chillerdivision used for sale

chiller, chiller Emicon RAS 801 S KP YOC 2018 80 Kw cooling capacity 22.8 Kw. Electrical Power, Amp. 62 Refrigerant R290 Weight 1.106 kg.

Cold water kit, Chiller make AIREDALE, 450 KW, Y.O.M. 2004, Freon R 407C. More pictures and information on info@frigocom.at or on 0436641838175.

17 Cooling system for cooling birds by using chilled water, dimensions: (17x) 3020 mm x 1000 mm x 530 mm.

Make: HIROSS Type: SLO920D02200X Power: 95 kW refrigerant: R407C 2 pcs. compressor Maneurop Compressor type: SZ175S4RA Price on request

Automatic shrink wrapping machine Automatic machine for packaging and shrinking with heat-shrinkable foil for elements within the film/sleeve/400-400 mm dimension. The line includes a feeding conveyor, a packing machine, an intermediate conveyor, a sealing device and a receiving conveyor. The welding speed and temperature are set manually depending on the film thickness.

EXTRUSION LINES FOR SPIRAL PE PIPES / 300/1200 Max. diameter: 1200mm Min. diameter: 300 mm Diameter pipes D 300,400,500,600,700,800.900.1000,1200.SN4 and SN8 EXTRUDER/...1 Manufacturer/ Top Industri China Model/ D.65 Year/ 2007 Serial no./ No.1234 Screw diameter/ 65 Screw L/D ratio/ 33 Output capacity/ (kg/h) 250 Main drive power/r (kW) 50 Screen changer/ (YES/NO) No Co-extrud (YES/NO) No Running hours/ DIE HEAD Manufacturer/Fabricante Top Industri China Model/Modelo K2 Year/año 2007 Serial no./ No.1234 Extrusion tools and calibration tools A total of 8 sets of tools for extrusion and calibration of a square profile CALIBRATION TANK/ YES Manufacturer/ Top Industri China Model/lo Top Industri China 6000 Year/ 2007 Serial no./ No.1111 Pipe range diameter/ square profile No Vacuum pump/ 4kw Length/ 6000 COOLING TANK/ YES Number/ 1 Manufacturer/ Top ...

Chicago Loop Slitting Line 48″ x .040″ x 40,000Lb (A3756) 48″ x .040″ x 40,000Lb Chicago Loop Slitting Line Stock#: 19650C Make; Chicago Material Width: 12″ – 48″ Material Thickness: .005″ – .040″ Coil Weight: 40,000lb Coil ID: 20″ Coil OD: 72″ Speed: 1500 feet per minute Entry 4-Arm Turnstile Powered Rotation ID Protective Arms Entry L-Type Coil Car Hydraulic Lift & Traverse Self – Contained Hydraulics Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion AC Feed-Up Motor Drive Water Cooled Brake Hydraulic Peeling Table Driven Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Three (3) Slitting Heads Ejection Type Head Change Arbor Diameter: 4″ Lots of Knives & Tooling 50HP DC Motor Drive Scrap Baller AC Motor Drive Automatic Dumping Pit Cross Over Table Cascade Entry & Exit Rolls Rotary & Drag Board Tensi ...

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

General SKU012Y113 LocationBarneveld MakeAPV Chimie Equipement S.A. TypeM-40 SL No.3734 Year of construction1991, Reconditioned in 2003 by RPA Process Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialMild steel Volume250 Ltr. Motor45 KW Specified Features - Z-blade mixer Z-blade mixer(1x) Capacity400 Ltr, Useful capacity 250 Ltr Trough sizes840x700mm With covercheck With jacketcheck Max. temperature100 Degr. C. Single gearedcheck With adjustable packing glandscheck Motor45,0 KW, 380 Volt (Ex) Arm speed± 15/20 Rpm Hydraulic tiltingcheck With hydraulic unitcheck MaterialMild steel Information Floorspace2,2 x 2,8 M Total height1,8 M Weight4700 KG ATEX compatiblecheckMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsOther feedRubberZ-blade mixersAnimal feedLubricants & oleoOther che ...

General SKU012Y116 LocationBarneveld MakeAPV Chimie Equipement S.A. TypeM-40 SL No.3714 Year of construction1990, Reconditioned in 2003 by RPA Process Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialMild steel Volume250 Ltr. Motor45 KW Specified Features - Z-blade mixer MaterialMild steel Z-blade mixer(1x) Capacity400 Ltr, Useful capacity 250 Ltr Trough sizes845x700mm With covercheck With jacketcheck Single gearedcheck Motor45,0 KW, 380 Volt (Ex) Arm speed± 15,5/20,0 Rpm Hydraulic tiltingcheck With hydraulic unitcheck Motor1,5 KW, 220-240/380-415 Volt (Ex) Information Floorspace2,2 x 2,8 M Total height1,8 M Weight4600 KG ATEX compatiblecheckMinerals & inorganicPlastic & polymersDyes & pigmentsSolid pharmaceuticsOther feedRubberZ-blade mixersAnimal feedLubricants & oleoOther chemicalStarchSugarCosmeti ...

Well-maintained machine from automotive parts series production (CPK capable) with reinforced spindle drive and Fanuc 18i CNC control. Kessler spindle max. torque (25%) 392 Nm 4th NC-axis Peiseler ZAS 280 distance 980 mm Milling capacity in St 60: 700 cm3/min Drilling capacity in St 60 with HM drill: 50 mm Thread cutting: M36 HSK 63A - 20 tools Chip to chip 2.1 s Speed 8,000 rpm Rapid traverse up to 60 m/min Acceleration up to 0.7 g Knoll coolant system PF50 with scraper belt conveyor and paper belt filter Coolant through spindle 30 bar Automatic doors front spindle bearing diameter 70 mm Tool tension 8 000 N X-axis travel 800 mm Traverse path Y-axis 520 mm Feed force X -/ Y-axis 5,000 N Travel Z-axis 630 mm Feed force Z-axis 10,000 N Gyuhsc Axis acceleration X, Y-axis / Z-axis 0.5 g / 0.7 g Rapid traverse speed 60 m / min Coolant through spindle up to 30 bar � ...

BAZ Chiron FZ 12 W Used machine (untested) Control type CNC Built in 1990 Operating hours n/a Price 3,000 € net plus VAT Dimensions 2500x2500x2800 Weight 3500 kg Location Haiger Description Universal BAZ of the Chiron brand suitable for tooling, fixture construction, training and mould making Travel 550x300x425mm Control Siemens Technical data Year of construction / YOM 1990 Spindle speeds 7000rpm Steuerung Control CNC Siemens Vorschübe / Feeds 24000mm/min Tisch / Table 1000 x 500mm Tool Holder / Taper BT 30 Longitudinal Path / Travel (X,Y,Z) 550 x 300 x 425mm Machine Weight /Weight ca 3000kg Tool changer 16 Dimensions / Dimension 3000x2650x2500mm

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE Fanuc Series 18i-MB5 Operating hours: 34031 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 770 mm Table width: 290 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y-axis): 270 mm Vertical travel (z axis): 310 mm Drill capacity: 12 mm Max. taping diameter M: 8 Tool changer: Number of tools: 24 Tool diameter max.: 47 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 160 mm Max. tool-weight: 1.2 kg Time of tool changing: 0.8 / 2.3 sec Average chip-to-chip time: 2.2 sec Spindle nose: HSK-A: 40 DIN 69893 Spindle speeds: up to: 30000 rpm Rapid traverse:: 75 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 7 kW Total power required: 14 kW Various acces ...

Machine Details Stock-No. 1105-03574 Type of machine Machining Center - Vertical Make CHIRON Type FZ12 WM Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EXW -free on truck Technical details x-travel 550 mm y-travel 300 mm z-travel 425 mm tool taper SK 40 control Siemens 810 total power requirement 12 KVA weight of the machine approx. 4.0 t transport dimensions LxWxH 2,05x3,05x3,0 m Additional information chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth CONTROL SIEMENS 810 TOOLS SK 40

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 3 axles BZ CHIRON FZ 08 with FANUC 18 I M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 5 axis BZ CHIRON FZ 08 with FANUC 21 M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30 integrated with 4/5 axe peiseler SPAENEWANNE

Table length: 450 mm Table width: 300 mm Longitudinal X: 300 mm Cross Y: 250 mm Vertical Z: 250 mm Positions ATC: 12   Positions APC: 2   CNC Brand: Fanuc 3-axis CNC machine (VMC)CHIRON - FZ08W MACH-ID 7652 Make: CHIRON Type: FZ08W Control: Fanuc 21-M Year: 1998 Pallet changer 2 tables 450 x 300 x 75 Kg Workpiece rotation station 180 Gr Large Tooling package HSK-32 Coolant system 100 Liter X - Travel:              300mm Y - Travel:              250mm Z - Travel:              250mm Table Length:            450mm Table Width:             300mm Table load:              75 Feed rate X-Axis:        40000mm/min. Feed rate Y-Axis:    &nbs ...

Metal detector Chinese manufacturer Condition: Mint Band width: 30cm with extra treadmill new BDA unfortunately only in Chinese Dimensions: Height: 110cm Width: 130cm Depth: 90cm

Chiron FZ08KW MAG Vertical Machining Center With 4th Axis Siemens 840D Control Unit 15 000 rpm Double table Double dividing head(Peiseler) Renishaw probe All maintenance has been done Chiron Turkey

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)

Chiller Green Box Multi 156A 2006 year probably damaged evaporator // controller - o.k. // three compressors - o.k. // one compressor probably dameged Weight - 4000 kg

- Pneumatic Nietzange Model CP 0351 ESVEL Compression Riveter by Chicago Pneumatic Used

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Machine details Bearing number 1105-03038 Machine type Machining Center - Vertical Make CHIRON Type FZ12 WM Built in 1997 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time immediately Freight base freely loaded from location Technical details x-path 550 mm y-path 300 mm z-way 425 mm Tool holder SK 40 Control Siemens 810 Total power requirement 12 KVA Machine weight approx. 4.0 t Transport dimensions LxWxH 2.05x3.05x3.0 m Information Machine is located in the technical GOOD CONDITION with interchangeable plate 2 X 4th axis PEISELET PT 160 WITH SIEMENS 810 WITH HYDROLIC CLAMPING IN THE TABLE 24 FACH WERCKZEUGWECHSLER

Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Twin pallet vertical machining center CHIRON FZ15KW Highspeed Spindle 12000 RPM Rapids asse Z 60m/min 2005 Pallet 2 x 660 x 400 mm X 550 Y 400 Z 360 coolant through spindle 48 tools HSK63 swarf conveyor CNC Siemens 840D This Machine can be inspected and tested under power in our warehouse in Gussago BS Italy

Table length: 850 mm Table width: 470 mm Longitudinal X: 630 mm Cross Y: 400 mm Vertical Z: 425 mm Positions ATC: 20   Positions APC: 0   CNC Brand: _Unknown / Other MACH-id    5417 MAKE        CHIRON TYPE          FZ 18 W MAGNUM high speed YOP            1997 SPECIFICATIONS X - Travel        630 mm Y - Travel        400 mm Z - Travel        425 mm Table Length     850 mm Table Width      470 mm Table load          250 Kg Feed rate X-Axis       30.000 mm/min. Feed rate Y-Axis         30.000 mm/min. Feed rate Z-Axis         30.000 mm/min. Spindle Taper         40 ISO/ ...

Table length: 950 mm Table width: 360 mm Longitudinal X: 550 mm Cross Y: 300 mm Vertical Z: 280 mm Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: OM MACH-id   3684 MAKE    Chiron TYPE   FZ 12 S YEAR    1993 SPECIFICATIONS X - Travel    550 mm Y - Travel    300 mm Z - Travel     280 mm bed / plano / portal / moving column   vertical machingcentre Controll    FANUC OM Table Length x Width    950 x 360 mm Table load in kG    250 Kg Spindle Taper    Sk 40  kW power on spindle   5.5 kW Spindle speeds / ranges   7100 Rpm ATC tool changer   12 ? DIMENSIONS Length   2920 mm Width    2400 mm Height   2680 mm

CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 810 M Operating hours: 15198 Technical data Number of axis total: 3 Table length: 2280 mm Table width: 450 mm Number of T-channels: 3 Distance of the T-slots: 150 mm T-channel width: 18 mm Longitudinal travel (X-axis): 2000 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 425 mm Tool changer: Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 220 mm Max. tool-weight: 8 kg Spindle nose SK: 40 DIN 69871 Vertical spindle speeds: stepless from: 20 rpm up to: 10500 rpm Feeds: Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 18 kW Total power required: 31 kVA Machine´s weight about: 7200 kg Overall dimensions machine: Length: ...

Chiron FZ15KS HIGH SPEED Vertical Machining Center Technical data: Travel x: 550mm y: 400mm z: 360mm 4th axis original direction finder CNC Siemens 840D Table working area 1050 x 450mm Tool changer 48x tool holder SK 40 Speed range up to 12000 1/min With 4th axis Renishaw tool breakage monitoring IKZ Spaenefoerderer The machine is in our warehouse, under power Mimu Machine Tools (Italy), X: 550mm, Y: 400mm, Z: 360mm, 4th axis: 360.000 pos, Renishaw: Yes

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

Chilworth JCI 164 High Voltage Adapter General description The JCI 146 is a voltmeter adapter component designed for integration into wider experimental systems. In combination with our JCI 140, the system enables the measurement of live conductors with voltages up to ± 60 kV DC by direct connection with an accuracy of ± 2% (nominal) with minimal load effects on the device under test. The JCI 146's high input impedance and low capacitance are suitable for more accurate DC voltage measurements. Other traditional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often provide inaccurate results due to load effects caused by the measurement setup. This device can be used to cross-check the calibration and accuracy of high-voltage sources by power utilities, calibration test houses and cable manufacture ...

Vertical machining center make CHIRON type FZ 12 S high speedFabr. -No: 114-30 built in 2000X-way: 550 mmY-way: 300 mmZ-way: 425 mmTable size: 950 x 350 mmMax. Table load: 500 kgRapid traverse speed: 40000 mm / minTool change device: 12 Pos.Spindle mount: ISO 30Spindle speeds: 20 - 10500 rpmSpindle drive motor: 5.5 kWTotal power requirement: 15 kVAWeight approx: 3590 kgDimensions approx: 2000 x 3000 x 2500 mmWith- Coolant device- Chip conveyor- Control Siemens Sinumerikused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Details Warehouse number 1105-03698 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 15 K S 5 AXIS Year of construction 2001 Control type CNC Control HEIDENHAIN TMC 530 Storage location FRANCE Country of origin france Delivery time ready for shipment Freight base EX WORK Price Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm Control HEIDENHAIN TMC 530 Table clamping surface 600 X 350 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the vord. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Distance spindle/ ...

Chiron DZ 18 W Magnum Vertical Machining Center Double table Double spindle Machine is in good working condition

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

Press mould Box (China) 600400260/220 with Drawer Spare Parts 600400160

Oil / water centrifuge Manufacture of China HEITON R.v. 6. 2021 equipment: Automatic, with 55KW heating with SIEMENS PC Output 3000L / hour New

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Machine Details Stock number 1105-03839 Machine type machining center - vertical Brand CHIRON Type FZ 15 W Year of construction 2004 Control type CNC SIEM 840D controller Storage location FRANCE Country of origin france Delivery time ready for shipment Freight Base EX WORK Technical details x-travel 550 mm y-travel 400 mm z-travel 425 mm SIEM 840D controller Table clamping surface 2x 660 x 400 mm Tool holder ISO SK 40 Spindle speeds - infinitely variable 20 - 12,000 rpm Feed infinitely variable 0 - 60,000 mm/min Rapid traverse 60 m/min Feed force X/Y-axis 5,000 N Feed force Z-axis 10,000 N Tool magazine: 20 Tool diameter max. 65 mm Tool diameter with 2 free spaces 150 mm Tool length - max. 220 mm Spindle diameter in the front. Bearing 70 mm Torque at the spindle max. 180 Nm Distance spindle/table 280 - 705 mm Spindle/stand distance 480 mm Milling capacit ...

This CHIRON FZ15W Vertical Machining center was manufactured in the year 2001. It is equipped with a Siemens SINUMERIK 840D control unit and has 3 axis. There are 2 units available.

This CHIRON MILL 2000 Vertical Machining centre was manufactured in the year 2005 in Germany. Contact us anytime for further questions.

This Chiron FZ18 Vertical Machining center was manufactured in the year 1995 in Germany. It is equipped with a SIEMENS SINUMERIK 810M control unit and has 4 axis.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This CHIRON MILL 800 Vertical Machining center was manufactured in the year 2015 in Germany. It is equipped with a SIEMENS SINUMERIK control unit and has 5 axis.