channel used for sale

used, kpl. 1 year warranty, plate size 800 x 800 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 600 liters, filter area 48m2, dimensions 5500 x 1400 x 1600 mm, weight 5.8 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

10,000 bottles PET/h 2 channel rinsers

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 12 bar, capacity approx. 150 liters, filter area 12m2, dimensions 2500 x 900 x 1200 mm, weight 800 kg, hand hydraulics, drip plate, filtrate channel, with or without filter cloths

Material test bench / final inspection consisting of the following main components Keyence XG-H500M Digital 5 Million Pixel P/W Camera CCD: 2/3-inch monochrome CCD, squareElement all pixels 11 times read speed, 5,050,000 pixels Scan Method: Progressive (61.2 ms), Interlace (40.3 ms)Interlace is a binning process that sums up the odd rows and even lines. Model CA-DC21E Lighting Controller Type lighting controller For XG/CV-5000/CV-X200/CV-X100 series only Input: Forced shutdown of the lighting: Input voltage max. 26.4 V, min. 2 mA Edition Light control method (1) Constant voltage regulation method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change of ECU setting] Brightness levels 255 levels digital [Change of ECU setting] Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates, open outlet, 30 mm cake thickness, pressure 7/15 bar, capacity approx. 384 liters, filter area 17m2, dimensions 4500 x 1200 x 1500 mm, weight 350 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Operating hours: 23546 Technical data Number of axis total: 5 Table length: 920 mm Table width: 380 mm Number of T-channels: 7 Distance of the T-slots: 50 mm T-channel width: 12H8 mm Table load max.: 250 kg Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 350 mm Vertical travel (z axis): 610 mm Tool magazine number of tools: 24 Tool diameter max.: 63 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 175 mm Max. tool-weight: 1.5 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: HSK: E40 / DIN 69893 Distance spindle nose to table: 97 - 704 mm Spindle speeds: stepless from: 30 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Voltag ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 426 / 430 Operating hours: 24453 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 1050 mm Table width: 590 mm Number of T-channels: 8 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Table load max.: 400 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Tool changer:: TC 30 Tool diameter: 90 mm Diameter with free adjacent pockets: 110 mm Tool lenght: 250 mm Max. tool-weight: 6 kg Time of tool changing: 5 sec Average chip-to-chip time: 7 sec Spindle nose: HSK-A: 63 DIN 69893 Spindle speeds: stepless from: 100 rpm up to: 20000 rpm Feed range: 1500 mm/min Rapid traverse:: 22 m/min Air connect: 6 - 7 bar Voltage 50 Hz  ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 55 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 710 liters, filter area 58m2, dimensions 6000 x 1400 x 1800 mm, weight 6500 kg, motor hydraulics, automatic. Plate transport, drip plate, filtrate channel, with or without filter cloths

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 0 Technical data Table length: 700 mm Table width: 500 mm Number of T-channels: 5 Distance of the T-slots: 100 mm T-channel width: 18H7 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 540 mm Tool changer: Number of tools: 24 Tool diameter max.: 77 mm Diameter with free adjacent pockets: 115 mm Tool lenght: 305 mm Max. tool-weight: 6 kg Time of tool changing: 6 sec Average chip-to-chip time: 8 sec Spindle nose: ISO: B40 Vertical spindle speeds: stepless from: 100 rpm up to: 10000 rpm Rapid traverse: long.: 24 m/min Rapid traverse: transversal: 24 m/min Rapid traverse: vertical: 20 m/min Voltage 50 Hz 3x: 400 Volt Spindle power: 12  ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 60 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 800 liters, filter area 64m2, dimensions 6000 x1300 x 1500 mm, weight 5800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

bore capacity in steel (diameter): 40,0 mm throat: 320 mm bore stroke: 160 mm morse taper: 4 MK table:: 500 x 420 mm turning speeds: 90 - 1455 U/min total power requirement: 1,0 / 1,5 kW weight of the machine ca.: 450 kg. range L-W-H: 500 x 930 x 1870 mm characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sl ...

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...

used, kpl. 1 year warranty, plate size 800 x 800 mm, 100 plates, open outlet, 25 mm cake thickness, pressure 15 bar, capacity approx. 1320 liters, filter area 106m2, dimensions 9000 x 1300 x 2200 mm, weight 11,000 kg, motor hydraulics, filtrate channel, with or without filter cloths

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN MillPlus /3R-WorkMaster +3R-WorkShopManager Operating hours: 30452 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Circulary table diameter: 630 mm Number of T-channels: 9 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 50H6 mm Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 700 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 1000 mm Diameter: 920 mm Table load max.: 500 kg Table divisions (B): 360 ° A axis Swivel angle (a-axis): +45/-30 ° Holding torque A-axis: 3866 Nm Clamping torque C-axis: 6008 Nm Torque max.: 2650 Nm Tool changer: Number of tools: 180 Tool diameter: 80 mm Diameter with free adja ...

Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT

Bagging filter PAFO 3/3-20/1518 with vibratory motor with Duct bend Channel Non-return valve Duct fitting without fan Year of manufacture 2004 L x W x H: 200 x 70 x 300 cm Weight 350 kg The bagging filter is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Fristam FPE1232/185A 30 kW pump capacity: 50.000 - 200.000 l/h The specific profile of their impellers provide for a steady, smooth flow with minimal secondary swirl even at high flow rates. Universal use, gentle product handling, robust, easy to maintain, durable, economical. The Fristam FP’s well-thought-out design provides you with the optimal solution to your specific requirements. Fristam pumps FP are designed with open impellers, with narrow gaps between the impellers and the cover. Combined with the flow-optimised pumping channel, these ensure minimal secondary flow, very gentle product handling even at high volumetric flows, and energy-saving operation. The FPs’ design makes them ideal for hygienic applications. The pumped medium may be homogenous, or contain air, gases or suspended solids.

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 151 Technical data Number of axis total: 3 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 25 rpm up to: 8000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 10H8 mm Number of T-channels: 4 Height of table above floor: 1160 mm Min. distance from table to spindle: 0-110-560 mm Max. distance from table to spindle: 560 mm Longitudinal travel: 420 mm Transversal travel: 230 mm Vertical travel: 450 mm Feeds: 1 - 8000 mm/min Rapid traverse:: 8 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Power: 5.8 kW Total power required: 15 kVA Machi ...

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Pneumatic conveying system for various types of powder, consisting of: feed hopper with lid and compressed air turbine vibrator (netter NCT 10), injector (Telschig 2' FOX 300-SCE-SS) and side channel compressor (Electric Sd 820, 7.5 kW, 9.0 m3/h, 420 mbar) with pressure limiting valve. Flow capacity: 375 kg/h, required conveying air: approx. 180 Nm3/h at 330 mbar.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Technical data Number of axis total: 4 Table length: 1600 mm Table width: 800 mm Number of T-channels: 5 T-channel width: 22H8 mm Distance of the T-slots: 160 mm Height of table above floor: 890 mm Table load max.: 4000 kg Longitudinal travel (X-axis): 1500 mm Transversal travel (y axis): 1000 mm Vertical travel (z axis): 1000 mm Taper in spindle:: 50 SK Spindle speeds: number (steps): 2 stepless from: 30 rpm up to: 930 / 3500 rpm Feeds (X, Y, Z): 1 - 6000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 400 Volt Milling spindle motor: 22 kW Total power required: 42 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 7360 mm Width: 5120 mm Height: 2700 mm Various accessories: Table 4th axis CNC Handwhee ...

Pneumatic conveying installation for different kinds of powders, consisting of: Feeding hopper with cover and turbine vibrator (Netter NCT 10), injector (Telschig 2'' FOX 300-SCE-SS) and side channel blower (Elektror Sd 820, 7,5 kW, 9,0 m³/h, 420 mbar) with pressure limiting valve. Conveying capacity: 375 kg/h, required air flow: Ca. 180 Nm³/h at 330 mbar.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1520 mm Table width: 300 mm Number of T-channels: 3 T-channel width: 14H7 mm Distance of the T-slots: 80 mm Clamping surface Length Grinding length: 1200 mm Grinding width: 400 mm Execution: hydraulic Max. distance from table to spindle-centreline: 500 mm Longitudinal travel (X-axis): 1280 mm Transversal travel (y axis): 350 mm Automatic cross-feed: stepless from: 0 m/min up to: 7 m/min Table speeds: stepless from: 0.3 m/min up to: 30 m/min Automatic vertical feed: from: 0.0001 mm up to: 0.0010 mm Diameter of grinding wheel: 400 mm Width of the grinding wheel: 80 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1480 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 7.5 kW Machine´s weight about: 3700 kg Overall dimensions mach ...

Koettermann Laboratory extract2-402-HD DIN 12924 Media supply: 1x water, 1x gas, 4x Current 230 V, 1x Current 400 V Lighting walkable Exhaust control funnel control indicator Phoenix Controls Trigger monitoring display Optional: Phoenix Controls and channel insert for the deduction monitoring 500,-EUR mass:

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

- Engine power 7.5kW / 32 amperes - Control PLC supported, with two-hand safety circuit - Cutting force 30to Cutting channel designed for: - max. roll length 1500mm - max. roll diameter 1200mm - Machine weight approx. 3000kg - Hand guard grille in the area of the control panel and opposite - Forklift riding shoes are used for easy and safe transport of the Machine by forklift - Spaltertisch straight version Colour blue Machine immediately available

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 4 Spindle nose:: SF 32 Drill capacity in steel: 0.4 - 20 mm Drill capacity in cast-iron: 24 mm Threat cutting in steel M: 1 - 16 Thread cutting in cast-iron M: 18 Milling capacity: 20 cm3/min Spindle stroke: 120 mm Spindle speeds :stepless from: 50 rpm up to: 9000 rpm Table length: 730 mm Table width: 280 mm Distance of the T-slots: 50 mm T-channel width: 12H8 mm Height of table above floor: 1080 mm Min. distance from table to spindle: 0-110-560 mm Longitudinal travel: 420 mm Transversal travel: 240 mm Vertical travel: 450 mm Feeds: 1-7200 mm/min Rapid traverse:: 7.2 m/min Table load max.: 75 kg Voltage 50 Hz 3x: 380 Volt Spindle power: 5 kW Total power required: 10 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0i-MC Technical data Number of axis total: 3 Table length: 2000 mm Table width: 600 mm Number of T-channels: 5 T-channel width: 20 mm Distance of the T-slots: 125 mm Longitudinal travel (X-axis): 1700 mm Transversal travel (y axis): 1050 mm Vertical travel (z axis): 950 mm Distance from vertical spindle to table: 0 - 753 mm Distance from horizontal spindle to table: 0 - 290 mm Distance from spindle axis to slide ways: 650 mm Spindle speeds: stepless horizontal from: 45 rpm up to: 1500 rpm vertical from: 45 rpm up to: 1500 rpm Spindle nose: BT: 50 Feeds (X, Y, Z): 30 - 6000 mm/min Rapid traverse:: 6 m/min Spindle motor: 15 HP Total power required: 35 kW Machine´s weight about: 7500 kg Overall dimensions machine: Length: 3490 mm Width:  ...

Control: HEIDENHAIN TNC 355 Technical data Number of axis total: 3 Table length: 1200 mm Table width: 600 mm Number of T-channels: 9 T-channel width: 14H7 mm Table load max.: 700 kg Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 630 mm Vertical travel (z axis): 500 mm Distance from vertical spindle to table: 65 - 565 mm Spindle speeds: stepless from: 10 rpm up to: 6300 rpm Tool changer: number of tools: 40 Spindle nose: ISO: 40 Feeds (X, Y, Z): 2 - 4000 mm/min Feeds: Rapid traverse: long.: 10 m/min Rapid traverse: transversal: 10 m/min Rapid traverse: vertical: 8 m/min Stroke of horizontal spindle: 100 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 15 kW Machine´s weight about: 7000 kg Overall dimensions machine: Length: 3500 mm Width: 2400 mm Height: 2400 mm Various accessories: Rigide table Electronic hand held control Hydraulic work-piece clamping Full ...

Ibrahim titanium door formwork items, comprising: 2 piece corner carrier 820 fitted with lateral support for door heights of 2, 00 m 3 piece channel brace GI-A/60-81 for door widths from 0, 86 m to 1. 06 m 6 piece socket pins Up to 100 bets possible Condition: used, very good The material can be visited by appointment. Please note also our other offers! We can offer you several thousand square metres of used moulds, tools and containers - ask us!

Technical data Table length: 760 mm Table width: 400 mm Clamping surface: Length: 600 mm Width: 320 mm T-channel width: 12H8 mm Height of table above floor: 810 mm Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Drill depth (spindle stroke): 120 mm Max. distance from table to spindle nose: 110 - 570 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Vertical travel (z axis): 460 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Vertical feeds: from: 0 mm/min up to: 800 mm/min Quill feed speed: number (steps): 6 from: 0.04 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2050 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Threading device Lamp Quick change device Set of clamping tools Digital readout number of axis:: 2 Manufacturer: ACU RITE Spindle brake Turret s ...

Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 850 mm -Machine weight approx. 3, 4to -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Bench drill make ROMANIA type G 13Fabr. -No: E647, built in 1973Technical specifications:Drilling capacity: 13 mm8 spindle speeds: 425 - 4500 RPM.Throat: 200 mmTable size processing area: 250 x 300 mmTable size with channel: 340 x 370 mmColumn diameter: 80 mmelectr. Connection: 1.35 kWExternal dimensions of the drill L x W x H: 800 x 370 x 950 mmColor greenWith- underframe- V-belt driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

-Engine power 7, 5kW -PLC based, two-hand safety control -Cutting force 50to -Splitting er table straight version -Cutting channel: -maximum blade length L = 3000mm -Max opening H = 1250 mm -Machine weight approx. 3, 9t -Hand guards in the area of the control panel and to present -Stacker running shoes including (is used for easy transportation of the machine by forklift) Machine in stock and available at short notice Price and further details on request

Gear column drilling machine make WMW VEB Saalfeld type BS 25BMachine -No: 9587/59Technical specifications:Drilling capacity in steel - diameter: 4 - 32 mmThread cutting ST 60 / Alu up to: M 20 / M 32Spindle mount: MK 3Throat: 280 mmDrilling stroke: 150 mm4 spindle speeds: 125 - 710 rpm.4 feed rates: 0.10 / 0.16 / 0.25Table size with channel: 570 x 475 mmTable size clamping surface: 450 x 355 mmDrive power: 3 kWWeight: 700 kgExternal dimensions: 900 x 570 x 2400 mmWith- automatic feeds- Thread cutting with compensating chuck- machine light- Emergency stop switch- separate cooling deviceused, in working conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

-Engine power 7, 5kW -30to cutting force Cutting channel designed for -maximum roll length 1500 mm -maximum roll diameter 1200 mm -Machine weight approx. 3000 kg -Tank capacity ca. 100Liter -Hand guards in the area of the control panel and to present -Splitting er table straight version Documentation 2 German (1 x writing, 1 x CD) Being body RAL 7035 light grey Guards/blade RAL 1028 melon yellow Ibkah3p Machine in production / available from 04-2019 Price and further details on request

CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Format range: 1350 mm, min 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point bonding, electronic upper glue unit HHS Xpect YOC 2017, 8 channel with 4 application heads, disc glue on the left, new electronic servo overtaking system with touchscreen, Feeder with clock control and vibrator, feeder belt with Quick adjustment, pre-breaker right and left, kicker, counter, digital position indicators, additional means transport in the Pre-crusher top/bottom, folding floor module 150 with additional Medium transport top/bottom, additional means transport in folding, Jagenberg DBS01 control, motorized threading station, Video surveillance in the transfer station, fully automatic Format setting Jagset 2, cutting alignment on the press belt, pneumatic, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transpor ...

Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-1, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm:105 Spray weight gr: 4137 Spray volume cc: 4546 spray pressure possible: 1778 Dimensions and weights Machine weight Kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64

Roche MagNA Pure LC Nucleic Acid Preparation Station Manufacturer's description, all information without guarantee. Performances Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from the software-supported setup of reagents and disposable items. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels), LightCycler ® 480 multiwell plates (96-well), PCR plates or strips or tubes. Product The MagNA Pure LC instrument is a benchtop device for fast, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection, and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument ...