cnc lathe machine used for sale

Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC turning diameter over slide: 880 mm turning diameter over bed: 1220 mm tail stock: M80 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm spindle turning speed - stepless: 0 - 1000 U/min spindle motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m complete retrofit in 2020 - CNC Control Fagor 8055 TC - Tool holder turret:SAUTER model 0.5.320.025, vertical axis - Chip Conveyor - 4-jaw chuck Ø1000 mm - 3-jaw chuck Ø500 mm - Steady Ø500 mm - Movable bezel Ø250 mm - Special bar for machining very long interiors - Coolant RETROFITTING IN 2020 • Grinding of carriage guides on the X and Z axes • Preloading of X and Z axis ball screw nuts • New Turcite placed on the X and Z axis carriages • General review and disassembly of the engine and head regula ...

x-travel: 400 mm y-travel: 320 mm z-travel: 450 mm Control: Haidenhain TNC 124 drive of main spindle: 3 kW number of spindle speeds: 63-3150 u/min tool taper: SK 40 stroke of quill vertical: 60 mm feed speeds: 5-2000 mm/min rapid traverse: 2 m/min work table:: 800x320 mm coolant: 20 l/min total power requirement: 5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,2x2,4x1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation.

overhauled: 2025 Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1760mm Axis Z ... 1000mm Plunger Cut... 180x220mm powered tools ... 15 Number of positions in the tool changer ... 15 Axis C ... 360° cooling ... 20bar Main engine power ... 60kW Speed of the clamping table surface ... 2-200 rpm Speed of driven tools ... 8-3300 rpm Motor power of driven tools ... 19.5kW Machine weight ... 27200kg L x W x H ... 5700x7000x5900mm The machine is completely overhauled. More info on request. With one-year warranty.

Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020

Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg

faceplate diameter: 4770 mm swing diameter: 5300 mm turning height: 4130 mm faceplate turning speed range -stepless-: 0,4 - 45 U/min feeds infinitely variable: 0,1 - 4000 mm/min table load: 100 t main drive motor: 80 kW Control: Siemens 840D vertical Stroke: 3200 mm cross travel: 3600 mm ram adjustment: 2000 mm ram swivable +/-: 30 z-travel: 1950 mm total power requirement: - kW weight of the machine ca.: 125 t dimensions of the machine ca.: 15 x 9 x 13 m equipped with: - CNC control Siemens 840D - 2 Rams on Crossbeam - Pickup magazine with 8 tool holder positions - Automatic clamping of the tool holder in the ram - 1x straight boring head - 1x 90° angle head (not in the pickup magazine) - 1x set of jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details.

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible.

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible.

Key data: 7200 mm, 4100 mm, 1250 mm

Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

Key data: 4200 mm, 2300 mm, 1250 mm

Control Siemens ... Sinumerik 840 D Clamping table surface ... 1600x4000mm Axis X ... 4200mm Stand passage... 2100mm Max. table load ... 10 000kg Axis Y ... 2300mm Axis Z ... 1250mm Spindle mount... ISO 50 Spindle speed ... 40-6000 rpm Max. spindle torque ... 1050/1435Nm Rapid traverse ... 10m/min Main engine power ... 30/41kW Total power requirement ... 79kVA Machine weight ... 51000kg L x W x H ... 10480 x 5200 x 6120mm Incl. milling heads - C50 and N75 The machine is in good condition, possible to test under power.

Control Siemens ... Sinumerik 840D Sl Clamping table surface ... Diameter 1200mm Axis X ... 2200mm Stand passage... 2125mm Axis Y ... 2425mm Axis Z ... 1000mm Max.table load ... 6000kg Rapid traverse ... X,Y,Z 15 000m/min Total power requirement ... 110kVA Number of positions in the tool changer ... 100 Max. tool weight ... 15kg IKZ ... 60bar Machine weight ... 50000kg Spindle speed 12000 rpm Spindle mount. HSK 100T Workpiece Probe Renishaw OMP 60 Tool Probe Renishaw TS 27R Rinsing gun Handwheel 3x chip conveyor Documentation The machine is in good condition, possible to test under power.

Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible.

Ø min/max to be rectified: 3 - 300 mm, Dimensions of the grinding wheel: Ø610xØ304.8x508 mm, Dimensions of the regulating wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

Technical data: Manufacturer: Kunzmann Type: WF4 CNC Year of Make: 1999 Control: Heidenhain TNL 410 Travel: X 400 mm Y 320 mm Z 400 mm Working spindle Speed: 0 – 4,000 rpm Work table Dimensions L/W: 650 x 350 mm Tool/movement Tool holder: SK40 Quill stroke: 60 mm Dimensions and weight Dimensions: approx. 2,500 x 1,800 x 2,000 mm Weight: 1,800 kg Condition Condition: Used Functional: Tested and fully functional

High-quality and precise Schaublin 110-CNC lathe. The machine is in very good condition overall and has been used carefully. Note: The spindle amplifier is currently defective and would need to be repaired or replaced. Otherwise, the lathe is full-fledged and well-maintained.

faceplate diameter: 3000 mm swing diameter: 3500 mm turning height: 3200 mm Control: Fanuc type: Series 320i Model A slide adjustment: 1750 mm ram head dimension: 300x300 mm x-axis: 2700 mm Table load: 30000 kg main drive motor: 100 kW Tool changer: 16 chip conveyor: total power requirement: kW weight of the machine ca.: 89 t dimensions of the machine ca.: 8,5x6x8 m No. 1104 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm tool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/min feeds: 0 - 10.000 mm/min quill stroke: 90.0 mm table-size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control: TNC 410 CA spindle: ein ~ 126 Std. engine output: 11.0 kW weight: 1300 kg dimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ...

sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2550 mm workpiece weight: 50 t faceplate speeds from - to: 0,8 - 80 U/min main drive motor: 120 kW cross rail adjustment: 2100 mm Control: Siemens 840D total power requirement: 195 kVA weight of the machine ca.: 65 t overhauled/modernized in 2017: - CNC control Siemens Sinumerik 840 D, - 4-jaw faceplate, - 2 ram supports on the cross beam -- horizontal movement of tool head no. 1: 1400 mm -- vertical movement of tool head no. 1: 1500 mm -- horizontal movement of the tool head No. 2: 1980 mm -- vertical movement of the tool head No. 2: 1350 mm -- Swivel angle of the tool head: -/+ 30°. - Hydrostatic table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCHAUBLIN 140 CNC ist eine CNC-Drehmaschine mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Kapazitäten: Dreh-Ø 300 mm; Spindelloch 51 mm; Stangendurchmesser 24/36 mm; Wege Z 370 mm, X 210 mm; Revolver 1×12 angetr. Werkzeuge. Technische Daten: 3 Achsen; Aufnahme A2-5 (VDI30); 30–6000 1/min (stuf.), stufenlos 50–5000 1/min; Werkzeugleistung 2.2/3.7 kW; C-Achse Aufl. 0.001°; Vorschübe 1–10000 mm/min; Eilgang 10 m/min; Druckluft 6 bar; 380V 50Hz; Masse ~3000 kg; Abm. 2530×1400×1840 mm. Zubehör: Lampe, Kühlmittel 130 l, Fußpedal. Ermöglicht enge Toleranzen; Bereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

STUDER S 40 CNC ist eine CNC Rundschleifmaschine hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Spitzenhöhe 175 mm, Spitzenweite 1000 mm, Werkstückgewicht max. 130 kg; Schleifscheiben Ø400×80 mm (Bohrung 127). Längsschlitten Weg 1050 mm, Querschlitten 275 mm; Werkstückspindel 30–750 t/min (drehbar 90°). B-Achse 15°+205° (Inkremente max. 5°); Schleifscheiben bis 1670/2110 t/min, Umfangsgeschwindigkeit 35 m/s. Werkstückspindelmotor 8 kW, Schleifmot. 1 kW, Gesamtbedarf 30 kVA, Anschluss 3x400 V 50 Hz; Gewicht ~5100 kg, Abmessungen 3750×1200×2300 mm. Zubehör: Innenschleifeinrichtung, 1 Spindel bis 60000 t/min, Beleuchtung, einstellbare Reitstockspitze, elektronisches Handbedienpult. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr

ROLLOMATIC CNC 600 X ist eine CNC Werkzeugschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schleiflänge 150 mm, Durchmesser 0,1–12,7 mm, Scheibe max 150 mm; Spindelaufnahme W20; W/U 600 mm; Verfahrwege Quer 230, Längs 180, Vertikal 150 mm; A -15/+90°, B -130/+45°. Daten: Drehzahl 2.000–7.200 min-¹ (stufenlos), Motor 14,5 kW, Anschluss 3x380 V 50 Hz; Abmessungen 2060×2032×1880 mm; Gewicht ~3500 kg. Erreicht enge Toleranzen; Einsatz: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

ROLLOMATIC CNC 600 X ist eine CNC-Werkzeugschleifmaschine, die Präzision, hohe Genauigkeit und Zuverlässigkeit bei der Schleifbearbeitung von Werkzeugelementen bietet. Bearbeitungsmöglichkeiten: Schleiflänge max. 150 mm; Schleifdurchmesser 0,1–12,7 mm; Schleifscheibendurchmesser max. 150 mm; Spindelkonus W15; W-/U-Achse 600 mm; Quer 230 mm, Längs 180 mm, Vertikal 150 mm; A: -15/+90°, B: -130/+45°. Hauptdaten: Schleifspindel stufenlos 2.000–7.200 t/min; Schleifspindelmotor 14,5 kW; Anschluss 3x 380 V, 50 Hz; Maschinengewicht ca. 3.500 kg; Abmessungen L2060×B2032×H1880 mm. Entwickelt für enge Toleranzen; typische Branchen: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

STUDER S 31 LEAN CNC ist eine CNC Rundschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Spitzenhöhe 175 mm, Spitzenweite 650 mm, Werkstückgewicht bis 80 kg; Schleifscheibe Ø500×63 mm, Bohrung 203 mm, Revolver 2+1. Wege: Längsschlitten 800 mm, Querschlitten 254 mm; Werkstückspindel 1–1000 U/min (drehbar -15/+195°), MK4; Schleifspindelmotor 7,5 kW, Anschluss 3×380 V 50 Hz, Gesamtbedarf 32 kVA; Gewicht ca. 5200 kg, Abmessungen 3000×2200×2100 mm. Ausstattung: Touchtaster MARPOSS, Innenschleifeinrichtung, RS-232. Erreicht enge Toleranzen; Einsatzbereiche: Automobil, Luftfahrt, Werkzeugbau, Medizintechnik. Technische Daten ohne Gewähr

STUDER S 31 CNC ist eine CNC Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenhöhe 175 mm, Spitzenweite 650 mm, max. Schleifdurchmesser 348 mm; Schleifscheibe links Ø500×63 mm, rechts Ø400×63 mm; Revolver-Schleifspindelstock 2 Spindeln; C-Achse Auflösung 0,0001°. Bewegungen und Spindeln: Längsschlitten Z Hub 800 mm, Querschlitten X Hub 254 mm; Schleifscheiben-Drehzahl 1.400–3.200 min-¹; Werkstückspindel 1–1.300 min-¹; Spindelbohrung 26 mm; Reitstock Kegel 3 CM, Pinolenweg 35 mm. Technische Daten: Vorschübe Z 0,001–10.000 mm/min, X 0,001–5.000 mm/min; Anschluss 3×400 V 50 Hz; Werkstückspindelmotor 3 kW; Gesamtleistung 23 kVA; Gewicht ~5.200 kg; Abmessungen 3000×2200×2100 mm. Zubehör: Papierfilteranlage, Kühlmittelfilteranlage, Innenschleifeinrichtung, Beleuchtung, elektronisches Handbedienpult, Schleifsch ...

Manufacturer: SPINNER Model No.: PD-CNC Year: 2006 Condition: Used Stock number: 9421 Control system: SIEMENS Sinumerik Maximum turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Max. rod diameter: 32 mm Spindle speed: 8000 1/min Length: 2300 mm Width: 1200 mm Height: 1700 mm Weight: 2300 kg

Lagun X: 3000 - Y: 1000 - Z: 1200 mm CNC Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1200 mm Dimensions clamping space- table: 3100 x 800 mm Power on spindle: 22 kW Type of millinghead: BT-50 Max speedrange: 50 > 3000 rpm (840 Nm) Control: Heidenhain iTNC 530 Power needed (KVA): 35 kW Length : 8744 mm Depth: 3765 mm Height: 3352 mm Weight: 14 ton

Kunzmann WF 7 CNC Fräsmaschine TNC 410 Steuerung Hersteller: Kunzmann Typ: WF 7 Baujahr: 2001 Zustand: gebraucht, unter Strom Steuerung: Heidenhain TNC 410 X-Weg 610 Y-Weg 400 Z-Weg 400 Aufnhame SK 40 Drehzahl 1-5000U/min Kipp/-Schwenktisch Lieferumfang: ? Unterlagen ? Diverse Werkzeugaufnahmen

met spanentransportband Longitudinal travel X-axe: 1050 mm Crosstravel Y -axe: 560 mm Travel Z-axe (Height): 560 mm Dimensions clamping space - table: 1400 x 550 mm Power on spindle: 9 kW Max speedrange: 10 > 6000 rpm Control: Fanuc O-M ACCESSORIES & TOOLING: toolchanger, 32 positions

Key data: 250 , 400 , 125

STUDER S21 CNC – Universal cylindrical grinding machine – 400 x 125 mm – Integral retrofit The STUDER S21 CNC universal cylindrical grinding machine is offered for sale. High precision machine designed for external, front and internal grinding operations, rebuilt and modernized by MIRA Retrofit, specialists in grinding machine reconstruction and retrofit. Equipped with turret wheel head, configured for: - 2 wheels for external grinding - 1 internal grinding wheel Description: - Manufacturer: STUDER - Model: S21 CNC - Year: 2008 - Distance between centers: 400 mm - Height between centers: 125 mm - CNC Control: GE Fanuc 21i-TB Series - Type: CNC Universal Cylindrical Grinding Machine The machine will be delivered completely rebuilt, adjusted, checked and ready to work. Availability: please consult National and international shipments. For more i ...

Maho MH 1000 S X: 1000 - Y: 560 - Z: 800 mm CNC Max longitudinal travel X-axe: 1000 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 800 mm Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Spindlespeeds: 2000 rpm Table size: 1250 x 800 mm Control: Philips 432 Length: 4600 mm Depth : 2500 mm Height: 2300 mm Weight: 7,5 ton Toolholder: yes

Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions