channel used for sale

Maximum pressure: 50 tons Pressing force: 5.2 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 7.5 kW Year of construction: 2000-2001 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1998 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Description MOOG ZEUS IMI220-D001 16-channel temperature control board used - from disassembly

Maximum pressure: 16 tons Pressing force: 2.08 kg/cm² Bale size: 1100x700x950 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Self-priming side channel pump capable of handling gas along with the medium and operates at a low noise level.

Min. output: 20t/h, wear plates: 13x Pos. 3, 14x Pos. 9, 20x 325x250mm, 28x 120x160mm, 18x 250x250mm, 23x 150x380mm, with blow bars, jaws, metering channel and 4x set screws with collar.

Maximum pressure: 5 tons Pressing force: 2.17 kg/cm² Bale size: 590 x 390 x 485 mm Bale weight: approx. 25 - 35 kg Power supply: 400V / 2.2 kW Year of construction: 2003 Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

System includes receiver tank, agitator, expansion tank, sealing water tank, equalising tank, centrifugal pump, side channel pump, vacuum liquid ring pump, tubular heat exchanger, condenser, plate cooler, sight glasses, fittings, permanent magnet and filter, with documentation.

System includes receiver tank, agitator, expansion tank, sealing water tank, equalising tank, centrifugal pump, side channel pump, vacuum liquid ring pump, tubular heat exchanger, condenser, plate cooler, sight glasses, fittings and permanent magnet, with documentation.

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

Specifications Cutting length 3200 mm Cutting width (program slide travel) 2200 mm 3 air cushion tables 1835 x 645 mm Saw blade protrusion 62 mm Saw carriage feed: forward 6-32 m/min backwards constant 32 m/min Program slider speed: forward 12 m/min backwards 12 m/min Angle rearing device on one side (semi-automatic) min. pressure width 100 mm pressure width 1300 mm Main saw motor 5.5 kW Vorritzsägemotor 0,55 kW Stops swivel 5 pieces Coated front tables 1750 x 400 mm 1 piece (manual measuring stop/extendable) Coated front tables 1000 x 400 mm 2 pieces (fixed) Working height 900 mm Main saw blade 300 x 4.4 x 75 mm Scribbling saw blade 150 x 4.4 - 5.6 x 45 mm Compressed air 6 bar Operating voltage 380 V / 50 Hz Minimum suction speed at the suction nozzle approx. 25 m/sec Suction connection chip channel 1 piece 180 mm Suction connection pressure beam 1 piece 120  ...

Use for containers [cm] 140 x 90 x ok. 130 cm Price: on request Power supply: 380V Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data Clamping surface: Diameter: 350 mm Number of T-channels: 4 T-channel width: 14H7 mm

System includes receiver tank with agitator, extractor, centrifugal pump, seal water tank, side channel pump, corner pipe strainer eluate line, corner pipe strainer condenser, vacuum unit, heat exchanger, condenser, conveyor unit V 3811 and 3811, sight glasses and fittings, with documentation.

Maximum load capacity: 800 kg Suspension class: - Adjustment range: 400-1420 mm Price: on request Year of construction 1999 We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data Rotary table Clamping surface: Diameter: 200 mm Number of T-channels: 3 T-channel width: 10 mm Machine´s weight about: 40 kg Dimensions: Length: 400 mm Width: 330 mm Height: 100 mm

Blister machine Manufacturer Uhlmann Type UPS 1070 Power 15 – 200/cycle min. Film width min. 150 mm – max. 300 mm including color and filling material control, scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome

Technical data Rotary table Clamping surface: Diameter: 320 mm Number of T-channels: 6 T-channel width: 14 mm Dimensions: Length: 450 mm Width: 400 mm Height: 150 mm

Technical data Rotary table Horizontal/vertical Clamping surface: Diameter: 320 mm Table load max.: 250 kg Number of T-channels: 4 T-channel width: 14H7 mm Weight: 80 kg Dimensions: Length: 650 mm Width: 450 mm Height: 150 mm Various accessories: Digital readout number of axis:: 1 Fine feed

Technical data Rotary table Clamping surface: Diameter: 480 mm Number of T-channels: 6 T-channel width: 16H7 mm Dimensions: Length: 800 mm Width: 600 mm Height: 160 mm

Technical data Rotary table Execution: Horizontal/vertical Clamping surface: Diameter: 400 mm Number of T-channels: 6 T-channel width: 14H7 mm Machine´s weight about: 154 kg Dimensions: Length: 514 mm Width: 550 mm Height: 310 mm

Technical data Rotary table Clamping surface: Diameter: 400 mm Number of T-channels: 6 T-channel width: 14H7 mm Machine´s weight about: 40 kg Dimensions: Length: 600 mm Width: 500 mm Height: 220 mm

Technical data Rotary table Execution: Swivel table Clamping surface: Diameter: 320 mm Table height: 150 mm Number of T-channels: 4 T-channel width: 14H7 mm Machine´s weight about: 40 kg Dimensions: Length: 500 mm Width: 400 mm Height: 200 mm

Technical data Table length: 1250 mm Table width: 240 mm Number of T-channels: 3 T-channel width: 14H7 mm Distance of the T-slots: 80 mm Clamping surface Length: 1250 mm Width: 240 mm Grinding length: 1200 mm Grinding width: 370 mm Execution: with automatic cycle Max. distance from table to spindle-centreline: 130 - 600 mm Longitudinal travel (X-axis): 1330 mm Transversal travel (y axis): 270 mm Table speeds: stepless from: 3 m/min up to: 30 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds: up to: 2180 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3700 mm Width: 1750 mm Height: 2450 mm Dimensions electric cabinet: Length: 1750 mm Width: 500 mm Height: 2000 mm Various accessories: Magnetic plate: Length: 700 mm Width: 200 mm Crushing profiling device Too ...

Technical data Cross table Execution: Horizontal Clamping surface: Length: 270 mm Width: 175 mm Travels: longitudinal: 120 mm Crosswise: 120 mm Number of T-channels: 4 T-channel width: 10H7 mm Dimensions: Length: 350 mm Width: 250 mm Height: 200 mm

Specifications Power supply: 400V/50Hz 7.5 kW Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Technical data Rotary table Execution: Horizontal Clamping surface: Diameter: 300 mm Table height: 149 mm Table load max.: 80 kg Number of T-channels: 8 T-channel width: 10 mm Machine´s weight about: 80.0 kg Dimensions: Length: 510 mm Width: 320 mm Height: 150 mm Various accessories: Splash guard

2-way geared in-line drilling machine make WEBO type Varia 20Fabr. -No: 20/14/1 and 20/13/6Technical specifications:Drilling capacity approx. 30 mmSpindle mount: MK 330 spindle speeds: 103 - 1450 rpmDistance spindle nose table: 100 - 600 mmProjection: 260 mmSpindle stroke: 150 mmFeeds: 0.1 - 0.3 mm / rev:Table size with / without channel: 100 x 500/800 x 350 mmT-slots in the table: 18 mmExternal dimensions L x W x H: 1000 x 900 x 2600 mmWeight approx: 1800 kgWith- Right-left run- Table height adjustable via crank- Drill heads height adjustable via crankused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data Cross table Execution: Horizontal Clamping surface: Length: 350 mm Width: 260 mm Travels: longitudinal: 250 mm Crosswise: 250 mm Table height: 182 mm Number of T-channels: 5 T-channel width: 14H7 mm Machine´s weight about: 80 kg Dimensions: Length: 400 mm Width: 300 mm Height: 200 mm

Hydraulic articulated spindle drilling machine make WÖLFEL type GBK 20Fabr. -No: 102028, built in 1975Technical specifications:Number of articulated spindles: 4 pieces18 spindle speeds: 75 - 1600 rpmTable size with channel: 800 x 660 mmTable adjustment via: hand crankHeight adjustment of the drilling head: hydraulicDrive power: 3.3 / 4.4 kWExternal dimensions of the machine: 800 x 1150 x 2900 mmWeight approx: 2000 kgWith- separate control cabinet 1000 x 550 x 1150 mm- separate hydraulic 700 x 400 x 1050 mm- Central lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

machine measurements: Länge ca. 21.000 mm machine weight: -- kg power capacity: 200 kW Condition: used, Specification: 21m post-heating duct with heat exchanger - length approx.: 21.000 mm - consisting of: 21.000 mm heating channel, incl. heat exchanger - extrusion height: 1.100 mm - Extrusion direction: from right to left - 4x burners with 50kW burner each - Tempering range: 240°C - 340°C - Heating: gas heated - Control system: Siemens Heating duct extension by 2x 3m, 2015 - The duct was extended by 2x 3m segments in 2016 - The burners of the 21,000 mm system were renewed in 2015 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mm machine weight: -- kg power capacity: 170 kW Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was  ...

Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage