 (machine has less than 1000 working hours), roller width 220 cm, working width 200 cm, consisting of: - Unwinder for fleece, - Unwinder for scrim (fabric web), - Unwinder for oil paper, - All 3 unwinders use 3" (76 mm) cardboard cores with pneumatic expanding shafts, - Heated roller with water heating (90 °C) and REGLOPLAS temperature control unit, - Cooling roller, - Pressure roller, - 3 longitudinal cutting devices with quadruple knives (200 mm diameter), - Cross-cutting unit with circular quadruple knife (110 mm diameter), - Rewinder for 3" (76 mm) cardboard cores, up to 1000 mm diameter, Speed: 0–10 m/min
FROGERAIS dragee coating turbine, Engine: Type B F 80 b: 0.96 kW, Turbine diameter (mm): 900, Turbine depth (mm): 630, Dimensions (mm): 1530x1250 H2600
Provisur Coater TST Coating machine Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock
Manufacturer: ASYMTEK Model: SL940E Year of Manufacture: 2010 Type: Painting / Coating System Applicator: SC280 Operating System: Microsoft Windows 7 Professional, Version 6.1.7601 Service Pack 1 Build 7601 Software: ECW 5.0.0.538 Capabilities: Material circuits can be pre-heated (paint heating) Included Equipment: Drying Oven: ViTechnology TC 3600 Drying Oven Year of Manufacture : 2006 Find more here - / Contact us at -
A mobile cheese brining machine Sugnaux is available. Throughput: approx. 120-150 loaves/h, cheese diameter range: 100mm-200mm. Machine dimensions X/Y/Z: approx. 850mm/1000mm/1350mm, weight: approx. 250kg. The machine was recently overhauled with new couplings, control cables, wheels and frequency converter. Including vacuum cheese holder, second brush set and some spare parts. Documentation vorhanden. A visit on site is possible.
maximum number of results exceeded
please refine your search
