chip used for sale

S&F Screening Machine | Vibrating Screening Machine Type ASM-100 used (as good as new) Make: S&F GmbH Type: ASM-100 - #1 Year of construction: 2016 Condition: as good as new Screening capacity: approx. 5 - 10 m³/h (for cross-cut wood, wood chips and sawdust) Fractions: 2 Screen area: 1.0 m² per screen mesh size Screen decks: 1 piece Mesh size of sieve: - 1st screen deck: perforated sheet screen punched, D = 20 mm or by arrangement. Drive power: 1.1 kW L x W x H: 2,300 x 1,250 x 1,050 mm Design: ECO Line Machine weight: approx. 600 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Design of the material outlet according to customer requirements The screening machine has been checked, painted and is in a very good condition (as good as new) (see pictures). Vibrating screen was restored (flange bearings) and new vibrating elements were mou ...

Horizontal machining center with 2-fold changing table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Fabr. No. 34 Year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle Drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant device with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 ton. good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 ton. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg; used

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerType of Measuring system Direct measuring systemPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 900 KgCentre bore 50 mmTable surface 630 x 630 mmMotor ...

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

turning diameter: 330 mm turning length: 830 mm swing diameter over bed slide: 196 mm Swingdiameter in the bed bridge: 170 centre height: 165 mm centre distance: 830 mm Turning length in the bed bridge: 430 reus: 16 (70-2000) U/min tail stock: MK 3 quill stroke: 110 mm diameter of quill: 32 mm spindle taper: DIN ISO 702-2 Nr. 4 spindle bore: 38 mm spindle cone: MK 5 feed: längs 32 / 0,052 1,392 m/min feed: plan 3,2 / 0,014 0,38 m/min total power requirement: kW weight of the machine ca.: 0,52 t dimensions of the machine ca.: 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spi ...

Table length: 3500 mm Table width: 800 mm Longitudinal X: 3000 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 36   Positions APC: 0   CNC Brand: Siemens 5-axis CNC machine (VMC)MATEC - 30 HV SEMPUCO Roatry table Renishaw RMP 60 Renishaw RMI Integrated hydraulic connection for machine vices Working Hours 11.892 H Chip conveyor Filtration & Coolant system X - Travel:               3000mm Y - Travel:               800mm Z - Travel:               800mm A - Axis:                 - 105 to + 105° B - Axis:                 360000° Table Length:             3500mm Table Width:             ...

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWPre-setting Package CTX 450 ecolinePre-setting ...

Longitudinal X: 3000 mm Cross Y: 800 mm Vertical Z: 720 mm Positions ATC: 48   CNC Brand: Mazatrol 10800 spindle hours Renishaw OMP 60 3D Taster ikz 15 Bar Double chip conveyor Free from 09.2023 X - Travel:               3000mm Y - Travel:               800mm Z - Travel:               720mm A - Axis:                 360000° B - Axis:                 110° Table Length:             3500mm Table Width:              820mm Table load:               2500 Table  Ø:                 700mm Feed rate X-Axis:  ...

5 axes Bar passage from Ø51 20-tool magazine Turning diameter 540 mm Turning length 1000 mm X-axis travel 530 mm Z-axis travel 1065 mm Y-axis travel 70 mm 640MT control Indexed main spindle Spindle power 22 KW RPM 5000 Chip conveyor Mazak KM63 taper attachment Complete with chip conveyor, visible under power

Table length: 630 mm Table width: 500 mm Longitudinal X: 730 mm Cross Y: 850 mm Vertical Z: 560 mm Positions ATC: 80   Positions APC: 2   CNC Brand: Mazatrol Renishaw OMP 60 3D Taster ikz 15 Bar Double chip conveyor EUCHNER toolmanagment prepared Pallet changer 2 position Extended 80 Position ATC Synchronized threat cutting EIA Dynamic 5 Axis compensation Directl availebel X - Travel:               730mm Y - Travel:               850mm Z - Travel:               560mm A - Axis:                 -120 to +30° B - Axis:                 360000° Table Length:             630mm Table Width:             ...

Table length: 1300 mm Table width: 550 mm Longitudinal X: 1050 mm Cross Y: 510 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain Renishaw 3D measuring probe Chip conveyor double screw Heidenhain iTNC 530 Heidenhain HR 410 handwheel CE-Marked Free from 20.06.2023 X - Travel:    1050mm Y - Travel:    510mm Z - Travel:    510mm Table Length:  1300mm Table Width:   550mm Table load:    1200 Spindle Taper: 40ISO/Bt/Mk Speeds / ranges:12000Rpm ATC / revolver:30 Chip conveyor: Yes Coolantsystem: Yes Length:        2900mm Width:         2800mm Height:        2800mm Weight:        7100kg

Machine Details Stock-No. 1105-03853 Type of machine CNC Lathe Make MORI SEIKI Type NLX 2500/700 Year of manufacture 2016 Type of control CNC Storage location HAGUENAU Country of origin Japan Delivery time to be agreed Freight basis ex site Price Technical details turning diameter 356 mm turning length 705 mm control MORI SLIM LIN X-AXIS 260 mm Z-AXIS 795 mm power capacity - main spindle 18,5/15 kW Speed Mainspindle 3300 min/-1 Spindle Bore 91 mm spindle nose JIS A2-8 chuck Kitagawa B-212A8 mm max. chuck pressure 3.1 MPa number of toolpositions 12 pos. Shank diameter 50 mm Shank height for square tool 25 mm Turret change time 0.25 sec. tailstock 734 mm slide. of quill 80 mm rapid power traverse in X-and Z direction 30 m/min rapid travel tail stock 7 m/min total power requirement 27,6 kW Weight of the machine approx. 5.8 t dimensions of the machine app ...

Mario Carnaghi CNC Vertical Boring Mill FEATURES: Siemens 840DE SL CNC Control 12-Position Automatic Tool & Attachment Changer 40-Station Automatic Tool Magazine Hydrostatic Table Vertical Ram with Milling Spindle Vertical Milling & Drilling Attachment Right Angle Milling Attachment Universal Milling Attachment Through Spindle Coolant & Flood Coolant Dual Dive 108 HP (81 KW) Table Motors High Resolution Heidenhain Scales & Encoder Renishaw RMP 60 Probe Renishaw NC-4 Milling Tool Probe Full Machine & Operator Enclosure Chip Conveyor CAPACITY: Table Diameter 196.85" (5000mm) Turning Diameter .. 236.22" (6000mm) Maximum Turning Height 98.42" (2500mm) Maximum Stroke of Vertical Rams ... 59.05" (1500mm) Ram Cross Section . 13.77" x 13.77" (350x350mm) Cross Rail Travel . 47.24" (1200mm) Ram Saddle Travel, X-Axis . 175" (4445mm) Turning Tool .. Capto C8  ...

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm control: Siemens 840 D cross rail adjustment - vertical: 1500 mm max. ram stroke: 2000 mm ram head dimension: 300 x 300 mm faceplate turning speed range: 0,4 - 95 U/min main drive: 2 x 80 kW faceplate load max.: 80.000 kg Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation The data for this ad was created ...

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Number of sanding units: 2 st. sanding width: 190 mm Sanding height max.: 4-150 mm Hess Junior single wood sander --------------------------------- basic structure: Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated bracing for optimal vibration damping. Staggered grinding units with large dimensioned Belt drive drums for slip-free belt travel. Two-point suction for direct and airborne dust extraction with integrated blow-off device. grinding units in heavy steel plate construction as the basis for vibration-damped, quiet belt run. All guides as a ball linear set on hardened and polished waves. Lasting precision thanks to protection against dust and dirt of the sphere linear sets. Contact roller and sanding pad in a balanced ratio to the grinding belt grain load. The large dimensioned drive drums guarantee the full tr ...

x-travel: 2940 mm y-travel: 700 mm z-travel: 850 mm Control: Siemens 840 D total power requirement: 75 kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: m Technical specifications: Traverse X/Y/Z 2940 x 700 x 850 mm Pendulum stroke with vertical spindle left/right 1170/1170 mm Spindle speeds 30 - 4000 rpm. AC hollow shaft motor, power 45 kW at 40% ED Max. torque 286 Nm at 40% ED Tool holder SK 50 Equipment: CNC control Siemens 840 D Automatic CNC swivel head, B-axis under 2.5° directly programmable from X (-) 90° to X (+) 90° Locking via Hirth toothing Tapping without compensating chuck CNC rotary table Measuring system Heidenhain, direct linear Tool changer with 26 tool places Chip conveyor Coolant system with high-pressure pump and belt filter system Space requirements: Machine length 5800 mm + 1700 mm with chip conveyor Machine width 3300 mm plus control panel Ma ...

System includes (1) CNC Transfer Machine Gnutti DF-12, connected load: 120kW, weight: 22t (2) Rotary Transfer System Mako RL10 (3) Washing Machine Mako WM3 MZ3, washing pressure: 80bar (4) Chip Shredder ZVD 600-J with VRF 900/6600 filter system, screw pump KTS, VRF vacuum rotary filter, chip conveyor (5) 5x Industrial Robots ABB, system length: 10,858mm, system width: 9798mm, with documentation, on-site inspection is possible.

Turning diameter: 300 mm Turning length: 195 mm Turret positions: 10 CNC Brand: _Unknown / Other CNC Model: MSG-805 WTO Live tool holders Collet device Tool eye Chip conveyor Automatic door   Max. turning Ø: 300mm X-Axis:         195mm Z-Axis:         370mm Spindle bore:   73mm Speedrange:     3500Rpm Spindle power:  11kW ATC / revolver: 10 Speed live tools:4500Rpm Chip conveyor:  Yes Length:         1550mm Width:          1680mm Height:         1814mm Weight:         3300kg  

turning diameter: 324 mm turning length: 600 mm control: SINUMERIK 840D ShopTurn bar diameter: 65 mm swing diameter: 680 mm travel -x axis: 260 mm travel -z axis: 635 mm spindle speed:: 5000 1/min spindle bore: 79 mm C-Axis: 0,025 ° turret head: 12 Pos. / VDI 40 Driven Tools: 12 Pos. 4.500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 45 m/min taper in tailstock-quill: MK 5 tailstock travel: 580 mm drive capacity - spindle motor: 25 kW voltage: 400 V total power requirement: 50 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,50 x 2,46 x 2,10 m chip conveyor: 4,00 x 1,25 x 1,50 m - Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electrical hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp The dat ...

CNC vertical machining center HERMLE C 22 U With path control Heidenhain iTNC 530 Year of construction: 2014 Travels : X 450 Y 600 Z 330 Speed range : 20 – 18,000 rpm infinitely variable (HSK 63) With the following accessories: NC swivel rotary table 450 mm x 360 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes standard version Internal coolant supply (IKZ 80 bar) Scraper belt conveyor left Chip wagon 450 l Coolant device Chip flood gun Oil mist extraction Manual Cabin Door , Automatic Cabin Roof Laminated glass safety pane Rotating transparent window (Rotoclear) Electr. Heat compensation iTNC Electr. Handwheel 3D probe Heidenhain BLUM Wz-bruch/ Vermessung 4 pieces Height adjustable machine shoes Operating instructions

turning diameter: 324 mm turning length: 600 mm control: Data Pilot 4290 HEIDENHAIN swing diameter: 680 mm bar diameter: 65 mm travel -x axis: 260 mm travel -z axis: 635 mm spindle speed:: 5000 1/min spindle bore: 79 mm C-Axis: 0,025 ° turret head: 12 Pos. / VDI 40 Driven Tools: 12 Pos. 4.500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 45 m/min taper in tailstock-quill: MK 5 tailstock travel: 580 mm drive capacity - spindle motor: 25 kW voltage: 400 V total power requirement: 50 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,50 x 2,46 x 2,10 m chip conveyor: 4,00 x 1,25 x 1,50 m - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electrical hand wheel - C-Axis / driven tools - chip conveyor - coolant equipmen ...

cutting diameter: 330 mm saw band length: 4640 mm cutting width: 510 mm capacity 90 degrees: flat: 510 x 320 mm capacity 90 degrees: round: 330 mm capacity 90 degrees: square: 320 mm capacity 45 degrees: flat: li. 350 x 320 / re. 380 x mm capacity 45 degrees: round: li. 320 / re. 320 mm capacity 45 degrees: square: li. 320 / re. 320 mm capacity 60 degrees: flat: li. 230 x 310 / re. 250 x mm capacity 60 degrees: round: li. 200 / re. 200 mm capacity 60 degrees: square: li. 200 / re. 200 mm weight of the machine ca.: 1,19 t total power requirement: 4,0 kW Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice clo ...

achine-Details Stock-No. 1105-03887 Type of machine CNC Lathe Make DOOSAN DAEWOO Type LYNX 200 LC Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time immediately Freight basis ex site Price Technical details turning diameter 460 mm turning length 300 mm control Fanuc 21-T turning diameter over bed 460 mm turning dia. Over Face-Slide 280 mm Travel -x axis 160 mm Travel -Z AXIS 330 mm centre distance 335 mm rapid traverse X-axis 12 m/min rapid traverse Z-axis 15 m/min turning speed range - main spindle 42 - 4,000 rpm spindle nose A2-6 Spindle Passage 51 mm Spindle Bore 65 mm spindle cone 1/20 power capacity - main spindle 7.5 kW no. of tool upper turret 10 . Shank diameter 32 (round) mm Shank diameter 20 (square) mm tube diameter max. 50 mm Chucking diameter 200 mm Coolant Tank 87 L total ...

cutting diameter: 300 mm saw band length: 3650 mm cutting width: 330 mm dimensions of saw-band: 3650 x 27 x 0,9 mm band speed: 15 - 100 m/min capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330 x 260 mm capacity 45 degrees: round: li. 260 / re. 200 mm capacity 45 degrees: square: li. 250 / re. 180 mm capacity 45 degrees: flat: li. 270x200 re. 200x160 mm capacity 60 degrees: round: li. 180 mm capacity 60 degrees: square: li. 170 mm capacity 60 degrees: flat: li. 170 x 170 mm motor: 2,2 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,9 x 1,8 m Control: Windows CE basiert Powerful miter band saw for cuts from 45 ° right to 60 ° left Electro-hydraulic CNC machine with Windows CE based touch screen control -Automatic cycle (cuts from 0 ° to 60 ° left) -Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from  ...

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 840 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 8000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 (15 min) kW tool change unit: 30 Pos. voltage: 380 V total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - CNC Control Siemens 840D - INTERFACE FOR 4 AXIS+ 4 AXIS NIKKEN - HP COOLING TROUGHT THE SPINDEL 20bar - CHIP CONVOYER The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM

Turning diameter: 1600 mm Center distance: 10000 mm Spindle bore: 110 mm Numbers of bed guide ways: 2 Weight between centres maximum: 30000 kg CNC Brand: Siemens CNC latheGurutzpe - GLX 16.15.7  4 bed way construction Bed width 1350 mm Chip conveyor 4 chuck 1250 mm Filtration / Coolant system 2 x C-Type steady rest Motorized tailstock Max. turning Ø:1600mm Spindle bore:  110mm Speedrange:    800Rpm Spindle power: 71kW ATC / revolver:4 Chip conveyor: Yes Pinole taper:  6Mk Quill Ø:       220mm Length:        12000mm Width:         4000mm Height:        3200mm Weight:        35000kg

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 660 mm y-travel: 510 mm z-travel: 560 mm CNC-control: Sinumerik 810 D ShopMill SIEMENS table-size: 900 x 485 mm max. table load: 450 kg spindle taper: SK 40 spindle turning speed range: 8.000 U/min feed stepless: 1 - 10.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 9,25 kW tool change unit: 20 Pos. coolant: chip conveyor: Spiralförderer voltage: 380 V total power requirement: 11,0 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,20 x 2,75 x 2,50 m - Serial-No.: 07010128 - control: Sinumerik 810 D ShopMill - electrical hand wheel - chip conveyor - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2360 mm y-travel: 600 mm z-travel: 800 mm Control: Siemens 840 D total power requirement: 69 kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: m Universal machining center for 5-axis simultaneous machining. Technical specifications: Traverse X/Y/Z 2360 x 600 x 800 mm Pendulum stroke with vertical spindle left/right 1160/700 mm Table clamping area 2750 x 600 mm with 4 T-slots Tool holder SK 50 Spindle speeds 30 - 4000 rpm. Equipment: CNC control Siemens 840 D with Shop Mill DIN ISO CNC rotary table type RTA 3-520 CNC swivel milling head infinitely variable positioning Tool changer with 26 tool places Chip conveyor Coolant system with high-pressure pump and belt filter system Coolant through spindle 20 bar Electric hand wheel Space requirements: Machine length 5650 mm + 1800 mm with chip conveyor Machine width 3500 mm plus control panel Machine height 3200 mm M ...

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 15 - 70 U/min total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m SPECIAL PRICE! High-performance vertical circular saw VKS 370 (20177/201178) · miter left 60° + right 45° · Vice with double clamping arm · Robust prism guide of the saw head, adjustable dovetail guide. · Chip brush · Automatic cooling · Metal handle for high clamping force · Solid, strong cast iron table · Spring pack · Chip removal brush ATTENTION: Price is without saw blade! (saw blade price EUR 204) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2006 Control Heidenhain iTNC 530 Speed [rpm] 18000 Travel X/Y/Z [mm] 1150/710/710 Tool Aufn. HSK63 Spindle: Motor spindle technology Speed 18,000 rpm Power: 28 kW Torque 121 Nm Tool holder HSK-A63 NC swivel head: B-axis 0.001° Swivel range -120°/+30° NC rotary table: C-axis 0.001° Clamping surface ø800 mm General: Tool magazine 2x 16 stations Rapid traverse in X/Y/Z 30 m/min Rigid table clamping surface 1,500 x 795 mm Table load (max.) 800 kg Equipment/accessories: Displacement measuring system directly in X/Y/Z (glass scales) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure, 40 bar Workpiece Measurement Preparation Infrared Probe, m&h Tool breakage control Brankamp Oil mist extraction Electrostatic separator Set-up operation mode 4 Other accessories: various tool holders, ...

x-travel: 3.000 mm y-travel: 2.500 mm z-travel: 2.475 mm w-axis: 800 mm rotary table: Juaristi MG-12 Rotary table surface: 2.000 x 2.500 mm T-slots: 11 T-slot - width: 170 mm table weight: 8.000 Kg table rotation: B- Achse – 0,001 ° Control: HEIDENHAIN i TNC-530 diameter of quill: 130 mm speed: 3.000 U/min tool taper: ISO 50 DIN 69871/1-B milling head: swivelling +/-: 2,5/2,5 Grad spindle drive: 30 kW transmission ratio: 2 speeds:: 0-2.500 U/min boring spindle: D`ANDREA UT5-800-S mm/min diameter: 800 mm cross travel: 250 mm Tools changer: 30 pos. Internal cooling system: 20 bar Chip coveyor: Inkl. handwheel: HEIDENHAIN HR-420 weight of the machine ca.: 45 t dimensions of the machine ca.: 9800 x 7320 x 5500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platfo ...

Key data: 1 m²

Type ASA 2403 Airflow 36 cbm/min. Connection 400 V 50 Hz Motor 1.1 kW Speed 2,850 rpm Suction nozzle 1 x 120 mm, 1 x 100 mm Dimensions: 90 x 48 x 210 cm • For milling, planing and sawdust (not suitable for dust) • 180° rotatable suction unit allows suction to be guided from below or above • Sturdy metal fan wheel • Chassis as standard for better stability and easy manoeuvring • Quick-release fasteners for filter and chip bag • Fine filter bag double woven • Chip collection volume 110 l • Filter area 1.92 m²

Key data: 130 mm, 4000 mm, 2500 mm

TOSHIBA BP-130R22 Year 2007 SPINDLE DIAMETER 5.12" (130mm) TAPER IN SPINDLE #50 VERTICAL TRAVEL, Y-AXIS 100" (2500mm) CROSS TRAVEL, X-AXIS 160" (4000mm) SPINDLE TRAVEL, Z-AXIS 28" COLUMN TRAVEL, W-AXIS 60" TABLE SIZE (BUILT IN B-AXIS) 86.6" X 70.8" TABLE LOAD CAPACITY 44,000 LBS TABLE INDEXING B-AXIS 0.001 DEGREE SPINDLE SPEEDS (3-RANGES) 5-2500 RPM EQUIPPED WITH: TOSNUC 888 CNC CONTROL 60-STATION AUTOMATIC TOOL CHANGER THROUGH SPINDLE COOLANT CHIP & SPLASH ENCLOSURE CHIP CONVEYOR 40/30 HP SPINDLE MOTOR NOTES: INSPECT IN PLANT UNDER POWER

Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000

Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimen ...

Key data: 400 mm, 400 mm, 375 mm

Machine Details Stock-No. 1105-03922 Type of machine Machining Center - Universal Make DMG DECKEL MAHO Type DMU 40 EVO Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 400 mm Y-Travel 400 mm Z-Travel 375 mm control iTNC 530 Heidenhain Turning speed range - Main spindle max. 20,000 min/-1 power capacity - main spindle 19 kW max. torque 130 Nm tool taper SK 40 swivellable -105+ 40 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load approx. 275 kg rotatable C: 360° Max. workpiece diameter 500 mm max. workpiece height 400 mm number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip to chip a ...

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...

Ref. -No.: 10372 Manufacturer: STAMA Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

Key data: 800 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03936 Type of machine Machining Center - Vertical Make MORI SEIKI Type SV 50 /40 Year of manufacture 1996 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time MAY 2021 Freight basis EXW (Incoterms 2010) loaded on Technical details x-travel 800 mm y-travel 510 mm Z-Travel 510 mm control MSG 516 number of spindle speeds 10000 Spindle Drive 22/18,5 kW Rapid Travel X/Y/Z 32 mm/min table-size 1320x600 mm tool changing time 0,9 sec tool magazine: 30 BT 40 Raised Column 200 mm total power requirement 51 kW Weight of the machine approx. 6.9 t Accessories Chip conveyor rear discharge 2 Memory 640 m Helical Interpolation Additional information Achine has 2 chip conveyors. CNC MSG 516

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

Key data: 190 mm, 700 mm

Machine Details Stock-No. 1105-03943 Type of machine CNC Lathe Make NAKAMURA Type Super NTJ Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time as per agreement Freight basis ex foundation Price Technical details turning diameter 190 mm turning length 700 mm control Fanuc 18 ITB turning speeds 5,000 rpm Rapid traverse: 16,40.6 ( X,Z,Y ) power capacity 15/11 KW main/counter locker kW Number of tools 2 x12 / 2 x 24 pcs. Tool Taper Direct Number of axles 9 controlled St. driven Tools 12 pro Revolver chip conveyor Mayfran ejection right kW hollow clamping cylinder rod passage 82 Power on 30000 h weight of the machine approx. 13 t Additional information NICE MACHINE WITH Y AXIS BAR LOADER IEMCA MATER 885 SOME LIVE TOOLS AND FIXED TOOLS CHIP CONVOYER

faceplate diameter: 3.000 mm swing diameter: 3.200 mm turning height: 2.200 mm Control: 840 D ShopTurn Siemens cross rail adjustment: 1.500 mm tool travel: 1.250 mm faceplate turning speed range: 0 - 120 U/min power capacity: 75 kW Driven Tool Stations:: speeds: 10 - 3.000 U/min output: 22 kW max. Torque: 320 Nm tool adaptor: HSK 160 (VDI 60) tool magazin:: number of toolpositions: 16 pos. weight of tools max.: 25 kg total power requirement: - kW weight of the machine ca.: 36 t dimensions of the machine ca.: 6,0 x 6,0 x 3,5 m Chip conveyor: Coolantsystem: C-axis: 0,001° hydraulic system: Tool Magazine: 16 pos. tool holders: div. Vertical Turning Machine KONRAD SEIDLER - Vertimaxx 3000 - including clamping material, various tool holders - 1x angle bore and milling head 90° Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed 2300 rpm (co ...

x-travel: 3.000 mm y-travel: 1.000 mm z-travel: 1.000 mm control: iTNC 530 HEIDENHAIN table-size: 3.230 x 1.050 mm table load: 8,0 t spindle taper ISO: 50 tool change unit: 24 Pos. spindle turning speed range: 30 - 3.500 U/min drive capacity - spindle motor: 25 kW feed stepless: 1 - 5.000 mm/min rapid traverse: 10,0 m/min chip conveyor: Spiralförderer voltage: 380 V total power requirement: 35 kVA weight of the machine ca.: 12,0 t dimensions of the machine ca.: 7,40 x 3,65 x 2,75 m hydraulic power unit: 1,40 x 0,50 x 0,60 m : 0,45 x 0,70 x 0,85 m - Serial No.: VH-30041 - Maschine ON 23.724 h - Spindel ON 7.968 h - CNC-Control: iTNC 530 HEIDENHAIN - Universal Milling Head (Huron-Type), manual - 2x Screw type chip conveyor at front and back of table - Oil chiller unit - Y-Axis guitde ways with new TURCITE - Ball screws and bearings in X/Y/Z axis renewed The data for this ad was created  ...

turning diameter: 36 mm turning length: 100 mm control: Traub TX 8i turning speeds: 6300 U/min c-axis: 0,001 turret (x-stations): 12 angetrieben turning speeds: 6000 U/min x-axis: 370 mm z-axis: 250 mm y-axis: +/- 20 mm gripping station: 36 mm turning speeds: 6300 U/min c-axis: 0,001 0 collet unit: 2x Hainbuch HSP/GSP SK 6970 ZW/G load magazine: FMB turbo 5-42 chip conveyor: ja / yes kW total power requirement: 33 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 1,22 x 1,7 + FMB m parts conveyor: ja / yes front attachment: 5(7) rear station: 5 (4 angetrieben) CNC automatic lathe Traub TNK 36, year 2005, with bar feeder FMB turbo 5-42 This turning-milling centre is in a very good condition and equipped with 2x Y- axes and driven tools on 3 tool carriers. Tool carrier 1 = turret 12-fold driven, Y-axis +/-20mm Tool carrier 2 = front attachment 5 stations (4 driven) Too ...

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 300 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed range: 1 - 20.000 mm/min rapid traverse: 36 m/min coolant: IKZ 30 bar voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,2 t dimensions of the machine ca.: 2,35 x 4,15 x 2,95 m chip conveyor: 2,60 x 1,65 x 1,20 m Oil cooler: 0,50 x 0,70 x 1,45 m water cooling unit: 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction The data for this ad was created with ModulMWS - the software solution of L ...

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.