cnc center used for sale

HJ-4S wide universal milling machine. Analog of SF-676 machine. New in stock in the city of Yekaterinburg The machine allows you to perform various operations: milling flat and shaped planes, drilling, tapping, centering, counterbore, boring, chiseling, marking and other types of work. The machine can machine parts of the most complex configurations in various materials and with high precision. It is possible to use a huge variety of tools and fixtures on the machine. Table with characteristics in the photo

Fiber Laser welder 1 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported.

Fiber Laser welder 1,5 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Manual laser welding devices with optical fiber laser emitters are the latest development in the field of welding technologies, which replaced argon arc welding. They are used for welding such metals as stainless steel, iron, aluminum and other metals.

Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃  ...

Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 � ...

Control: SIEMENS 840D Max.turning length: 450 mm Max swing diametr over bed/Slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l M

Control: Heidenhain Max.turning length: 450 mm Max swing diameter over bed/slide: 500 mm/375mm Workpiece diametr: 246 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:12 Taper ? VDI30 Coolant tank:175l Ma

Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330  ...

HAAS TM-1P CNC vertical machining center was manufactured in 2014 in the United States. This extremely easy-to-use machine with extensive machining capabilities ensures efficient and precise machining of workpieces over its entire lifetime. The machining process is performed on a stable work table using reliable components in the form of cutting tools and a high-speed spindle. In addition, each tool is continuously measured by an extremely accurate RENISHAW measuring probe to ensure that the process runs continuously and without any interruptions. All machining parameters are programmed in the intuitive HAAS CNC control. The perfectly optimised controller allows for the creation of advanced machining programmes in just a few steps, without knowledge of G-codes. The HAAS TM1P CNC machining center is also offered with optional equipment which includes, among others, milling heads, colle ...

DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and  ...

The CNC milling center HWACHEON VESTA 1050B 8K was manufactured in 2013. Technical parameters of the HWACHEON VESTA 1050B 8K milling center – CNC control: FANUC Series Oi-MD – table size: 1150×600 mm – X / Y / Z axis movement range: 1000/600/600 mm – maximum table load: 1000 kg – spindle speed: 8000 rpm – spindle power: 18.5 / 15 kW – spindle torque: 481/293 Nm – feed speed: 1-10000 mm / min – cone: BT-40 (BT-50) – number of tools: 24 – coolant tank capacity: 340 l – machine weight: 7200 kg – machining time: 14861 h Equipment of the HWACHEON VESTA 1050B 8K machining center – cooling through the spindle – chip conveyor – probes – cone BT-40

DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...

turning diameter:520 mm turning length:600 mm control:Fanuc 0i TF swing diameter over bed slide:320 mm max. turning diameter:280 mm Bar capacity:51 mm spindle speeds:4500 1/min. x-travel:200 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min tailstock quill stroke:100 mm tailstock adjustment:500 mm spindle drive:11/15 kW Machine size (LxWxH):3,440x1,820x2,380 mm machine weight:4100 kg live center:4 MK turret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mm brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. un ...

DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool selection. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising mach ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

turning diameter:280 mm turning length:250 mm control:Fanuc 0i TF swing diameter over bed slide:280 mm Bar capacity:44 mm spindle speeds:4800 1/min x-travel:155 mm y-travel:+/-35 mm z-travel:250 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:11/15 kW Machine size (LxWxH):1.842x2.793x2.446 mm machine weight:5000 kg feeds:0.001-500 mm/U c-axis:0.001 ° turret:16-fach, BMT-55 type Y-axis:über Revolver mm hollow chuck:hydr. 200 mm :8 bar tailstock:ohne! brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. unit for chuck with air ...

turning diameter:360 mm turning length:530 mm control:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mm swing diameter over bed slide:360 mm Bar capacity:64 mm spindle speeds:3500 1/min spindle speed:Gegenspindel: 5000 1/min x-travel:230 mm y-travel:±51 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:17 (Hauptspindel) kW spindle drive:5,5/7,5 (Gegenspindel) kW Machine size (LxWxH):3290x2180x2337 mm machine weight:6100 kg c-axis:0.001 ° turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mm hollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 bar hydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor)  ...

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

MAZAK SQT 15MS CNC turning center built in 1992 in Japan, is the best choice for any manufacturing facility. All of this is due to the 12-position toolhead and two powerful spindles (main spindle and sub-spindle) that maximise turning efficiency while maintaining high accuracy and precision. There is also an easy-to-use MAZATROL T32-3 CNC controller with a colour screen through which all machining parameters are programmed in just a few steps. The total weight of the machine is 4700 kg. Technical specifications of the MAZAK SQT 15MS CNC lathe General data - feed rate in X/Z axis: 180/575 mm - maximum workpiece diameter: 300 mm - maximum workpiece length: 531 mm - bar diameter: 51 mm - X-axis positioning accuracy: ± 0.002 mm - Z-axis positioning accuracy: ± 7 s - C-axis positioning accuracy: ± 0.003 mm - tool clamping force: 42140 N - tool head indexing time: 1.4 s/full st ...

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

DMG GILDEMEISTER CTX 310 CNC turning center was manufactured in 2002. The machine with its small size and extensive equipment can fully automate the machining process of workpieces with a maximum diameter of 390 mm while maintaining high precision and reduced operating costs. The GILDEMEISTER CTX 310 CNC lathe is equipped with a 12-position tool head, an easy-to-use SIEMENS SINUMERIK 840 D CNC controller and a reliable powerful spindle rotating at a maximum speed of 5000 rpm. The total weight of the machine is 3400 kg. Technical specifications of the DMG GILDEMEISTER CTX 310 lathe - CNC controller: SIEMENS SINUMERIK 840 D - turning diameter (in tusk): 390 mm - turning diameter (over bed): 310 mm - minimum turning diameter: 8 mm - maximum spindle rotational speed: 5000 rpm - spindle passage diameter: 50 mm - 12-position tool head - tool holder: VDI 30 - operating hours: 35979 ...

new CNC working center Brand: Cosmec Type: Smart 30, 4 Axis example configuration: other equipment on request the smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces the controlling: OSAI CNC system controlling + Aspan CAD-CAM Software: - Aspan uses simple commands to perform machining - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Various macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing - Different door types are already stored (doors with milled arches, round doors...) - Doors can be modified individ ...

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

CNC machining center cover MAHO DMC 60 U hi-dyn, 2 pallets, head universal Year: 2002 country of origin: Germany workspace: X: 600 mm Y: 700 mm w: 600 mm pallet 630 x 500 mm spindle speed: 18 000 RPM tool Magazine: 120 St Tool holder: SK 40 control CNC HEIDENHAIN 422 weight: 9 000 kg total connection requirements: 44 kVA

max. workpiece length: 5150 mm profile spindle: 1 Stück main drive: 16 kW Control: Beckhoff CNC Number of axles: 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm, Y = 1500 mm, Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid ...

max. workpiece length: 4400 mm profile spindle: 1 Stück main drive: 19,2 kW CNC machining center MASTERWOOD 4 WIN with automatic loading and unloading -------------------------------------------- Specially designed for a rational and flexible wooden window u. door production HIGHLIGHTS: - Various tool magazines for optimal tooling - Simultaneous feeding with up to 6 workpieces - patented clamping system for optimum machining of workpieces - CNC controlled work table with automatic positioning of the beams and Stretcher - Automatic reclamping for changing between external and internal profiling - INTEGRATED windowing software, i. Machine does not have to (but can Of course) be controlled from the office with external industry software. - powerful engine with 19.2 kW HSK-63 E - Loading and unloading conveyor Ask for a quote and see for yourself unbeatable value for money! VIDEO from the m ...

Mazak VTC-200C CNC Vertical Machining Center CNC : Mazatrol PC Fusion 640 M. Table size : 2000 x 1250 mm X : 1660 mm Y : 510 mm Z : 510 mm

Deckel Maho 64v linear CNC Machining Center X-640mm Y-600mm Z-500mm A-360 ° Spindle-12000rpm Displacement: X-70m / min Y-40m / min Z-40m / min New spindle installed 2018 CNC: HEIDENHAIN- ITNC 530 The machine is in operation, any check is possible. The machine comes with two creaks and a touch test.

Microcut Challenger MCV-2418 - CNC Machining Center - Fagor 0i-mc CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters Btl9ijraac - Year of construction 2005 Specification - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverses: 24 m/min - Speed working spindle: 8000 rpm - Tool holder: BT40 - Table size : 762 x 363 mm - Table load max.: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Pinnacle LV117 - CNC Machining Center - Heidenhain iTNC530 CNC control - Tool changer with 30 places - Additional tank for internal spindle cooling (20 bar) 580 liters - Paper tape filter - Year of construction 2012 Specification Table: - Table size: 1300 x 700 mm - Travel ranges X/Y/Z: 1140 x 710 x 610 mm - Max. table load: 1000 kg - Spindle nose to table surface: 110 - 720 mm - T-slot width/spacing/number: 18 mm / 125 mm / 5 Spindle: - Tool holder: ISO40 - Spindle diameter: 70 mm - Distance between spindle centre and column: 760 mm - Spindle speed: 40 - 8000 rpm - Main motor: 7.5 kW Feed: - Rapid traverses X/Y/Z: 24 / 24 / 24 m/min - Feed speed X/Y/Z: 10000 mm/min ISO40 Automatic Tool Changer: - ATC Type: DISK - Cam type: DAUL ARM - Tool selection (bidirectional): random - Tool positions: 30 - Max. tool diameter: 90 mm - Max. tool length/weight: 250 mm ...

Key data: 240 mm, 180 mm

Muratec MT-12 CNC turning center (2 spindles, 2 turrets and driven tools) CNC control Muratec-Fanuc 18i-TA Turning diameter 240 mm Turning length 180 mm Spindle bore diameter 51/45 mm X-axis travel 200 mm Travel Z-axis 200 / 650 mm Distance between spindles 650 mm Spindle speed 4500 rpm Spindle nose A2-5 Number of revolvers 2 Number of tools on the turret 15 Number of driven tools 15x If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 240 mm, 180 mm

Muratec MT-12 CNC turning center (2 spindles, 2 turrets and driven tools) CNC control Muratec-Fanuc 18i-TA Turning diameter 240 mm Turning length 180 mm Spindle bore diameter 51/45 mm X-axis travel 200 mm Travel Z-axis 200 / 650 mm Distance between spindles 650 mm Spindle speed 4500 rpm Spindle nose A2-5 Number of revolvers 2 Number of tools on the turret 15 Number of driven tools 15x If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 820 mm, 3048 mm

Mazak Integrex E-500H-ll x 3000 CNC Multitasking Turning/Milling Center CNC Control Mazatrol Matrix Dreg diameter 820 mm Turning length 3048 mm Spindle bore diameter 91 mm Spindle nose JIS A2-11 Speed 35 - 3500 rpm Milling head speed 5000 rpm X-axis travel 870 mm Travel Y-axis +250 / -250 mm Z-axis travel 3122 mm Travel B-axis -30/+210° C-axis indexing 350° Tool Cone Capto C8 Tools in Magazine 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 390 mm, 800 mm

For sale: Daewoo Puma CNC turning center type TT2500SY with a Fanuc 18iTB controller. This is a CNC lathe with 2 spindles with a full C-axis, 2 turrets (BMT-65) with 12 positions (with intermediate positions) and a Y-axis on the top turret. All (driven) tool holders, including 2 driven holders in the angle, as well as a complete set of collets etc. are included with the machine. The machine also includes a 250 mm chuck for the main spindle.

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vertical CNC machining center Manufacturer SW Schwäbische Werkzeugmaschinen Type BA35 Year of construction 1998 Control Siemens 840D Travel X/Y/Z 2150/500/500 Work train holder SK40 max spindle speed 10,000 rpm 36 compartment tool changer Conveyor IKZ internal coolant supply

Awea BM-850 CNC Machining Center Machine is in very good condition Machine has been revised in 2019 Control unit : Fanuc X : 850 mm Y : 600 mm Z : 600 mm

CNC machining center - X: 650 mm - Y: 510 mm - Z: 510 mm - Clamping surface: 800 x 450 mm - T-slots: size/number/distance 18/4/100 mmm - Table load: max. 400 kg - Working height: 760 mm - Spindle Ø: 65 mm - Speed range: 8000 rpm - Spindle power: 7/9.25 kW - Tool holder: SK 40 - WZ changer: 16-fold - Tool Ø max.: 80 mm - Tool length max.: 250 mm - Tool weight max.: 6 kg - Rapid traverse: 16000 m/min - Control: Siemens 802D - Machine weight: 3500 kg - Dimensions for space (W x D x H): 2.15 x 2.1 x 2.45 m - Condition: good Accessories Documentation, no other accessories

CNC TURNING CENTER Condition Used Very good condition Control type Siemens Sinumerik 828D Maximum workpiece vaulting Ø 750 mm Max. workable diameter Ø 500 mm workable length 1.260 mm Turning diameter from bar max. Ø 90 mm Self-centering diameter Samchully Ø 315 mm Spindle hole Ø 102 mm Spindle speed 3,000 rpm Motor power 22/18,5 Kw X Shaft Stroke 335 mm Z Axis Stroke 1.350 mm Rapid feed X-Z 20-24 m/min Axis C 0,001° Tool turret 12 positions Motorized unit rotation speed 4,000 rpm MT5 tailstock cone Steerer diameter Ø 100 mm Tailstock stroke 1.350 mm Chip Evacuator Accessories

Haas HAAS UMC 750 Machining Center :::SPECIFICATIONS::: CNC Model: Haas Tool connection: iso 40 Spindle power: 22,4Kw Number of spindle revolutions: 12000 Number of tools: 40 X Shaft Travel: 762mm Y-axis stroke: 508mm Z-axis stroke: 508mm Rapid feed linear axes X Y Z: 30,5m/min Guides: roller Tilting rotary table: yes Round table type: continuous Grades rotary table: + 110 -35 Table size: 630 x 500mm Load allowed on the table: 300Kg High cooling pressure: yes Pressure value: 21bar Chip evacuator: carpet Presetting: yes Machine equipment: - P-COOL programmable refrigerant nozzle - Extended memory 750 MB - High-speed machining package - Ethernet interface - VISUAL QUICK LOAD conversational conversation programming system - Early detection of power failures request form - Auxiliary refrigerant filter system - ...

HYUNDAI L230LMSA WIA Versatile CNC Turning Center Machine is like new condition Swing over the bed : 600 mm Swing over the carriage : 355 mm Maximum turning diameter : 310 mm Maximum turning length : 521 mm

Vertical CNC Milling Center ANAYAK ANAMATIC 9 Year of construction 7/97 Currently dismantled and prepared for transport. The machine was in production until mid-2022 Immediately available and ready to use Technical Parameters: Work table length 1300 mm Work table width 530 mm Maximum table load (uniform) 500 kg Number of tools in the storage container 30 pieces Minimum vertical spindle speed 70 1/min Maximum vertical spindle speed 5000 1/min Mechanical feed length axis X 1070 mm Mechanical feed length axle Y 535 mm Mechanical feed length axis Z 510 mm Maximum Axis Feed Speed X 250 mm/s Maximum feed speed axis Y 250 mm/s Maximum feed speed axis Z 250 mm/s With Fanuc 160i-L Viewing and transport possible at any time We offer inexpensive financing / installment purchase / trade-in of machines! Maschinenhandel Nord new & used machines for industry, t ...

turning diameter:670 mm turning length:3000 mm control:840 z-axis:3150/3000 mm y-axis:-125/+175 mm x-axis:700/260 X+ mm c-axis:0,001 ° main gear-box motor:60/40 kW spindle turning speed range:2600/3300 U/min spindle diameter in front bearing:160 mm Spindle bore:115 mm lower slide:2 x 12, VDI 40 mm upper slide:25 kW no. of tools in the magazine:90 Stück workpiece length:900 mm tool taper:HSK 100 / VDI 40 rapid traverse::15/20 m/min total power requirement:140 kW weight of the machine ca.:35 t dimensions of the machine ca.:13 x 4,5 x 3,6 m CNC TURNMILL center with opposed spindles and 2 saddles, used for Alu operation only - SIEMENS 840 C control for 8 axis - Left/Right spindle with C-axis, KNCS 400 mm power chuck - Lower saddle with 2 x 12-fold revoving heads - Turning.- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000 r/min, B and Y axis - Coolant dev ...

max. turning diameter:102 mm turning length:450 mm swing dia.:494 mm bar material dia.:65 mm spindle turning speed - stepless:S1 / S2: 4.000 1/min spindle drive:S1 / S2: 18,6 / 11 kW Turret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/min work piece power:3,7 kW total power requirement:90 kVA weight of the machine ca.:10 t dimensions of the machine ca.:6 x 2,5 x 2, m CNC-turning-center with 2 turrets, 8 axis, 2x 10-pockets turrets with live-tools, C-axis on both spindles, Y-axis +-35mm turret 1, 2pcs. collet-chucks, chipconveyor, barfeeder, tooleye, approx. 60.000h "machine on", approx. 17.500h "spindle on"