chip used for sale

Extruder for the production of packaging chips Year of manufacture: 1994 Screw: four-course Cylinder: 2-pass Nozzle plate "FLIPS/balls diameter 4mm/1-fold Cutting device with 4-blade cutter head Dosing and suction device Machine is electrically connected, dry running possible Spare parts: 2 4-pass screws, 1 nozzle plate

Complete chipping plant EWD, capacity 30-40 m3 of logs per hour. The plant was dismantled in Germany. Located in Moscow. Technical data and price on request.

Chip shredder for material from the gunmetal or brass sector. Manufacturer: Erdwich Zerkleinerungsmaschine GmbH Condition: Little used; good to very good. - Range of application: Shredding of gunmetal or brass chips - Throughput capacity: 150 kg/h - Process sequence: The containers with the chips are fed into the hopper of the shredding machine by means of a forklift truck. The dumping height is approx. 2,950 mm. The shavings are crushed by the crushing plant and discharged into the on-site container. Occasional impurities are discharged via the impurity flap and and discharged into a separate container. Operating Instructions: 1 x in paper form; 1 x as CD-ROM in German or English. Temperatures: The system/machine as well as its switchgear combination (control) are designed for operation from 0 to 35 degrees room temperature at 60 % humidity. Deviating operating conditions r ...

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

Dimensions (L/W/H): 1750x1100x1640 mm Weight: 1000 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1737x1167x1650 mm Weight: 1300 kg Total power requirement: 18,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2455x2168x1730 mm Weight: 3200 kg Total power requirement: 37 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2455x1970x1730 mm Weight: 2600 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2285x1420x1730 mm Weight: 1600 kg Total power requirement: 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2285x1420x1730 mm Weight: 1600 kg Total power requirement: 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2765x2520x1730 mm Weight: 3600 kg Total power requirement: 55 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

In excellent condition, shaft drive.

Production Year 2015, start use in end of 2015. Used for two Year. Was used with 75kW electric motor. Now it is without motor. Can be used with some diesel motor. Have spare knives. Can input up to 42cm diameter log

Abrasive bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory grinding round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies -Manufacturer: Walther Trowal, ceramic grinding wheel type C 15 x 30 ZS Ultra-Chips -Grain: see photos -Price/tax: complete -Transport dimensions: 900/200/H500 mm -Total weight: 76 kg

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700  ...

Ceramic and plastic vibratory grinding and polishing chips / porcelain chips balls, triangle, tristar, cylinder, elipse, pyramid, cone... sizes and prices on request

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Magnetic chip conveyor of a PFAUTER PA320 can be used universally. Length 135cm

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

Three-point wood chipper, drive PTO 540 – 1,000 rpm, 4-blade chipping disc, feed up to 160 mm, Chip length 15-50 mm, power requirement 18-60 kw. Machine weight approx. 600 kg. Oil motors for wood feed leaking, one flap on the feed funnel loose, no feed electronics installed, electrical emergency stop available. Other wood chippers available - also motorized machines. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Spaen centrifuge in the run-through process CEPA Padberg Y. 1986 1400 rpm Diameter 500 mm Spaene throughput up to 600 L/per hr = approx. 1.2 to. / Hour incl Spaene supply Plant Tuev prued until 2016 (last check see sticker) In the fully automatic AS series, short rieselfaehige Spaene are continuously and equally fed from above via a foerderer of the centrifuge. Entoelung short, rieselfaehiger spaene, aluminium and steel Continuously Up to 600 l/h

Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee

Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar specifications: • Condition: new • Length (mm): approx. 7520 • Width (mm): approx. 770

Manufacturer: SOMMERMEYER Filtertechnik GmbH Type: SF 38 Y.O.M.: 1997 Conveyor length total approx. 3000 mm Throw in: approx. 1300 x 400 x 400 mm Ejection height approx. 1300 mm Drive Gearmotor 0.25 kW 220/400 V Coolant pump Brinkmann TB303/300 160 l/min H: 18 m 1.7 kW 230/400 V Total dimensions: approx. 3000 x 1600 x 1700 mm All items are checked for function before delivery, if technically possible! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Jensen A 3.3-245 Z, three-point attachment for PTO drive 540 rpm, 2-knife chopping disc, 2-roller feeder for wood up to 16 cm (feed opening max. approx. 160 x 245 mm) with adjustable feed speed, control pre-stop reverse, own closed hydraulic system, rear lights according to StVZO, toolbox below the feeder funnel. Weight approx. 700 kg. Well-preserved machine with age-related wear and signs of use, paint defects, rust, operational. Markenfabrikat made in Germany" (Jensen - since 1884). More wood chippers - also motor machines in stock!

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

Wood chips concrete silo Ø 6,200 mm Silo height 18,500 mm + 1.0 meter lid approx. 400 cbm capacity to be handed over Tel. +49 (0)172 - 8345457

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Inlet connection: Ø 600 mm -Outlet connection: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg

Oven, wood chip stove, biomass stove, boiler used Manufacturer: MAXXTEC Type: IT-A-550-100-V Year of construction 2001 550 kW 350°C 540 l Diameter approx. 1700 mm Dimensions: approx. 3000 x 1700 x 4500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...

AME Scraper Belt Conveyor KB530 Year of manufacture: 04/2016 Condition: NEW Overall length: 2.50 m Hinge belt width: 0.45 m Lifting height: 1.10m Total width: 1.50m Max. capacity: 140 l Weight: 494 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

Offer 24083 Specifications: - Capacity 300 L - Load capacity up to 750 kg - Drive-in pockets for forklifts -Tilt - Drain tap for draining liquids - Mobile base frame with 2 swivel castors - Space requirement W 1500 x D 750 x H 1250 mm - Weight approx. 220 kg

Year of construction 2006 Chip conveyor belt Mobile substructure Delivery date: immediately Ref: BU250081A Price on request. We supply and install worldwide.

Collecting pan, floor pan, collecting container, flat steel pan, collecting pan for coolant liquid -Collecting tray: for chips with coolant liquid, 1200 x 800 mm -Trough height: 400 mm, can be shortened -Rectangular cutout: 420 x 215 mm -Dimensions: 1200/800 / H400 mm -Weight: 10 kg

Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Chip Ribbon Busch KF 145-80; cleaned and tested; Conveying height 1450mm; Bulk length 800mm; Width 625mm; suitable for saddle stitchers or similar. Waste conveyor KF 145-80; cleaned and checked; conveying height 1450mm; lenght of delivery chute 800mm; wodth 625mm; used for saddle stitchers or other machines.

Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg