circular saw cold used for sale

saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...

saw blade diameter: 350x 32 mm turning speeds: 3000 U/min : 115 x 115 mm : 160 x 90 mm capacity 90 degrees: round: 125 mm : 110 x 110 mm Capacity 45° rectangular: 75 x 45 mm : 120 mm Cutting height: 125 mm total power requirement: 1,5 kW weight of the machine ca.: 68 kg dimensions of the machine ca.: 780 x 480 x 850 mm Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area. The data for this ad was ...

saw blade diameter: 600 x 50 mm turning speeds: 3000 U/min : 175 x 175 mm : 300 x 90 mm capacity 90 degrees: round: 220 mm work height max.: 970 mm Cutting height: max. 220 mm total power requirement: 4,1 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2020 x 1510 x 975 mm Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

HewSaw SL250 Trio sawing line from year 2005 consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m. Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. - Top diameter: 100–420 mm - Maximum log diameter: 550 mm - Cant height in Chipper Canter: 75–410 mm - Cant width in Chipper Canter: 75–410 mm - Cant height in Rip Saw: 63–310 mm - Cant width in Rip Saw: 75–410 mm - Saw kerf: 4.2–5.0 mm B2d2yohbnx - Chip length: 20–30 mm Sawline: 1.Measuring conveyor 2.Log positioner 3.Chipper canter 4.Cant scanning conveyor 5.Cant saw 6.Separating conveyor EK2 7.Cant turner 8.Infeed conveyor 9.Rip saw waste handling conveyors electric and control system hydraulic system

Technical data Cut range: round 90° full: 25 mm Saw blade diameter: 100 mm Max. saw blade diameter: 100 mm Cut range: round max. tube: 25 mm Cut length:: 1 - 160 mm Saw blade size: central bore: 20 mm Max. automatic advance length: 500 mm Speeds: up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Power: 1.5 kW Machine´s weight about: 360 kg Overall dimensions machine: Length: 1300 mm Width: 650 mm Height: 1550 mm Various accessories: Automatic forward feed Hydraulic vice Material bearing lenght

SPECIFICATIONS: Table dimensions/height mm: 1140 x 670 x 900 Sliding carriage length mm: 3800 Cutting height with saw blade diameter Ø 400 mm a 90°-45°: mm 135-95 Saw blade inclination: 90° + 45° Post-forming Vorritzer Ø max saw blade chair: mm 125 Ø Suction connection: Ø 120 mm Ø max saw blade mm: 400 Engine power KW: 8

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg

Altendorf WA6 Format circular saw new Format sliding table: 2600mm Engine power: 400V 4 KW (5.5 hp) Saw blade: 315mm swivel: 90°-45° Pre-scoring unit: with engine 0.37 KW (0.5 HP) For wood, plastic and non-ferrous metal G&AL-WA6-2600 ASSEMBLED CHECKED AND MEASURED! SPECIAL PRICE Format sliding table:also in 1600mm SPECIAL PRICE Accessories: Saw blade pendulum protection (upper protection) for saw blade 350mm

Posten Circular saw motors: 4 electric motors ELEKTRA BECKUM for circular saws 2.8 / 2.2 KW, 3 x 400 volts, 2800 rpm, IP44, cos phi 0.88.

Heavy format saw KUSING ATLAS 3200 with manual control. Cast iron core with raising of the aggregates by dovetail guides. This core is indestructible and low-maintenance. Technical parameters: Maximum saw blade diameter: ø 450/30 mm ( ø 500/30mm ) Maximum diameter of the pre-cutting disc: ø 120/20 mm Power of the pre-cutting motor: 0.55 kW (0.75 hp) Speed of the pre-cutting disc: 8000 rpm Main motor power: 4 kW (can be 3 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 155 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the cast iron table: 1200 x 700 mm Aluminum formatting sable: 3200 × 385 mm Cutting length: 3200 mm Weight of the machine: 950 kg

Professional formatting saw for solid wood with inclination. Technical parameters: Maximum saw blade diameter: ø 400/30 mm Main motor power: 3 kW (can be 4 kW or 5.5 kW) Speed of the main saw blade: 4000 rpm Maximum cutting height: 140 mm Inclination of the saw unit: 0 - 45 ° Dimensions of the iron table: 800 x 550 mm Aluminum formatting sable: 1200 × 360 mm Cutting length: 1200 mm Weight of the machine: 400 kg Description of the machine: 1) Quality casting core 2) Hardened rod formatting table (Altendorf principle) 3) Large cutting height 4) High quality Italian motor with electromagnetic mechanical brake

Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication

Fast and efficient machine. The machine is a perfect solution especially for hardwood processors up to a maximum height of about 35 mm, who want to achieve maximum material yield and high work efficiency. Technical parameters: Power of the main motor: 2 x 3 kW or 2 x 4 kW Shaft extension possible: 120 mm Feed belt width: 400 mm Power of the feed motor: 0.55 kW Tool diameter: 300 mm Maximum material height : 35 mm ( change on request ) Minimum material length: on request Small compact cutting sawing machine. The machine is suitable for cutting material with low energy consumption. Individual parameters can be changed on request. KuSING has been manufacturing woodworking machines since 1991.

min. grindable saw blade diameter:16 mm max. grindable saw blade diameter:315 mm chip pocket:16 mm stroke rate grinding carriage:90-135-200 min. grinding wheel diameter:160 mm grinding spindle speed:2800 u. 5200 U/min feed rate pro saw blade rotation:0,05; 0,10; 0,15; 0,20 mm 100 % before loading warranty: none one used circular saw sharpener make WMW-Königsee, type SWSK 315, year of production

An indestructible machine for the toughest conditions. The machine is suitable for processing raw wood. The machine has no inclination. The saw blade is located directly on the motor. Technical parameters: Maximum saw blade diameter: ø 500/mm Power of the main motor: 5.5 kW Main speed of the saw blade: 2850 rpm Maximum cutting height: 85 mm (with 350 mm saw blade) Inclination of the saw unit: NO Dimensions of the iron table: 1050 × 600 mm Aluminium formatting table: 2000 × 360 mm / OPTION 3200 x 360 mm Formatting table for hardened rods (Altendorf principle) Cutting length: 2000 mm Weight of the machine: 450 kg Given the prices of new Chinese machines that cannot withstand the harsh conditions, this machine is the solution. Made in Slovakia in Europe

Machine for the processing of large-area composite panel materials With this machine you are able to process portrait panel semi-finished products that are otherwise difficult to process We offer you a technology that has already proven itself in practice and works. With this technique you can process semi-finished products up to a maximum height of 220 mm precisely and accurately The technical parameters are queried and measured as required.

saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m

Buyer is responsible for the disassembly

The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site.

Hydro-pneumatic aluminum circular saw Fabr. EMMEGI Type SCA 400 PMachine -No: 176667 Year 1997Technical specifications:Saw blade diameter: 400 mmSaw blade speed: 2800 rpm.Swivel range up to: 15 ° left / + 15 ° rightWith- Underframe- pneum. Workpiece clampingvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Dimensions basic machine approx. 3000x2000x2300mm.; Length of feed roller conveyor approximately 5200mm.

Aluminum underfloor circular saw make unknownTechnical specifications:Saw blade diameter: 400 mmCutting heightExternal dimensions L x W x H: 1050 x 930 x 1700 mmWeight: 342 kgWith- 2 pneumatic vertical clamps- protective hood- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Crosscut and miter circular saw make GRAULE type ZS 85 NYear of construction 1996Technical specifications:Saw blade diameter: 300 mmCross cuts: 380 x 85 mmMiter cuts: 265 x 85 / 380 x 60 mmSaw blade speed: 2800 rpm.Drive power: 2.2 kWPower connection: 220 V / 50 HzWeight: 75kgWith- tilting version- without baseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Crosscut and miter circular saw make GRAULE type ZS 135Technical specifications:Cutting width at 90°: 430 mmCutting width at 45°: 300 mmCutting height: 135 mmSaw blade size: 350 mmSaw blade speed: 3800 rpm.Drive power: 2.0 kWPower connection: 220VApprox. weight: 105 kgwith- saw bladeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum circular saw machine make KALTENBACH type TL 400Machine -No: 106451Miter circular saw machine for profiles made of light metal and plasticTechnical specifications:Saw blade diameter: 400 mmCutting height: 135 mmCutting speed: 4500m/min.Drive power: 3.0 kWWeight without base approx.: 210 kgwith- rotatable on base- Viceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum circular saw machine make KALTENBACH type TL 400Machine -No: 52606Miter circular saw machine for profiles made of light metal and plasticTechnical specifications:Saw blade diameter: 400 mmCutting height: 135 mmCutting speed: 4500m/min.Drive power: 3.0 kWWeight without base approx.: 210 kgwith- rotatable on base- Viceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum circular saw make KALTENBACH type SKL 350Machine -No: 12561Technical specifications:Cutting range: 90°round: 135mmsquare: 120 mmflat: 70 x 280 mmCutting range: 45°square: 105 mmflat: 55 x 210 mmSaw blade speeds: 2250/ 4500 m/minDrive power: 5/6 hpWeight: 650kgExternal dimensions approx.: 1200 x 1200 x 1500 mmwith- pneumatic material clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Equipped with emergency stop, with accessories angle/protractor adjustment

You are responsible for dismantling and transporting this lot. There are no tools available. Incl manifold

lot consisting of: Omga radial arm saw and Ferrock FM16 drill press