We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,279 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Solenoid valve, Indirect electro-pneumatically actuated poppet valve HERION 8026771 Operating pressure: 2 - 10 bar Connections: 1 ( inch ) Control connection: 1/4 ( inch ) 24 V DC 16 W ( Watt ) New ! Dimensions: 195 x 113 x 90 mm
used
Aluminium pallet with two runners, aluminium pallet PAGUS 1200 x 800 mm load capacity: max. 1000 kg number of longitudinal rungs: 4 rung spacing: 63 mm aluminium profile: 80 x 30 mm own weight: 12.0 kg used, tested ! Dimensions: 1200 x 800 x 150 mm
used
Solenoid valve, directional control valve BUSCHJOST, HERION 8212500.8001 8212500 Installation Length: 135 mm Connecting Female Thread: 11/4 ( inch ) P: 0.5 - 10 bar Solenoid coil: 230 V AC, 16 VA Material ( Housing): Brass New ! Dimensions: 135 x 105 x 145 mm
used
Transnorm belt curve conveyor left 90°-1000-800-IR900 RA2001 Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor Stand width (NB): 1000 mm Belt width (GuB): 800 mm Motor width (MB): +200 mm overall height (BH): 210 mm inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed: Please contact Drive: SEW gear motor with Movi-Mot Electrical data: 50Hz V230/400, kW 0,37 /S1 Year of construction: 1992 Included: Side guide on both sides and frame Optionally available: Suppo ...
used
Transnorm curved belt conveyor left 90°-800-600-IR600 RA1969 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: 0,5m/s Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Just ...
used
Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4750+800 Nominal / outside width in mm: 885 Belt width in mm: 750 Driven: ...
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 732692800 24 V DC coil: 807 476/3 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, Slotted PC Cap, IP 40, Standard Type New ! Dimensions: 80 x 80 x 30 mm
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 732691000 12 V DC Coil: 807 476/2 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, standard version New ! Dimensions: 80 x 80 x 30 mm
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 732691000 12 V DC Coil: 807 476/22 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, standard version New ! Dimensions: 80 x 80 x 30 mm
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732801000 220 V AC 50 Hz coil: 807 478/5 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, drop flap,standard version New ! Dimensions: 80 x 80 x 30 mm
used
Relays, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732801000 220 V AC 50 Hz coil: 807 478/25 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, drop flap,standard version New ! Dimensions: 80 x 80 x 30 mm
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732792000 42 V AC 50 Hz Coil: 807 478/2 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, standard version New ! Dimensions: 80 x 80 x 30 mm
used
drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, full-extension ball guide, roller slide guide -Manufacturer: Hettich, drawer rail roller slide guide type FR 1105/750 -Drawer length: 750 mm -Load capacity: 80 kg -Quantity: 4x set available -Price: per set -Transport dimensions: 750/40/H40 mm -Weight: 3,5 kg/set
used
Transnorm belt conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Co ...
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 771537000 220 V DC coil: 807 477/13 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, Air conditioning / marine version New ! Dimensions: 80 x 80 x 30 mm
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732792000 42 V AC 50 Hz coil: 807 478/22 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, standard version New ! Dimensions: 80 x 80 x 30 mm
used
Relays, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 732692800 24 V DC coil: 807 476/43 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, standard version New ! Dimensions: 80 x 80 x 30 mm
used
capacity / hour ca.: 8000 amount of capping heads: 8 working direction: right-left (CCW) Drive: inverter More then 300 machines new and second hand on our seema .de
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH01 PL - No.: 771537000 220 V DC coil: 807 477/33 IP40 TGL 26047 Features: DC, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, Air conditioning / marine version New ! Dimensions: 80 x 80 x 30 mm
used
Upper bottle, pulley, wire rope clamp, single GEBRÜDER DICKERTMANN BIELEFELD Type 621 Load capacity: 8 t ( 8000 kg ) Rope pulley diameter: Ø 310 mm rope diameter: Ø 20 mm suspension: Suspension eye ( vertebral eye: Ø 48 x 110 mm, swivel and swivel diameter suspension eye: Ø 32 mm Material: steel used, tested ! Dimensions: 880 x 330 x 120 mm
used
Hook Hook Bottle, Crane Bottle, Lower Bottle, Pulley, Wire Rope Clamp, Two CARL STAHL 8000 kg Load capacity: 8 t ( 8000 kg ) rope Roller diameter: Ø 250 mm rope diameter: Ø approx. 25 mm single hook with safety hook opening: 45 mm Material: steel used, tested ! Dimensions: 830 x 270 x 210 mm
used
Aluminium pallet with three runners, aluminium pallet SCHNEIDER LEICHTBAU GmbH 1200 x 800 mm load capacity: max. 1000 kg number of longitudinal rungs: 4 rung spacing: 63 mm aluminium profile: 80 x 30 mm tare weight: 15.0 kg used, tested ! Dimensions: 1200 x 800 x 150 mm
used
Tool trolley with drawers and tool set HBM MACHINES GREYLINE article number: 9404 width ( without handle ): 800 mm depth: 460 mm height: 820 mm ( without castors ) Material: sheet steel 6 drawers: width: 540 mm, depth: 400 mm, height: 70 mm drawers with 245-piece tool set 1 drawer: width: 540 mm, depth: 400 mm, height: 200 mm drawer is damaged ! left side with perforated wall, right side with storage compartment with door further damage to the handle and the upper shelf 2x swivel castors with parking brake, 2x fixed castors used, tested ! Tool set as good as new ! Dimensions: 880 x 500 x 970 mm
used
Relay, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732807000 220 V AC 50 Hz coil: 807 478/25 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, Indicator Working Current, Standard Version New ! Dimensions: 80 x 80 x 30 mm
used
Relays, neutral relay with unprotected contacts ELEKTRO-APPARATE-WERKE BERLIN-TREPTOW RELOG 2RH30 PL - No.: 732807000 220 V AC 50 Hz coil: 807 478/5 IP40 TGL 26047 Features: AC, 50 Hz, 4 changeovers, single contacts, AgCu, slotted PC cap, IP 40, Indicator Working Current, Standard Version New ! Dimensions: 80 x 80 x 30 mm
used
Mass finishing drum, trowalizing machine A. MENGERINGHAUSEN ISERLOHN 800 SKS 6/S Capacity: approx. 800 l drum: approx. Ø 950 mm ( hexagonal ), length: 1000 mm approx. 28 rpm Filling height: 2500 mm Filling hopper: 1400 x 1250 x 500 mm geared motor: SEW R87 DRN112M4/BE5 86 rpm 4.0 kW 380 - 400 / 660 - 690 V 3AC 50 Hz IP54 V-rim gearbox: Ratio: 0.33 including new replacement drum ! used, tested ! Dimensions: 2570 x 2490 x 2740 mm
used
CEE Compact switching element, STAHL 8092/3 - 001 - 00 1250 VA 500 V AC, 6 A 220 V DC, 0.25 A 1 NC, 1 NO contact explosion-proof ! New ! Dimensions ( compact switching element ): 50 x 40 x 42 mm Dimensions ( packaging ): 85 x 55 x 45 mm
used
Control directional control valve, direct controlled, with electrical feedback and integrated electronics BOSCH 0 811 404 803 ( 0811404803 ) AWRPEH10C4B100L-2X/G24K0/A1M Pmax.: 315 bar Flow rate: 50 - 100 l/min used, tested ! Dimensions: 320 x 70 x 145 mm
used
Micrometer, 2 pcs Feinmesserzeugfabrik Suhl 600 - 800 mm TGL 15046-1 pitch: 0,01 mm 1x range: 600 - 700 mm with protective box, dimensions: 930 x 570 x 55 mm 1x range: 700 - 800 mm with protective box, dimensions: 1035 x 635 x 55 mm used, tested ! Dimensions ( packaging ): 1050 x 650 x 130 mm
used
Micrometer, 2 pcs Feinmesserzeugfabrik Suhl 600 - 800 mm TGL 15046-1 pitch: 0,01 mm 1x range: 600 - 700 mm with protective box, dimensions: 930 x 570 x 55 mm 1x range: 700 - 800 mm with protective box, dimensions: 1035 x 635 x 55 mm used, tested ! Dimensions ( packaging ): 1050 x 650 x 130 mm
used
Micrometer precision measuring tool factory Suhl 700 - 800 mm TGL 15046-1 pitch: 0.01 mm with protective box, dimensions: 1035 x 635 x 55 mm used, tested ! Dimensions ( packaging ): 1050 x 650 x 80 mm
used
Feinzeiger micrometer, without dial gauge Precision measuring tool factory Suhl 800 - 900 mm TGL 15046-1 pitch: 0.01 mm with protective box, dimensions: 1195 x 700 x 57 mm used, tested ! Dimensions (packaging): 1200 x 700 x 80 mm
used
Lathe SUS 63/3500 TOS with fixed steady
used
Limit switch KISSLING 54-808-101 R 170201 1 changeover 250 V AC 6 A New ! dimensions ( limit switch ): 51 x 44 x 20 mm
used
Complete busbar system PLS 800, 3-pole, 3800mm, SV3525.000, Rittal, used Top Special price The current price of a similar product is € _____. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Complete busbar system PLS 800, 3 pol, 3800mm long, Rittal, used-Top consisting of: - 19 bar supports for 3 bars SV 9341.000 Rittal, - 4 x 3 Cu busbars PLS 800 each 695mm lg, SV 3525.000, 300mm² - 1 x 3 Cu busbars PLS 800 each 495mm lg, SV 3524.000, 300mm² - 4 x 3 bar connectors SV 3505.000, Rittal - 1 piece Riline60 base tray, 3800mm long, SV 9341.130 Rittal - 1 piece cover plate for Riline60 base tray, 1880mm long, SV 9340.210 - 2 pieces end cover for Riline60 base tray SV 9341.070, Rittal - 4 x 3 pieces SV 3504.000 ...
used
- Installation according to plan Consists of: 12 tanks, 25 400 litres each - Stainless steel AISI 316L /1.4404 - Cylindrical, standing on feet - Diameter: 3000 mm - Height: 5000 mm - Ground clearance: 700 mm - With mechanical mash discharge - Rectangular mash discharge door in the lower floor - With large sieve cylinder (2000 x 400 mm) to keep the mash cake immersed - Pump-over line, with double manifold - Residual drain ball valve NW50 - Clear drain ball valve NW50 - Round manhole NW 500 - Kosthahn - Level indicator - Water overspray ring - Water collection ring for over-sprinkling water - Catwalk and staircase - Installation, according to plan - The whole tank farm in very good condition
used
Telescopic rail guide, with double extension, 2 pcs CHAMBRELAN 800 mm length (retracted / extended) : 800 / 1945 mm carriage1: 742 x 48 x 12 mm all threads: M10 x 1.5 carriage2: 721 x 28 x 14.5 mm all threads: M8 x 1,25 used, tested ! dimensions ( retracted ): 800 x 100 x 80 mm
used
DEMONSTRATION MACHINE with slight signs of wear and minor paint marks, technically tested and maintained, full warranty Their robust design, powerful motor and versatility are the hallmarks of the Turnado series lathes. For more than 20 years, they have been among the proven bestsellers of our conventional lathes. The V models are also equipped with an extended, infinitely variable speed range. In combination with the position indicator and the integrated constant cutting speed function, they achieve superior surface quality during face turning. - Center height 280 mm - Workpiece length 1428 mm - Circumferential Ø above bed 560 mm - Infinitely variable speed range - Classic design in stable construction = durable - One-piece, heavy-duty cast iron bed for more stability - 3-axis position indicator with various rotation functions - Adjustable longitudinal stops for autom. S ...
used
Butchers block with vice, dimensions: 800 mm x 620 mm x 900 mm.
used
S/s mobile tub, dimensions: 750 mm x 1280 mm x 800 mm.
used
Guide rail FESTOOL FS 800/2
used
Van Oirschot mobile lifter, fork length: 800 mm, capacity: 900 kg, total dimensions: 1300 mm x 1050 mm x 1750 mm.
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Use: machining, Hardness: HRC 58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 120 x 120 mm, weight approx.: 12 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
Description: Material: 20CrMnTi, Usage: Suitable for grinding,milling,precision machining,double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (80x100 mm, h 40 mm) The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 255 x 120 x 120 mm, weight approx.: 10 kg
used
The turntable is used for loading or unloading products, containers, and bottles. It is freestanding and has its own drive system. The rotational speed can be controlled continuously with a frequency converter. Product-contacting parts are made of stainless steel. Turntable diameter: 800mm. It is freestanding and height-adjustable on dome-shaped feet. It also has a side attachment for sliding containers from a pallet onto the turntable, and side guides for sliding containers onto a conveyor belt. The power connection is about 0.35 kW 400V. YouTube Video: https://youtu.be/Tt33_9_65Fg More then 300 machines new and second hand on our seema .de
used
Polin oven, model: WIND 4060/5, number: 805155/AA/1385, year of construction: 1998, 220 V, 3 Ph, 50 Hz, 5 floors, floor dimensions: (5x) 400 mm x 600 mm, total dimensions: 800 mm x 1330 mm x 1800 mm.