cnc boring used for sale

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Scheer , Type: DB 3000, Control: Fusspedal, Drilling beam swivel-mounted: yes, Number of drill spindles: 4, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 80, Beleimwerkzeuge: no, Dovel insertion: no, Work piece clamping: Pneumatisch, Pneumatic clamping: yes, Work piece support: yes, Work stations: 2, Foot switch: yes, Axis control for: no, Drilling hight: 60, Wight approx. kg: 1000, Abeitsbreite 3000 mm,

Longitudinal direction ''X''. 4500 mm Transverse direction ''Y''. 3000 mm Spindle stroke ''Z'' 500 mm Astand Spindle Table 160 – 660 mm Table load 2000 kg/m²

Condition: Very good condition

- 2 drill beams with 26 spindles each - Width adjustment by electric motor - 2 motors of 1.5 kW each

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool -Quantity: 2x spindle tools -Intake: SK50 -Spindle dimensions: 145-230/225-310 mm -Price: complete -Weight: 14 kg/pc

Boring head, spindle head, boring head, grooving head, grooving head, spindle boring head, boring head, spindle tool, facing and boring head -Boring head: Recording MK5 3 pieces -Tool holder: 8x8 mm / 35x12 mm / 12x12 mm see photos -Transport dimension.: 530/160/H45 mm -Total weight: 10.7 kg

Boring head, spindle head, boring head, grooving head, grooving head, spindle boring head, boring head, spindle tool, facing and boring head -Manufacturer.Schmid, facing and boring head type UBS GR.1 -Intake: MK4 -Dimension.: 222/87/80 mm -Weight: 3.1kg

Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, support bearing, spindle support bearing -for quill: 80 mm -Drive pin: 12 mm -Pinole head: ball bearing -Recess recording: 250 mm -Support bolt circle: 330 mm -Recording holes: 21 mm -Dimensions: 385/385/H373 mm -Weight: 58.5 kg

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Radial table drill Weibert SB3116RMN Bench drill Drilling spindle holder MK2 / MT2 Drilling spindle speed in min-1 (5) 500-2500 Quill stroke 80mm Column diameter 60mm Motor power 900W 400V 50Hz Table size 220x220 mm Drilling capacity 16 mm Projection 130-420 mm Gross weight 45kg

Horizontal boring mill WHO11NC

HBM WD 130, new in 1969, repairs 1998

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1250x1600 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 radial face slide travel: 240 mm total power requirement: 90 kW weight of the machine ca.: 26,3 t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 200 mm, 350 mm

1 universal tool milling machine Make: EMCO Model: FB 3 Year of construction: 2008 Travel X-Y-Z: 300 x 200 x350 Table size: 600 x 200mm Tool holder: SK 40 Spindle speed up to: 2800 rpm. Feed range: 850 - 550 rpm. Rapid traverse: 1200 rpm. Table load: 50 kg. Equipment/Accessories: Digital display made by Heidenhain Rigid angle table

spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2000 mm z-axis: 1250 mm w-axis: 800 mm b-axis: 360 ° output: 85 KVA table-size: 1800x1800 mm table load: 12 t spindle taper ISO: 50 table rotation: 360x0,0001 ° spindle motor: 37 kW spindle turning speed range: 1500 U/min feed range: 4-8000 mm/min electrics - voltage/frequency: 400 / 50 V/Hz weight of the machine ca.: 35 t dimensions of the machine ca.: 7x7x6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinally milling boring machine 66K25F4-03 The machine is designed for complex processing of parts made of ferrous and non-ferrous metals by milling, drilling and boring in single, small-scale and mass production Table - 2500x8000mm Machine dimensions - 8260x22100x8370 Weight - 127 tons CNC Machine accuracy class according to GOST 8-82 (N, P, V, A, C) - N The length of the working surface of the table, mm - 6000 Table width, mm - 2500 Spindle speed limits Min/Max, rpm. - 5 - 2000 Power, kW - 55

Tos W 100 A NC Controlled Table Type Boring Machine Machine is in good working condition Tools are included( 15 pieces BT 50 holder and more) 1650x1250 mm Turning table Heidenhain digital control

I offer those interested a used rotary table from the HP100 horizontal boring machine. The size of the table is 2200x2200 mm, weight 14,000 kg, rotation on a ruler + optically adjustable by 90°, linear measurement in the direction of table movement. Load capacity over 4,000 kg. Motor/manually controlled feed and rotation. Sliding guide in condition according to the photo. Fully functional. We are replacing it with a table with a rotary sensor. Available immediately. (it will be connected until 12/10/2022 and can be demonstrated)

Main axis diameter 90 mm Walrus Cone nº 5 (ISO 40) Longitudinal Column Travel 800 mm Vertical Movement 1.000 mm Automatic cross travel 1,000 mm Automatic longitudinal movement with lunette 1,000 mm 1.350 mm longitudinal automatic movement without lunette Bench width 900 mm Number of rotation speeds 18 Rotation speeds 10-1.000 rpm Table surface ` 1.000 x 1.200 mm Maximum weight allowed on the table is 4,000 kg Table rotation with 90º block function 360º Approximate weight 10 Tons Main engine power 15 HP Feather diameter 520 mm Plate travel 170 mm Speed Ranges 14 Maximum and minimum rotation speeds 10-335 rpm

The 1550 vertical lathe is a heavy vertical lathe that can be used to turn large parts. The machine was supplied to enterprises of the heavy, energy and nuclear industries, enterprises of the oil and gas industry, and was also exported. The 1550 lathe has proven itself to be reliable and unpretentious, not requiring special attention. The largest diameter of the installed product - 5000mm The greatest height of the installed product - 3200mm Faceplate diameter 5000mm The maximum weight of the processed product is 50t. H=8315mm H=12900mm L=7500mm Carousel machine model KU-281 Electric motors П112N125kw n=330-1000-2200rpm PNF45 N=6.5 kW; n=14-2800rpm AOS2-51-4 N=8.7 kW n=1335 rpm AOS2-61-4 N=14.5 kW n=1350 rpm AO2-31-4 N=2.2 kW n=14200 rpm AOS2-21-4 N=13kW n=1300 rpm AO2-22-2 N=2.2 kW n=2850 rpm AO62-4 N=10kw n=1400 rpm And also Angle head for machine KU-281 for dr ...

Machine double-sided row drilling machine 2 drill motors 1.8 kW with oil brake cylinder Stroke max. 130 mm with pneumatic reversing valve 21 spindles, spindle pitch 32 mm Drilling distance max. 640 mm (by moving the Bkhqffww workpiece max. 2656 mm) Portal passage 850 mm Air verbatcu at 5 atm approx. 11 l per cycle Suction nozzle 160 mm Machine dimensions approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Location: 97478 Hainert

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2050 mm z-travel: 1050 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 850 mm main drive motor: 45 kW table surface area: 1600x2000 mm Control: Heidenhain type: TNC 426 workpiece weight: 12500 kg : 720 mm radial face slide travel: 240 mm : total power requirement: 90 kW weight of the machine ca.: 31,1 t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gebr. Hole row drilling machine GANNOMAT Mentor 25 YOC 1999 Motor power: 1.5 kW Rated current: 3.3 A Compressed air connection required: 6 - 8 bar Drill bar with 25 spindles 32 mm pitch Drilling unit can be swivelled 90° Working width: 768 mm Portal passage: approx. 900 mm Drilling stroke: 100 mm Position adjustment drilling unit: 0 - 45 mm Position adjustment of hole row: 0 - 300 mm Clamping height (max. workpiece thickness): 100 mm Tool shank diameter: 10 mm Working height: 850 mm 2 aluminium stop profiles (150 cm each) Fully automatic pneumatic control with foot valve via control console: Clamping + Drilling + Relaxing electr. Intermittent operation pneumatic stop comb Angular Error Compensation System Program selector switch for automatic and leak-out function incl. various drill bits Dimensions: 1.15 x 1.03 x 1.25 m Weight: 420 kg Sold in ACTUAL c ...

Gebr. Knothole drilling machine RAPID 3 spindles 0.8 kW 380V (16A plug) wall-mounted Swivel Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

TOS W 75

BFT 90/3 SPINDEL 102 , ISO

Shipping within Germany 8 ,- insured

Key data: 130 , 3500 , 2000

CNC SIEMENS 840D X-axis (longitudinal) 3500 mm Y-axis (transverse) 2000 mm Z-axis (vertical) 1250 mm Table length 1800 mm Table width 1800 mm Maximum workpiece weight 12000 kg Spindle diameter 130 mm Maximum spindle speed 800 rpm Magazzino utensili 52 posti Spindle motor 37 kW Year of revision 2005 ------------------- Length x width x height 7200 × 7800 × 4900mm Weight 32000 kg

Key data: 1080 mm, 710 mm, 710 mm

With MILL PLUS iT path control Year of construction: 2005 Travels: X 1080 Y 710 Z 710 Speed range: 0 – 12,000 rpm Infinitely variable (SK 40) With the following accessories: Rigid angle table 1500mm x 800 mm clamping surface NC – Rotary table integrated in rigid table 0 800 mm Controlled swivel milling head (B axis) 3 D touch probe Vertical tool changer with 32 magazine positions (SK 40) IKZ 40 bar Rotoclear Mode 3 + 4 Full protection cabin with sliding doors and interior lighting Electronic handwheel Coolant device, Chip sweeping gun Conveyor Oil mist extraction Integrated screw conveyor , step grate , transport device 3 Height-Adjustable Machine Shoes Operating instructions

Key data: 750 mm, 600 mm, 520 mm

CNC universal milling machine DECKEL MAHO DMU 70 NEW DMG Design With track control Heidenhain iTNC 530 Year of construction: 2013 Travel : X 750 Y 600 Z 520 Speed range : 20 – 14,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Swivel rotary table for 5-axis simultaneous machining Ø 800 mm x 620 mm Electronic handwheel 3 D Probe Heidenhain Mode 3 + 4 Vertical tool changer with 30 magazine positions ( HSK 63 ) Sealing Air for Linear Measuring System Conveyor IKZ 40 bar Rotoclear Chip Sweeping Gun 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE HAS ONLY 3218 PROGRAM RUNNING HOURS THE MACHINE IS IN VERY GOOD MINT CONDITION

CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 60 T With MILL PLUS iT path control Year of construction: 2002 Travels: X 630 Y 560 Z 560 Speed range: 0 – 12,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1000 mm x 600 mm clamping surface 3 D touch probe Electronic handwheel Mode 3 + 4 Vertical tool changer with 24 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting IKZ 40 bar Integrated screw conveyor Rotoclear Chip rinsing gun Coolant system 3-Piece Height-Adjustable Machine Shoes Spindle Oil Cooler Transport device Operating instructions

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

CNC universal tool milling machine MAHO MH 500 W 4 With path control Philips CNC 432 Year of construction: 1990 Travel: X 500 Y 380 Z 350 Speed range: 20 – 5000 rpm infinitely variable With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Splash protection booth Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Triade Turned Drilling Machine Number of spindles: 3 Spindle system: Rights 3kw Left 3kw Side 0.75kw Pneumatic control Pneumatic Component Clamp

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Inv. Num. : 7248 Type: BKoE 400x630 Producer: VEB Mikromat Generated:- Parameters: Work table length: 630 mm Work table width: 400 mm Machine weight: 2300 kg

Specifications: Tool holder: MK 4 Drilling capacity: 40 mm Speed range: 56 - 1250 1/min Spindle stroke: 240 mm Feeds: 0.06 - 0.84 mm/rev Table size: 1040 x 380 mm Projection: 360 mm Column diameter: 240 mm Motor power: 6.5 kW Connection: 400 V Weight, approx.: 2300 kg Dimensions (WxDxH), approx.: 1260 x 1806 x 2820 mm Equipment: - Feed device - Drilling depth stop - Coolant foot - Emergency stop push button

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Morse 6

Condition: Very good condition