cheese packing used for sale

cheese press stainless steel very good condition, been apparently very little used for sliced cheese such as Gouda designed for various sizes approx. 1 kg - 8 kg Special cheese sizes are possible by simple modification

CHEESE PORTION CUTTING MACHINE SLICING MACHINE AGED CHEESES GOUDA, EDAM, MIMOLETTE, CHEDDAR AND MANY KINDS WITH PLC CONTROL AND HMI OPERATOR PANEL COMPLETE STAINLESS STEEL THICKNESS IS ADJUSTABLE

Used press for pre-pressing cheese. Technical data: - producer TEWES BIS Barczewo - year of production 2006 - dimensions: overall length 4780 mm, width 1560 mm, height 3850 mm - pressing area 4.33 m3 - internal dimensions of the bath: length 3700 mm, width 1170 mm, depth 730 mm - mass of pressed cheese approx. 1000 kg - thickness of the cheese layer after pressing approx. 250 mm

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Boska Cheese cutter Stainless manual cheese cutter, cuts into segments with wire cut, tabletop

GROTE 613-VS2 SLICER WITH 18 PRODUCT HOLDERS (MOST NEVER BEEN USED) AND EXTRA REPLACEMENT PARTS-> 2 PULLYS, PUMP, SEAL, BEARING, BLADE, PULLY HUB ALONG WITH A BOX OF 25 ACCUBAND BLADES. THIS SLICER SHOWS LIKE NEW

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Used 3-station turbine packing machine. Dose range 5-50 kg, has a pickup conveyor and a bag-forming conveyor. YOM 90's.

Used line for packing powdered products Chronos. Powdered products are packed in four-layer paper bags with a polyethylene insert of 25 kg net or BIG-BAG containers with a capacity of max 1000 kg. Packing in 25 kg bags takes place on an automatic Chronos packing machine. The packing machine automatically weighs, seals the polyethylene bag and seals the paper bag.

For sale, completely overhauled flour packaging machine 1kg. The machine includes a auger feeder with a mixer as well as an automatic gluer. Capacity approx. 1t per hour (20kg/min).

⦁ Station No. 1 Charger for cardboard packaging with packaging remover from the charger ⦁ Station No. 2 Box former ⦁ Station No. 3 Station for inserting products ⦁ Station No. 4 System of closing boxes with sticky hot glue ⦁ Station No. 5 Closing the box ⦁ Station No. 6 Exit conveyor -The system of closing the box with hot glue is carried out using the device of the Italian manufacturer "Preo".

FULL POWDER FILLING AND PACKAGING LINE COMPLETE WITH ALL CONVEYORING, GENERATORS AND 4 PALLETS WORTH OF SPARES. USED FOR POWDERED SUGAR AND FLOUR CONSISTING OF: CARTON ERECTING MACHINE TO POWDER FILLING MACHINE TO CHECK WEIGHER TO CARTON SEAL MACHINE TO LID APPLICATION MACHINE PLEASE CONTACT FOR MORE INFORMATION

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

In stock first week of September

General SKU366W1282 LocationBarneveld MakeSchott Engineering No.k06298-300 Year of construction1997 Pressure Working pressure1 Bar Technical specs Max. temperature150 °C Specified Features - Distillation Distillation installationcheck Capacity770 l. Column sizesdia. 400x4200 mm Number of columns:1 Max. temperature150°C MaterialGlass Information Total height4,20 m Floorspace0,55x0,55 m Extra SpecificationsPacking type Durapack prototype :DistillationSchottColumns > DistillationBrand > Schott What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-200 Technical features Output: up to 200 cans/minute Recommended output: 150 to 180 cans/minute (according the can type) Format: diameter 83,7 mm Cans height: 25-62 mm

CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Fully automatic wrapping machine with innovative sealing unit with automatic spindle locking, for secondary packaging of products using polyethylene film. Modular configuration for integration with other machines and systems, with ergonomic balcony technology for quick format changeover. Ideal for industrial applications that require efficiency, accuracy and adaptability. Built in 2015. CHARACTERISTICS - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm ENERGY ...

Used packaging machine for cottage cheese, type: XPG-40. New: 2018 Technical specifications: Capacity: up to 90 packs/min Power: 2.2 kW Dimensions: 3030 x 2700 x 1800 Weight: 1600 kg On an inverter with smooth speed control and a photocell, after a complete overhaul - like new. Almost unused. Packed cottage cheese. No conveyor. Packed.

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel

Used pneumatic press for cheese made by Spomasz Rzeszow. New 2006. Available 2 pcs.

Height 1350 Width 1700 mm Length 700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Chamber dimentions 500 mm

Alpa Coagulator Soft Cheese Making Plant The Alpma system is built in 1992 and consists of the following plant sections Year of Make:1992 in operation until 2007 Manufacturer:Alpma Products: Feta cheese, Cammenbert cheese, Brie White Mold Cheese Hourly output 10,000 to 12000 litres per hour of milk supply The following accessories are included in the scope of delivery and plant components such as - Portioner TR. - Battery for feta cheese, Camembert diameter 86 mm - Battery for feta cheese, Camembert diameter 60 mm - Battery for Brie Soft Cheese - Horde tracks - Stackers for block moulds - Turner – Stacking track - Cross conveyor stack / drainer - Wender I - 4-lane drainer - Turner II - Cross conveyor stack / drainer - Intermediate railway to the Aushordun - Destacker for block molds - Umhordungsanlage / ziehanlage Type KZ - Dry salt plant - Tray S ...

Finova Portioning & Packaging Line A fully integrated, factory-crated Finova portioning and packaging line designed for precision cheese processing. Built in 2022, this unused system combines cutting-edge technology for cutting, X-ray inspection, weighing, MAP flow pack wrapping, and gas control in a compact, ready-to-deploy format. System Overview Subsystem Manufacturer Description Primary Cutter Finova Cuts 200x600x900 mm or 100x300x500 mm cheese blocks into logs/portions Disassembly & Alignment Finova Converts bars to individual format, aligns for X-ray X-ray & Calibration Finova Inline scanning, volumetric calibration, weight-targeted cut logic Weight Check & Reject Finova Weight verification with automated reject for non-conforming products Portion Cutter Finova Servo-controlled, programmable vertica ...

Used complete production line for yellow cheese, made by TEWES-BIS Poland. New 2019. Production line for yellow cheese, e.g. Gouda, Edam, Dutch type. Daily capacity: Processing up to 180,000 litres of milk per day. TECHNOLOGICAL SPECIFICATION (MAIN MODULES): Section 1: Preparation of cheese milk: o Milk repasteuriser with a capacity of 15 m³/h. Section 2: Preparation of cheese curds: o Cheese boiler with a capacity of 12 m³. o Hot water generator for boilers. o Process water pasteuriser (5 m³/h) with a 10 m³ tank. o Set of process pumps (whey, curd) with a capacity of 25 m³/h each. Section 3: Cheese room – Moulding and pressing: o Curd buffer tank (10 m³) with pump. o Under-mould forming device (UFP) for Dutch cheese. o Complete mould circuit (300x500x100) with cover applicator and remover. o Final pressing system: 144 pressing points. o Tunnel mould washe ...

Auction-ID: A1-41275-195

G. Mondini S.p.a. cheese spreader, model: DTT/0-80, serial number: 2096-02/1, year of construction: 09-07-2002, 400 V, 3 Ph, 50 Hz, dimensions: 1580 mm x 1030 mm x 2030 mm.

G. Mondini S.p.a. cheese spreader, model: DTT/LC-80, serial number: 1477/98, year of construction: 20/10/98, 400 V, 3 Ph, 50 Hz, dimensions: 1100 mm x 1800 mm x 2050 mm.

Used Alpma Basic SC hard cheese slicer. New 2014.

Cavecchi Pulitrice F Cheese cleaning machine Serial: 51 2004, cheese cleaning machine, side and bottom brushes, 3Ph

Horizontal Käde packaging machine

For sale are used KALT cheese vats: Manufacturer: KALT Year of construction: 2001 and 2004 Design: closed, double-O Material: Exterior: Stainless steel (V2A) Inside: Copper Includes control cabinet and Siemens HMI (touch panel)

Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.

Used flowpack by FUJI type FW3700. New 2003. Machine for packing stacks of melted cheese slices into flow-packs. Including reseal-it system type RAD- FF-450, series FF0304-59, year 2003. Machine capacity: - up to 125 packs/minute

Used packaging machine by Roboxis type SP-04. New 2009. Complete Roboxis machine, mixing four different flavours of triangular forms of product, stacked 8 per disc. Technical data: Capacity : up to 25 boxes / minute Box type : 4 different flavours 8/8 boxes, 140 - 250 grams or 3 different flavours 6/6 boxes, 140 - 250 grams Power : 10 kW, 400 V, 50 Hz Dimensions (L x W x H) : +/- 5.00 x 4.00 x 2.80 mtr. Weight : +/- 2,200 kg Compressed air: pressure 8 bar, air consumption 60 m³/h

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

H.Biaugeaud A404 HB Cheese grater Stainless, previously used for grating cheese, two grating attachments, mobile, 3Ph

Used cheese packaging line made by CRYOVAC. New: 2004. The line includes: 1)BL60 bagging machine (CRYOVAC, 2004) TECHNICAL DATA: - Weight: 600 kg - Consumption: Compressed air (pressure 6 bar, 30-40 m3/h) - Electricity: 380V, 50Hz, 3F + ground - Installed power: 1kW - Operating conditions: Bag dimensions: Width: min. 130mm - max. 450mm Length: min. 300mm - max. 650mm - Maximum dimensions of product: Height: min. 40mm - max. 220mm Width: min. 50mm - max. 260mm Length: min. 150mm - max. 425mm Weight: 8 kg Cycles per minute: 20 Number of employees: 1 (employee to change bags, products and general inspection) 2) Vacuum packaging machine VR8610 FUROCAVA (CRYOVAC, 2004) TECHNICAL CHARACTERISTICS: - 4 rotary chambers for continuous flow of products at different speeds - Flow of products of different forms and dimensions, is carried out quickly and without use of s ...

NNP Cheese block cutter Stainless, pneumatic cheese block cutter with stainless outfeed conveyor, max block 350mm w x 200mm h,

Stock number: D840, Cheese drainer, stainless steel,, RV. Teknik., Conveyor with drain L 1000 x B 380 mm., Top cylinder driven for pressure, of moulds., Max H 350 mm., Material: Stainless steel AISI 304

Stock number: D747, Cheese washer machine, stainless steel,, B. Christensen,, standing on legs with wheels., Brush width: 350 mm., 0,37 kW motor, beltdrive., Material: Stainless steel AISI 304

Stock number: D567, Cheese washing machine, stainless steel,, APV typr OVO., Brush width 410 mm., Excl. renovation., Material: Stainless steel AISI 304

650 litre, Stock number: T2812, Litre: 650, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Cheese vat, Double jacket: Yes, Agitator: From bridge in the top, Manufacturer: Alfa Laval, Other: Miscellaneous tools

Used K2M 550 cheese block divider with receiving buffer from Kazbi. Details: K2M 550 portion cutting device. Output product: cheese blocks Length: approx. 500 mm Width: approx. 300 mm Height: approx. 100 mm. Final product: Division into 5: 300x100x100 mm Division into 3: 500x100x100 mm Division into 6: 250x100x100 mm Edge bands with leftover trimming. Functional description: Cheese blocks are placed manually on a driven inlet belt and pushed onto a ramp. The ramp is placed in a horizontal position and the block is centered by a system of lateral pressures. The ram is automatically moved and the block is cut into the appropriate number of bars towards the long side. After cutting is finished, the ram is withdrawn and the ramp is raised to accept the next block. The cut bars go to the second cutting section. If we need to cut the block or long ribbons crosswise, the  ...

150 litre, Stock number: T2299, Litre: 150, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese vat, Standing: In rack with tilt, Double jacket: Yes, Agitator: Yes, Dimensions: Tub: L 550 x W 900 x D 430 mm., Outer dimensions: L 1250 x W 1300 x H 1360 mm., Manufacturer: Paasch Silkeborg, Other: Variable speed, water heater and 35 l. flux vat

15.000 litre, Stock number: T1579, Cheese vat, stainless steel,, closed, standing on legs., Double jacket., Insulated., Outside fully welded stainless cladding., Double-acting framed agitator from the top., Alfa Laval, Ø 2900 mm., Litre: 15.000, Material: Stainless steel AISI 304

Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used

This plant is a small scale Cheese Facility that consists :, SMI Packer, 2 x Vacuum Cheese Packer, Cheese Cutter, Butter Churn 100 litres, Pasteuriser for 1000 litres per hour, Lobe Pump, Cheese Press, Work Tables Stainless steel, Cheese moulds, Cheese Vat with Planetary Cutters, Cheese Tables, Cheese Shelf’s, Fridges, Sale Point Fridges, The plant is sold as seen in good condition, contact us for a quote for this plant .

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 600 kg,

DOMA-T Cheese Slicer KT 3 BOX Knife for 4 parts Machine for wheels with a diameter of up to 42cm Loaves are pushed upwards by the knife and pieces can then be easily removed from the machine surface Two-handed operation Machine must be thoroughly cleaned before use Video about test run available