cnc boring used for sale

TOS W100 Horizontal Boring Mill DRO Spindle 100 mm Spindle speeds 7.1-1120 rpm X/Y/Z/W Axis- 1600/1120/1250/900 mm Table size 1250x1250 mm Max table load 3 ton Table type rotary Facing chuck diameter 600 mm Slide travel 210 mm Max facing diameter 900 mm Facing chuck speed range 7.1 - 224 rpm Total power 15 kW Dimension 6020x3000x3500 Weight 14000 kg Remarks: faceplate is available, under a fixture

Key data: 500 mm, 400 mm, 400 mm

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 50 T With track control Siemens Year of construction: 2002 Travels: X 500 Y 400 Z 400 Speed range: 20 – 9,000 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Vertical tool changer with 16 magazine slots Mode 3 + 4 Full protection cabin with interior lighting 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE IS IN GOOD CONDITION THE MACHINE COMES FROM A TRAINING WORKSHOP

spindle diameter: 200 mm x-travel: 11.000 mm y-travel: 4.000 mm z-travel: 1.600 mm w-Weg: 400 mm dimension of the ram: 520 x 520 mm tool taper: ISO 60 turning speed range: 0,8 - 800 U/min torque: 35.000 Nm bore feed range: 0,75 - 3000 mm/min milling feed range: 0,75 - 6000 mm/min : 3.000 mm/min rapid travel: 6.000 mm/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 180 kW weight of the machine ca.: 181 t dimensions of the machine ca.: ca. 16 x 6 x 9,3 m rotary table: SKODA E 25 SKODA boring table E 25 clamping area 2.000 x 2.000 mm long. movement V-axis 1.200 mm DRO Heidenhain Positip floor plates consisting of 6 platesa 5500 x 1850 x 350 mm (61,05 m²) 2 angular milling heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping width: 2000 mm clamping length: 2000 mm workpiece weight: 25000 kg bed length: 3000 mm table height: 890 mm table width: 2766 mm x-travel: 1200 mm electrics - voltage/frequency: 380/50 V/Hz dimensions of the machine ca.: 3x2x1 m weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Strokes: x 5500 z 2400 y 1100. Machine retrofitted in 2019 ECS 901 Predisposition for networking. New spindle drive. Overhauled recirculation screws. 2000x1000 cubes n ° 2. Machine in operation.

Table mm. 1250 x 920 Spindle diameter mm. 80 Tool holder ISO 40 Travel X mm. 1430 Travel Y mm. 985 Stroke Z mm. 850 Spindle speed 1500 rpm Quill stroke mm. 530 ECS CNC accessories

Sale of a second-hand horizontal boring machine UNION model BFT-80/2, year of manufacture 2003: axis travel: 1000 x 1000 x 1600 mm - spindle diameter: 80 mm -cone: ISO 40 - max. diameter of boring faceplate: 800 mm - diameter of the hole to be machined without faceplate: 450 mm - spindle extension: 500 mm - faceplate diameter: 500 mm - turntable height: 915 mm - size of the table clamping surface: 1120 x 1000 mm - table load: 2500 kg Delivery time - ready for shipment

Machine available visible in working order Table Size: X:2500mm Y:700mm Z:700mm X Axis Runs: 2500 Y Axis Strokes: 700 Z Axis Strokes: 700 Maximum Spindle Rotation Speed: 3,000 rpm Head Indexing: 2.5º Spindle power kW: 22 Government Unit: Selca 3045 Spindle connection: DIN 69871

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Main shaft cone: Morse 6 Spindle travel - W axis 680 mm Year of manufacture: 1960 Tool with accessories: 45° milling cutter, small turning head, cartridge holder, 8 different knife holders, table can be rotated. With additional water cooling. Drilling from the spindle is perfect, feeds work, stable machine!

HBM W 160 H, CNC Heidenhain iTNC 530, new 1982, after repairs 2009, spindle taper Morse 100, are reductions from M 100/HSK80

HBM WI 130 CNC Heidenhain iTNC 530, new 1969, after repairs 2008, spindle taper M 80/HSK 80

Main technical details: - Spindle diameter: 100 mm - Table size: 1100 x 1300 mm - Travels: 1250 x 1250 x 700 mm - Main motor power: 11 kW - Machine weight 14,5 to - Functional - With faceplate - With tail stock - With technical documentation

Rotary table size: 2000x2000 mm Max. load on table: 20 tons Spindle diameter: 160 mm Inner cone of spindle: 100 metrical Max. spindle torque: 250000 kgcm Bed height: 550 mm Width of bed guides: 2000 mm Max. drilling depth with boring spindle: 1600 mm Max. move-out of quill: 1250 mm Normal travel of spindle headstock on the column: 2500 mm X-axis: 3000 mm Min. height of spindle axis over bed surface: 1400 mm Range of steplessly adjustable spindle speeds: 2-800 rpm Range of steplessly adjustable drilling feeds (spindle and quill): 0,5-1600 mm/min Range of steplessly adjustable milling feeds (spindle headstock and column): 1-3200 mm/min Speed of rapid travel at drilling (spindle, quill): 1600 mm/min Speed of rapid travel at milling (spindle headstock in vertical direction, column): 3200 mm/min Power of adjustable electric motor of direct current of spindle drive: 6-55 kW R ...

Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 5205200; Maximum spindle torque: Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -Height of a bed in mm., 500; Width of bed guides in mm., 2000; Width of rack guides in mm., 1700; Total machine power 180kVA Power of the main drive in kW, 77. The machine is equipped with a rotary table weighing 49000 kg. Machine weight 102000 kg. We are ready to discuss the price and all terms, please contact us for further discussion.

Capacities: Main Table: 560 x 405mm Top Table: 455 x 455mm Long Traverse: 610mm Cross Traverse: 320mm Vertical Traverse: 285mm Spindle Speeds: 50 – 2000rpm Infinately Variable Spindle Taper: 40 Int Feeds: 4- 106mm per min Infinetley Variable   Electrics: 415v, 3ph, 50 cycles Motor: 3HP   Complete with: Coolant   DRO can be added at extra cost   Approximate Dimensions: 3200 x 1200 x 2100mm Approximate Weight: 1750kg

Saw-Drill Manufacturer: Pade Model: EV 25 Built in 1995 Sawing unit Drill gear with 5 spindles

Kunzmann Universal Milling and Drilling Machine WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...

Description: The machine is in good technical condition. Working spindle diameter: 110mm Table clamping surface: 1250 x 1250mm Machine dimensions lxwxh, 5290x4063 mm. Machine weight, 27000 kg By prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

Type: VSP 50 CNC Parameters: 11750 mm, 2000 mm Manufacturer: Tos Description: The machine is in good technical condition, after agreement the possibility of testing. Main dimensions maximum and smallest distance of the spindle axis from the stand guide: -version without tool magazine 2500/500 mm -version with tool magazine 2500/600 mm maximum and smallest spindle end distance: -from bed guide 1480/380 mm -from the base of the machine 1860/760 mm headstock adjustment 2000 mm adjustment of the headstock on a machine with a tool magazine 1900 mm arm adjustment 800 mm Sleigh adjustment: -version with one bed 1000 mm -version with two beds 4500 mm -version with three beds 8000 mm -version with four beds 11500 mm Maximum drilling diameters: diameter of drilling fully into steel with a strength of 600 MPa 50 mm diameter of drilling completely into cast iron with a strength o ...

Location: Czech Republic Description: Working spindle diameter 100 mm X-axis travel 1250 mm Travel of the Y axis 1100 mm Spindle speed 10 - 1200 /min. Central cooling does not Spindle extension (W) 630 mm Z axis travel 970 mm The toolbox does not Spindle clamping cone ISO 50. Power of the main electric motor 22 kW Table clamping surface 1000 x 1120 mm Max. workpiece weight 3000 kg Dimensions L x W x H 4746 x 3000 x 3340 mm Machine weight 13700 kg

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Maximum quill extension 1,600 mm Spindle revolutions in the range 0.8 – 630 min-1 Feeds in the range: drilling and milling 0.63 – 2,500 mm/min 0.63 – 4,000 mm/min Spindle electric motor power 77 kW Threads: metric Whitworth 0.5 – 12 mm 1 – 28 turns/1 SPINDLE VERTICAL TRAVEL ON STAND 3,150 mm STAND TRAVEL ON BED 6,000 mm DIMENSION BASE PLATES 12,800 x 5,665 mm DELIVERY TERMS The machine is currently in operation. Delivery date as agreed.

Working spindle diameter: 75mm Table clamping surface: 950x950mm Digital measuring X-axis travel 1,250 mm Y-axis travel 900 mm Z-axis travel 1,060 mm Spindle speed 18 - 1800 /min. Spindle extension (W) 560 mm Power of the main electric motor 11 kW Max. table load 3,000 kg Dimensions LxWxH 4500 x 3400 x2800 mm Machine weight 10t Inspection possible upon agreement. Accessories: support column

The machine is in good technical condition. Table working area: 950 x 950 mm Maximum table load: 3000 kg Maximum tool speed: 1800 rpm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Spindle extension W: 560 mm Po by prior arrangement, the possibility of a tour in progress.

The machine is in good technical condition, control system HEIDENHAIN 310. With circular interpolation. A tour is possible upon agreement. Basic parameters 100 mm; 1000 x 1120 mm Machine weight: 13400 kg Total power of the machine:: 20 kW Diameter of the working spindle: 100 mm Spindle taper: ISO 50 Spindle speed: 4 - 1400 rpm Table clamping surface: 1000 x 1120 mm

Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm

Year of Manufacture/SO/GO: 1987/-/2001 Description: The machine is in very good technical condition, dismantled, stored in storage. 5 persons X (table lift) 5000 mm Y (vertical lift of headstock) 2000 mm Z (longitudinal displacement of the column) 1250 mm W (spindle travel) 800 mm Engine power: 37 kW Spindle speed range: 1.25-900 rpm Rapid feed: 4000 mm/min Spindle diameter: 130 mm Table: 1800 x 1800 mm Machine weight: 12000 kg Spindle taper: ISO 50. control system HEIDENHAIN

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

Category bench boring mill Make Stankoimport Type 2 A 635 Year of construction 1974 Spindle diameter 125 mm x-travel 1600 mm y-way 1400 mm z-travel 1600 mm Table size 1800 x 1600 mm Spindle mount MK 6 Drilling depth in one go 1000 mm Quill stroke 1000 mm Speed range - spindle 8 - 1250 rpm Speed range - facing slide 5 - 315 rpm Feeds - longitudinal / transverse / vertical 1 - 800 mm / min Table can be rotated 360 ° Table load 4000 kg Division 0.5 ° Distance table - spindle center 50 - 1350 mm Face slide feeds: 1 - 800 mm / min Cross slide diameter 800 mm Spindle drive 17 kW Machine weight approx. 32.5 t Space requirement approx. 7.50 x 3.50 x 3.93 m Accessories facing slide, stick, 2 support sleeves

Dowel drilling machine long hole drilling machine. HOFFMANN Dowel Fix Type: DBL C110 Built in 1995 Dowel drilling on 2 different levels Pneumatic height adjustment of the drilling unit incl. quick-change device for drill chucks. incl. drill chuck up to 20 mm incl. 8-fold gear drill chuck incl. several drill bits. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

Used Hole Row Drilling Machine Int. Art. Ref. k0919 Manufacturer: Ganner Type 204 Red Baron Year of construction 2001 Power 0.75 kW Right and left hinge Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

The machine is in good technical condition. Spindle bore: 80 mm Taper: Morse 5 Equipment: Own crane Digital measurement 1000 x 500 console It was used once a year for light drilling or milling. By prior arrangement, the possibility of a tour in progress.

Description: Consisting of various indexable unscrewing heads Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 40 kg

Horizontal boring mill W200H, TOS Axis: X- 8000mm Y- 3150mm Z- 2000mm W- 1600mm

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas diameter dowels: 6 mm, length of 40 mm. Controlls: Powercontrol PC85 with Woodwop software

VITAP drilling machine model SUPERFAST 27: – 27-spindle head with quick coupling – aluminium guides with electronic digital indicator – drilling at 0° - 45° - 90°, from lower vertical to horizontal – pneumatic movement of the drilling head – 6-position drilling depth revolver – 4 pneumatic clamps to hold the pieces Year 2018, CE standard machine

Description: Table: 15-ton load/0.001 degree indexing/Full C axis 18.5/22kw spindle motor 60 tool ATC Scales Spindle thru coolant Chip conveyor Fanuc 31iA control Includes shipping to any major seaport in the world. x-motion: 3,000 mm, y-motion: 2,000 mm, z-motion: 1,600 mm, w - axis: 700 mm, table surface area l x w : 2,000 x 1,800 mm, turning speed range: 2,500 rpm, weight approx.: 37,200 kg, Approx. Onsite Dimension. (l x w x h): 6,320 × 6,900 x 5,049 mm

Machine in good technical condition, possibility of testing after agreement. Weight: 12000 kg Control: TNC 360. X axis (longitudinal) 1250 mm Y-axis (pricna) 1000 mm Z axis (vertical) 900 mm Table length 1000 mm Table width 1120 mm Workpiece weight 3000 kg Spindle diameter 90 mm Max. shaft speed 1120 rpm Shaft motor power 20 kW

Key data: 80 mm, 1700 mm, 1800 mm

Spindle Diameter: 80 mm Spindle Adapter: SK50 Spindle speeds: 11 - 1000 rpm. X-axis: 1700 mm Y-axis: 1800 mm Z-axis: 1800 mm Spindle off (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo Digital Readout: On Y-axis and Z-axis Equipped with: -Turntable - Some tool containers Spindle motor: 7.5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine Weight: 10 Ton

Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...

Boring head, spindle head, drilling head, plunge drilling head, grooving head, spindle drilling head, boring head, universal boring head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: UBS Gr.1 -Intake: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos -Dimensions of the case: 240/125/H100 mm -Total weight: 4.0 kg

Description: SPECIFICATIONS Character: Sacem Type: MSPC 110 Year of construction: 1976 X: 2,500 mm Y: 2,000 mm Z: 500 mm B: 1,250 mm Top name spindle: ISO 50 Spindle: ø110 mm Digital readout: SONY Panel length: 2x 3,000 mm Panel width: 2x 1,500 mm Flat turning support: 400 mm slag (including various tools) Lunettes included 2x Spindle support 1x Angled freewheel (Huron type ISO 50) Mantle freewheel: 320 + ø400 mm Angle plate: (2x) 500 x 1,330 mm / (2x) 650 x 1,700 mm / (2x) 800 x 2,800 mm Approx. Onsite Dimension. (l x w x h): 8,000 x 3,700 x 5,000 mm, weight approx.: 25,000 kg

Description: Tool holder: SK 40 Incl. various boring tools Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 20 kg

Description: Tool holder: SK 40 Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 20 kg

Description: Tool holder: SK 40 Incl. boring tool Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 20 kg

Description: Tool holder: SK 40 Incl. boring tool Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 20 kg

Description: Consisting of 4 pieces Tool holder: SK 40 Approx. Onsite Dimension. (l x w x h): 500 x 400 x 50 mm, weight approx.: 30 kg

Key data: 110 mm, 2200 mm, 1600 mm

1x used CNC-controlled horizontal boring mill Manufacturer MICROMILL Type: HBM 4 Year of construction: 2010 Control: iT 530 Controlled axes: 5 Tool changer: yes 40 places Internal cooling: yes Chip conveyor: yes Technical information Spindle diameter: 110 mm ISO 50 Table load. : 5000kg Clamping surface :1,500 x 1,250 mm Transverse travel (X)-2,200 mm Vertical travel (Y)-1,600 mm Longitudinal travel (Z)-1,600 mm Spindle stroke (W)-550 mm Table (B)-360° stepless rotary table with 0.001° pitch Rapid traverse up to max.12 m/min Speeds up to max. 3,000 rpm Spindle hours : 11000h

Key data: 500 mm, 350 mm, 375 mm

Control: MAHO 132 Direct displacement measuring system Vertical and Horizontal Spindle Table dimensions: 254x354 mm X-axis travel : 500 mm Y-axis travel : 350 mm Z-axis travel: 375 mm Tool holder: ISO40 Hydromechanical tool clamping. Quill stroke vertical spindle: 50 mm Spindle speed: 63-4,000 rpm Coolant basin and pump Chip pan Manual central lubrication Power supply : 380/50 V/Hz Total connection: 8 kVA Weight approx.: 1650 kg Machine dimensions LxWxH: 2,050x1,430x1,812 mm