136,842 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 1494; Engine: Baudouin 4M10G110/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger., Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 120
; Gross weight [kg]: 1055; Engine: Baudouin 4M06G55/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A 5P; Water Tank Volume [l]: 87
; Gross weight [kg]: 922; Engine: Baudouin 4M06G44/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 785; Engine: Baudouin 4M06G25/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including : sockets 2x 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T
Metal Band Saw manufactured in 2014. This JAESPA Classic 423 DGH features a heavy steel construction and a low-vibration grey cast iron saw band table. It includes an NC control system with a 9-inch colour touchscreen for cutting program management and automatic positioning for mitre cuts. If you are looking to get high-quality cutting capabilities, consider the JAESPA Classic 423 DGH machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.
Steinheil KONTUR 408-2/D optoelectronic contour and shaft measuring system High-precision optoelectronic contour and shaft measuring system Steinheil KONTUR 408-2/D with high-quality Jenoptik optics The system is used for contactless, high-precision and fast measurement of rotationally symmetrical components (e.g. shafts, camshafts, turned parts) The device scans the measuring object without contact according to the shadow image principle. Rotational measurements are recorded with up to 1440 measuring points on the circumference per measuring point. The evaluation and quality control is carried out directly via an integrated SPC software (Statistical Process Control) based on Windows NT with clear tolerance bars and diagrams The system is housed in a closed aluminium profile housing with a transparent protective structure and is protected by professional safety light curtains ...
1 CNC turning and milling center Make: Heyligenstaedt Model: Hn35U/4000 Flex Year of construction: 1994 Control: CNC Siemens 840T Technical data: Working Range: - Turning length: 4000 mm - Circumferential diameter over bed: 890 mm Main Drive: - Power at 100% ED: 50 kW - Power at 50% ED: 69 kW Main spindle: - Spindle diameter in the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Form A DIN55026 Gr15 - Speed range: 1 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min Tool carrier system: - Tool interface: Capto C8 - Y-axis linear range of motion: +/- 130 mm - X-axis linear range of motion: 490 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140mm - Axial force min/max: 16000/2500 N - Inner cone quill: MK 5
On offer is a used, functional 40-foot refrigerated container from the manufacturer NARU. Technical data Manufacturer: NARU Model No.: 45R1 Type: IAAA-S-010 Year of Make: 2008 Dimensions: length 12.3 meters, width 2.44 meters, height 2.90 meters Volume: 67.36 m3 The container is currently at our customer's site near Magdeburg and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Likewise, any professional dismantling and loading of the asset would be the responsibility of the buyer. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The buyer must also dismantle the assets professionally. ...
Suvamatic draadkabel 400mm Draadkabel 400mm voor gewichtsvermindering
Case Rounding Machine Hunkeler BDR 40 (4344/1) Buchdeckenrundemaschine - Case Rounding Machine Hunkeler BDR 40 (4344/1) --complete clean and painted-- Serial-No. 4344/1 Output 250 - 300 pcs/h Spine width 10 - 120mm Spine length up to 450mm
4 head Paper Drilling machine Josef Foellmer IRAM 400/445 4 Kopf Bohrmaschine / 4 head Paper Drilling machine Josef Foellmer IRAM 400/445 Serial-No. 2190
Heftkopf / Stitching Head Müller Martini HK 75 0881.4052 Stitching Head Müller Martini HK 75 0881.4052
This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details.
Hydraulic press brake Make: Steiner Type: 25/40c Weight: approx. 26 tons. Year of Make: 1984 Technical data: -Compressive force: 2600 KN = 260 tons. -Edge length: 4050 mm -Stand passage: 3050 mm -Table width: 300 mm -Table height: 850 mm -Projection: 300 mm with controlled rear stop with wiring diagram – hydraulics with wiring diagram – electrics Die length: 4050 mm Bending bar: 4050 mm in different lengths Stroke: 240 mm -Drive power: 22 kW -Hydraulic cylinder: Ø 240 mm Press brake is not used much, but is fully functional and in operation -optically good condition- -technich good condition- Hydraulic press brake with CNC control -Make: Cybelec - Type: PC-80/800 -was installed in 2005 -Control is fully functional and in operation no guarantee, no return, no warranty Machine is still in commercial use and can be view ...
- Only 4630 Cutting hours - Automatic door - 40 CAPTCO C6-Tool magazin - Robot interface - 5 Axis simulteneous package - Sub spindel with C-Axis and 0,0001 Degree - Internal Grundfos 15 Bar coolant - Chip conveyor - Optional tooling package with 40 holders
This 6-axis ABB IRB 4600-40/2.55 was manufactured in 2017. It features a payload capacity of 40 kg and a maximum reach of 2,550 mm. With a net weight of 435 kg, this robot arm is designed for versatile applications. If you are looking to get high-quality automation capabilities, consider the ABB IRB 4600-40/2.55 robot arm we have for sale. Contact us for further details.
Two Optitek mould carriers with a control unit in the middle are offered. Opening width min./max.: 600mm/800mm, operating pressure: 6bar, hydraulic pressure: 50bar-200bar, max. clamping force at 200bar: approx. 779.8kN, max. opening force at 200bar: approx. 978.3kN, power supply: 400V/32A. Dimensions X/Y/Z: approx. 2500mm/2050mm/2799mm. The mold carrier is used for handling PU foaming molds. Documentation available. Inspection possible by arrangement.
Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg
This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VP 4SS vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details.
Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.
Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details.
This 3-axis Matsuura H.Plus 405 was manufactured in 2005. It features a pallet working surface of 500 x 500 mm and a maximum load capacity of 400 kg. The machine offers an impressive X, Y, and Z-axis travel of 600 mm each, along with a spindle speed range of 40 - 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matsuura H.Plus 405 horizontal machining centre we have for sale. Contact us for further details.
This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details.
This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15 touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details.
Submersible pump for industrial water, cooling emulsions, cooling and cutting oils.
Control cabinet with frequency converter and line filter
Submersible pump for industrial water, cooling emulsions, cooling and cutting oils.
THREE-AXIS HYDRAULIC POSITIONER Designed to carry out assembly, welding, adjustment and assembly operations in optimal safety conditions. The innovative features of these positioners, truly unique in their nature, offer the possibility of carrying out the following operations: - Continuous and bidirectional rotation - Tilt of the plate - Lifting the plate The rotation is operated by a geared motor device with a slewing ring. The lifting and tilting movement is carried out by means of hydraulic cylinders. The infinite working positions offered by the equipment mean that the operator can work in a safe and ergonomic position, significantly reducing working time and avoiding dependence on lifting aids. TECHNICAL CHARACTERISTICS: MODEL PV-4500 Maximum capacity (Kg) 4500 Motor power (kw) 5.5 + 0.5 Table dimensions: E (mm) Ø 719 Table Tilt β (degree) 0-92 Table ...
This 4-axis Gildemeister CTX -400 twin was manufactured in 2002. It features a robust turn-mill centre design, ideal for complex machining tasks. The machine is equipped with a chip conveyor system for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister CTX -400 twin turn-mill centre we have for sale. Contact us for further details.
This 3-axis Gildemeister CTX 400E was manufactured in 1998. It features an X-axis travel of 220 mm and a Z-axis travel of 635 mm. The machine is equipped with driven tools and a counter-spindle for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400E horizontal turning machine we have for sale. Contact us for further details.
Technical specifications: Data format: TIFF or LEN Maximum supported plate size: 1200 × 900 × 1.14 mm Imaging resolution: 2000–4000 ppi Optics: R Optics Maximum screen ruling: 200 lpi Tonal range: 1–99% Optics configuration: Optics 15 Productivity: 1.5 m²/h Dimensions & Weight: Width: 2090 mm Depth: 1168 mm Height: 1223 mm Weight: approx.1500 kg Electrical Data: Power supply: 1/N/PE, 220–240 V AC Frequency: 50/60 Hz Power consumption: 2.6 kW Building fuse: 16 A Residual current protection: >30 mA Grounding required Included Equipment: • Exhaust system • Vacuum pump • Compressor • Monitor • Keyboard • Mouse • Built-in software
; Power [PS]: 48; Gross weight [kg]: 1000; Engine: Yanmar 4TNV98CT-44G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 120
; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
maximum number of results exceeded
please refine your search
