chocolate machine used for sale

Low and Duff 6T Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

Nielsen 750L Chocolate kettle 750L chocolate kettle, top mounted motor with agitation, variable speed, scrape surface, side bottom discharge, 3Ph

Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Stock # UG6363 Used chocolate enrober line by Chocoma (Denmark) with a belt width of 320 mm. The construction of the line is made of stainless steel, aluminum and painted mild steel. The line consist of: - chocolate enrober machine type 2MP32, belt speed adjustable in the range of 0,45 - 1,75 m/min, - cooling tunnel type C + CS, belt speed adjustable in the range of 0,0 – 3,0 m/min, - tempering machine / jacketed mixing tank type 2T.

Used chocolate tank made by Faspoma, capacity of 3500 L. New 1993. Tank with agitator, heating jacket, has 2.2 kW motor, 705 rpm, CPA 43 pump, control cabinet. Piping within the tanks and platform to the tanks. Very good condition. 3 pieces available.

Used chocolate coating machine type OB-1 with type TECHO-1 cooling tunnel. Technical data of the coating machine: - length 1400 mm - width 1300 mm - height 1900 mm - length of infeed conveyor 1430 mm - width of infeed conveyor 990 mm - height of entry conveyor 900 mm Technical data of the cooling tunnel: Overall dimensions: - max. length 13000 mm - max. width 1150 mm - max. height 1580 mm - belt width 850 mm - height of conveyor belt from the ground 920 mm Technical and operational parameters: - conveyor belt speed infinitely adjustable from 0.671 to 0.922/min, - Electricity requirement: conveyor belt drive 1.1 kW, fans in coolers 4 x 50 = 0.2kW, blower fan motor 0.55 kW, conveyor belt adjustment mech. motor 0.12 kW Freon condensing unit + compressor motor 4 kW - it is adapted to be supplied with R12 freon

Used chocolate mass melter by Spomasz Pleszew type CUA19. New 1996. Two-chamber melter, unused, jacket and heating grate, dimensions of one chamber 105 cm x 200 cm, electric heating system. Weight 1610 kg.

Glotter Metal Temperature control unit with chocolate pump and vibrator - Chocolate pump GM 950 - for pouring, filling or coating -Stainless steel - Vibrator EM 3045 - Tabletop appliance with drainer tray - With manual regulator - Temperature control unit with water bath heating - 20 to 50°C adjustable - Container with 15 liters - Ready to plug in Connection 220V, 1500 Watt Used machine cleaned More chocolate machines in stock!

Chocolate tanks chocolate kettle 200l chocolate kettle, stainless bowl and agitator, digital temp control, side bottom discharge, 3Ph

Macintyre 750Kg Chocolate kettle 2012, 750Kgs capacity chocolate kettle, hot water jacket with electric heating system, top mounted motor 1.5Kw with agitator, side bottom discharge, with wall mounted control panel, 3Ph

Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

Coating line BTI- E- 400/10000 Chocolate coating line consist of - Completely in V2A - Engine manufacturer: SEW Eurodrive - Control: Omron/Schneider -Blower - Scheierkasten - Internal heating - Interior heating steel - Inlet belt approx. 1 meter - Base and full cover possible - Floor pan with thermo sensor - Floor pan double-walled hot water heated - In bottom pan Motion agitator - Floor pan can be manually extended for cleaning - Chocolate pump, pump head in V2A - Double-walled pipes, hot water heated - Detail wave OPTION: For real chocolate ( with cocoa butter ) Version with external temperature control machine for an extra charge Cooling Tunnel Model: BTI 400/6000 - Width of the conveyor belt in the cooling tunnel: 400 mm - Width of mesh tape in the enrober: 375mm - Speed of conveyor belt: 0 - 7 m/min - (Speed is adjustable) - Cooling compressor power: 3 HP  ...

Type OSR275 Rotating feed rollers Working width: 275–285 mm Up to 14 nozzles Opening for larger moulds and trays Special wide nozzle strips for panels and bars Capacity up to 80 kg/h High flexibility for different filling masses Easy to clean Easy to use Also suitable for the production of solid chocolate products

GAMI DIVA12 Automatic chocolate tempering machine with a 12 kg bowl. Works continuously from melting to tempering, with precise temperature control and a stainless steel AISI304 agitator that keeps the chocolate evenly liquid. Equipped with a removable auger for easy cleaning, heated vibratory grate and adjustable dosing pedal. Production capacity up to 60 kg/h. Dimensions 440 × 690 × 1570 mm

GAMI T500 Chocolate Tempering Machine Professional automatic chocolate tempering machine with a 45kg stainless steel bowl and integrated agitator that keeps the chocolate liquid and homogeneous. Works continuously from melting to tempering, with precise temperature control via high-precision sensors and dedicated control board. Equipped with removable auger for quick cleaning, heated vibrating grate, adjustable chocolate flow, pedal to stop flow and automatic start timer. Production capacity up to 170 kg/h. Dimensions 680 × 900 × 1690 mm

Key features: Tank capacity: 300 kg Installed power: 4.0 kW (4.4 kW with screw conveyor) Standard voltage: 400 V – 50 Hz – three-phase (other voltages on request) Dimensions: 1000 × 1250 × 1600 mm The TS300C is a professional chocolate melting tank designed to melt and keep large quantities of chocolate liquid for continuous feeding of tempering and enrobing machines. It has a 300 kg stainless steel tank with an integrated agitator, which ensures a uniform consistency and constant flowability – both when feeding with chocolate drops and solid blocks. Heating is provided by a bain marie system, controlled by a thermoregulator that ensures stable temperatures and preserves the organoleptic properties of the chocolate. The tank can optionally be equipped with a chocolate transfer system with screw conveyor as well as heated double-walled stainless steel piping, allowing  ...

Technical data: Bowl capacity: 25 kg Production capacity: 90 kg/h Power: 3.5 kW | Voltage: 230/400 V – 50 Hz – 3 phases Dimensions: 570 × 740 × 1560 mm Heated vibration conveying for uniform chocolate processing Stop pedal for flow and timed dosing system Removable screw agitator for quick and thorough cleaning High-precision temperature control via sensors and control board Suitable for the production of two-component chocolate The GAMI Diva 25 2i combines high performance, reliability and user-friendly design, making it ideal for professional chocolate tempering and artisanal production.

Manufacturer : Prefamac Chocolate Tempering, Melting & Forming Machine Model : probably MUO 80 Year of construction : unknown electr. Values : 400 V 50 Hz 3Ph Capacity : ~80kg User capacity : Machine dimensions : approx. 1150 x 780 x 1600 (lxwxh in mm) Weight : approx. 120 kg Details : Stainless steel construction. Electrically heated and thermostat-controlled Swivel agitator installed in the tank With vibrating table AISI 304 stainless steel structure, mounted on a frame with castors Lifting wheel made of food-safe plastic Good used condition Application; Melting, tempering and pouring of chocolate, Coating of biscuits. We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged

Chocolate Enrobing Machine Dedy 220 Mesh belt width 220 mm Belt speed infinitely adjustable Working direction from left to right Stainless steel version Connection 220V Used machine as good as new & SAB tested with warranty + spare parts service

Chocolate enrobing plant, Fabr. Savy & Sife,Type XM2000

Cooling tunnel for chocolate enrobing machine, Sollich, type KS 820

Description Item # 7526 – DOUBLE TWIST WRAPPER for comfit pieces, chocolate creams and sweets with solid or soft filling Manufactured by NAGEMA Model EU7 up to 300 pieces per minute, With appropriate parts would be suitable for product sizes 20 to 60mms long x 13 to 27mms wide x 8 to 20mms high,

Description Item # 9365 - CHOCOLATE DEPOSITOR Manufactured by BOHNKE & LUCKAU Model BL SD-275 For the depositing of chocolate with inclusions into moulds Including : Jacketted Stainless Steel Infeed Hopper Including a Stirrer with fixed 19rpm speed, driven by geared motor Rotary Valve Housing & corresponding depositing plate dosing nozzles Warm Water Heating System Servo Driven Cam/Piston Movement 5-Pistons at 40mms diameter 80mms maximum stroke, 5mms minimum stroke Including a depositing plate configured for 100g bars (3 bars per mould, mould size 275 x 205 x 30 mm)

Description Item # 9366 - (4) CHOCOLATE TEMPERERS Manufactured by AASTED Model SuperNova Energy Type SNE 1000-P Year 2015 up to 1000Kgs per hour The P stands for pre-cryztilation zone, also called a Detempering zone/De-crystallization zone With an ALLEN BRADLEY Panelview Plus 1000 PLC control The SuperNova Energy model provides significant energy savings whilst enhancing the total quality of your chocolate The by-pass concept allows longer crystallization, which is one of the many benefits of the SuperNova Energy model 380v 50hz

Thank you for your interest in our machines, which we can offer you as follows: Manufacturer : Sollich Model : E2 Tempermeter electr. Values : 240 V 50 Hz Details : Top condition, fully functional We offer this device for sale " in existing condition " under exclusion of any warranty/defect claims or representations.

Description Item # 9372 - ONE SHOT CHOCOLATE MOULDING LINE Manufactured by MAZZETTI RENATO (Italy) Model Micro FX425 OS Year 2013 Still all set up on the factory floor, in production until end October 2026 The line consists of: One-Shot depositing head capable of producing solid chocolate bars, including bars with 2–4 mm solid inclusions at a ratio of 7–8%, as well as pralines and cream-filled chocolate bars A solid-ingredient dosing unit equipped with a vibration system and vacuum feeding A vibration section A cooling tower A mould-twisting section for product demoulding A mould-return and heating system, followed by the restart of the depositing process. The line operates with 250 moulds measuring 405 × 205 mm. Available mould plates: Plain chocolate bars or chocolate bars with inclusions – 90 g; Plain chocolate bars or chocolate bars with inclusions – 25 g; One-Shot chocolate ...

Description Item # 9385 - SEMI-AUTOMATIC CHOCOLATE MOULDING LINE Manufactured by SELMI mould size 275 x 175, Speed around 4-6 moulds per minute including: SELMI Loader 275, year 2018 including scraper and mould vibration SELMI TOP temperer, year 2008, SELMI TUN cooling tunnel, year 2017, with upper deck dropping on to return belt for additional 2-pass cooling belt width 320mm tunnel 10m long: (1m infeed; 3 x 270cm covered sections; 1m outfeed) including refrigeration system

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001