co ex used for sale

The machine is equipped with a tailstock, a Multifix tool holder, and a digital readout from the manufacturer ACU-RITE. The machine comes from a training workshop, therefore the lead and feed screw are covered. Additional technical specifications: • Center height over cross slide: 90 mm • Center length: approx. 900 mm • Center height over bed: 170 mm

Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skids own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Corvus Year of manufacture: 2007 (filter housings 2006) Machine type: cartridge filtration system (microfiltration), skid-mounted Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each Housing design rat ...

FILTRATION D’HUILE COMAT 1F14 DQ V1.4 LSX3 CARACTERISTIQUES TECHNIQUES : Fabricant : COMAT Modèle : 1F14 DQ V1.4 LSX3 Année de fabrication : 2011 Type : Installation de superfiltration d’huile de coupe Fluide : Huile de coupe entière Débit nominal : 180 [L/min] Finesse de filtration : 3 à 5 [?m] Surface filtrante : 4,4 [m²] Système de filtration : Filtration avec adjuvant Adjuvant de filtration : Cellulose / minéral Pression d’air comprimé : 6 [bar] Alimentation électrique : 400 [V] Fréquence : 50 [Hz] Tension auxiliaire : 24 [V] AC Puissance maximale : 5 [kW] Poids : 800 [kg] Possibilité d’expédition dans toute la France ainsi qu’à l'international. Plus de photos et détails sur demande. Descriptif technique à titre indicatif, sans engagement de notre part.

Well-preserved plasma cutting machine with 6,000 × 2,000 mm working area, Kjellberg plasma source and Donaldson-Torit DCE extraction system. Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine Type: Plasma Cutting Machine Year of Make: 2016 Working range: 6,000 × 2,000 mm Plasma source: Kjellberg HiFocus 161 neo Cutting range sheet thickness: 1–30 mm Extraction system: Donaldson Torit DCE Condition: Good Maintenance: Serviced annually by MicroStep Availability: Machine is in operation and can be viewed Location: Rottweil The seller can help with loading.

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg LiftMaster Compact 1530 (AL 34) basic unit ⦁ Type 1530: sheet sizes/thicknesses 3048 mm x 1524 mm ⦁ Store interface Loading ⦁ Peeling unit ⦁ Double sheet detection ⦁ Synchronous loader including separation of thin sheet (0.8 - 2.0 mm) Advanced standard configuration ⦁ Extended pallet removal ⦁ Loading station; stack height of 90 mm ⦁ Mild steel rake (prong spacing 67 mm, replaceable prongs) ⦁ Finished part pallet LiftMaster Compact options ⦁ Cleaning brush for slats

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness for rake 25 mm max. sheet thickness for belt prongs 15 mm max. sheet weight 900 kg LiftMaster Compact 1530 (AL 34) basic unit ⦁ Type 1530: sheet sizes/thicknesses 3048 mm x 1524 mm ⦁ Loading station; stack height of 90 mm / 3 t ⦁ Movable unloading rake (prong spacing 67 mm, replaceable prongs) ⦁ Finished part pallet and extended pallet removal station at the machine ⦁ Store interface Loading ⦁ Peeling unit ⦁ Double sheet detection ⦁ Synchronous loader including separation of thin sheet (0.8 - 2.0 mm) LiftMaster Compact options ⦁ Cleaning brush for slats ⦁ Safety devices for connection to storage system incl. 2nd light barrier circuit ⦁ Storag ...

Key data: 1250 mm, 1 t, 250 mm

Used Coiltec Coil Trolley Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out Belt width 1250 mm Coil weight load capacity 1500 kg Colour anthracite Weight 110 kg Dimensions 1550 x 750 x 1000 mm Coil inner diameter (min.) 250 - 515 mm Coil outer diameter (max.) 1100 mm

Hammelmann HDP 164 Pump Pressure: 2,400 bar Flow rate: 35 l/min Engine: Volvo Penta Different accessories available: spare parts, hoses, cables, gun, etc. Machine always maintained and monitored Maintenance invoices available Ready-to-work equipment Conjet 324 Robot – Year 2010 Comes with 2 lengths of extension arms Allows you to adapt to different jobsite configurations Machine always maintained Equipment in very good condition and ready to use

Roda Super Combi 130 – Corrugated-board creasing, cutting and slotting machine Year: 1993 Working width: 1,300 mm Equipment: 6 creasing tools and 6 cutting knives 12 slotting knives, 7 mm, for BC flute 12 slotting knives, 5 mm, for E, B or C flute Waste extraction Reference: PP-44154 Further information on request.

40 POSITIONS GASSING/SINGEING GSP PASSED YARN THROUGH A CONTROLED GAS FLAME TO REMOVE PROTRUDING HAIRS AND SMOOTH THE STRAND

Measuring machine Zeiss Contura BJ 2019

Screw compressor Cebq Daoz Iz Ite Srwshc 45 kW 8.50 bar 8.37 m3/min Year of manufacture: 2018 Hours: 34,881 Problem with the cooling. The temperature rises rapidly. The compressor is running.

CODIMAG VIVA 340 mm Waterless Year 2001 max. width: 330mm 5 offset units waterless 1 hot foilstamping unit 1 varnishing unit 6 IST UV dryers Kocher &, Beck GapMaster Rewinder/ Unwinder Waste rewinder Inline slitter Corona pretreatment BST Web inspection

BASF nyloflex Combi F I Super – Flexo Plate Processing Unit • Year of manufacture: 1997 • Used for research purposes only – in perfect condition • Compact unit including exposure, washer, dryer and light finisher • With temperature control and solids content monitoring • Operating manual included • Max. plate size: 460 × 620 mm • Dimensions (L × W × H): 240 × 120 × 118 cm • Weight: 400 kg • Power requirement: 3.5 kW

Universal Corletts for sale, 27 pcs. Sale only in a package.

1 pc. MT40ZD4-90, # 1179 2 pcs MT40W4-90, #9143, #9145

NUMBER 18 POSITIONS EACH MACHINE HEBERLEIN JET COMPUTER CONTROL

Screw compressor Atlas Copco GA90VSD Inverter integrated 90 kW 13 bar 17.59 m3/min Year of Make: 2014 Operating hours: 32.903h

Key data: 1000 mm, 1 mm

used CoilTec cross-shear, with hold-down and unwinder, mobile, with connection pockets to the Modular workbench, spout height 965 mm Note: Sheet metal infeed only possible from the left! Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey/orange Dimensions::1320 x 1500 mm Coil weight: 250 kg

max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories

Screw compressor Atlas Copco GA26+ 26 kW 8.50 bar 5.02 m3/min Year of Make: 2019 Operating hours: 25.190h

Technical Specifications: - Manufacturer: Costa - Model: SA TS 1350 - Year of manufacture: 2005 - Working width: 1,350 mm - Sanding belt dimensions: 2,620 x 1,380 mm - Sanding heights: 3–160 m - Feed speed: 5–25 m/min. - 1st Unit: - Longitudinal sanding unit - Belt dimensions: 2,620 x 1,380 mm - Electronic sanding shoe, Costa system - roller spacing: 32 mm - Segment width: 32 mm - Drive motor power: 11 kW - Dust removal brush diameter: 180 mm - Operator side: left - Height adjustment: motor -driven - Vacuum conveyor belt - Total power connection: 20 kW / 43 A - Width: 1,924 mm - Length: 2,059 mm - Height: 2,185 – 2,375 mm - Exhaust connections: D 2x100 mm + 2x160 mm - Airflow: 4,830 m³/h at 24 m/s - Compressed air: 6 bar, 880 NL/min. - Volts, Hz: 400 / 50 - Voltage fluctuations: max. ±5% - Weight: 3,100 kg - Location: Blomberg warehouse

- Manufacturer: Hymmen - Type: ULX -S, Combi Coater - Year of manufacture: 2004 - Operating side: left - For single -sided coating application - Oscillating coating roller squeegee Technical data: - Maximum working width: 1.300 mm - Conveyor belt width: 1.270 mm - Workpiece thickness 3 - 120 mm - Working height: 850 -950 mm - Installation length: 940 mm - Width: 2.800 mm - Height: 1.860 mm - Application roller, rubberized EPDM, ~ D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome -plated, D: 174 mm - Counterpressure roller, D: 190 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load: ~ 5 kW - With control cabinet - Weight: ~ 1.400 kg - Location: in warehouse 32825 Blomberg

- Producer Venjakob - Type. VEN SPRAY DUO/C CNC 6000 - year of construction 2005 - Working width 1300 mm - Operating side right - Price for overhauled machine - Actual condition, machine not overhauled - Pistol drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V -belt system - Gun control, touch screen CNC - Installed colour circles 2 pcs. - Quick -change system for spray guns - Supply air filter ceiling - Suitable for water -based paints - Suitable for solvent -based paints - Control cabinet integrated in machine - Total connection ~ 29 - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock - Voltage fluctuations max. +/ - 5 % Picture shows an example of a recondition ...

-with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying -gun drive were replaced. - Manufacturer: Venjakob - Type: HGS -Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V -belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water -based paints - Suitable for solvent -b ...

Weighing station for the food industry, The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/topcontrol/, Type: Weighing scale / weighing station, Indicator: Top Control colour touchscreen, Construction: Stainless steel frame with weighing platform and product tray

Overview SIG Corpoplast BLOMAX 18 Series III rotary stretch blow moulder for PET bottles, built in 2003. Rated output is up to 27,000 bottles per hour on 0.5, 1.0 and 1.5 L bottles and up to 24,300 bottles per hour on 2.0 L. The machine last produced 1.0 L bottles for mineral water and carbonated soft drinks at 27,000 bottles per hour with a PCO 1881 neck finish. It ran in production until August 2026 and is still installed and under power. The preform feeding (box tipper, inclined elevator and unscrambler) and the chiller are part of the sale. Technical data Manufacturer: SIG Corpoplast Model: BLOMAX 18 Series III Year of construction: 2003 Machine type: rotary stretch blow moulder for PET bottles Rated output: max. 27,000 bottles per hour on 0.5 / 1.0 / 1.5 L, max. 24,300 bottles per hour on 2.0 L Last format: 1.0 L bottle, 32 g, 28 mm PCO 1881 neck finish, petaloid base Blow air press ...

The Conrad Combi 500 HD is a crawler-mounted drilling rig designed for reverse circulation, airlift reverse circulation, percussive drilling, and direct-circulation rotary drilling., Includes 28 drill pipes with an outer diameter of 160 mm and an inner pipe of 130 mm 400 cm long., The rig is mounted on a hydraulically driven crawler undercarriage measuring approximately 2.5 m in width, 4.6 m in length, and 0.85 m in height. The tracks are 600 mm wide and fitted with rubber pads. The frame features four independently operated hydraulic outriggers—two at the front and two at the rear—with a stroke of 1,000 mm. A hydraulic turntable allows the machine to rotate 360° in either direction without moving the tracks., Power is provided by an Iveco FPT-C87-ENTZ Tier 4 / Stage IIII Final diesel engine delivering a maximum of 305 kW (415 hp) at 2,100 rpm. Maximum engine torque is 1,800 Nm at 1 ...

Screw compressor Atlas Copco GA26VSD+FF Inverter and dryer integrated 26 kW 12.75 bar 4.90 m3/min Year of Make: 2019 Operating hours: 43.002h

This electric vegetable washer machine is a must-have for any commercial/Industrial kitchen. Made in China, this machine is designed to quickly and efficiently wash vegetables, making it an ideal addition to any restaurant or food service establishment. 1. This machine is a washing machine with ozone. 2. The first washing water can be recycled,with a fresh carbon, 3. The vegetable can be washed in 3 direction, the bubble from bottom, the recycled water from the right, the water from the water pump. 4. There is a barrier to take apart cleaned vegetable from waste. Dimension - 1000x700x1000 mm Voltage - 220V Single-phase Power - 800W Capacity - 200-300 kg/h Tank Dimension - 750x300x510 mm

Fanuc M20iA robot, complete with R30iA controller Year of manufacture: 07/2010 Controller: R30iA Number of axes: 6 Max. payload: 20 kg Max. working range: approx. 1,811 mm Scope of delivery: Robot, controller, cables, teach pendant 4,955 operating hours (servo-on time) 4,341 operating hours (running time)

turning diameter: 186 mm turning length: 350 mm control: FANUC O/T turning speeds: 4.000 U/min spindle bore: 61,0 mm tool holder: 12 Stück chucking diameter: 170 mm operating hours: h total power requirement: 7,5 kW weight of the machine ca.: 2,4 t - FANUC - CNC control - SMB 600 bar feeder with magazine - Chip conveyor - 3-jaw lathe chuck, 170 mm - MK 4 tailstock - Various tool holders - Cooling system - Full enclosure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16600 € : 318.72 € : 1050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1355 mm : 1720 mm : 1630 mm : 1230 mm : 2000 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 € : 380.16 € : 1550 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7,5 kW : 800 mm : 530 mm : 1855 mm : 2220 mm : 1630 mm : 1230 mm : 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 € : 314.88 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Piston Type Semi-Automatic Pot Filler with Time Controlled filling. This can fill from 50grams up to 500 grams per piston stroke ., Condition : Very Good, Available Immediately, Filling Type: Piston Volumetric Pump , Filling Heads: Single, Usage: Yoghurt, Ice cream, Pastes, Fruits, etc., Automation: Air Operated

approx. 11 pieces of compact label dispenser for the application of pre-printed labels, Weber, Alpha Compact – used - : Price per piece from location: now only 950.-€ instead of 2.950.-€ (net)! Manufacturer: Weber Type: Alpha Compact Year of Make: 2014 Incl. column and applicator 100 – 240VAC, Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony

This floor standing unit is designed to help you create fruit coulis and purées, vegetable mousses, sauce bases, bisques and fish soups by separating pips, stones, fibres and carcasses without crushing them. The continuous feed system makes it easy to use and a great time saver., Hopper : Continuous feeding of prepared ingredients for increased productivity., Perforated basket :Your products fall inside the basket where they are strained., End product ejection chute:The ready to use pulp is ejected here and is free of pips, stones, skin, fibres and bones., Waste ejection chute: skins, pips, stones, tails, bones, shells, fibres…, Paddles: Paddle assembly rotating at 1500 rpm to extract maximum pulp and juice., Production of Pulp: 120 kg per hour , Electrics: Single Phase 900 W, Rpm: 1500, Dimensions: 1 030 x 400 x 860, Weight: 45kg , Available: 1 week for Preparation

Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data Manufacturer: Haloila Model: Octopus Compact, inline version Year of manufacture: 2016 Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) Designed output: 3 ...

Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh, Luv, ΔE CIE Lab, ΔE CIE94, ΔL, Δa, Δb, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for ColorDaTra_IPM software version 1.94, inst ...

Mobile lifter for 200L and 300L tote bins., Tilting height adjustable., Model: A, Tilting height: 1750 - 2250 mm, Working load: max 350 kg, Power: 3 x 400V, 50Hz, 0.75kW, Dimensions: 1700 x 1450 x 3150 mm, Weight: 300 kg

BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)

Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulders infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data Manufacturer: Krones Machine type: preform feeding system for a stretch blow moulding machine Operated with: Krones Contiform S24 blow moulder In production until: March 2026 Scope of Delivery Preform buffer silo | Krones | stainless steel hopper with access stairs Preform elevator | Krones | inclined elevator from the silo to the roller sorter Roller sorter | Krones | orients t ...

General SKU200W006 MakeHPV LocationBarneveld TypeRV Base SO Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General No.2002-M-1 Year of construction2013 With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400 ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine  ...

PA 30 ist eine Pneumatische Presse, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Hublänge 35 mm; Ausladung 61 mm. Hauptspezifikationen: Hublänge 35 mm, Tiefenmaß 61 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrmacherei, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)

Used Illig RDM 37/ 10 with top heater, No Sheet Sag Control, Heater moved forward manually, Auto-unwind stand, mechanical indexing, Auto start mechanism, Pneumatic Plug assist, Form Area 475 x 250 mm, Max. Film width 495 mm, Max. Draw 100 mm, Age 1975, basic Machine, in production Condition, Please make an offer !

Beschikbare containers:, Available containers:, , DPX-29037 - 20FT USED 2011 silent container - €12.500,- (photo 1), DPX-29040 - 20FT NEW 2015 silent container - €15.00,- (photo 2), DPX-29046 - 20FT NEW 2015 silent container - €15.000,- (photo 3), DPX-29048 - 40FT HC NEW 2017 silent container - €18.500,- (photo 4), DPX-29049 - 40FT HC NEW 2017 silent container - €18.500,- (photo 5), DPX-29050 - 40FT HC NEW 2023 silent container - €25.000,- (photo 6); Accessories: DPX-29037 - Int. dim.: 5750x2260x2370 mm, (door height 230 & door width 220) Weight: 6.650kg, DPX-29040 - Int. dim.: 5750x2260x2370 mm, (door height 230 & door width 220) Weight: 6.650kg, DPX-29046 - Int. dim.: 5750x2260x2370 mm, (door height 230 & door w