circular saw machine used for sale

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Eisele PSU Hydraulics 470 Masch Nr 1141 Built 1986 RPM 6-48

Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004

Minimax SC4E Sliding table saw Motor 5kw 400V 50hz Suction nozzle diameter 120mm Suction nozzle. Saw blade protection 60mm Cutting width with parallel fence 900mm length width left 3200mm Trimming length: 2310mm Saw blade inclination 90-45° cutting height 90°: 100mm cutting height 45°: 63mm Saw blade diameter: 4000 1/min Weight approx. 454kg G&STÜ-5504524 Optional: Scorer and top protection hood

– year of production 1998 –optimization – cutting to the line – width measurement – possibility of cutting aluminum TECHNICAL PARAMETERS: .max. cutting length 4000 mm Min. element 200 mm .max. cutting height 100 mm .max. cutting width 260 mm disc diameter 500 mm engine power 9 kW feed speed max. 160 m/min acceleration 2 m/s2 optimization in relation to length and value pneumatic material pressure three ejectors drop tables rotary table total length 2000 cm transport dimensions (L/W/H) 1300 / 245 / 220 cm weight 3500 kg

– Italian production – year of manufacture 2009 – full optimization –DTR –CE TECHNICAL PARAMETERS: cutting width max. 260 mm cutting height max. 120 mm engine power 7,5 kW material length max. 4000 mm receiving table 3000 mm disc diameter 500 mm feed speed 60 m/min possibility to program 100 dimensions of cuts programming of 5 classes of wood automatic and semi-automatic operating mode total dimension (L/W/H) 930 / 150 / 170 cm

– after technical inspection – German production – year of manufacture 2005 TECHNICAL PARAMETERS: .max. length of cut material 4500 mm .max. width 360 mm .max. height 160 mm automatic length measurement optimization in 4 quality classes total power 13 kW disc motor power 7. 5 kW pneumatic side and top pressure disc diameter max. 500 mm OptiCom Assist control receiving conveyor 5600 mm two ejectors overall length 13 m printer for marking elements cutting accuracy +/- 0.5 mm transport dimensions (L/W/H) 600 / 240 / 190 cm weight ~ 1800 kg

– after technical inspection – year of manufacture 2004 – declaration of conformity, DTR – German production TECHNICAL PARAMETERS: min./max. element input length 800 / 3500 mm .max. input width of the element 200 mm min./max. element input thickness 12 / 80 mm type of hard/soft wood cutting to the line wood classification .max. feed speed 120 m/min acceleration 5 m/s saw diameter fi 500 mm saw bore diameter 30 mm number of spindle revolutions of the saw 4600 U/min duration of 1 cycle 0.7 - 1.2 sec driven transporter at the entrance and marking station with side tables for two marking belt conveyor total power 15 kW length measurement – fluorescent camera for 3 quality receiving station – conveyor belt total length 8300 mm connection diameter 80 and 120 mm OptiCom Direct control power supply 400 V / 50 Hz

: gebraucht : 1999 : 6173 : Deutschland : 11900 € : 1 : 500 mm : 2800 U/Min : Rund 180 mm, Quadratprofi : Rund 120 mm, Quadratprofi : 1100 mm : 1450 mm : 1350 mm : 490 kg hydropneumatic saw feed new HM saw blade pneumatic material clamping device vertical automatically opening protective cover discharge roller conveyor 450 mm with stop and measuring system roller 4.780x850x1.000 mm display E110, 1/10 mm pneumatic clamping handwheel locking in the operating area stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg

– Polish production – DTR, CE – year of manufacture 2011 TECHNICAL PARAMETERS: minimum length of material after formatting 800 mm maximum length of material after formatting 1600 mm maximum material width 480 mm maximum material thickness 145 mm disc diameter 500 mm smoothly adjustable feed 0-20 m/min main motor power 2 x 5,2 kW feed motor power 1.5 kW machine dimensions (L/W/H) 340 / 230 / 180 cm weight 2500 kg

Operating voltage: 400 volts, power: 4 kW, speed: maximum 6,000 rpm, saw blade diameter maximum: 400 mm, work table with 2 T-slots width: 2500 mm, adjustable with depth stop: 0 - 800 mm, with suction device Errors excepted!

Equipment: - Scoring saw unit - Miter stop - Trimming length 3300 mm - Cutting width 1100 mm, can be moved by hand, with digital display - Cutting height above hydr. Foot pedal adjustable - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrical: 380 V, 50 Hz, 3~, 13.0 A

Specifications: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - largest opening width of the vice 145 mm - Cutting range with saw blade diameter 300 mm - at 90° about 95 mm Flat 125 x 90 mm - at 45° about 95 mm flat 95 x 85 mm - miter adjustable left to 30° + right to 45° - Saw blade speeds 40 + 80 1/min - Drive 400 V / 1.6 / 2.1 kW - Coolant device - Discharge roller gear 3000 mm - Space requirement approx. W 600 x H 1700 x D 800 mm - Weight approx. 250 kg

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

Type SI 15 WF Dimension of sliding table 2700x2300mm Table travel 2600 mm Max. the length of the ruler by saw 900 mm Saw blade diameter 400 mm Blade tilt 0-45 deg Table size: 1150x630 mm Main spindle diameter 30 mm Main motor 11 kW 380 V Maximum clearance 140 mm Transport dimensions 2700 2700x1800x1200 mm Weight 820 kg Price 1200 Eur (EXW Jonava, Lithuania)

Saw blade diameter: 400 mm Connection: 400 V Equipment: - 2 sawing units - Pneumatic vice

saw blade diameter: 650 x 50 mm turning speeds: 3000 U/min : 230 x 230 mm : 400 x 100 mm capacity 90 degrees: round: 250 mm : 190 x 190 mm Capacity 45° rectangular: 260 x 100 mm : 230 mm cutting speed: 55 m/sec. work height max.: 970 mm total power requirement: 4,0 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 1400 x 820 x 1660 mm Description: Industrial aluminium sawing machine. The machines pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included The data for this ad was created with ModulMWS -  ...

Table saw

Circular saw Manufacturer: MEP Type: Tiger 350

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: C45-300E Economy New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 380 mm Grid carriage locking system with operation at the carriage end. Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable swivel guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 35 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up  ...

Saw blade diameter: 400 mm Sawing capacity: 130 mm round / 120 x 120 mm square Saw adjustment: 45º left/right Saw steps: 13/17/25 mtr. per min. Main engine power: 2.7 kW Country of origin: Germany Machine weight: 900 kg Machine LxWxH: 1080 x 900 x 1760 mm

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15+30+45+90 U/min total power requirement: 1,8/2,6 kW weight of the machine ca.: 0,41 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Circular saw with 45° swiveling saw blade Saw blade diameter mm: 400 Diameter of the scorer mm: 120 Length sliding carriage mm: 3000 cutting width mm: 1300 Drive power KW: 5,5 Engine brake Complete with: - 1 pneumatic stop - Digital control system

Dimter Opticut 302 Optimizer Cutting out errors and fixed lengths The machine after a comprehensive overhaul in 2019 Year of Build 2000

Key data: 520

Sensational DIMTER optimizer OPTICUT 200 ELIT Machine from the production line, Complete machine, to it we will give a set of inlet tables, as well as a complete outlet. Measuring station, everything included Machine not running. Connect electronically and pneumatically, run the program At the customer's request, we can arrange it for a fee. Machine after mechanical overhaul in our plant If you have any questions, feel free

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 3,800 mm Cutting width: 1,270 mm Scoring aggregate (saw blade Ø 120 mm) Saw blade-Ø max 400 mm Cutting height max. 130 mm Moro power 5.5 kW Speed 3,000 / 4,000 / 5,0000 rpm electr. adjustment of saw blade height, Saw blade swivel and cutting width Control in the machine body Length stop with digital displays Weight approx. 970 kg Technical data subject to actual equipment

SPECIFICATIONS: Sliding table saw with 45° swiveling saw blade Diameter saw blade mm: 400 Diameter of the scorer mm: 120 Length of carriage mm: 3800 cutting width mm: 1600 Motor power KW: 5,5 Motor with brake Complete with: - 01 pneumatic presser - Digital control panel - Duplex continuous inclined cutter 0°-90°

Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested

Martin T60Classic sliding table saw Brand Martin Type T60C M-No.: V465053 Control panel Touch screen integrated at eye level in the suction support 2-axis control (saw height, inclination, manual cutting width via handwheels, but with digital readout on touch screen) Main saw: ø400 mm, cutting height: 130 mm, saw swivelling: 0° - 45° Speed control: 4.000/4.800/6.000/ tpm Motor: 5.5 KW Trolley: 3,000 mm Cutting width: 1,250 mm mm Laying table: Galvanized steel with fixed-angle stops 0º, 22.5º, 30ºen 45º. Dimensions: 1,340 650 mm Long stop: 2,200 - 3,300 mm with 2 folding attachments and fine adjustment Suction: Top: ø100 mm, Bottom: ø120 mm weight: 1.400 KG Condition: fully functional tested

General: Power 1.5 kW 16 A Other equipment and accessories included: Coolant device 2 saw blades

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Altendorf F45 ELMO III sliding table saw Brand: Altendorf Type: F45 ELMO III Machine no.: 96-8-136 Specifications: Control panel control: LCD screen, eye level, swivel away Cutting width, cutting height, saw blade inclination Trolley: 4,300 mm (double trolley with hard room guides) Cutting width: 1300mm, NC electromotive adjustment of the parallel fence Main saw: ø200 - 500 mm, 5.5 KW, speed 3.000-6.000 0-46° and 0-200 mm electrical adjustment Scorer: None Laying table: extendable 700 mm Length stop: angle stop with fixed 90° position, 2 stop flaps, lengths up to 3500mm Condition: Maintained machine technically and functionally tested Availability: immediately Optional: DGA - Double Miter Stop Analog

T60C sliding table saw in CE equipment • Control 3.5" in control panel at eye level included • Handwheel for adjusting the parallel stop from operating position, digital display included • Cutting width 1,350 mm included Trimming table length 3.3 m Cutting width 1,350 mm "2-axis scoring unit, electric Scratch position left/right and scratch height can be positioned via control while the scoring saw is running, electronic display of the adjustment paths; automatic adjustment of the scoring system to each main saw blade; Blade change with ProLock; pneumatically liftable / lowered, separately from the main saw blade can be switched on / off; 0. ...

Inv. Num. : 6503 Type: ALU-U12 Producer: KASTO Generated: 2015 Parameters: Maximum sawing speed: 2800 1/min Spindle power: 1.5 kW Machine dimensions: 650 x 800 x 1300 mm Machine weight: 150 kg Equipment: Saw blade

Brand MARTIN Type T72A Comfort Control panel eye level integrated in the suction supports Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Parallelogramtic: Aluminium miter table, -46° to 46° digital display, angle-length calculation table Length stop: Aluminium 2,200 mm, extendable up to 3,200 mm with 2 punch stops and digital display Main saw: ø450 mm, cutting height: 170 mm, saw swivelling: 0° - 46° Speed control: 2000/2750/4000/5500 rpm Motor: 5.5 KW Scorer: ø120 mm, 3-axis electric adjustment Motor: 0.75 KW Trolley: 3,300 mm Cutting width: 1,250 mm Suction: Top: ø80 mm, Bottom: ø120 mm weight: 1.600 KG Condition: still to be cleaned, tested, etc.

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 2,500 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Brand Martin Type T71 Main saw: max. ø450 mm (excl. Voorrits), Zaaghoogte: 170 mm, Zaag schuinstelling: 0° - 46° Scoring saw Yes Speed control: 2.800/4.000/5.500 tpm Motor: 5.5 KW hem table 1,900 mm Cutting width: 1,250 mm Long stop: 2-point length stop 2,200 - 3,300 mm Auflegetisch: met vast aanslagen vooer hoekverstelling Suction: Top: ø80 mm, Bottom: ø140 mm weight: 1.200 KG Condition: Fully functional and tidy machine

Brand Martin Type T75PreX Year of construction: 2021 New exhibition MA7502050 sliding table saw T75 PreX with large screen 10.4" touchscreen T75P05-b "Option package 2, consisting of: Infinitely variable speed control 9.5 kW T7503-a Electromotive positioning of the parallel fence T7511-a Scoring system ""PreX"" 3-axis - scoring unit T7523-a" T7503-a engine power 9.5 kW (13 hp) S6-60%, with infinitely variable speed control for the main saw blade, adjustable from 2,000 - 6,000 rpm; modern, maintenance-free passive cooling of the inverter T7508/4-a: trolley: 3,300 mm T7509/3-a cutting width: 1350 mm T7511-a "Electromotive positioning of the parallel fence Measurement specification and digital dimension display in the control system; Ruler can be folded, position queried via sensor; complete in ...

Manufacturer: H&M HM-ZN 8000-R automatic miter and beam saw Type: ZN-8000 R Motor: 6 kW Saw blade: ø600 - ø700 mm Axle: ø30 Saw height: 250mm Angle adjustment: 0 dead 180° Tilt: 0 tot 45° Zenter line: 200mm Printer: 2 boven- en 2 zijdrukkers Feed table: 9500mm Export table: 6000mm Table castors: Incoming and outgoing conveyors are driven Feed: 55 m/min. Length stop rack with 0.4 m/s feed Repeatability: 0.1 - 1 mm (naar wens instelbaar)\ Noise: 81 dB Suction: ø200 mm weight 1350KG Powers: 380V, 3 Ph, 35A + 220 V, 16A

Omga T 2020 NC Optimizer Maximum element thickness 120mm Maximum element width 320mm Minimum element length 600mm Maximum feed speed 180m/min Saw motor power 5.5kw Feed motor power 7.5kw Maximum acceleration 15m/s Saw cutting cycle time 0.2-1sec Average number of cuts 80-90/min

Saw blade Ø: 370 mm Cutting range at 90° round: 120 mm Rectangle: 100 x 180 mm Mitre cutting range at 45° round: 105 mm Rectangle: 100 x 130 mm 2 saw blade speeds by pole-changing motor: 15 and 30 rpm Drive motor: 400 V, 1.5/2.2 kW Weight: 370 kg

Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake

SAC CS40 sliding table saw Year of construction: 2008 S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420 mm, Locking mechanism for easy plate loading in any position Steel sliding system Main saw mandrel (30 mm) 45° swivel Electric raising and lowering of the main sheet. Main motor 5.5 kW, self-braking motor Cutting speeds 2,600 - 4,000 and 5,600 rpm Saw blade diameter max. 400 mm Maximum cutting height 130 mm ( 90° ) 100 mm ( 45° ) Rip fence 1,500 mm Scoring saw motor 0.75 kW 120 mm (diameter scoring saw blade - 8,000 rpm scoring unit with external adjustment) Square length stop with stops, Extension table with mitre stop and sliding boom support. 400 V, 50 Hz Weight 820 kg CE, marked

Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900