cnc gantry type used for sale

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MONFORTS CONTROL SYSTEM MTC Technical data Centre height: 250 mm Distance between centres: 1500 mm Swing over cross-slide: 290 mm Swing over bed: 500 mm Taper in spindle: DIN 55027 Carriage: Transversal strocke (X axis): 265 mm Spindle speeds: number (steps): 3 from: 3 rpm up to: 2800 rpm Taper in tailstock: Morse taper: 5 MT Spindle stroke: 160 mm Spindle diameter: 80 mm Rapid traverse X: 5 m/min Rapid traverse Z: 10 m/min Spindle motor: 16.5 kW Voltage 50 Hz 3x: 400 Volt Total power required: 16 kVA Machine´s weight about: 3000 kg Various accessories: 3-jaw chuck diameter: ROTA-S 250 mm 4-jaw chuck diameter: 250 mm Set of jaws Set of jaws hard Travelling steady Lamp Tailstock Coolant system Interface serial port RS 232 Chip conveyor  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL PC Fusion 640M Operating hours: 77200 Technical data Number of axis total: 9 Number of spindles: 2 Spindle hole: 88 mm Turning diameter: 610 mm Turning length: 1105 mm Carriage: Longitudinal travel (X-axis): 1137 mm Transversal strocke (X axis): 580 mm Transversal travel (y-axis): 210 mm Tool magazine stationary, number of tools: 80 KM 63 C axis (spindle,resolution): 0 - 360 ° / 0.001 ° Spindle speeds: stepless from: 35 rpm up to: 3500 rpm Milling cutter speeds: 10000 rpm Rapid traverse X: 30 m/min Rapid traverse Z: 20 m/min Rapid traverse Y: 15 m/min Total power required: 26 kW Machine´s weight about: 12000 kg Overall dimensions machine: Length: 5300 mm Width: 3000 mm Height: 2800 mm Various accessories: 3-jaw chuck diameter: 2 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: NUM Technical data Spindle hole: 43 mm Carriage 1: Longitudinal travel (Z-axis): 240 mm Transversal strocke (X axis): 150 mm Transversal travel (y-axis): 100 mm Carriage 2: Longitudinal travel (X-axis): 340 mm Cross travel (z-axis): 340 mm Y axis: 100 mm Turret slide: Number of positions: 16 Number of positions turret back side: 8 Driven tools turret 1: 16 Back spindle: Voltage 50 Hz 3x: 400 Volt Total power required: 17 kW Various accessories: High pression colant device Paper filter facility Oil mist extractor Bar feeder: LNS Interface serial port RS 232 Chip conveyor Toolholders Set of toolholders Driven tool holder radial (nbr.): 5 Driven tool holder axial (nbr.): 9 Tool holder fix (nbr.): 6 Tool holder (number): 6

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 21i-TB Operating hours: 3692 Technical data Taper in spindle: A2-5 Spindle hole: 51 mm Turning diameter: 300 mm Bar diameter with collet: 24 / 36 mm Carriage: Longitudinal travel (Z-axis): 370 mm Cross travel (x-axis): 210 mm Turret slide: number: 1 Driven tools turret 1: 12 Spindle speeds: 30 - 6000 rpm Power of driven tools: 2.2 / 3.7 kW C axis (spindle,resolution): 0.001 ° Spindle speeds: stepless from: 50 rpm up to: 5000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 10 m/min Machine´s weight about: 3000 kg Overall dimensions machine: Length: 2530 mm Width: 1400 mm Height: 1840 mm Various accessories: Lamp Coolant system Foot pedal

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 0 Technical data Centre height: 275 mm Distance between centres: 600 mm Swing over cross-slide: 150 mm Swing over bed: 600 mm Turning length: 610 mm Carriage: Longitudinal travel (Z-axis): 600 mm Transversal strocke (X axis): 460 mm Resolution: 0.001 mm Turret slide: number: 1 "DUPLOMATIC" Number of positions turret 1: 12 Fixed tools turret 1: 6 Driven tools turret 1: 6 Inner cone diameter: 20 x 20 mm Inner cone DIN: VDI 30 Taper in spindle: Camlock: A2-6 Inner taper type: B 32 / B 45 / F 48 Collet bore: 24 / 36 / 42 mm C axis Spindle speeds: stepless up to: 4000 rpm Inner taper type: F66 Internal spindle diameter: 60 mm Feeds: stepless longitudinal from: 0 mm/min up to: 5000 mm/min transversal ...

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

Lathe was bought fully reconditioned from a reseller in 1996 and has been used since 2010. Mechanically is in good conditions, NC is to be checked.

KAAST Millex VPlus 7 CNC machining Centre way back in 2011 complete with Siemens Controller 802S

Control Heidenhain TNC 407 Working routes x/y/z about 600 mm / 350 mm / 400 mm Spindle speed range 20 - 4,000 rpm Tool holder SK 40 Drive power 5.5 kW Power requirement about 12 kW Machine weight about 2.2 kW Dimensions width/depth/height about 3.44 m / 3.05m / 1.91 m Accessories: Touch system for digitization

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Technical data Centre height: 125 mm Swing over cross-slide: 115 mm Swing over bed: 200 mm Max. turning diameter: 270 mm Maximum turning length: 265 mm Carriage: Longitudinal travel (Z-axis): 400 mm Transversal strocke (X axis): 150 mm Turret carriage: Type: VDI-20 Number of positions turret 1: 8 Fixed tools turret 1: 4 Driven tools turret 1: 4 Taper in spindle:: D1-3" Camlock Inner taper type: B32 Spindle speeds: stepless from: 30 rpm up to: 5000 rpm Spindle power: 5.5 / 7.5 kW Feeds: stepless longitudinal from: 0 mm/min up to: 5000 mm/min transversal from: 0 mm/min up to: 5000 mm/min Rapid traverse:: 7.5 m/min Spindle motor: 5.5 kW Air connect: 5 - 6 bar Voltage 50 Hz 3x: 380 Volt Total power required: 15 kVA Machine´s weig ...

Key data: 1030 Fanuc, 1650 21 i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T 3 Chuck Kitagawa 630 mm Chip conveyor Tool eye Tool holders in Revolver Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Key data: 670 Mazatrol, 1380 640 M

Turning diameter: 670 mm Turning length: 1380 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 4   CNC Brand: Mazatrol CNC Model: 640 M Max. turning Ø:  670mm X-Axis:          740mm Y-Axis:          410mm Z-Axis:          1.380mm B Axis:          270° Speedrange:      4000Rpm Spindle power:   30kW Subspindle speeds:4000Rpm ATC / revolver:  40 Capto C6  Speed live tools:4000Rpm Length:          7.000 mm  Width:           3.000 mm  Height:          3.000 mm  Weight:          15.000 kg 

Key data: 550 Fanuc, 550 21 iTB, 12

Turning diameter: 550 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 iTB C – Axis 360.000 positions Chuck spindel 250 mm Chuck sub spil 160 mm Package with tool holder some driven Collet device with collets Max. turning Ø:  550mm X-Axis:          210mm Z-Axis:          550mm Spindle bore:    65mm Speedrange:      4000Rpm Spindle power:   15kW Subspindle speeds:4000Rpm Subspindle power:11kW ATC / revolver:  12 Speed live tools:4000Rpm Speed live tools:4000Rpm Power live tools:5,5 kW Chip conveyor:   yes  Length:          3.200 mm  Width:           1.900 mm  Height:          2.100 mm  Weight:        ...

Key data: 1030 Fanuc, 1650 18i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 720 Fagor, 3000 8055

Turning diameter: 720 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: Fagor CNC Model: 8055 Swing over bed Ø:        720mm Swing over cross slide Ø:470mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           17kW Bed width:               430mm Tailstock spindle Ø:     100Ø Stroke pinole:           200mm Spindle taper:           5Mk Workpiece weight:        2.560Kg Speeds / ranges:         1600Rpm Feed rate X-Axis:        8.000mm/min. Feed rate Z-Axis:        8.000mm/min. Length:                &n ...

Key data: 530 Okuma, 1000 OSP-U100, 12

Turning diameter: 530 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP-U100 Max. turning Ø: 530mm X-Axis:         280mm Z-Axis:         1.000mm Spindle bore:   100mm Speedrange:     4500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  120mm Quill Ø:        90mm Length:         2.200 mm  Width:          2.000 mm  Height:         2.200 mm  Weight:         6.200 kg 

Key data: 630 _Unknown / Other, 3000 Style

Turning diameter: 630 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Style C-Axis Barufaldi Revolver 8 positions live driven tools SCHUNK chuck Renishaw taster Under power 02.2022 Swing over bed Ø:        630mm Swing over cross slide Ø:405mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           40kW Bed width:               450mm Tailstock spindle Ø:     105Ø Stroke pinole:           225mm Spindle taper:           5Mk Workpiece weight:        1.500Kg Speeds / ranges:         2000Rpm Feed rate X-Axis:        8.000mm/mi ...

Key data: 850 Fanuc, 1350 Oi, 12

Turning diameter: 850 mm Turning length: 1350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         1.350mm Spindle bore:   102mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5000Rpm Power live tools:7,5 kW Chip conveyor:  Yes  Stroke pinole:  5mm Quill Ø:        100mm Length:         4.500 mm  Width:          2.105 mm  Height:         2.300 mm  Weight:         7.500 kg 

Key data: 1380 Siemens, 15000 Sinumerik 850

Turning diameter: 1380 mm Turning length: 15000 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Sinumerik 850 Swing over bed Ø:        1.380mm Swing over cross slide Ø:1.200mm DBC Turning Length:      15.000mm Spindle power:           98kW Tailstock spindle Ø:     230Ø Stroke pinole:           300mm Workpiece weight:        23.000Kg Speeds / ranges:         600Rpm Length:                  20.000 mm  Width:                   6.000 mm  Height:                  3.000 mm  Weight:                  60.000 kg  12 ...

Key data: 1380 Siemens, 10000 Sinumerik 850, 12

Turning diameter: 1380 mm Turning length: 10000 mm Turret positions: 12 CNC Brand: Siemens CNC Model: Sinumerik 850 swing over carriage 1200 4 chuck 1200 mm open steady rest motorized tailstock C Axis 360.000 work load 18.000 Kg Max. turning Ø:1.380mm X-Axis:        640mm Z-Axis:        10.000mm Spindle bore:  80mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:12 Stroke pinole: 300mm Quill Ø:       230mm Length:        13.000 mm  Width:         4.500 mm  Height:        3.000 mm  Weight:        40.000 kg 

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840C Technical data Number of spindles: 2 Number of revolvers: 2 Spindle hole: 65 mm Turning diameter: 200 mm Turning length: 400 mm Turret slide: Number of positions turret 1: 14 Number of positions turret 2: 14 Driven tools turret 1: 14 Driven tools turret 2: 14 Spindle speeds: 6000 rpm Power of driven tools: 5.5 kW Inner cone DIN: 69 880 Indexing time: 0.4 sec Upper turret head: X axis: 155 mm Y axis: 120 mm Z axis: 400 mm Lower turret head: X axis: 105 mm Z axis: 400 mm Main spindle:: HAINBUCH Internal spindle diameter: 60 mm Spindle speeds: stepless up to: 6000 rpm Back spindle:: HAINBUCH max. speed: 6000 rpm Internal spindle diameter: 60 mm Spindle diameter: 160 mm Back spindle stroke: 445 mm Rapid traverse X: 22.5 m ...

Key data: 1400 Siemens, 2450 840 D

Turning diameter: 1400 mm Turning length: 2450 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 840 D Output 1 wheel set 1 hour   Rail track gauge:         1435 + 1000 mm Max. wheel tread Ø:       1.400mm Min. wheel tread Ø:       500mm Max. axle length wheel set:2.450mm Speeds / ranges:          133Rpm Number of slides:         2 Power:                    2 x 30 kW Length:                   8.900 mm  Width:                    8.000 mm  Height:                   3.500 mm  Weight:              &nbs ...

Key data: 900 Fanuc, 1650 18i-T

Turning diameter: 900 mm Turning length: 1650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:900mm X-Axis:        470mm Z-Axis:        1.650mm Speedrange:    1-800 Rpm Spindle power: 45kW ATC / revolver:12 Control:       Fanuc 18i-T  Chip conveyor: Yes  Length:        5.030 mm  Width:         2.300 mm  Height:        2.800 mm  Weight:        16.100 kg  Tailstock Renishaw HPA Tool Setting Arm Filtermist FX 7002 Mist Extraction Unit & Foot Switches  

Key data: 175 Traub, 650 TX8i-S

Turning diameter: 175 mm Turning length: 650 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 12   CNC Brand: Traub CNC Model: TX8i-S X-Axis:          175mm Y-Axis:          40mm Z-Axis:          650mm Spindle bore:    65mm Speedrange:      5000Rpm Spindle power:   24kW Subspindle speeds:7000Rpm Subspindle bore: 42mm Subspindle power:28kW Length:          6.500 mm  Width:           2.400 mm  Height:          2.400 mm  Weight:          10.000 kg  Upper left turret: Positions 10 Driven station 10 X/Z Stroke 175 / 650 Y Stroke 40 Vdi 30 Speeds 6000 Rpm Lower right turret Positions 10 Driven station 10 X/Z S ...

Key data: 760 Mazatrol, 1585 Matrix Nexus

Turning diameter: 760 mm Turning length: 1585 mm Turret positions: 0 CNC Brand: Mazatrol CNC Model: Matrix Nexus Max. turning Ø:         760mm X-Axis:                 630 + 230 (X2) mm Y-Axis:                 230mm Z-Axis:                 1.585mm B Axis:                 225 ° Spindle bore:           77mm Speedrange:             4000Rpm Spindle power:          30kW Subspindle speeds:      4000Rpm Subspindle bore:        77mm Subspindle power:       26kW ATC / revolver:         40 Capto C6  B-Axis Too ...

Key data: 2000 , 9470

Turning diameter: 2000 mm Turning length: 9470 mm Turret positions: 0 Make: Ravensburg Type: KVH3 - 1000 CNC YOP: 2005 Max. turning Ø:2.000mm X-Axis:        780mm Z-Axis:        9.470mm Spindle bore:  150mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:4 Length:        17.000 mm  Width:         6.500 mm  Height:        3.200 mm  Weight:        67.000 kg  Work load 15 t (20t) Hydrostatic guideways support Chuck 1300 mm Siemens 840 power line X/Z/C Axis C Axis 360.000 direct driven Sauter 4 position tool system CAPTO C6 2 x Steady rest 500 + 750 mm Milling attachment Sk40 / 1500 RPm / 4,5 kW

Key data: 350 Mazatrol, 365 T Plus, 12

Turning diameter: 350 mm Turning length: 365 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Mazatrol CNC Model: T Plus Make: MAZAK Type: Multiplex 610 + Flex GL50N Control: Mazatrol T Plus YOP: 1995 Gantry loader Flex GN50L Power 58 kW Double spindel Double turret Live / Driven tools Milling and Turning ! Max. turning Ø:350mm X-Axis:        200mm Z-Axis:        365mm Spindle bore:  52mm Speedrange:    5000Rpm Spindle power: 11kW ATC / revolver:12 Length:        7.000 mm  Width:         3.500 mm  Height:        3.000 mm  Weight:        7.000 kg 

Key data: 1000 Siemens, 3936 840D Shopturn

Turning diameter: 1000 mm Turning length: 3936 mm Turret positions: 0 CNC Brand: Siemens CNC Model: 840D Shopturn Motorised Tailstock Siemens 840D shopturn Steady rest 4 chuck 1000 mm 3 chuck   630 mm Chip conveyor 4000 mm x 1100 Hohe Parat tool system with insert Max. turning Ø:1.000mm X-Axis:        750mm Z-Axis:        3.936mm Spindle bore:  160mm Speedrange:    660Rpm Spindle power: 39kW Chip conveyor: Yes  Pinole taper:  6Mk Stroke pinole: 300mm Quill Ø:       160mm Length:        10.000 mm  Width:         2.600 mm  Height:        2.600 mm  Weight:        14.000 kg 

Key data: 390 Fanuc, 800 18i-TB, 12

Turning diameter: 390 mm Turning length: 800 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-TB Gantry loaded Bar feeder Double chuck 250 mm Axis X1 / X2 / Z1 / Z2 / C1 / C2 / Y / B Axis Max. turning Ø:  390mm X-Axis:          255mm Y-Axis:          120(+60/-60) mm Z-Axis:          800mm B Axis:          800° Spindle bore:    76mm Speedrange:      3500Rpm Spindle power:   26kW Subspindle speeds:4000Rpm Subspindle power:26kW ATC / revolver:  12 Speed live tools:4000Rpm Chip conveyor:   Yes  Tool eye:        Yes  Length:          4.000 mm  Width:           3.200 mm  Height:          ...

Turning diameter: 570 mm Turning length: 1330 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18-T Max. turning Ø: 570mm X-Axis:         282mm Z-Axis:         1.330mm Spindle bore:   77mm Speedrange:     3500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  100mm Quill Ø:        100mm Length:         4.000 mm  Width:          2.000 mm  Height:         2.100 mm  Weight:         6.700 kg 

Turning diameter: 780 mm Turning length: 975 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Gear box driven Kitagawa B-210 chuck Max. turning Ø:780mm X-Axis:        245mm Z-Axis:        1.000mm Spindle bore:  87mm Speedrange:    3500Rpm Spindle power: 18,5 kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  5Mk Stroke pinole: 100mm Quill Ø:       90mm Length:        3.400 mm  Width:         1.990 mm  Height:        2.300 mm  Weight:        6.500 kg 

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of spindles: 2 Number of revolvers: 2 Spindle hole: 65 mm Turning diameter: 200 mm Turning length: 400 mm Turret slide: Number of positions turret 1: 14 Number of positions turret 2: 14 Driven tools turret 1: 14 Driven tools turret 2: 14 Spindle speeds: 6000 rpm Power of driven tools: 5.5 kW Inner cone DIN: 69 880 Indexing time: 0.4 sec Upper turret head: X axis: 155 mm Y axis: 120 mm Z axis: 400 mm Lower turret head: X axis: 105 mm Z axis: 400 mm Main spindle: Internal spindle diameter: 60 mm Spindle speeds: stepless up to: 6000 rpm Back spindle: max. speed: 6000 rpm Internal spindle diameter: 60 mm Spindle diameter: 160 mm Back spindle stroke: 445 mm Rapid traverse X: 22.5 m/min Rapid traverse Z: 45 ...

Turning diameter: 450 mm Turning length: 900 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D SPINNER - TC 800 110 CNC Lathe Ø 450 x 900 mm C-Axis MACH - ID 6415 Make: SPINNER Type: TC 800 110 Control: SIEMENS 840D YOP: 2018 Glass scales X/Z Axis Shop turn MAHLE Filter mist A11 Spindle nose Dust Enviro 850 – 3500 M3 Grundfuss ikz 15 Bar Max. turning Ø:450mm X-Axis:        360mm Z-Axis:        900mm Spindle bore:  110mm Speedrange:    2600Rpm ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  4Mk Length:        4.700 mm  Width:         2.000 mm  Height:        2.200 mm  Weight:        7.500 kg 

Turning diameter: 400 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D Max. turning Ø: 400mm X-Axis:         267,5 mm Z-Axis:         500mm Spindle bore:   91mm Speedrange:     4000Rpm Spindle power:  17,5 kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  yes  Pinole taper:   4Mk Length:         3.500 mm  Width:          2.400 mm  Height:         2.400 mm  Weight:         5.000 kg 

Turning diameter: 650 mm Turning length: 600 mm Turret positions: 12 CNC Brand: Siemens CNC Model: 840 D DMG MORI - ecoTurn 450 CNC Lathe Ø 650 x 600 mm C-Axis Live Tools MACH - ID 6373 Make: DMG MORI Type: ecoTurn 450 Control: SIEMENS 840D YOP: 2016 Max. turning Ø    650 mm X-Axis         267,50 mm Z-Axis          600 mm Spindle bore        65 mm Speedrange          4000 Rpm Spindle power      17,5 kW ATC / revolver      12 Speed live tools     4000 Rpm Control         Siemens Chip conveyor       Yes Pinole taper           5 Mk Length    4.200 mm Width      2.875 mm Height&nbs ...

Turning diameter: 220 mm Turning length: 200 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi TONGTAI - HS 22 - M CNC Lathe Ø 220 x 200 mm C-Axis Live Tools MACH - ID 6367 Make: TONGTAI Type: HS 22 - M Control: Fanuc Oi YOP: 2012 Max. turning Ø    220 mm X-Axis       155 mm Z-Axis        220 mm Spindle bore      26 mm Speedrange        6000 Rpm Spindle power       11 kW ATC / revolver       12 Speed live tools       4500 Rpm Power live tools       5.5 kW Length     1.410 mm Width       1.450 mm Height       1.730 mm Weight      2.350 kg

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders

Turning diameter: 220 mm Turning length: 200 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi-TD TONGTAI - HS - 22 CNC Lathe Ø 220 x 200 mm MACH - ID 6366 Make: TONGTAI Type: HS - 22 Control: Fanuc Oi-TD YOP: 2015 Max. turning Ø   220 mm X-Axis    155 mm Z-Axis     220 mm Spindle bore     26 mm Speedrange      6000 Rpm Spindle power     11 kW ATC / revolver      12 Length    1.410 mm Width     1.450 mm Height    1.730 mm Weight     2.350 kg

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders

Turning diameter: 900 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: OT DOOSAN - PUMA 450 CNC Lathe Ø 900 x 1000 mm MACH - ID 6351 Make: DOOSAN Type: PUMA 450 Control: Fanuc OT YOP: 1997 Max. turning Ø    900 mm X-Axis    370 mm Z-Axis    1.075 mm Spindle bore       117 mm Speedrange         2000 Rpm Spindle power    37 kW ATC / revolver    12 Chip conveyor      yes Pinole taper          6 Mk Stroke pinole       150 mm Quill Ø     150 mm Dimensions Length      6.200 mm Width        2.460 mm Height       2.800 mm Weight      14.000 kg