chip used for sale

Control: FANUC 21I-MA Technical data Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 400 mm Table divisions (B): 360000 ° Pallets: number: 2 Length: 400 mm Width: 400 mm Time of changing palets: 8 sec Tool changer: Number of tools: 20 Tool diameter: 100 mm Tool lenght: 250 mm Max. tool-weight: 5 kg Time of tool changing: 1.5 / 3.0 sec Spindle nose:: BT 40 Horizontal spindle speeds: stepless from: 160 rpm up to: 8000 rpm Feed range: 1 - 10000 mm/min Rapid traverse:: 48 m/min Spindle motor: 5.5 / 3.7 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3550 mm Width: 1600 mm Height: 2600 mm Various accessories: Tool changer: with double gripper Number of tools: 20 Full splash cabin Coolant system Chip conveyor Lamp

swing diameter: 530 mm turning diameter: 150 mm spindle passage: 65 mm control: SIEMENS 840 C travel x1: 175 mm travel y1: +/- 70 mm travel z1: 433 mm travel x2: 175 mm travel y2: +/- 70 mm travel z2: 433 mm spindle turning speed range: 38 - 4000 U/min C-axis: 2 x tool turret: 2 x 12 Pos. number of driven tool stations: 2 x 12 total power requirement: 33 kW dimensions of machine L x W x H: 3,95 x 2,49 x 2,6 m Accessories: collet fixtures on main spindle and sub spindle, one collet for main spindle and one for sub spindle, various tool holders (for driven tools as well), various spindle reductions, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: FANUC 18 M Technical data Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Table divisions (B): 1 ° Pallets: Length: 450 mm Width: 450 mm Time of changing palets: 12.5 sec Transport weight: 300 kg Tool changer: Number of tools: 40 Tool diameter: 100 mm Tool lenght: 300 mm Max. tool-weight: 6 kg Time of tool changing: 1.6 / 4 sec Spindle nose:: MAS BT 40 Horizontal spindle speeds: number (steps): 2 stepless from: 120-3000 rpm up to: 3000-12000 rpm Feed range: 1 - 15000 mm/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Spindle motor: AC 22/18.5 kW Feed motor: 3.8 kW Total power required: 45 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 3048 mm Width: 4051 mm Height: 3180 mm Various accessories: Internal coolant supply (cts): 20 bars  ...

turning diameter: 220 mm turning length: 250 mm control: SIEMENS SINUMERIK 820 T swing diameter: 380 mm chucking diameter: 250 mm x-travel: 200 mm z-travel: 250 mm spindle turning speed range: bis 4000 U/min rapid travel - longitudinal/face: 15 m/min total power requirement: 27,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,2 x 2,9 x 2,2 m acc.: hydr. 3-jaw chuck, various tool holders for turret, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2800 mm y-travel: 1000 mm z-travel: 1200 mm table surface area: 2000 x 800 mm rotary table dia.: 800 mm spindle taper: SK 50 spindle turning speed - stepless: 50 - 2000 U/min max. torque on the spindle: 3000 Nm spindle drive: 30 kW feeds longditudinal/cross/vertical: 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical: 7 m/min control: SIEMENS control: SINUMERIK 850 M no. of tools in magazin: 56 workpiece diameter at full load: 114 mm wotkpiece diameter with 2 vacant positions: 200 mm workpiece length: 400 mm weight of tools max.: 16 kg tool changing time: ca. 8 - 9 sec internal coolant system feed: ja / yes total power requirement: kW weight of the machine ca.: 25,4 t dimensions of the machine ca.: 6,6 x 3,15 x 2,98 m = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures ...

Key data: 400 Siemens, 1250 810 D, 128

Center height: 400 mm Center distance: 1250 mm Spindle bore: 128 mm CNC Brand: Siemens CNC Model: 810 D 3 chuck 315 mm 3 chuck 500 mm Boring bar holder Parat tool system with 4 inserts One off last “Made in Goppingen” machine Chip conveyor New price EUR 152.500   Swing over bed Ø:        820mm Swing over cross slide Ø:515mm DBC Turning Length:      1.250mm Spindle bore:            128mm Spindle power:           46kW Tailstock spindle Ø:     125Ø Stroke pinole:           280mm Spindle taper:           6Mk Speeds / ranges:         1600Rpm Feed rate X-Axis:        12.500mm/min. Feed rate Z-Axis:        ...

x-travel: 660 mm y-travel: 500 mm z-travel: 600 mm table surface area: 630 x 500 mm spindle taper: SK 40 spindle turning speed range: 20 - 6.300 U/min feeds: 30 m/min control: PHILIPS CNC 532 internal coolant system feed: 40 bar total power requirement: 50 kW weight of the machine ca.: 13,3 t dimensions of machine: 4,98 x 2,78 x 2,93 m with rotary pallet changer and hydr. swivelling head (horiz./vert.) Accessories: chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm size of pallet: 630 x 500 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 1 - 4000 mm/min rapid travel x/y/z: 10 / 8 / 10 m/min control: PHILIPS CNC 432 spindle motor: 15 kW total power requirement: kW weight of the machine ca.: 6,0 t dimensions of machine: 4,10 x 2,17 x 2,55 m acc.: hydr. swivelling head with hydr. tool clamping, chip conveyor, coolant, entire protection cabin with pallet changer (two pallets) and 60-pos. tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 63 mm arm length: 2000 mm workpiece height max.: mm threading:: 48 mm column diameter: 450 mm bore head horizontal movement: 1550 mm drilling head vertical adjustable: 800 mm spindle stroke: 400 mm transmission ratio: 16 Distance Pinole - Ground Plate: 1600 mm turning speed range: 25-1600 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 5 total power requirement: 5,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3080 x 1250 x 3290 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head  ...

x-travel: 1000 mm y-travel: 508 mm z-travel: 460 mm size of pallet: 1240 x 550 mm numbers of pallets: 2 workpiece weight: 800 kg spindle taper ISO: 40 spindle motor: 5,5 kW turning speed range: 28 - 4000 U/min no. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 4,50 x 3,00 x 2,65 m acc.: chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 , 300

Capacity round maximum diameter: 300 mm Angle degrees maximum: 300 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Cutting 90°:        300Ø Cutting flat 90°:   300 x 300 mm Feed single stroke: 10mm Feed multiple stroke:6.000mm Cutting speed Vario:0 - 115 m/min. Circle blade size:  4640 x 41 x 1,27 mm Power:              4,1 kW Chip conveyor:      yes  Length:             5.800 mm  Width:              3.000 mm  Height:             2.600 mm  Weight:             5.000 kg 

length in total: 5400 mm band width: 200 mm conveying height: variabel mm total height over floor: variabel mm motor power: 0,73 kw weight: t dimensions of the machine ca.: 5,4 x 0,31 x 0,21 m for plane or light increasing chip transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm Control: FANUC 16i-MB table-size: 500 x 500 mm table weight: 500 Kg a-axis: +45 / -135 ° c-axis: 360 ° distance table / middle of spindle: - mm number of spindle speeds: 10000 U/min/rpm tool taper: ISO 40 spindle drive: 18,5 / 22 kW rapid travel x/y/z: 70 m/min Tools changer: - pos. dimension of workpiece: dia 725 mm total power requirement: - kVA weight of the machine ca.: 21 t dimensions of the machine ca.: m The machines of the Clock series can also be used as 5-axis multitasking machines. The Clock series is characterized by high speed and precision. paired with a very stable machine concept. Thanks to the fast tool change and pallet exchange, the machines achieve a very high productivity. As 5-axis version the Clock 700 is equipped with a very stable Swivel table equipped. The swivel table is double on the axes and thus guarantees ...

Key data: 550 Fanuc, 550 21 iTB, 12

Turning diameter: 550 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 iTB C – Axis 360.000 positions Chuck spindel 250 mm Chuck sub spil 160 mm Package with tool holder some driven Collet device with collets Max. turning Ø:  550mm X-Axis:          210mm Z-Axis:          550mm Spindle bore:    65mm Speedrange:      4000Rpm Spindle power:   15kW Subspindle speeds:4000Rpm Subspindle power:11kW ATC / revolver:  12 Speed live tools:4000Rpm Speed live tools:4000Rpm Power live tools:5,5 kW Chip conveyor:   yes  Length:          3.200 mm  Width:           1.900 mm  Height:          2.100 mm  Weight:        ...

Key data: 1030 Fanuc, 1650 18i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

length in total: 8800 mm band width: 200 mm conveying height: variabel mm total height over floor: variabel mm motor power: 0,73 kw weight: t dimensions of the machine ca.: 8,8 x 0,31 x 0,21 m for plane or light increasing chip transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 100 mm arm length: 3150 mm workpiece height max.: mm threading:: 63 mm column diameter: 700 mm bore head horizontal movement: 2580 mm drilling head vertical adjustable: 1250 mm spindle stroke: 500 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 8-1000 U/min feed range: 0,06 - 3,2 mm/U tool taper: MK 6 total power requirement: 13 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4780 x 1630 x 4600 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head ...

Key data: 530 Okuma, 1000 OSP-U100, 12

Turning diameter: 530 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Okuma CNC Model: OSP-U100 Max. turning Ø: 530mm X-Axis:         280mm Z-Axis:         1.000mm Spindle bore:   100mm Speedrange:     4500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  120mm Quill Ø:        90mm Length:         2.200 mm  Width:          2.000 mm  Height:         2.200 mm  Weight:         6.200 kg 

max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 200 mm max. module: 10 min. module: 1 profile depth: 25 mm x-axis: 630 mm y-axis: 400 mm z-axis: 190 mm U-axis: 80 mm a- axis: 360 ° b-axis: +/- 30 ° max.helical angle: 30 ° grinding wheel diameter: 250 - 350 mm spindle speeds (infinitely variable): 1500 - 2800 U/min grinding slide feeds: 6000 mm/min center distance betw. workpiece-tool min/max.: pitch max.: 9000 mm pitch min.: 10 mm electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 38 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,8 m horizontal Profil Gear Grinding Machine for Spur and Helical External Gears. Machine can be used with Abrasive Electrocorundum Wheels or with CBN or Elbor Wheels. Equipped with: - CNC Control FANUC 0i-MF -- for 6 Controlled Axis (4 simultaneously) - Gear Measuring System - Chip and Sludge Removal System - Pape ...

bore capacity in steel (diameter): 125 mm arm length: 4000 mm workpiece height max.: mm threading:: 80 mm column diameter: 800 mm bore head horizontal movement: 3400 mm drilling head vertical adjustable: 1190 mm spindle stroke: 560 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 6,3-800 U/min feed range: 0,06 - 3,2 mm/U tool taper: metr. 80 total power requirement: 18 kW weight of the machine ca.: 28,5 t dimensions of the machine ca.: 5910 x 2000 x 5120 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilli ...

Key data: 1250 Fanuc, 1600 18-T, 900

Table diameter: 1250 mm Turning diameter: 1600 mm Turning height: 900 mm Motor power: 45 HP/kW Positions ATC: 0   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18-T Work load 5000 Kg Package BT 50 tool holders Tool size L 380 x 50 Kg Closed housing with front door Free 03.2022 Max. turning Ø:               1.600mm Table  Ø:                     1.250mm Horizontal movement support:  900mm ATC / revolver:               12 Single column or double column:singel  Speeds / ranges:              350Rpm Power:                        45kW Maximum turning height:       1.200mm C-Axis:        &n ...

Key data: 850 Fanuc, 1350 Oi, 12

Turning diameter: 850 mm Turning length: 1350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         1.350mm Spindle bore:   102mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5000Rpm Power live tools:7,5 kW Chip conveyor:  Yes  Stroke pinole:  5mm Quill Ø:        100mm Length:         4.500 mm  Width:          2.105 mm  Height:         2.300 mm  Weight:         7.500 kg 

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1200 mm turning diameter over slide rest: 900 mm turning length: 2000 mm Control: Siemens spindle passage: 90 mm type: Sinumerik 3T Tool changer: 16 number of spindle speeds: 2,4-900 U/min spindle motor: 54 kW tail stock: 3 jaw chuck Forckrath: 630 mm chip conveyor: total power requirement: 87 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 11x4,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10500 mm y-travel: 2750 mm y-travel: (3350) mm z-travel: 1500 mm turning speeds: 3500 U/min Tool changer: 80 Control: Heidenhain TNC 430 M positioning accuracy: 1 ° milling-head swivable +/-: CNC Plate area: 12000x2500 mm chip conveyor: spindle taper ISO: 50 Spindle capacity: 37 KW Feed: 6000 mm/min Rapid movement: 15000 mm/min total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 18,1x6,7 m CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2100 mm turning diameter over slide rest: 1300 mm turning length: 6800 mm workpiece weight: 25000 kg main drive motor: 140 kW Control: Siemens type: 840 C faceplate: 1100 mm bed width: 2500 mm steady: 800 mm steady: 800 mm steady: 800 mm steady: 600 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 Siemens, 630 840 D, 800

Pallet length: 630 mm Pallet width: 630 mm Longitudinal X: 800 mm Cross Y: 800 mm Vertical Z: 800 mm Number of pallets: 2   Positions ATC: 120   CNC Brand: Siemens CNC Model: 840 D X – Travel:               800mm Y – Travel:               800mm Z – Travel:               800mm B-Axis indexing:          360° Table Length:             630mm Table Width:              630mm Table load:               1.200Kg Number of pallets:        2 Feed rate X-Axis:         60.000mm/min. Feed rate Y-Axis:         60.000mm/min. Feed rate Z-Axis:      &n ...

x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 9700 mm y-travel: 3500 mm z-travel: 640 mm w-axis: 3000 mm Control: Siemens type: 840D PL spindle diameter: 200 mm Spindle capacity: 85 Kw surface area: 9000x2800 mm Table load: 40000 kg high speed spindle taper ISO: 50 chip conveyor: coolant: total power requirement: kW weight of the machine ca.: 193,8 t dimensions of the machine ca.: 22,4x10,2x8,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: swing diameter: 600 mm spindle bore: 73 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm table surface area: 500x400 mm control: Siemens type: 840 D spindle taper ISO: 40 spindle turning speed range: 8000 U/min : type of pallet-changer: 2 Rotary table: 360 ° Cooling through the spindle: bar Tool changer: 40 chip conveyor: total power requirement: kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm max. number of teeth: 150 max. module: 5 total power requirement: 16 kW weight of the machine ca.: 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. 2 workspindle units, left and right, which can be set at any angle. CNC controlled: Z and W Axes for tool cr ...

x-travel: 8000 mm y-travel: 1000 mm z-travel: 1250 mm dividing head: CNC chip conveyor: Universal angular milling head 2-axis adjustable: control: Fagor type: 8025 : CNC clamping plate: 1500x3000 mm clamping plate: 1500x4000 mm clamping plate: 1500x4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 900 Fanuc, 1650 18i-T

Turning diameter: 900 mm Turning length: 1650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:900mm X-Axis:        470mm Z-Axis:        1.650mm Speedrange:    1-800 Rpm Spindle power: 45kW ATC / revolver:12 Control:       Fanuc 18i-T  Chip conveyor: Yes  Length:        5.030 mm  Width:         2.300 mm  Height:        2.800 mm  Weight:        16.100 kg  Tailstock Renishaw HPA Tool Setting Arm Filtermist FX 7002 Mist Extraction Unit & Foot Switches  

turning diameter: 1250 mm swing diameter: 1160 mm turning height: 800 mm faceplate diameter: 1000 mm total power requirement: 97 kW weight of the machine ca.: 25000 t dimensions of the machine ca.: m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _______________________________________________________ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Total electrical load 97 kW - 400 V -  ...

spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1500 mm w-axis: 700 mm spindle taper: ISO 50 control: Siemens type: 850 M mm table surface area: 2000x1600 mm Table load: 12000 kg turning speeds: 12-3000 U/min spindle motor: 30 kW feed: 0-6 m/min chip conveyor: coolant: total power requirement: 60 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 8x6,3x5,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 760 Mazatrol, 1585 Matrix Nexus

Turning diameter: 760 mm Turning length: 1585 mm Turret positions: 0 CNC Brand: Mazatrol CNC Model: Matrix Nexus Max. turning Ø:         760mm X-Axis:                 630 + 230 (X2) mm Y-Axis:                 230mm Z-Axis:                 1.585mm B Axis:                 225 ° Spindle bore:           77mm Speedrange:             4000Rpm Spindle power:          30kW Subspindle speeds:      4000Rpm Subspindle bore:        77mm Subspindle power:       26kW ATC / revolver:         40 Capto C6  B-Axis Too ...

x-travel: 800 y-travel: 650 mm z-travel: 542 mm Control: Heidenhain type: TNC 426 table surface area: 800x600 mm c-axis: 1/1000 ° table - tiltable: 45 Grad swing dia.: 1200 mm spindle taper ISO: 40 turning speeds: 0-5000 U/min Tool changer: 30 Pos : chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 290 mm turning length: 450 mm control: CNC spindle passage: 65 mm turning diameter over slide: 185 mm turning speeds: 3000 U/min Tool changer: 12 work piece power: VDI 40 live tooling: chip conveyor: kW coolant: swing diameter: 600 mm total power requirement: 45 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 4,5x2,5x2,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1100 _Unknown / Other, 600 Celos, 800

Table length: 1100 mm Table width: 600 mm Longitudinal X: 800 mm Cross Y: 530 mm Vertical Z: 510 mm Positions ATC: 40   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Celos X – Travel:               800mm Y – Travel:               530mm Z – Travel:               510mm Table Length:             1.100mm Table Width:              600mm Table load:               1.000Kg Feed rate X-Axis:         30.000mm/min. Feed rate Y-Axis:         30.000mm/min. Feed rate Z-Axis:         30.000mm/min. Spindle Taper:            40ISO/Bt/Mk Power o ...

spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 70-550 mm bore depth: 10000 mm table load: 10 t turning speeds: 35-92 + 92-595 U/min transmission ratio: 2 clamping diameter max.: 1000 mm workpiece weight: 10000 kg chip conveyor: coolant: total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: 860 steady: 860 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.