514 offers channel

Category: 303: blow moulding machines
approved
dealer
New in: new
Price: request quote
Location: Land-it IT 44100 Ferrara
Seller: STOCKEUROSTOCK SRL

Blow molding machines make SIDEL mod. SBO 16 molds. Nominal producing capacity: 24,000 bottles per hour. Chiller, hopper, preform tilter and preform descent channel + 1.5 Lt complete mould set. As optional: high pressure 40 bar compressor You can buy this machine revamped (if requested) in order to increase production capacity. Machine is visible operating.

Category: 706: beverage machines
approved
dealer
New in: 2014
Price: request quote
Location: Land-de DE
Seller: Seegräber GmbH

The Chilly MAX unit has a compact design. It takes little space and is very easy to install and to start-up. The units are mobile on wheels. The same as the Chilly shelf-top units, the Chilly MAX is equipped with a with a hermetically closed motor compressor and with a complete cooling water circuit containing stainless steel water tank and centrifugal pump. Also, they contain an additional heater which is integrated inside a stainless steel water-tank. The Chilly MAX series is equipped with a micro-channel condenser which enables even more efficient heat-transfer. The ventilator is mounted on the top part of the unit, so the unit can be placed near a wall with any side facing it. The side- ...

Category: 201: saws
approved
dealer
New in: 2014
Price: request quote
Location: Land-de DE 01665 Klipphausen
Seller: Höchsmann GmbH

Technical data Cutting width mm 165 Cutting height mm 245 Principle thin-cutting gate Lamella thickness min mm 1.5 Cutting joint min mm 0.9 Input length min mm 155 Stroke number strokes/min 450 Main motor kW 15 Feed max m/min 2 Feed Continuous Yes Cracking saver Yes Weight approx. kg 2500 Availability Stock D-01665 Klipphausen Operational readiness ready for use/can be presented Condition good Description motorized machine part opening for easy and fast Saw frame change Leaf cooling by means of compressed air Channel slope

Category: 103: milling machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: DMG MORI Used Machines GmbH

GeneralHorizontal Machining Centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal730 mmCross880 mmVertical730 mmTool magazineApplication HorizontalType of gripper Double gripperNumber of tools 40CabineFull protection cabinMotor spindle, 20.000 min-1, 130 Nm, 35 kWMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Spindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle an ...

Category: 107: sheet metal working
New in: new
Price: request quote
Location: Land-de DE 64331 Weiterstadt
Seller: Felderer AG

Well preserved, complete and fully functional. For the simultaneous manufacture and closing of a channel fold. 1-man operation. Predecessor of the current model R.A.S. DuctZipper. Technical data: â?¢ Power 1.0 mm. â?¢ Weight 530 kg 46 sheet metal processing machines for the production of angular and round air ducts, e.g. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Alfa Laval, Nevers, Type 222-SA, No 17232, New 1990, Tube material Stainless steel 1.4404 (316L), Heat exchanger /Spiral heat exchanger (1x), Heating surface 2,36 M2, Working pressure tubes 6 bar, Test pressure tubes 9 bar, Max. temperature 200 Degr. C., Shell diameter /Cylindrical height 200mm, Shell length /Cylindrical diameter 355mm, Floorspace 0,7x0,5 M, Total height 0,8 M, Weight 90 KG, Extra Specifications - Channel A= 40 Ltr, Channel B= 8 LtrHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

Category: 107: sheet metal working
New in: 2000
Price: request quote
Location: Land-de DE 85622 Feldkirchen
Seller: Felderer AG

Canal road used for the production of angular air ducts, little used in very good condition, fully functional â?¢ Easy loading of new coils â?¢ Fully automatic sheet metal change in the shortest possible time â?¢ gentle processing of sensitive sheets â?¢ flat, burr-free and marking-free cuts â?¢ uniform and shapely stiffening â?¢ Time-optimized processing of customer orders â?¢ cost-effective production of standard channels â?¢ simplest programming of the system â?¢ One-man operation Specifications / Equipment: â?¢ Usable width max. 1500 mm â?¢ 3 separate  ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Alfa Laval Thermal Nevers, Type Spiral Heat Exchanger 111 S, No 19130, New 1992, Tube material Stainless steel 1.4571 (316Ti), Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 27/30 Ltr (Channel A/B), Working pressure tubes 5 bar, Test pressure tubes 6,5 bar, Max. temperature 200 Degr. C., Floorspace 0,9x0,6 M, Total height 0,8 M, Weight 300 KGHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 404: carton packaging machines
approved
dealer
New in: 2007
Price: request quote
Location: Land-de DE 27283 Verden, Leinestr. 5
Seller: Borchers Industrieservice

Top preserved trayformer, with Nordson Pro 6 channel glue melting machine, Adaptable to trays up to 50 cm. Complete with control cabinet. Very clean new machine. See Youtube Video

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Alfa Laval Thermal Nevers, Type Spiral Heat Exchanger 111 S, No 18855, New 1991, Tube material Stainless steel 1.4571 (316Ti), Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 27/30 Ltr (Channel A/B), Working pressure tubes 5 bar, Test pressure tubes 6,5 bar, Max. temperature 200 Degr. C., Floorspace 0,9x0,6 M, Total height 0,8 M, Weight 300 KGHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 1401: shelves
approved
dealer
New in: 2014
Price: 12.950 €
Location: Land-de DE 71272 Renningen
Seller: Alexander von Westernhagen

Pallets - continuous shelf for 120 Euro pallets, 1,000kg / pallet - used -: Price from location: only 12,950.-â?¬ (net) dismantled, packaged and loaded. Manufacturer: Fritz Schäfer GmbH Type: Shelf type: Pallets - Continuous shelf Kom-.Nr.: 1890588 Shelving system: PR 600 Column profile: P100/100/2.5 Built: 2014 Strands: Number of strands: 3 x 5 Number of storage levels: 5 Lowest height: currently 1,640mm Dimensions of strands: 1,000 cm x 95cm x 95cm (or 130cm lower strands) 8 pallets are max. For pallet dimensions: 120cm x 80cm Minimum weight of pallets: 400 kg Maximum weight of pallets: 1,000 kg Dimensions of the system: Height: 5.640 mm (top su ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Alfa Laval Thermal Nevers, Type Spiral Heat Exchanger 111 S, No 16828, New 1988, Tube material Stainless steel 1.4571 (316Ti), Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 27/30 Ltr (Channel A/B), Working pressure tubes 5 bar, Test pressure tubes 6,5 bar, Max. temperature 200 Degr. C., Floorspace 0,9x0,6 M, Total height 0,8 M, Weight 300 KGHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 308: other machines for plastic
approved
dealer
New in: 2009
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

Macpresse Baler MAC 102 Year of construction 2009 Operation hours 25882 h Press power 60 t Drive power 22 kW System voltage 400 V / 50 Hz Feed channel 1350 x 750 mm Bale size 800 x 800 mm (h x w) Materials PET, OCC, mix paper Throughput rate PET 25/30 kg/m³ approx. 2 t/h OCC 70/80 kg/m³ approx. 4 t/h Mix paper 100/120 kg/m³ approx. 6 t/h Tying system 4-fold horizontal , automatically Transport dimensions press approx 7.980 x 2.000 x 2.100 mm (l x w x h) Press weight approx 11.500 kg Video available

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Carl Canzler GmbH & Co. Düren, Type Spiral heat exchanger, No 5913, New 1986, Tube material Stainless steel, Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 31/21 Ltr (Channel A/B), Working pressure tubes vac/3 Ltr (Inner) / 5 bar (Outer channel), Max. temperature 160 Degr. C., Floorspace 0,8x0,6 M, Total height 0,8 MHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 502: presses
approved
dealer
New in: 2009
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Presto HPK 50 BSK, No. 7, built 2009, drive power 22 kW Technical data: Manufacturer Presto Type HPK 50 BSK Built in 2009 Engine hours 10823 h Pressing force 50 t Specific pressing force 65 N/cm2 Drive power 22 kW Connected power 80 A Engine hours 12363 h Channel cross section 1100 x 700 mm Dimensions filling shaft 1050 x 1250 mm Filling volume 0.96 m3 Idle throughput 157 m3/h Cycle time 22 sec. Throughput performance at a Bulk weight of 35 kg/m3 approx. 4.4 t/h Bulk weight of 60 kg/m3 approx. 6.3 t/h Bulk weight of 100 kg/m3 approx. 9.9 t/h Bale weight Up to 500 kg, depending on the material Binding 4-fold, fully automatic Machine dimensions without hopper 6,820 x 1,9 ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Carl Canzler GmbH & Co. Düren, Type Spiral heat exchanger, No 5968, New 1986, Tube material Stainless steel, Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 31/21 Ltr (Channel A/B), Working pressure tubes vac/3 Ltr (Inner) / 5 bar (Outer channel), Max. temperature 160 Degr. C., Floorspace 0,8x0,6 M, Total height 0,8 MHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 107: sheet metal working
New in: 1996
Price: request quote
Location: Land-de DE 85622 Feldkirchen
Seller: Felderer AG

Canal road used for the production of angular air ducts, little used in very good condition, fully functional - easy loading of new coils - fully automatic sheet metal change in the shortest possible time - gentle processing of sensitive sheets - flat, burr-free and marking-free cuts - uniform and shapely stiffening - time-optimized processing of customer orders - cost-effective production of standard channels - simplest programming of the system - One-man operation Specifications / Equipment: - Usable width max. 2000 mm - 3 separate sheet metal indents, sonsor-controlled - Splitting possibility integrated - Includes 5 coil reels (each holder of 5 t steel possible) with fl ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Carl Canzler GmbH & Co. Düren, Type Spiral heat exchanger, No 5849, New 1985, Tube material Stainless steel, Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 31/21 Ltr (Channel A/B), Working pressure tubes vac/3 Ltr (Inner) / 5 bar (Outer channel), Max. temperature 160 Degr. C., Floorspace 0,8x0,6 M, Total height 0,8 MHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 502: presses
approved
dealer
New in: 1996
Price: request quote
Location: Land-pl PL 43300 Bielsko-Biala
Seller: ARTechnic

Max. pressure: 100 tons Year of production: 1996 Unit pressure: 121,2 tons/m² Number of strappings: 4 - fold vertical, Cross-section of the channel: 750 x 1100 mm Filling inlet: 1020 x 2000 mm Bale weight: 550-750 kg Weight: ca 36 tons Supply: 400 V/ 2 x45 kW Bale tying: automatic, wire Efficiency on idle: max 780 m³/ hour Efficiency under load: max 370 m³ / hour Theoretical efficiency with material in density 35 kg/m³ 13 tons/hour Theoretical efficiency with material in density 60 kg/m³ 22 tons/hour Theoretical efficiency with material in density 100 kg/m³ 35 tons/hour Englisch - Ewelina Pekala +48 696 072 985 Deutsch - Ewelina Pekala +48  ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Carl Canzler GmbH & Co. Düren, Type Spiral heat exchanger, No 5967, New 1986, Tube material Stainless steel, Heat exchanger (1x), Heating surface 4,2 m2, Tube capacity 31/21 Ltr (Channel A/B), Working pressure tubes vac/3 Ltr (Inner) / 5 bar (Outer channel), Max. temperature 160 Degr. C., Floorspace 0,8x0,6 M, Total height 0,8 MHeat exchangersHeat exchangers > Heat exchangers What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 502: presses
approved
dealer
New in: 2009
Price: request quote
Location: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Seller: RDA Recycling Machinery GmbH

Europress EP 6500 V5 H4, press force 120 t, built 2009, drive power 75 kW, only 15,334 operating hours, currently in the overhaul Technical data: Manufacturer Europress Type 6500 V5 H4 Built in 2009 Operating hours 15,334 hours, Stand Janurar Anz. pressed bales 138.097 bales, status January Pressing force Main press 120 t Specific pressing force 142 kg/cm2 Dimensions inserting shaft 1,650 x 1,100 mm Filling volume 3 m3 Filling volume / press cycle 1.58 m3 Bale dimensions 730 x 1,100 length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Connected power total 83 kW Current consumption 150 A Binding 5 times vertical, 4-fold horizontal, fully automati ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Bitterfeld-Wolfen Germany
Seller: Foeth

Make Denios, Type FAP-2,4 Premium, Material Mild steel, Extra Specifications Denios Ejector cabin for dangerous material Type FAP-2,4 Premium, built 2004, comm Nr. 1100441, with exhaust air fan manuf. by Ferrari type FR 351 N4N &D 270, 3,5 kW motor EExEIIT4, IP 55, ATEX CESI 01ATEX103, ejector fan manuf. By Klein type DNG 6-22,5 0,37 kW motor EExeIIT4, IP 55, ATEX 3205/01 exhaust air channels , back wall with filter system , exp design , dimensions: 4.130 mm wide outside, 2.300 mm inside , 2.500 mm deep outside , 2.000 mm inside , 2.735 mm height outside , 2.200 mm inside , CE EX II 3DT4 certifiedMiscellaneousMiscellaneous > Miscellaneous What you can expect from Foeth: -- Machine is in work ...

Category: 102: lathes
approved
dealer
New in: 2009
Price: request quote
Location: Land-de DE 64720 Michelstadt
Seller: Alfred Feldmann Werkzeugmaschinen

- diameter min. round: 10 mm - Diameter max. round: 80 mm - diameter hexagonal min.: 9 mm - diameter hexagon max.: 69 mm - Bar length min.: 1000 mm - Bar length max.: 3100 mm - Required straightness: 0.5 mm/m - Remaining piece length max.: 400 mm - Slide track max. 1100 mm - Air pressure min.: 5.5 bar - Air pressure max. 6 bar - Total power: 6.2 kW - Machine weight: 1500 kg - Room requirements (W x D x H): 4.6 x 1.0 x 1.6 m Details Capacity of the tank of the rod lubrication system 100 ltr Accessories Documentation, 2 boxes of various rod guide channels

Category: 1200: machines and plants for process engineering
approved
dealer
New in: used
Price: request quote
Location: Land-nl NL Barneveld The Netherlands
Seller: Foeth

Make Filtron (Pall), Type Omega 3 Micron Maxisette - Open channel, Filter /Tangential flow filtration membrane cassette, Filter surface 27 Sq Ft., Mounted on wheelsMiscellaneous filtersMiscellaneous > Miscellaneous filters What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Category: 841: paper converting: carton gluers
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 75433 Maulbronn, Maybachstr. 9
Seller: Kohler Verpackungstechnik

max. 1000 mm, min. 56 mm, longitudinal seam, folding floor, double edge, electronic top glue unit HHS X-tend, 8 channel with 3 application heads, high pressure, glue seam control for nozzle application, glue seam control for disc application, code reader, disc undergluer on the left, pre-breaker right and left, kicker, counter, vacuum feeder with vibrator, Bobst CUBE control, digital position indicators, additional medium transport top/bottom in folding, cutting orientation on the press tape, small box set, pneumatic, clocked press tape.

Category: 109: other metal working machines
approved
dealer
New in: 1990
Price: request quote
Location: Land-de DE ab Standort
Seller: Teutenberg Maschinen GmbH & Co.KG

pulling capacity: 5 t working area: 5 - 16 mm speed: max. 150 m/min HIGH SPEED COMBINED DRAWING MACHINE Manufacturer: Schumag Model: KZ RP ID Baujahr: 1990 Speed: max 150 m/min Pulling force: 5 ton Working range: round á 5â16 mm, Hex. 5â14 mm, Square 5â12 mm Machine complete with: - Pay-off - Horizontal +Vertical Pre-straightener - Shot-blaster, 3 turbine Manufacturer: Georg Fischer - Draw-bench, with push-pointer - Horizontal straightener - Vertical straightener - Non destructive testing equipment - Hydraulic impact shear - Tube way - Ripo straightening and polishing machine - Outlet channel with two-way discharge (good and bad) up to 8 m bar length - Collecting po ...

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: 1990
Price: request quote
Location: Land-de DE bak-tec-Industries
Seller: bak-tec-Industries GmbH

Nielsen Junior chocolate enrobing line - 400 mm bandwidth - full cover, - floor cover and combined floor and side cover, - chocolate pump - Single & double veil height adjustable - Radiant heater - Lattice table with 400 mm lay-up table - Speed control Stepless - The control panel above contains the electrical control of    Mesh belt, blower, dazzling wave, heating, feed pump,    Water circulation pump and thermostat, advance the temperature   the couverture can be read. The top has on 3 sides   big, removable windows. Cooling channel: - 16 meters of automatic belt control device - Cooling with compressor More information can be found in the operating instructi ...

Category: 1015: pumps
approved
dealer
New in: used
Price: request quote
Location: Land-de DE D - Nordrhein-Westfalen
Seller: Peter Jüttermann Werkzeugmaschinen

Category: 502: presses
New in: used
Price: 26.000 €
Location: Land-pl PL 86-10 Swiecie, Bydgoska 1
Seller: Semido Sp. z o.o.

Horizontal baling press - channel press - channel baler BOA 80-1 complete with foerder band. Main engine 37kW, other motors: 11kW, 3kW and 1.1kW. Dismantled

Category: 107: sheet metal working
approved
dealer
New in: 1981
Price: request quote
Location: Land-de DE Bünde bei Bielefeld
Seller: Plum & Partner Werkzeugmaschinen GmbH

pressure: 100 t punching cross-cut in cmm: -- stroke: 100 mm throat: 510 mm work height max.: 1100 mm Twist power: 31 Durchm. in 25 mm channels - flange: 100-400 mm Number of ventilators: 80-400 mm : 100-400 mm : 100-550 mm punch stroke: bei 20 mm Hub: 60 p.Min sheet thickness max.: bei Luftbiegung: 10 mm total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,7 x 0,9 x 2,3 m Electric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 301: injection moulding machines
New in: 1999
Price: request quote
Location: Land-es ES 39792 Heras/Cantabria, Pol. Industrial de Heras, Parc. 207
Seller: Udo Krichbaum TRANSITUS, S.L.

2,700 to injection moulding machine KRAUSS-MAFFEI with many valuable extras such as, sliding table for tool changes, robots, hot channel zones, cascades, etc. Screw diameter 150mm, spray volume 11,133 cm3. The machine can still be inspected in ongoing production !

Category: 207: gluespreader machines
approved
dealer
New in: 2012
Price: request quote
Location: Land-de DE
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided plant for the process of door frames Brand: IMA Type: Combima Systems/I/R75 Year: 2012 Technical data workpiece:\r\n\r\nWorkpiece length: min. 1000 mm, max. 3100 mm\r\n\r\nWorkpiece width min. 70 mm, max. 560 mm\r\n\r\nWorkpiece thickness min. 15 mm, max. 40 mm\r\n\r\n\r\n \r\n\r\n\r\nInfeed device for lengthwise processing:\r\n\r\n- Max. work speed: 30 m/min.\r\n\r\n- Min. distance between workpieces: 600 mm\r\n\r\n- Min. workpiece size: 70 x 1000 mm\r\n\r\n- Max. workpiece size: 560 x 3100 mm\r\n\r\n- Max. workpiece weight: ca. 50 kg\r\n\r\n\r\n \r\n\r\n\r\nUnits:\r\n\r\nHogging unit\r\n\r\nMotor 6,6 KW, 100 Hz\r\n\r\nIncl. frequency inverter with slow-down function\r\n\r\n\r\ ...

Category: 502: presses
approved
dealer
New in: 1995
Price: request quote
Location: Land-pl PL 43300 Bielsko-Biala, ul. Gen. St. Maczka 9
Seller: ARTechnic

Max. pressure: 78 tons Year of production: 1995 Unit pressure: 95 tons/m² Number of strappings: 5 in vertical and 3 horizontal Cross-section of the channel: 750 x 1100 mm Filling inlet: 1500 x 1100 mm Bale weight: 450-600 kg Weight: ca. 28 tons Supply: 400 V/ 55 kW main motor Bale tying: automatic, wire Englisch - Ewelina Pekala +48 696 072 985 Deutsch - Ewelina Pekala +48 696 072 985 Polnisch – Ryszard £uba +48 501 330 786 Russisch – Alina Hykava +48 795 135 939

Category: 105: saws
approved
dealer
New in: new
Price: request quote
Location: Land-de DE D - 49779 Niederlangen
Seller: Heinz Sanders GmbH

cutting diameter:300 mm saw band length:4900 mm cutting width:300 mm dimensions of saw-band:4900 x 34 x 1,1 mm capacity 90 degrees: round:300 mm capacity 90 degrees: flat:300 x 300 mm cutting speed:15 - 130 m/min power capacity:3 kW Weight of Material maxium:0,25 t dimensions of the machine ca.:1,65 x 2,5 x 1,8 m weight:2500 kg - Cut line display / crosscut laser light projects the cut line onto the saw material and displays the cut channel. The sawmill can be manually aligned for a saw cut on the score. - Microdosing Economical and clean sawing: Minimal quantity lubrication with high-performance spray oil for dry chips, without dripping. Ideal for pipes and profiles. Coolant can still be ...

Category: 701: basic foodstuffs and animal feeds machines
approved
dealer
New in: 2010
Price: 135.000 €
Location: Land-de DE Produktion place
Seller: LM Dairy Consulting GmbH

A 2 103 1 Niro spray tower system Manufacturer NIRO Height: 8,90m Width 5.99m Year of tower chamber1963 Volume:180 m3 Capacity approx. 500 kg powder /h Residual moisture: 1.0 - 10% Air flow: 24000 m3 Water evaporation 500 ltr/h Type of atomizer: Niro centrifugal atomizer Max Temp: 205°C Relief area: 2x0.84 m2 Internal fluid isity bed: 4000 m3 air flow rate 2 sight glasses installed in internal fluid bed Fine powder return can be changed to atomizer or IFB The tower chamber is equipped with two ruptured discs. Flow bed with inspection openings, tower chamber is equipped with a door. The entire drying system is explosion suppression system from Atex. The feed tran ...

Category: 2500: miscellaneous
approved
dealer
New in: used
Price: request quote
Location: Land-de DE NRW
Seller: Ingo Brötzmann Maschinen und Anlagen GmbH

- Producer WANDRES - Type Tornado Channel - Zur Montage auf einen Transport oder Schleifmaschine

Category: 502: presses
New in: 2014
Price: 29.000 €
Location: Land-de DE 76437 Rastatt, Werkstr. 6a
Seller: RH Dienstleistungen GmbH & Co.KG

Channel baling press type S-45to The plant is currently still in operation. Carpet residues are pressed at an automobile manufacturer. The system works perfectly, a visit is possible after prior consultation with us (pre-credit check). Technical data: Pressing force 450kn/45to Drive power 22 kW Wire binding horizontal, 4-fold, semi-automatic Lances in the pressing direction right Filling opening approx. in mm B= 900 L=1600 -Bale dimensions approx. in mm W 1100 x H 750 x length adjustable -Throughput in operation at 22KW up to approx. 50 cbm/h â?¢ / depending on loading -Working stroke before / back approx.30-40sec. -Lance thrust approx. 15sec. -Closing flap ...

Category: 502: presses
approved
dealer
New in: 2005
Price: request quote
Location: Land-nl NL Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBC 110 Year of construction 2005 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 cbm Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 75 kW Tying system 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight 850 up to 1.400 kg Hydralicoil 1,200 L Baler dimensions built up with hopper approx.11,750 x 2,250 x 6,690 mm (l x w x h) Transport dimensions only baler approx.11,750 x 2,250 x 3,150 mm ...

Category: 903: machines for soil cultivation, sowing and harvesting
approved
dealer
New in: 2015
Price: request quote
Location: Land-de DE Deutschland
Seller: Andreas Fabig Maschinenhandel

Grape conveyor belt: Stainless steel version with PVC support, mobile, height adjustable. Belt length: 2500 mm Strip width: 400 mm Capacity: 1 - 7 t/h Grape sorting belt: Stainless steel version with PVC support, mobile, height-adjustable With collecting tray, separation channels Capacity: 2 - 10 t/h

Category: 502: presses
approved
dealer
New in: 1997
Price: request quote
Location: Land-nl NL Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baling press Manufacturer Avermann Typ AVOS BP 1411-45-80 Year of construction 1997 Hours of operation 9,005 hours Press power 80 tons Press force free-stamper 15 tons Feed channel 1,400 x 1,100 mm (l x w) Theoretic throughput rate 250 m³/hour Bale size 1,100 x 700 mm (w x h, length variable) Driving motor 45 kW Tying system 4-fold vertical Throughput rate approx. 8 up to 10 tons/hour, depends on material Bale weight 350 up to 550 kg, depends on material Machine weight baler approx 16 tons Additional equipment: Cutting edges free stemper, oil cooler and oil heater Technical data for the infeed belt to the baling press Manufacturer Avermann Type KGF 1200 Year of construction 1 ...

Category: 834: post press: perfect binders
approved
dealer
New in: 2000
Price: request quote
Location: Land-de DE
Seller: TMP Meurer Industry & Consult GmbH

Gathering Machine 1571 1 hand feeding station 16 feeder station with ASAC 1 Vertical channel 1 Transfer element to perfect binder 1 Pressure/vacuum Perfect binder TIGRA 1570 9 clamps handfeeding station Milling station Hotmelt spine glue pot with trolley Hotmelt side gluing device Premelter Pile cover feeder Cover pressing station Delivery Paper chips suction Turndown device Delivery belt

Category: 502: presses
approved
dealer
New in: 2006
Price: request quote
Location: Land-nl NL Tschechien
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Presona Typ LP 100 DH 2 Year of construction 2006 Hours of operation total 42,239 hours, stand April 2019 Quantity of pressed bales 468,376 bales, stand April 2019 Press power main press 100 tons Specific press capacity 120 N/cm² Press power prepress 50 tons Feed channel 2.050 / 1.000 x 1.100 mm (The shaft length can be adjusted by shifting the pre-press from max. 2,050 mm to min. 1,000 mm) Capacity per cycle time 3,2 m³ Theoretic throughput rate 780 m³/hour Throughput rate under operating conditions 450 m³/h Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx ...

Category: 110: accessories for machine tools
approved
dealer
New in: 1996
Price: 9.500 €
Location: Land-de DE 58513 Lüdenscheid
Seller: WTS Maschinenhandels KG

- 7x guide channels (oil guided) Ø 17/ 21/ 26/ 32/ 36/ 43/ 46 mm in very good conditions (photos) - incl. 2x moveable rack for the guide channels - max. bar length 3.200 mm - barpusher length LL - centering device - axial movement - weight: 1100 kg - dimensions LxWxH: 3.800x700x1.300 mm

Category: 502: presses
approved
dealer
New in: 1998
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Typ 182 LB 6P Super Year of construction 1998 Working hours 36,012 h stand April Press power main press 90 tons Press power of pre-press 1 + 2 41,7 / 47,2 tons Feed channel 1,620 x 1,080 mm (l x w) Capacity per cycle time 2,5 cbm Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 130 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 20 up to 40 kg/cbm approx. 8 up to 12 tons/h bulk weight of 60 up to 80 kg/cbm approx. 16 up to 22 tons/h bulk weight of 100 up to120 kg/cbm approx. 24 up to 28 tons/h Bale weight approx. 500 up to 600 kg Volume hydraulic tank approx. 1,400 l Baler dimensions built up with ...

Category: 107: sheet metal working
New in: 2005
Price: request quote
Location: Land-bg BG ATHENS
Seller: PROFIT Machinery Point Ltd

Machine: Tauring Delta 50 CNC – S Stock Nr: 13147 Year of Manufacture: 2005 Condition: Like New 8 hours of operation Control: CNC 2 axis specifications Driving Rolls, Standard set 8 R.P.M. 50 mm Shaft Diameter High-Quality, Italian Build Equipped with the Tauring CNC-S (Touchscreen CNC Control) LED Display for Digital Readout of Top Roll Position Includes Interchangeable Universal Tooling 114.3 mm Standard Shaft Working Length Weighs Approximately 620 Kgs Machine Dimensions: 1.040 x 1.350 x 1.500 mm BENDING CAPACITIES Round Tube: 75 mm x 2.29 mm with a 1.420 mm Minimum Radius Solid Round: 54.6 mm with a 914 mm Minimum Radius Square Tube: 57 mm x 3.0 mm with a 914 mm  ...

Category: 502: presses
approved
dealer
New in: 1998
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer HSM Type VK 75 / 1600 Year of construction 1998 Hours of operation 54,412 hours Press power main press 75 tons Specific press capacity 99,2 N/cm² Feed channel 720 x 1,600 mm (w x l) Capacity per cycle time 1,21 m³ Theoretic cycle time 14,4 sec. Theoretic throughput rate 339 m³/h Bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l) Driving motor 55 kW, 500V, 50 Hz, 79 A Connected load 64 kW, 500 V, 98 A Tying system 5-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6,8 tons/h bulk weight of 50 kg/cbm up to 16,9 tons/h Bale weight up to 620 kg/bale, depends on material Volume hydraulic oil tank 1,250 l SPS controller (manuf., type) Siemens ...

Category: 502: presses
approved
dealer
New in: 1995
Price: request quote
Location: Land-pl PL 43300 Bielsko-Biala, ul. Gen. St. Maczka 9
Seller: ARTechnic

Max. pressure: 50 tons Year of production: 1995 Unit pressure: 7,14 kg/cm² Number of strappings: 3 in horizontal Cross-section of the channel: 1000 x 700 mm Filling inlet: 1500 x 950 mm Bale weight: do 500 kg Weight: ca. 10 tons Supply: 400 V/ 22 kW Bale tying: automatic, wire Open charging hole allows the filling with the conveyor belt . Knives on the press plate and frame of the baler to cut off the excess material Automatic regulation of the light of the channel Automatic bale tying with the wire Choosing the length of the finished bale from the operator panel Pressing plate which is stable carried on the big rolls Englisch - Ewelina Pekala +48 ...

Category: 502: presses
approved
dealer
New in: 2006
Price: request quote
Location: Land-nl NL Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler: Manufacturer BOA Typ Continette II Year of construction 2006 Press power 43 tons Specific press power 65 N/cm² Feed channel 1,200 x 840 mm Theoretic cycle time 12 sec. Theoretic throughput rate 120 m³/hour Throughput capacity under operating conditions approx. 72 m³/hour Bale size 800 x 800 mm, length variable Driving motor 35 kW Tying system 4-fold horizontal, fully automatic Machine weight baler approx. 9 tons Condition of the baler with conveyor belt: The press with conveyor belt is in good condition, currently still in operation and will be dismantled and stored in the 43rd calendar week. Scope of delivery: BOA chain belt conveyor with feed hopper and baling pres ...

Category: 706: beverage machines
approved
dealer
New in: 2009
Price: request quote
Location: Land-de DE 97753 Karlstadt-Karlburg (bei Würzburg), Industriegebiet Hessheimer Weg 3-7
Seller: Eurolux GmbH & Co.KG

Complete bottling filling line UNI-PROD General information Year of realization: 2009 Products: - Fruit juices - Nectars Type of filling: Hot Fill Format: - 0,25 liters (glass) - 0.50 liters (glass) - 1.00 liters (glass) All bottle formats available in PDF file! Capping: Twist Off diam. 38 mm Label: Wrapper sleever Juices production: - 10.000 bp / h (0,250 En) - 5.000 bp / h (0,500 En) - 2.500 bp / h (1,000 It) Liquor production: - 1.500 bp/h (0,250 It) - bp/h (0,500 It) Packaging: WRAP AROUND cartons (6x4 on 0,25 and 2x3 on 1 It) SPECIFICATIONS 1.A BOTTLING ROOM - Semi-automatic push-on depalletizer with ground blade - tunnel steam prehe ...

Category: 502: presses
approved
dealer
New in: 2001
Price: request quote
Location: Land-nl NL Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Paal Typ Konti MK 325 D-SO Year of construction 2001 Hours of operation 28,898 hours, stand January 2019 Press power main press 94 tons Feed channel 2,000 x 1,020 mm Filling volume 2,15 m³ Theoretic throughput rate 825 m³/h Throughput rate under operating conditions 400 m³/h Bale size 1,100 x 750 mm, length variable Driving motor 2 x 45 kW Ruffler 15 kW Connected load 128 kW Rated current 240 A Tying system 4 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 14 tons/h bulk weight of 50 kg/cbm approx. 27 tons/h bulk weight of 100 kg/cbm approx. 38 tons/h Bale weight 525 up to 800 kg, depends on bale length and material Vol ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)