chamfer used for sale

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 405 mm table width: 150 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 215 mm dayligth: 465 mm table height: 960 mm operating pressure: 320 bar oil volume: 200 l voltage: 3x 400 V total power requirement: 15.0 KW weight of the machine ca.: 9500 kg range L-W-H: 3958 x 2350 x 2750 mm maintained condition () Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-contro ...

pressure: 320 t chamfer lenght: 4100 mm : 600 : 250 : 2900 mm Stroke: 265 mm throat: 400 mm distance between columns: 3750 mm dayligth: 550 mm table width: 60 mm oil volume: 600 l weight: 29.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: mm throat: mm distance between table / ram: mm stroke: mm feed down: mm/sec feed bending: mm/sec feed up: mm/sec engine output: kW weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2550 mm distance between columns: 2050 mm Control: Delem DA-66T throat: 255 mm ram stroke: 215 mm dayligth: 530 mm rapid traverse - down: 150 mm/sec press speed: 1 - 9,8 mm/sec return speed: 80 mm/sec power capacity: 7,5 kW tank contens: 228 l sound - pressure - turn off level ca. max.: >70 dB connected load: 12 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,9 x 1,6 x 2,8 m CE signed: Electric 400 Volt: Foot switch: Light barrier in front: Matrize: Upper tool: crowning system: Mot. back gauge: 580 mm Hydraulic press brake with updated CNC control Delem DA-66T, controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning, cranked upper tool and matrix single V. X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm. R-axis stop vertical 200 mm, 15 ...

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l total power requirement: 11 kW weight of the machine ca.: 14000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4100 mm stroke: max. 315 mm Control: Cybelec ModEva15T pressing speed: 1 --> 10 mm/sec closing speed: max. 200 mm/sec Stop Time max.: 110 mS compressed air: max 8 bar total power requirement: kW weight of the machine ca.: 13,2 t - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax ...

Equipment: -Chassis - Quick-heating glue container - Support plate for rolls - Roll capping - Cross-cut saw - Flush milling Radius/Straight/Chamfer - Suction nozzle Ø 100 mm Specifications: Power ratings: 400 V, 50 Hz, 13.3 A, 7 kW max. edge thickness 5 mm max. workpiece height 40 mm min. workpiece length 300 mm Feed speed 11 m/min Ready for use in approx. 4.5 min Work table height 900 mm Dimensions: 3,300 x 1,400 x 1,300 mm Weight approx. 550 kg All information is subject to change of the actual equipment

pressure: 50 t chamfer lenght: 1500 mm distance between columns: . mm Control: Cybelec closing speed: 95 mm/min working feed: 1-10 mm/sec stroke length max.: 150 mm overrun time: 59 ms tracking travel: 6 mm weight of the machine ca.: 6,2 t dimensions: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...

pressure: 50.0 t chamfer lenght: 1275 mm distance between columns: 1040 mm column arm: 410 mm table width: 100 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec stroke: 215 mm tiltable up to: +/- 10 mm table height: 1050 mm dayligth: 385 mm oil volume: 80.0 L travel -x axis: 500 X-Weg mm traversing speed: 300 R-Weg mm compressed air: 6.0 bar Number of working hours: 24.000 h control: DELEM total power requirement: 8.0 KVA weight of the machine ca.: 4750 kg. range L-W-H: 2000 x 2000 x 2380 mm Machine with only approx. 24.000 operating hours () all axes controlled: Y1 + Y2 / X / R / Z1 + Z2 / I axis Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis - CNC controlled back gauge (X axis) - CNC controlled hei ...

pressure: 230 t chamfer lenght: 3060 mm distance between columns: 2690 mm Stroke: 365 mm distance between columns: 2690 mm dimensions: 3660 x 2310 x 3100 mm machine weight ab.: 17.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t chamfer lenght: 1270 mm weight of the machine ca.: 3250 kg dimensions of the machine ca.: 2150x1650x2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 5050 mm control: Cybelec ModEva Y-rapid travel: 100 mm/s : 10 mm/s : 100 mm/s oil volume: 250 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 250 mm quantity of oil: 300 l frequency: 50 Hz : 63 A voltage: 3 x 400 V total power requirement: 21,5 kW weight of the machine ca.: 11260 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 4080 mm distance between columns: 3680 mm throat: 410 mm ajustment speed: 150 mm/sec return speed: 135 mm/sec bending speed: 10 mm/sec height of stroke: 365 mm dayligth: 535 mm total power requirement: kW weight of the machine ca.: ca. 24 t dimensions of the machine ca.: 4,65 x 2,31 x 3,10 m • 2D graphics control Delem DA • pneumatic matrices displacement • 2 movable support arms • Hydraulic tool clamping at the top and bottom • CNC controlled crowning • controlled axes: Y1, Y2, X, R1, R2, Z1, Z2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t chamfer lenght: 3200 mm distance between columns: 2500 mm Control: E21 stroke - max.: 320 mm stroke: 120 mm throat: 250 mm back stop - adjustable: 500 mm total power requirement: 5,5 kW weight of the machine ca.: 4,0 t dimensions of the machine ca.: LBH 3,20 x 1,30 x 2,21 m including upper tool including die Bending capacity steel: 2.5 mm to 3,200 mm Machine may not comply with current UVV guidelines We expressly point out that we assume no responsibility for this Machine is sold as is The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 4050 mm distance between columns: 3550 mm throat: 450 mm stroke: 350 mm dayligth: 600 mm ajustment speed: 140 mm/sec bending speed: 10 mm/sec return speed: 130 mm/sec total power requirement: 22 kW weight of the machine ca.: 12 t - upper tool, divided 4050 mm (new) - block tool 4050 mm: V16, V50, V20, V35 (new) - Pneumatic tool clamping above - CNC controlled crowning - controlled axes: Y1, Y2, X, X1, R, Z1, Z2 - Support arms movable on linear guide and height adjustable - Fiessler photocell - Stmer ESA S560 Touch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 210 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 490 mm throat: 350 mm stroke: 215 mm working feed: 9,8 mm/sec return speed: 80 mm/sec ajustment speed: 130 mm/sec work height max.: 845 mm Control: DELEM DA 69 total power requirement: 15 kW weight of the machine ca.: 15 kg dimensions of the machine ca.: 3880 x 1675 x 3880 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 4100 mm distance between columns: 3550 mm Machine No.: 5083 weight of the machine ca.: 24.000 kg New controller: DNC 884sPS Domestic equipments: - CNC controlled X & R axis - CNC controlled crowning - hydraulic stamp clamping - Fiessler safety light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment: - PLC control - Edge magazine - Glue application system "Cartridge" -Printed work - Cross-cutting unit - Milling unit, for flush/chamfer/radius - Shape milling unit - Radius scraper blade Specifications: - Length: 4,445 mm - Width: 1,500 mm Working Dimensions: - Workpiece thickness: 6-45 mm - Edge thickness: 0.4-8 mm - Workpiece width: min 60 mm - Workpiece length: min. 180 mm - Feed speed: 8/16 m/min without corner copying - Extraction connection: 2 x Ø 70 mm Static vacuum 1650 Pa Min. air velocity 20 m/sec - Compressed air connection 6 bar technical data subject to actual equipment!

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15? Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

chamfer lenght: 3050 - 4020 mm 4 pieces of unused upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 200 mm ajustment speed: 100 mm/sec working feed: 8,0 mm/sec return speed: 120 mm/sec stroke: 190 mm table height: 900 mm dayligth: 350 mm engine output: 15,0 kW oil volume: 150 ltr. Control: ELGO weight of the machine ca.: 13500 kg. range L-W-H: 4800 x 1750 x 2800 mm Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display digital position display for backgauge (X axis) digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/fo ...

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10 mm Number of working hours: 26.937 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 16.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3640 x 2210 x 2885 mm maintained condition () - - - - - - - - - - - - - - HIGH-SPEED electro-hydraulic press brake with: increased installation height increased cylinder stroke - - - - - - - - - - - - - - Furnishing: - CNC electro-hydraulic die bending press - including DELEM CNC control model DA 65 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC controlled ...

pressure: 175 t chamfer lenght: 4050 mm Control: DNC 1200 PS weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1200 kN chamfer lenght: 3110 mm distance between columns: 2690 mm dayligth: 347 mm tiltable up to: +/- 3 Grad throat: 420 mm table width: 100 mm work height max.: 1000 mm rapid traverse y-axis: 200 mm/min speed: working cycle y-axis: 10 mm/s return travel y-axis: 180 mm/s x-axis: 500 mm/s r-axis: 200 mm/s z-axis: 1000 mm/s 0: y-axis: +/- 0,01 mm x-axis: +/- 0,05 mm r-axis: +/- 0,01 mm movement: y-axis: 200 mm x-axis: 600 mm r-axis: 340 mm Control: total power requirement: 18,5 kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: 3,60 x 1,75 x 2,33 m control: 2D-colour-graphic control DELEM T 3000 inclusive tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

pressure: 50,0 t chamfer lenght: 2050 mm distance between columns: 1550 mm dayligth: 320 mm stroke: 120 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 75,0 mm/sec column arm: 250 mm work height max.: 900 mm table width: 100 mm connected load: 7,2 kW oil volume: 90 ltr. weight: 2600 kg range L-W-H: 2250 x 1100 x 2050 mm Furnishing: - DELEM CNC control model DA 24e - swiveling control panel - electrical backgauge (X axis) - 2x manually adjustable stop fingers lateral + vertical adjustment (R + Z axis) - 2x front support arms - SICK light barrier in front - 2 hand / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working piece thickness (Radius) ca. 16 - 55 mm Working piece thickness (Chamfer) ca. 12 -55 mm Working piece width min. Ca. 30 mm Inner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours) Edge thickness max. ca. 3 mm Milling motor 2 x 0,4 kW, 10950 o/min. Dust extraction 1 x diam. 80 mm Working height 900 mm Radius 3 mm tooling

max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Milling speed : 12000 rpm Work table height: 865 mm Radius 3 mm tooling

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATIC NC16

pressure: 230 t chamfer lenght: 3230 mm throat: 420 mm stroke of ram: 445 mm column daylight: 2690 mm weight of the machine ca.: 16.500 kg dimensions of the machine ca.: 4995 x 3370 x 3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t chamfer lenght: mm throat: mm stroke of ram: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 250 mm dayligth: 375 mm stroke: 150 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 65.0 mm/sec table width: 160 mm work height max.: 900 mm oil volume: 130 ltr. total power requirement: 7.5 kW weight of the machine ca.: 8700 kg range L-W-H: 3220 x 1290 x 2550 mm well maintained / good condition () Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis adjustment Y1 - Y2 - X axis - CNC electro-motorized back gauge incl. 2x manually adjustable stop fingers (R+Z axis) - manual table cambering, adjustment via hand crank including analogue value display - 1x split pointed upper tool (manufacturer UKB) - 1x universal rotating Multi-V die block i ...

pressure: 130 t stroke: 365 mm distance between columns: 2690 mm chamfer lenght: 3060 mm safety distance: 104 mm voltage: 3 x 400 V rated current: 47 A frequency: 50 Hz Power connection: 18,8 kVA control voltage: 24 kW Required air-pressure: 6 bar : 65 ms operating pressure: 340 bar weight of the machine ca.: 12950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80.0 t chamfer lenght: 2550 mm distance between columns: 2060 mm ajustment speed: 90.0 mm/sec working feed: 10.0 mm/sec return speed: 90.0 mm/sec stroke: 140 mm work height max.: 930 mm dayligth: 375 mm Number of working hours: ca. 1.300 h total power requirement: 8.5 kW weight: 6300 kg range L-W-H: 2830 x 1900 x 2500 mm Machine from a vocational training center (Chamber of Crafts) good / well-maintained condition with only approx. 1.300 operating hours () Furnishing: - CNC electro-hydraulic press brake - DELEM CNC control - model DA 58 Swivel control panel, front left 2D graphical programming & product display Tool & program library - CNC axis control: Y1 - Y2 - X axis + motorized crowning - electro-motorized & controlled backgauge with 2x manually movable stop fingers (R+Z axis) - manual upper tool & lower tool clamping - split upper and lower tools - 2x stable, front  ...

pressure: 135 t chamfer lenght: 4050 mm distance between columns: 3150 mm throat: 200 mm dayligth: 310 mm piston stroke: 130 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 65.0 mm/sec table width: 180 mm table height: 900 mm Control: ELGO P8822 pressure: 220 bar total power requirement: 8.5 kW weight: 8700 kg range L-W-H: 4500 x 1700 x 2640 mm from a maintenance workshop maintained condition () Furnishing: - simple NC electro-hydraulic press brake - with ELGO digital control unit - model P8822 Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swivel control panel, front right - electro-motorized back gauge (X axis) with digital ELGO position display 2x manually adjustable stop fingers (R+Z axis) - WILA manual table cambering, with analogue actual value display - split deer foot upper tool: https://www.ukb-gmbh.de/de/1652 ...

pressure: 175 t chamfer lenght: 3050 mm voltage: 3x400 V control voltage: 24 kW : 80 A frequency: 50 Hz : DNC 1200PS PressCad : 18,5 kW quantity of oil: 350 l height of the machine: 3360 mm weight of the machine ca.: 12700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2600 mm stroke of upper beam: 120 mm throat: 250 mm dayligth: 325 mm working feed: 7.0 mm/sec return speed: 60.0 mm/sec : 300 bar Control: ATL 550 work height max.: 915 mm table width: 180 mm total power requirement: 7.5 kW weight: 8250 kg range L-W-H: 3500 x 1700 x 2380 mm Furnishing: - simple NC controlled hydraulic press brake, including torsion shaft - including ATLANTIC NC control ATL 550 Positioning of the back gauge (X) Positioning of the depth adjustment (Y1+Y2) Possibility of programming various programs Storage capacity max. 200 programs - max. 400 sets Swivel control panel, front left - electro-motorized, stepless depth adjustment (Y1+Y2 axis) - electro-motorized back gauge (X axis) 2x manually adjustable stop fingers - manual table crowning, including analogue value display - 1x split upper tool set - HAC ...

chamfer lenght: 3055 mm Various tooling: 2: 118 x 65 x 3055 mm, dimensions see sketch, price = 550, - Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 400 mm ram stroke speed: 100 mm/sec return speed: 9.0 mm/sec work speed: 90.0 mm/sec work stroke: 200 mm dayligth: 447 mm table height: 900 mm table width: 240 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 11600 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm current new price approx. 80.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP swiveling operation, front left numerical control Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) with 2x manually adjustable stop fingers (R+Z axis) Travel X = 800 mm - manual table cambering, adjustment via handwheel with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x s ...

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 350 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 86.0 mm/sec Control: DU 6000 work height max.: 910 mm table width: 240 mm oil volume: 150 l total power requirement: 15.0 kW weight: 9820 kg range L-W-H: 4200 x 2100 x 2700 mm New price ~ 60.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake Stress-relieved steel structure body = durable monoblock frame - DURMA DU 6000 CNC control (CYBELEC) Swivel operation, front right Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Possibility of programming various programs - CNC controlled axes: Y1 + Y2 + X - CNC electro-motorized back gauge (X axis) 2x manually adjustable stop fingers including lateral and height adjustment (Z+R axis) - m ...

pressure: 230 t chamfer lenght: 4250 mm column daylight: 3680 mm throat: 420 mm stroke of ram: 445 mm control: TASC 6000 weight of the machine ca.: 19500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2550 mm total power requirement: 11 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m motorized arrester tools Technische Daten / technical details: Druck / pressure 160 to Abkantlänge / bending lenght 3100 mm Durchgang zwischen den Ständern / distance between columns 2550 mm Ausladung / overhang 310 mm Antriebsleistung / drive capacity 11 kW Gewicht / weight 8500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 t chamfer lenght: 3550 mm stroke: max. 410 mm Control: Cybelec Modea 10 S height of the machine: 3200 mm weight: 14.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 3110 mm distance between columns: 2690 mm column arm: 420 mm stroke: 200 mm dayligth: 470 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 80.0 mm/sec table width: 100 mm table height: 1000 mm back stop - adjustable: max. 450 mm Number of working hours: ~ 7.670 h oil volume: 200 l voltage: 400 V total power requirement: 7.5 kW weight of the machine ca.: 7700 kg range L-W-H: 3600 x 1715 x 2410 mm Machine with only approx. 7.670 operating hours () Furnishing: - electro-hydraulic CNC press brake - DELEM CNC control model DA 619 Swivel control panel, front left Screen 12 LCD - 4 shades of gray 90x tools & 2,500 programs can be saved - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) Travel .. 450 mm Travel speed .. 350 mm/sec. - CNC controlled height adjustment from the back gauge (R axis) Tr ...

Edge sanding belt KS10: Yes; Chamfer and radius milling unit: Yes; Profile Grinding Wheel Unit: Yes; Machine Length: Machine Width: Weight: 800kg;

Joining unit: Yes; Edge thickness: maximum 3mm; Workpiece thickness: from 8mm - 45mm; Workpiece width: minimum 90mm; Glue basins: alternating granulate basins; Cross-cut shears: yes; Cutting / flush sawing: yes with corner round function; Milling station: chamfer/radius; Flat - Scraper: Yes; Radius Scraper: Yes; Inlet ruler adjustment: manual; Workpiece thickness adjustment: manual; Power consumption: 5 kW; Machine length: 2300 mm; Machine width: 1020 mm; Weight: 420 kg;

pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l : total power requirement: kW weight of the machine ca.: 15,00 t dimensions of the machine ca.: m • Cybelec ModEva PAC touch screen control, retrofitted • Pilz safety barrier retrofitted • controlled axes: Y1, Y2, X, R • 6 stop fingers can be moved laterally • Pneumatic die displacement • Upper and lower tool clamping automatically • 2 support arms on linear guides • CNC controlled crowning • Tool package consisting of: • Lower tool V6, segmented • Punch straight H 192, length = 3050mm Replacement blades are not included. Can be ordered in different radii. • Stamp offset H 220, length = 6x250mm Dimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 m The data for this ad was created with ModulMWS - the softwar ...