circular saw machine used for sale

Weibert FO-3 Sliding table saw Format sliding table: 1600mm Motor power: 400V 3 KW 400V Cutting height: 103mm Saw blade: swivelling, D= 315mm with cut-to-length stop cpl. WJ-110100 Special price: net 3353,-€ with VAT 3990,-€

Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - wi ...

WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

ORDER NO. 6905 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 315mm - max cutting height 80mm - main dial adjustable up / down + angle - spindle diameter 30mm - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1050mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring disc electrically adjustable up / down - scoring motor 0,75kW - main engine 4kW - diameter of extraction connection 120mm, 50mm - table top dimensions 1230x730mm - table top dimension with extension and extension 1780x1230mm - shield cover - dimensions length / width / height 3030x3120x1170mm - weight 946kg – German production – with undercutter – unpainted – used saw, very good condition Net price: 23900 PLN Net price: 5371 EUR depending on the p ...

CATALOGUE NO. 7015 TECHNICAL SPECIFICATIONS - max diameter of the main disc with undercutter 350mm - max cutting height 100mm - main dial adjustable up / down - spindle diameter 30mm - spindle locking - with format trolley - cutting length on the trolley 2800mm - cutting width at the guide 1030mm - with sidecar - with undercutting machine - max diameter of the scoring machine 100mm - spindle diameter 22mm - scoring motor 0,75kW - main motor 5,5kW - 4 types of rotation speeds 3000, 4000, 5000, 6000, rpm - diameter of extraction connection 120mm, 60mm - table top dimensions 1220x730mm - table top dimension with widening 1220x1150mm - shield cover - dimensions length / width / height 2880x2800x1100mm, - weight 961kg – German production – unpainted – used saw, very good condition Net price: 16900 PLN Net price: 3798 EUR depending on the price 4.45 EU ...

SPECIFICATIONS: Sliding carriage: 360 x 3200 mm Saw blade: Ø 350 mm Scoring: Ø 100 mm Installed power: 5.5 Kw Cutting width of the parallel guide: 1300 mm

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg

Scoring circular saw blade, scoring circular saw blades -two-part, adjustable: 120 x 2.8-3.6 mm -for: pre-scoring panel materials, laminates, ... -Carbide tipped -Weight: 0.3 kg

Circular saw motor, electric motor with brake PERSKE Type: KS 80.12-2 BR ( KS80.12-2BR ) 4,4 kW 2830 rpm 400 V IP 54 Shaft diameter: Ø 30 / 60 mm Disc diameter: Ø 160 mm Flange diameter: Ø 215 mm Matching saw blade WZ252 ! used, tested ! Dimensions: 465 x 330 x 260 mm

Circular saw shaft PAGUS shaft diameter Ø 25 mm with adapter Ø 30 mm disc diameter Ø 84 mm Dimensions: 350 x 135 x 85 mm

Circular saw shaft pulleys Ø 79 mm Ø 63 mm Ø 48 mm Dimensions: 30x20x28 cm weight 22kg

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular saw shaft PAGUS shaft diameter: Ø 20 mm diameter V-belt pulley: Ø 68 mm Number of grooves: 2 groove width: 12 mm base plate: 220 x 130 x 8 mm hole spacing: 90 / 160 mm 4x bore: Ø 12,5 mm used, tested !; Dimensions: 430 x 130 x 70 mm

Circular saw, mobile Kosora Dresden Type ZR Year: 1978 Saw blade diameter: max. Ø 260 mm Table surface: 660 x 500 mm Table height: 940 mm Table height adjustable, approx. 100 mm Speed: 810 / 2350 rpm 0,0,55 kW 220 / 380 V 3AC used, tested ! Dimensions: 600 x 700 x 1050 mm

Planer, dresser, planer with circular saw VEM, ELECTROPLATING LEIPZIG Planer: Type EH 125 max. planing width: 125 mm Working table: 620 x 125 mm Working height: 780 mm Circular saw: Type KS max. cutting fee: 35 mm max. saw blade diameter: Ø 200 mm work table: 330 x 240 mm Working height: 840 - 880 mm (adjustable) Motor: Type ES 160 0,45 kW 3000 rpm 220 V 1AC 50 Hz used, tested ! Dimensions 660 x 620 x 900 mm

Circular saw blade, segmental saw blade, carbide LEUCO 180x6.0/5,0x65 209010-80258445 2135179 Ø 180 mm 40 teeth Width of teeth: 6.0 mm saw blade thickness: 5.0 mm Bore: Ø 65 mm bolt circle: Ø 90 mm suitable motor: EM578 ! used, tested ! Dimensions: 180 x 180 x 10 mm ,

Circular saw blade, metal circular saw blade, cold circular saw blade, 2 pieces PAGUS HSS DM05 400 x 3.5 x 50 164376 Ø 360 mm 80 teeth width of teeth: 10.0 mm saw blade thickness: 3.5 mm bore: Ø 50 mm bolt circle: Ø 80 / 85 mm used, tested ! Dimensions ( packaging ): 400 x 400 x 20 mm ,

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw Altendorf TRK 45 Year of construction: 1986 S/N 86-9-209 checked in our workshop for normal operating condition Carriage length: 1350 mm Height and swivel adjustment manually with handwheel Motor power: 5.5kW Cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, Blade diameter max mm: 450 ( without scoring machine ) with scoring Automatic engine brake Weight approx. 1100 kg Technical specification subject to change + 2 additional saw blades

- technically efficient, ready to work – after full service - disc diameter: 350 mm

Max. saw blade diameter: 425 mm Infinitely adjustable saw blade feed 2 motor speeds Hydraulic material clamps horizontal and vertical with clamping pressure reduction Optional minimum quantity spraying or coolant pump

Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

saw blade diameter: 250 mm cutting diameter: 50 mm revolutions per minute: 27/54 U/min output: 1,5 kw dimensions: 1,4 x 0,75 x 1,3 m weight of the machine ca.: 0,6 kg Used automatic cold circular saw - 3m roller conveyor - man. lenght stop - Blade hole Ø 32 mm - coolant system - 16 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw Altendorf F 45 YOC 2011 Trolley length 3200 mm, double trolley Saw blade max Ø 500 mm Motor power: 5.5 kW Scoring unit 0.75 kW, 2 axes adjustable Electromotive height and swivel adjustment 0 - 46° for the main saw blade Cutting width at rip fence 1050 mm adjustable parallel and mitre stop Table extension 840 mm

Sliding table saw Felder K 540 S built in 2020 Format carriage length 2500 mm Engine/voltage 5.5 kW / 7.5 hp / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 900 mm electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Engine/voltage 5.5 kW / 7.5 hp / 400 V Speed 4000 rpm Cutting height max.110 mm Weight approx. 700 kg

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Special price: Options: Scoring unit with motor 0.75 kW WJ-800105 Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Saw motor 400 V / three-phase / 4.0 kW WJ-800109 Eccentric clamp WJ-500103 Format table L= 2743 mm WJ-800102

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Sliding table length 3300 mm - Cutting width 1250 mm, adjustable by handwheel - Cutting height and angle above hydr. Adjustable foot pedal - Control panel at eye level with digital display for cutting width, height and angle - Saw blade Ø 200-500 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt folding - Electrical: 400 V, 50 Hz, 3~, 13.0 A

Weibert WJ-K315-A Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° with motorized height adjustment and swivel of the sawing unit WJ-800100-A Options at extra cost: Mitre stop 900 mm WJ-400207 Suction pipe with hose WJ-400104 Eccentric clamp WJ-500103 Scoring unit with motor 0.75 kW

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

Key data: 230 mm

- Mitre cut: 90 -/+ degrees - Clamping range: 90 mm - Speed levels: 36 / 72 m/min - Saw blade diameter: 230 (max. 250) mm - Total power: 0.75 kW - Machine weight: 180 kg - Dimensions (W x D x H): 0.8 x 0.6 x 1.6 m - Condition: good Details Miter, automatic pneumatic clamping

- Table size: 560 x 520 mm - Working height: 920 mm - Total power: 1 kW - Machine weight: 120 kg - Dimensions (W x D x H): 0.72 x 0.53 x 1.04 m Details Circular saw for wood / plastic, table / cabinet made of aluminum profiles, under-table with door, stop / guide

Crosscut saw REMA DMDK-50B Cutting height max 160mm Cutting width max 585mm Motor power: 6kw Saw blade diameter 500mm Saw spindle diameter 30mm Saw speed 3000r.p.m Working feed speed 20m/min Diameter of extraction spigot: 1x 125mm, 1x 80mm CE Certified Year of production 2013 A set of work tables

Imet Record 315/350 - Cold Saw - Suitable for cutting metal profiles and solid materials up to 70 kg/mm² - Mitre cuts from 0 degrees to 45 degrees left and right - Quick-release double vise - HSS saw blade - Pedestal with storage cabinet Specification: Cutting Capacity - 0°round: 125 mm - Square: 110 mm - Rectangular: 160 x 90 mm Cutting capacity 45° left: - Round: 105 mm - Square: 90 mm - Rectangular: 80 x 100 mm Cutting capacity 45° right: - Round: 70 mm - Square: 65 mm - Rectangular: 60 x 70 mm Machine data: - Saw blade size: 350 / 32 mm - Saw blade speed: 30 / 60 rpm - Motor power: 1.8 / 2.5 kW - Coolant tank: 40 l - Machine dimensions WxHxD: 770 x 1900 x 1200 mm - Weight: approx. 210 kg

Key data: 600 mm, 230 mm

Stock number: 3831 ALUMINUM SHORTCUT SAW Manufacturer: TRONZADORAS MG, Type: TL 600-90 Machine NO.: 220309, Year of manufacture: 2022 Specifications: Large sawing capacity 230 mm Ø Large sawing capacity 210 x 210 mm 4-ct. Large blade diameter 600 mm Blade speeds 3000 rpm Accessories: Automatic feed. Pusher Autopos 6 Pinon 6000 mm max. 40kg/m Chip suction MG 570 4Kw Length: 1300 mm + 6700 mm, height: 1660 mm, width: 813 mm, weight: 450 kg

Used Carpentry Universal Circular Saw Tailor Type 2406 Top Cutting height: approx. 250 mm Turntable rotatable 180 degrees Swivel 90 degrees- 30 degrees Cutting width adjustment 0-650 mm Clamping cylinder right Roller conveyor left 3000 mm Very good condition Functionally tested Shipping available at an additional cost

Cutting width at width stop: 640 mm; Cutting depth: 120 mm; Height adjustment saw blade: lever; Saw blade swivel adjustment: lever; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Length ruler display: -; Saw blade diameter: 400mm; RPMs: 1; Motor power: 2.8 kW; Engine braking: yes, automatic; Suction port: 100mm; including boom set: yes; Machine length: 1350mm; Table extension: 1100mm; Machine width: 1180mm; Weight: 131kg; DESCRIPTION saw blade can be swivelled up to 45Â and rotated up to 90 inclination of the saw unit via hand lever and scale guidance of the saw unit for cross-cut cuts from bottom to top via a lever Suitable for creating throat and burr rafters as well as eaves and wedge planks Rip fence with scale Saw blade protection hood and working unit with suction connection 100 mm Tool bo ...

Equipment/Specifications: - Handwheel adjustment of the rip fence - Saw blade height/angle can be adjusted via foot pedal - Saw blade Ø max. 450 mm - Control panel at eye level with digital displays for saw blade height/angle, cutting width and speed display - Scoring unit - Motor power 5.5 kW

Crawler multi-rip saw RAIMANN K23 250/120 moving saw – after the technical inspection – Perfect condition – DTR documentation – movable disc with fixed sleeve TECHNICAL PARAMETERS: .max. cutting height 120 mm .max. cutting width 250 mm main motor 30 kW feed motor 1.1 kW feed speed from 5 – 50 m/min .max. blade diameter 350 mm sleeve diameter 80 mm shaft diameter 60 mm movable disc Min. material length 500 mm working table dimensions 800 mm x 1750 mm three rows of anti-ejection pawls feed adjustable on geared motor central lubrication Four pressure rollers from above dimensions of the machine (length/width/height): 185 / 150 / 220 cm weight 1850 kg

Aluminum circular saw, chop saw, glass bead saw, aluminum chop saw, metal chop saw, chop and miter saw -Processing: of flat, angle and solid material, tubes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Scmidt, aluminum metal circular saw with solid base frame -Saw blade: Ø 350 mm 1800/3600 rpm -Double miter: 45° -Cutting capacity-round: 90°/45°: Ø 120 | 115mm -Cutting capacity-Square 90°/45°: 200x88 | 150x80mm -Drive: 1.5/1.8 kW -Double clamping device: manual operation -Dimensions: 900/585/H1850 mm -Weight: 194 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Cold circular saw, metal circular saw, metal miter saw -max. saw blade: Ø 275 mm -with coolant device: -Saw blade speed: 30/60 rpm -Cutting area: 90° flat 100 x 75 mm -Cutting area: 45° flat 40 x 75 mm -swiveling: -Dimensions: 1455/875/H1590 mm -Weight: 224 kg

Cold circular saw, metal circular saw, metal miter saw -max. saw blade: Ø 315 mm -with coolant device: -Saw blade speed: 40/80 rpm -Cutting area: 90° flat 100 x 75 mm -Cutting area: 45° flat 40 x 75 mm -Burr-free cut: thanks to a double vice -swiveling: -Dimensions: 1030/560/H1700 mm -Weight: 222 kg

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg