coating line used for sale

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

The curing furnace consists of a tunnel furnace in which the workpieces are baked after coating. The furnace is a straight tunnel furnace. The frame is made of steel with insulated panels. The mineral wool insulation becomes 150 mm thick in a special construction to prevent thermal bridges 1 Inner dimension length 7,000 mm Inner dimensions width 1,000 mm Inner dimensions height 2,500 mm 2 Outer dimensions incl. thermoblock, length 7,200 mm Outer dimensions incl. thermoblock, width 1,300/2,300 mm External dimensions incl. thermoblock, height 2,800 mm 3 substructure 1 set of steel profiles 80 x 80 and 40 x 80 mm 4 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5010 5 Insulation 1 set of rock wool 150mm 75 Kg/m³ 6 Ventilation system 1 set of galvanized steel sheet 7 Temperature max. 220°C 8 fans 1 pc. 7,500 m³/h 9 electric motors 1 pc  ...

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Extraction capacity: Q = 18000 m³ P = 15 kW The cab has 2 doors on one side for the insertion/outlet of the workpieces. The components are pushed into the cabin for coating via the overhead transport system. Walls, ceiling and doors are made of panels. The filters positioned on the roof absorb dust and other particles from the outside, thus ensuring clean ambient air in the cabin. The overspray during powdering in the cabin is absorbed by the extraction unit

SPECIFICATIONS: Machining width: max. 1300 mm Processing thickness: max. 80 mm Installed power: 9 kW 01 Low Pressure Pump 04 Painting units COMPOSITION: AGGREGATE I Dosing Unit Steel roller Speed adjustable via the CN control Power: 0.75 KW Speed: 1400 rpm AGGREGATE II Applicator Roller: Ø 250 mm rubber Power: 0.75 kW Speed: 1400 rpm AGGREGAT III Filler Steel roller Power: 0.75 KW Speed: 1400 rpm AGGREGAT IV Dosing Unit Steel roller Power: 0.75 kW Speed: 1400 rpm Control: SORBINI

UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV-112 Year 1982 - Serial-No. 9035 Format min. 300 x 500mm Format max. 820 x 1120mm Feeder automatic Mabeg Grammatur 60 up to 500 gr/m2 card board UV-Beschichtungsmaschine - UV-Coating machine Billhöfer CPUV- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

For sale is a Wagner WAC 70 circular saw in excellent condition, including a bundle loader. This high-quality machine is ideal for precise cutting and efficient handling of wood and workpieces in wood processing. Type: Circular saw Model: Wagner WAC 70 Additional equipment: Bundle loader Features of the Wagner WAC 70: Precision: The WAC 70 offers precise cuts for a wide range of wood types and formats. Performance: Robust construction for a long service life and high performance. Efficiency: The integrated bundle loader enables fast and efficient material feed, which significantly speeds up the production process. Operating Voltage: - Main: 400V, 50Hz - Control Voltage without transformer: 230V - Control Voltage with transformer: 25V Rated Current: 23A

Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015

Manufacturer: Friz , Type: Profi PWP 120/42, Year: 2006, Control: yes, Suitable for veneer and paper: 2D Folie, Film width mm: 450, Gluing system Pu: PUR, Feeding speed min-max m/min: 6 - 40, Feeding speed continous adjustable: yes, roller diameter mm: 152, Work piece width min-max mm: 10 - 450, Min.-max. workpiece length in mm: min 2500, Min.-max. workpiece height in mm: 6 - 150, Overhauled on: 35 Betriebsstunden, Year :2006

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 51,000 L Dimensions: Ø 3.00 m × 7.80 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Used copper coating pan manufactured by Spomasz Pleszew with a tilting drum. Capacity: 100 liters, input: about 60 kg. After general renovation.

Standing steel tanks with inner coating, standing, with feet can be used as a rainwater tank, for example Volume: 58,000 L Dimensions: Ø 3.00 m × 8.50 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Used, copper coating pan made by Spomasz Pleszew, model: CBA-2. Capacity: 100 liters, load: approx. 60 kg.

The roller drum was used as a coater for spraying granules. The drum is designed in V2A and has a length of 2400 mm with an inner diameter of 890 mm. The base was sandblasted and repainted.

Koppens 900mm Preduster 900mm belt width With blower Stainless steel, on wheels

Koppens Batter Enrober Model TD600 Tempura /hold down enrober With upgraded control panel and mesh belt

Koppens Breading Machine Model: PR600C 600mm belt width very good condition

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...

Complete professional powder coating plant in excellent condition, available from today. 00000 00000 00000 Turnkey delivery, we take care of all the work Control units from Gema We will respond to your inquiry immediately with all the details. Smooth processing, since 2010 With plastic booths, powder center, pump delivery, automatic guns, visual controls from Siemens Simatec 3D scanners, according to the latest technology... and of course pre-treatment with nano-coating Drive only e.g. 2 hours and look at a reference plant, one of many in the DACH region (since 2010) Contact us now, it's worth asking See PDF for all details powceq com (project page) , see also video here

For the automatic powder plant, conveys powder coating up to 20m in an even and 8kg quantity PDF with all details available, see also powceq com

Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

Rail system for workpieces up to (as desired) 4m long and weighing 100kg Complete delivery, since 2010 in the DACH region Next reference page near you see PDF with all the details, see video Powder furnace, extraction stand for coating on both sides, can be upgraded with automatic coating equipment, be it Gema or Wagner Pow C EQ = Powder Coating Equipment We will respond to your inquiry immediately

Complete line for coating dragees

Feeding unit for Dalex welding press

POWDER ENAMEL COATING EQUIPMENT HIGH ENAMELING COVERAGE MANUAL OR AUTOMATIC MADE IN TÜRKİYE COST EFFECTIVE, GOOD QUALITY AND LONG LIFE TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Protection class : IP 54 Operating temperature :-20-50 ° C Nozzle : Ø16-20-24mm deflectör + Nozzle

IMA COATING MACHINE, MODEL GS RA 300 Year of construction: 2011 Coating machine for the processing of tablets and other products with a solid wall pan to process all product shapes. With technical documents. MACHINE CHARACTERISTICS • Pan diameter: 1,580 mm (ca) • Pan mouth diameter: 520 mm (ca) • Control panel: Siemens MP277 10'' Touch PRODUCTION CHARACTERISTICS • Capacity: 150 l (min)/300 l (max) (ca) ENERGY CONSUMPTION • Electricity: 3 kW (ca)

Professional Grade Powder Device with Vibration Table Analog control, like new and 12 filters for powder booth in high industrial quality (extra price) Measuring instrument, unused, with full warranty, fully assembled Pick-up requested near Freiburg (D), shipping 150 Eur Scope of delivery Injector up to 300gr/min Control Unit Pro Analog Powder spray gun C2 (without remote control buttons) All cables and hoses Trolley and Vibrating Table Description Universal, processes almost all powder coatings and part structures Powder Coating Equipment 510 gram hand pistpole, flat spray nozzle Most important components from Switzerland Efficient and precise User-friendly rotary switch Car. Regulation of the charging voltage (mA) Fair prices on wear parts

The plant has 2 application units for solvent-based coating or lamination.  4 drying tunnels  web width max. 1060 mm, Speed max. 180 m/min, Diameter Ab rewinder = 1000 mm, Accessories : Microperforation, Pretreatment 

Coating line BTI- E- 400/10000 Chocolate coating line consist of - Completely in V2A - Engine manufacturer: SEW Eurodrive - Control: Omron/Schneider -Blower - Scheierkasten - Internal heating - Interior heating steel - Inlet belt approx. 1 meter - Base and full cover possible - Floor pan with thermo sensor - Floor pan double-walled hot water heated - In bottom pan Motion agitator - Floor pan can be manually extended for cleaning - Chocolate pump, pump head in V2A - Double-walled pipes, hot water heated - Detail wave OPTION: For real chocolate ( with cocoa butter ) Version with external temperature control machine for an extra charge Cooling Tunnel Model: BTI 400/6000 - Width of the conveyor belt in the cooling tunnel: 400 mm - Width of mesh tape in the enrober: 375mm - Speed of conveyor belt: 0 - 7 m/min - (Speed is adjustable) - Cooling compressor power: 3 HP  ...

1 SUCHY laminating machine type Laminator, year 2015 (machine has less than 1000 working hours), roller width 220 cm, working width 200 cm, consisting of: - Unwinder for fleece, - Unwinder for scrim (fabric web), - Unwinder for oil paper, - All 3 unwinders use 3" (76 mm) cardboard cores with pneumatic expanding shafts, - Heated roller with water heating (90 °C) and REGLOPLAS temperature control unit, - Cooling roller, - Pressure roller, - 3 longitudinal cutting devices with quadruple knives (200 mm diameter), - Cross-cutting unit with circular quadruple knife (110 mm diameter), - Rewinder for 3" (76 mm) cardboard cores, up to 1000 mm diameter, Speed: 0–10 m/min

General SKU396U1161 LocationBarneveld MakeAzo Main Features MaterialStainless steel Volume2000 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity2000Ltr (1000 Ltr. 2x) Diameter1100 mm Conical bottomcheck Flat topcheck With covercheck Manholecheck Outlet with vibro bottomcheck Outlet with valvecheck MaterialStainless steel 1.4301 (304) With jacketcheck General TypeVB 800 B Year of construction1996 Extra Specificationsequipped with a dosing screw. Brand Azo. Type DFS100x 650.Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SilosSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicAZOIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine ch ...

General SKU205M542 MakeApparate- und Behältertechnik Harrislee GmbH TypeTransportbehälter 300L Year of construction1992 Mounted on framecheck Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Silo Silocheck Closedcheck Capacity300 Ltr Diameter800mm Cylindrical height200mm Conical height750mm Outletdia. 150mm Max. temperature130°C. MaterialStainless steel 1.4435 (316L) General LocationBarneveld Mounted on wheelscheck Floorspace1,3x1,1 m Total height1,5 m Weight100 kg Technical specs Extra informationminus 0,95/3 bar working pressurePaints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.SilosSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & ino ...

General SKU120X675 MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsVMA-GetzmannIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Deter ...

General SKU301W572 MakeWab Bachofen TypeKD15 No.740364 Year of construction1973 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt MaterialStainless steel 1.4435 (316L) General Floorspace0,75x1,00 m Total height1,60 m Weight590 kgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Fe ...

General SKU379T1136 MakeDrais LocationBarneveld TypePML-V+H Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck MaterialCeramic, Stainless steel 1.4571 (316Ti) With jacketcheck General No.54 310 Year of construction1992 With switchcheck With switchgear(as is) Floorspace1,2x0,9 m Total height0,7 m Weight340 kg ATEX designedcheck Extra Specificationsthe machine comes with many additional partsPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsDraisIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Starc ...

General SKU305U624 MakeStarick Fördertechnik GmbH TypeLS3 / BAV1200 No.1821.2694.01.05 Year of construction2005 LocationBarneveld Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume3000 Ltr. Pressure1 Bar Specified Features - Silo Silocheck Closedcheck Capacity3 m³ Diameter2000 mm Cylindrical height500 mm Conical height1310 Conical bottomcheck Dished topcheck ManholeDN300 InletDN200 Top connectionsDN600, DN500 Outlet with vibro bottom0,80 kW, 400Volt (EX) OutletDN200 Half coil jacketedcheck MaterialStainless steel 1.4301 (304) With jacketcheck General Total height4,42 m Weightca. 500 kg CEcheck ATEX designedcheck Extra SpecificationsThis silo comes complete with dust filter and rotary valve.Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesDetergen ...

General SKU292W971 MakeDynomill LocationBarneveld CEcheck TypeECM-pilot Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck MaterialStainless steel 1.4301 (304) With jacketcheck General No.050917 Year of construction2005 With switchcheck Floorspace0,68 x 0,74 m Total height0,58 m Weight400 kg ATEX designedcheck Extra Specificationsmounted on table.cap. 10-200 l/h, cooling water consumption 800 l/hPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsDynomillIndustries > Chemical > Paints & coat ...

General SKU319U747 LocationBarneveld Main Features MaterialMild steel/Stainless steel Motor0.15 KW Specified Features - Bag dump station With hoppercheck Capacity± 700 Ltr. Hopper sizes1050x550x2080 mm Inlet500x 920 mm OutletDia. 200 mm With vibro motor0,15kW, 380Volt Bag dump stations MaterialStainless steel 1.4301 (304) General MakeRussel Type17900 Year of constructionunkown Mounted on framecheck With switchgear(as is) Floorspace1,4 x 2,2 m Total height3,4 m Weight1030 kg Extra SpecificationsContainer emptying station equipped with air cylinders to tilt the container.The hopper lid can be opened with an air cylinder.Stainless steel input hopper: 1050x550x2080 mmContainer spot on the platform: 1200x1100 mmPlatform height: 2010 mmPaints & coatingsPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersCata ...

General SKU397W1230 LocationBarneveld MakeCoperion TypeWZK 102 P1 CR Pressure Working pressure shell4 Bar Main Features MaterialAluminium Inlet diameter100 mm Specified Features - Diverter valve MaterialAluminium With jacketcheck General No.109557 Year of construction2005 Floorspace0,80x0,55 m Total height0,35 m Weight100 kg Extra Specifications1x input dia. 100mm, 2x output, dia. 100mmPaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chemicalsIndustries > Foo ...

General SKU397W1229 LocationBarneveld MakeCoperion TypeWZK102-(production area 1)-CR Main Features MaterialAluminium Inlet diameter100 mm Specified Features - Diverter valve Capacity4 bar MaterialAluminium With jacketcheck General No.119741 Year of construction2005 Floorspace0,80x0,55 m Total height0,35 m Weight100 kg Extra Specifications1x input dia. 100mm, 2x output, dia. 100mm,allowable temperature 100°CPaints & coatingsPowdered foodsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersDiverter valvesCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicCoperionIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Chemical > Fine chem ...