circular saw machine used for sale

Description: Saw blade diameter: 300 mm Table dimensions: 470 x 450 mm weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 700 x 700 x 1,700 mm

Key data: 350 mm

Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication

Format and trimming circular saw model F 90 foot hydr. Stroke, cutting length 4200, year of manufacture 89

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4854 Type: TS 161/21 Producer: Elumatec Created: 2004 Parameters: Maximum saw speed: 3200 1/min Saw blade diameter: 280 mm Electrical connection: 230/400 V. 3~. 50 Hz Power output: 1.05 kW Machine dimensions: 650x750x1300 mm Machine weight:: 130 kg Accessories: Roller conveyor Two saws A Lesson Slices

Description: Machine number: 548 Operating voltage: 400 V Frequency: 50 Hz Saw blade diameter: up to 370 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,950 mm, weight approx.: 400 kg

Carriage 3m40 Main motor: 5.5 kW Speeds: 3000, 4000, 5000, 6000rpm Sawblade tilting: -45 ? / 90 ? motorized automatic Sawblade rise, fall and tilt motorised Motorized automatic right stopper 1m35 Cross fence for cutting up to 3m20 automatic motorized Max sawblade 450mm

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Coolant device - Material replenishment machine ( clamping arm can be folded away ) - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Aluminum cross-cut saw, aluminum circular saw, aluminum semi-automatic circular saw, cross-cut saw, aluminum metal circular saw, light metal circular saw, metal cutting machine -Manufacturer: KASTO, semi-automatic under-table miter saw machine with roller conveyor -Type: KASTOalu U 14 -Saw blade: Ø 400 mm, 2,800 rpm -Saw feed: Hydropneumatic, infinitely adjustable saw feed with rapid return -Swivel range: 180° infinitely adjustable miter device -Cutting area 90°: 200x80 mm / 125x125 mm / 140 mm -Cutting area 45°: 140x80 mm / 110x110 mm / 130 mm -Coolant device: minimum quantity lubrication system -Drive: 1.8 kW -Clamping device: Two vertical and two horizontal clamping elements -Roller conveyor: 3000/520/H950 mm / 2000/470/H950 mm -Dimension saw: 700/1100/H1370 mm -Total weight: 298 kg

: 190 mm work piece - max.: 120 mm saw diameter: 370 mm turning speeds: min. 18 U/min turning speeds: max. 36 U/min total power requirement: 2,4 kW weight of the machine ca.: 0,4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optymalizerka Metal Technika OWD 1600 - produkcji Polskiej - rok produkcji 2017 PARAMETRY TECHNICZNE: - szerokość cięcia 250 mm - wysokość cięcia 120 mm - Wydajność Od 3 200 do 8 150 mb /8 h - stół sortujący z 5-ma wybijakami - Elektronika Sterownik z wyświetlaczem dotykowym kolorowym „MITSHUBISHI” - Funkcje - pełna optymalizacja 30 wymiarów w dwóch klasach jakości, - tworzenie programów cięcia dla różnych klientów, - ciecie w miejscu zaznaczenia kredką fluoroscencyjną, - obcinanie marginesu (początek i koniec materiału wejściowego) - cięcie pakietami (kilka elementów na raz) - liczniki metrów, total, zmiany, operatora, miesięczny, - dokładność cięcia ±0,2 mm - Silnik 5,5 KW (piła Ø500 – 140z) - Szerokość mat. wejściowego 12 - 250 mm max. szer/wys ( 250 / 50 mm) - Wysokość mat. wejściowego 12 - 120 mm max. wys/sze ...

Key data: 45 °, 3200 mm, 1200 mm

Used sliding table saw Int. Art. Ref. m3527 Manufacturer: LAZZARI Type JUNO 3200 Year of construction 2000 CE With scoring machine Saw blade can be swivelled up to 45° Motor power 5.5 kW Speeds 2,800 and 4,000 rpm. Carriage length 3.20 m Weight approx. 750 kg Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shi ...

Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vice 205 mm - Cutting range - with saw blade diameter 350 mm - at 90° approx. 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° approx. 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 17 + 34 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Specifications: - Saw blade diameter up to max. 325 mm - Mitre adjustable left + right up to 30 ° - Cutting range at 90° round + square 100 mm - Rectangle 165 x 85 mm - at 45° round + square 100 mm - at 30° round + square 80 mm - Cutting speeds 22 + 44 m/min - Micro spray coolant device - Pneumatic connection 6 bar - Drive 400 V / 3.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 380 kg

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds + 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Hydr . Metal tension - Coolant device - Feed – discharge roller conveyor each approx. 3000 mm - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Key data: 300 mm

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts

Key data: 45 °, 3200 mm, 1300 mm

Saw blade swivel: 45 °, carriage length: 3200 mm, cutting width: 1300 mm, motor power: 5.5 kW, saw blade diameter: 450 mm, machine weight, approx. 1000 kg, scoring unit, motor brake, eletr. Dissimulation.

Vice for cold circular saw, saw vice -Vise: from a cold circular saw manufacturer FCB type OMP 06 -Dimensions: see photos -Dimensions: 700/200/H200 mm -Weight: 28kg

Description: Machine number 0746 , Table dimensions approx. 440 x 200 mm , saw blade diameter: 300 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,800 mm, turning speed range: 2000 / 4000 rpm

Description: Table approx. 670 x 500 mm saw blade diameter: 250 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 950 x 700 x 1,000 mm

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

Description: Saw blade diameter: 275 mm Cutting diameter: 90 mm Stroke: 120 mm Mitre cuts (on both sides): 90 - 30 ° Speed range: 40 / 80 rpm Operating voltage: 380 V Total power requirement: 1.4 kW weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,300 mm

Description: Saw blade diameter: 275 mm Cutting area (flat): 140 x 70 mm Cutting area (miter): 100 x 70 mm weight approx.: 268 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,500 mm

Description: Saw blade diameter: 400 mm Cutting range (round): 130 mm Cutting range (square): 120 mm Cutting area (flat): 315 x 40 mm U-profiles: 240 x 85 mm U-profiles: 45° 180 x 70 mm Cutting speed: 13 / 25 m/min Saw blade feed speed: 10 - 1200 mm Rapid return of the saw blade: 1500 mm/min Drive power: 3.2 / 4.1 kW Including: NC control, automatic feed weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,000 x 1,300 mm

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. sliding table saw FORMAT4 Kappa 400 x-motion S/n 605.09.011.16 Year of construction 2016 Manufacturer: Felder Austria Cutting length 2800mm X-Roll sliding table ( 10 years warranty ) Cutting width 1200mm Boom table 1500 mm with cut-to-length fence 3200 mm Cut-to-length fence 3200 mm, swivel 90°–45°, 2 stop jaws Control x-motion CNC engine control with LCD screen 5.7" (145 mm) in overhead control panel Positioning control for saw blade height Positioning control for saw blade angles Automatic cutting height correction when panning Circular saw blade speed indicator Positioning control for rip fence w ...

Sliding Table Saw Sizing Saw Make Altendorf Type: F 90 Machine No. 73-4-144 Year of construction: 1973 Sliding carriage length 3000 mm Motor power 5.5 kW Extraction hood from above With scoring machine Cutting width to the right of the saw blade 800 mm max. saw blade diameter without splitting wedge, without scoring 500 mm Maximum cutting height 165 mm Maximum saw blade diameter with splitting wedge 400 mm Information on the cutting height for saw blade diameter Saw blade diameter 250 mm Cutting height 0 - 55 mm Saw blade diameter 300 mm Cutting height 0 - 80 mm Saw blade diameter 350 mm Cutting height 25 - 105 mm Saw blade diameter 400 mm Cutting height 50 - 130 mm Saw blade bore 30 mm 4 speeds adjustable via straps Suction connection diameter approx. 80 mm and 120 mm Saw blade not swivel Weight with pallet 815 kg Dimensions 3000 mm x 3000 mm x H 1500 mm ...

Key data: 225 mm, 70 mm

Machine Type: Metal Circular Sawing Machine Manufacturer: WEIDMANN Model: EW 20 Condition: good Offer Type: Used Machine Specifications: Cutting area: Ø 70 mm Blade diameter: 225 mm Drive type: el./mech. Drive: 400 V 0.37 / 0.5 kW Remark: material stop, 2 spare sheets, 2 speeds Weight: 50 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Altendorf C90 Compact Sliding table saw Sliding table 1.6m Boom arm Upper Protective Hood Cutting width 800mm Motor 4kW 400V 50Hz

Circular sawing machine. unfortunately no technical data.

Planers - saws - milling machines - combination machines - accessories ! Price example : Basic 1600 Pro/ 400V. Format table 2600x270, saw blade slide. 315mm, max. cutting height: 100mm, 45° 80mm, new : 3400,- net.

Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,000 mm, weight approx.: 400 kg

Key data: 350 mm

Plate Saw for Iron Plates Saw blade dia. 350mm, stroke: approx. 500mm, mitre and swivel possible To be visited under electricity

Key data: 750 mm, 220 mm

Cutting area: dia. 220mm, U/I beam : 400 x 150 , feed rate: 0- 500mm/min , drive motor: 5hp, 1700kg, sgt. Condition.

Key data: 45 °, 2800 mm, 1200 mm

3 axis control with boom with digital display for inclination Sled with warranty Remaining warranty 4 years

Description: saw blade dimensions: 150 x 19 x 1,8 mm , table dimensions: 480 x 400 mm , weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 500 x 450 x 800 mm

Description: Serial number: 3603M03400 Nominal speed: 5000 rpm Nominal power: 1400 W Table dimensions: approx. 640 x 600 mm weight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 500 mm

Description: Table dimensions: approx. 675 x 500 mm Speed range: 90 - 3000 rpm Mobile weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 750 x 1,100 mm

Description: Fabrication number: 243 Table dimensions: approx. 560 x 535 mm Stop: 0 - 400 mm Work table can be swiveled weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,100 mm

Description: Serial number: 0603331003 Nominal speed: 5200 rpm Blade diameter: 190 mm In case With operating instructions weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 410 x 290 x 320 mm

Description: Machine number: 99-58009 Power: 1.8 kW Saw blade diameter: 250 mm Suitable for mitre cuts Max. clamping width: approx. 90 mm weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 800 x 660 x 1,450 mm

Description: - Serial number: 10.002PK - Table size: 710 x 900 mm - Saw blade diameter: 250 mm max - Saw blade bore: 20 mm - Motor speed: 2800 rpm - Saw shaft speed: 3800 rpm - Cutting height 90°/45°: 82/55 mm - Motor power: 3,1 kW weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 950 mm

cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 380 V stroke: . mm : . square: 1200-100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hole circular saw set WÜRTH, incomplete

Description: Machine number: 2867/1119 Table dimensions: 850 x 700 mm Saw blade can be tilted 45° Incl. mobile extraction system from the manufacturer SPÄNEX Approx. Onsite Dimension. (l x w x h): 4,000 x 1,500 x 2,400 mm, weight approx.: 300 kg

Offer fields KF700SP from part-time carpentry in the best condition for sale. The sliding table saw is equipped with a swivelling (0-45°) electrically height-adjustable milling spindle as well as numerous special accessories. Used, Year of Construction 2008 Operating time according to hour meter 430 h (corresponds to 0.07 h/day) Motor power 4 kW direct start with brake and limit switch Circular saw scoring unit with its own motor drive Format sliding table, cutting length 2500 mm Optional extras: Lateral table extension Additional electrical switching point circular saw/scoring unit on the sliding table Electric height adjustment circular saw unit and milling spindle with Powerdrive Circular saw scoring unit with motor 1 hp Degree display of the circular saw/milling spindle swivel in the handwheel Rip fence with digital display Quick-change system for milling spindle  ...