We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
OM Vertical Turnmill TMD-30/40 with 2 x crossrail mounted Vertical rams + C-Axis + Milling spindle New 1990 / Retrofit in 2020 from Fanuc 15T to Siemens 840D Control Siemens 840 D Table diameter 3000 mm Turning diameter 4000 mm Turning height 3000 mm Table load max. 40 ton Distance between table & crossrail max. 3400 mm Ram horizontal travel (X) 2200 mm Ram vertical travel (Z) 2000 mm (right ram),1600 mm (left ram) Crossrail travel 2400 mm Table speed 0.4 ~ 60 rpm Table motor 55 KW Max. torque 10,000 kgM Table index C-Axis 0.001degree Milling spindle speed 3~750 rpm Spindle taper ISO 50 Milling spindle power 18.5 KW Milling feed 1~180 deg/min. Ram section 260 x 260 mm ( right ram ), 250 x 250 mm ( left ram ) Tool shank size 50 x 50 mm Machine dimension (L,W) 14,700 x 10,500 mm Condition said to be very good (please see attached photos). ...
used
Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 Mandrels MK5 - φ 16, 22, 27,32,40mm 2 Pliers chuck Clarkson 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: end mill rough/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 rough/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 700,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 threaded rods M20, L-120 – 400mm 3 x 2 pcs. clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( backing )
used
diameter:500 mm tool adaptor:50 Weight:12 kg face movement each head:82 mm feeds:0,06 mm/U
used
Boring power:10 mm weight:590 kg connected load:2 kW dimensions::1500 x 1300 x 2300 mm
used
throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm
used
diameter:400 mm tool adaptor:MK 5 Weight:10 kg Slide cross:52 mm Good condition Wohlhaupter facing head with Morse taper 5
used
diameter:300 mm tool adaptor:40 Weight:5 kg Taper ISO 40
used
diameter:200 mm Weight:4 kg
used
diameter:400 mm tool adaptor: 50 Weight:12 kg slide adjustment:52 mm feeds:0,02 - 0,24 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Tool taper:22 mm
used
diameter:280 mm tool adaptor: 40 Weight:12 kg slide adjustment:50 mm feeds:0,05 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Boring head complete with box and accessories
used
15-spindle adapter boring unit for cnc working centres Make: ATEMAG
used
49-spindle adapter drilling unit for CNC processing centres Brand: ATEMAG Type: Function Line
used
5-spindle adapter boring unit for CNC working centre Make: ATEMAG
used
Facing slide needs overhauling.
used
Clamping surface: 800x400mm, quill stroke: 150mm, rotational speed: 70-2000/min, weight: 7t.
used
INNSE, YOM: Year 1976, retrofitted 2012 Spindle: 200mm Milling spindle: 305mm X: 19800mm Y: 4500mm Z: 1500mm W: 1000mm Table stroke: 3000mm Rotary table: 5000mm Max. loading: 200t
used
For sale: Lagun universal milling machine type FU TV 125 The machine is in good condition and has a table surface of 1,250 x 280 mm and is equipped with T-slots (3 x 16 mm). The movement of the X, Y and Z axes is 850 x 290 x 475 mm The spindle holder is ISO 40. The maximum variable speed is 1,800 rpm. The spindle head can rotate from side to side and tilt from front to back! The longitudinal and transverse feed movement is 2,500 mm/min and 750 mm/min. The maximum main engine power is 5.5 hp. The maximum workpiece weight on the table is 300 kg. The total weight of the machine itself is 2,000 kg. Available from stock, subject to prior sale.
used
There are one TOS WH10 TNC and one TOS WH10 CNC available, x-travel: 1250mm, y-travel: 1100mm, z-travel: 1000mm, W-travel: 600mm, table dimensions: 1100x1000mm, with accessories, various tools, holders, spindles, cutter heads, boring heads, tool cabinets and clamping screws.
used
Portable pipe amp; bolt threading machine Pipe threads 1/4–4" = 16–63 mm Bolt threads 14–60 mm = 1/2–2" Also capable of threading plastic covered pipes
used
spindle diameter: 105 mm x-travel: 2100 mm y-travel: 1500 mm z-travel: 1400 mm Table area: 1750x2000 mm turning speeds: 16-1400 U/min table load: max. 4 t weight of the machine ca.: 18 t The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t
used
horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg
used
Boring mill turntable, used Boring table, used Typ/ type: TI 2 Manufacturer/ make : UNION Year of construction: 1984 Table size: 1800 x 2000 mm ; > 360° Fahrweg/ way : 1250 mm Feed speed: 0.5 to 1600 mm/min Tischbelastung/ table load: 15000 kp Gesamtlänge/ total length: 3500 mm Gesamtbreite/ total width: 2250 mm Weight/ weight: 7 t Feed motor: 6 kW
used
Transverse slide milling machine with digital display , used milling m/c with vertical head and DRO, used Hersteller/make: HECKERT Typ / model: FQW 400 Baujahr/ year: 1983 Tischgrösse/ table: 400 x 1600 mm Tool holder/ taper: ISO 50 max. table load: 1500 kg Verfahrweg längs / move longit.: 200 ... 1400 mm Verfahrweg quer/ move cross: 55 ... 505 mm Verfahrweg perject / move vertic.: 100 ... 525 mm Spindle speeds: 45 ... 2240 rpm in 18 steps Drive power of the milling spindle | load of spindle: 15 kW Connected load: 21 kW Masse/ weight: 4000 kg
used
Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T
used
SKODA WD 160 A Floor type boring machine - new in 1963 - refurbished 2011 - HEIDENHAIN measuring system - axis: X-axis 9100 mm Y-axis 2500 mm Z-axis 1200 mm W-axis 800 mm
used
Dowel drilling machine Brand: Ayen 21 spindle, grid 32 mm drilling head swivable 90° workpiece clamping with 3 pneumatic cylinders triggering clamps and drilling head through foot pedal clamps are moveable support table with integrated measuring scale as well as two-sided straightedge extension each one incl. a stop drilling motor: 2,2 kW Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.
used
spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm total power requirement: kW weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm + mecahincally and electrically in top condition! + The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
used
Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm
used
Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm
used
Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 MK4 im Holzkasten New ! Dimensions: 280 x 240 x 105 mm
used
Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm
used
Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm
used
x-travel: 2000 mm y-travel: 2000 mm z-travel: 1400 mm spindle stroke: 1000 mm turning speeds: 5-800 U/min Radial face slide: 700 mm Radial face slide: 2,2-115 U/min spindle taper ISO: 50 table surface area: 2000x1800 mm Table load: 14000 kg total power requirement: 42 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x4,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
Fine boring head, boring head, fine turning tool WALTER B2110M B2110M.0.25.73.029.01 Cutting edge diameter: 22 - 29 mm Total length: 80 mm New ! Dimensions ( fine boring head ): 80 x 25 x 25 mm Dimensions ( transport box ): 88 x 35 x 35 mm
used
Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm
used
Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm
used
Specifications: X-axis 2,750 mm Y-axis 2,500 mm Z-axis 2,320 mm W-axis 700 mm Spindle power 50 kW Spindle diameter 130 mm Spindle speed 1.6 – 1,600 rpm. Tool holder SK 50 Control: CNC HEIDENHAIN TNC426 Table dimensions 2,000 x 1,800 mm max. table load 8 tons B-axis 360 A° Weight approx. 37,000 kg
used
Key data: 130 mm, 4000 mm, 2500 mm
TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER
used
Inv. Num. : 6951 Type: BKoE 630x1000 Producer: VEB Generated:- Parameters: Working table length: 1000 mm Working table width: 630 mm Minimum spindle speed: 36 1/min Maximum spindle speed: 2240 1/min Maximum distance between the spindle axis and the table: 20-850 mm Spindle power: 9 kW Machine weight: 5900 kg
used
M. No.: 1767
used
Sr. No.: 70218 Equipment / Additional information: Various tools
used
Very good horizontal precision boring mill with optics and digital
used
Ref. -No.: 10353 Manufacturer: UNION Year of construction: 1986 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland X-Travel: 1600 mm Y-Travel: 1000 mm Z-Travel: 1200 mm W-Axis: 710 mm Spindle Taper: SK 40 Table Load: 2500 kg Max. Size Of Workpiece Lxwxh: Höhe 1400 mm Spindle Speed: 1600 RPM Rapid Traverse: 3,15 m / min Total Power Requirement: 23 kW Weight Of The Machine Ca.: 10,3 t
used
Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,
used
Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992
used
Manufacturer: Rapid, Type: Astglochbohrmaschine, Number of drilling spindles: 3 Spindeln Schnellkwechsel, Aperture/throat mm: 600, Units - total: 1, Main engine kW: 0,75, Drill feed - pneumatically: hand, Milling spindles vertical: 80 mm,
used
Manufacturer: Protool, Type: Bohrm. DRP 8 E, Drilling engine kW: 0,460, FREE TEXT: mit Ständer,