chamfer used for sale

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Wood Her Sprint 1312 FÜ + PU heavy design - edge thickness 0.4 - 8 mm PLC screen control Pre-milling unit for joining in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing car. Tactile nozzle Workpiece height 6-55 mm Cross-cut unit for rolls and strips up to 8 mm edge thickness with changeover of 0-10° inclination of the cross-cut saws Milling unit, flush milling 8 mm, radius milling - chamfer milling - 15° MOT Pulling blade unit for chamfers and radii with 2 pulling blade carriers pneum. pneumatic engagement and disengagement Surface Drawing Blade Unit - Finish Spraying device - PU Machine in TOP CONDITION

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

pressure: 180 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 235 bar voltage: 380 V total power requirement: 15,0 kW weight: 14200 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake with torsion shaft - ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric back gauge with 2 stop fingers, manually adjustable on ball screws - manual table crowning, with analogue display - divided deer foot upper tool 85° - divided MultiV - universal matrix block - rear protection - free-mo ...

sheet width: 3200 mm plate thickness: 4 mm distance between columns: mm pressure: t chamfer lenght: mm total power requirement: kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 6000 mm Upper tool straight: 25 pieces, total length: 6000 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 2800 mm Various tooling: 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. 2 pieces: 1500mm and 1300mm. Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 1370 mm Various tooling: 65 x 40 mm with 4 openings: 8, 10, 10, 35 mm. 6 pieces: 1370 mm Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20,0 t chamfer lenght: 850 mm distance between columns: 850 mm back stop - adjustable: 375 + 400 mm stroke of upper beam: 196 mm dayligth: 470 mm ajustment speed: 200 mm/sec table height: ca. 900 mm total power requirement: 5,0 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: 1800 x 1600 x 2000 mm New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided  ...

chamfer lenght: 2800 mm Various tooling: 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. 2 pieces: 1500mm and 1300mm. Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 060 t chamfer lenght: 2050 mm distance between columns: mm number of strokes - stepless: compressed air: 8 bar closing speed: 200 mm/sec total power requirement: kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,00 x 2,10 x 2,35 m • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Hydraulic tool clamping above + below • CNC controlled crowning • 2 support arms • 1 set of upper tools, length approx. 2200mm, R1, segmented • 1 die set V12/88°, length approx. 2000mm, segmented The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 3050 - 4020 mm 4 pieces upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 4130 mm Dimensions: 65 x 40 mm with 4-fold opening: 10, 30, 10, 10 mm. Total length 4130 mm. Stamps: 12 pieces, total length: 4300 mm. Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimension of workpiece: 200 mm workpiece weight max.: 100 kg voltage: 230 V longitudinal feed: 150 mm vertical movement: 100 mm tool taper: bis 60 mm im Prisma Condition: new / unused: The machine can be viewed under current.: WMTR video measuring device T 210 Granite base plate 500 x 600 x 50 mm Digital size 0,001 mm resolution Longitudinal axis 150 mm Vertical axis 100 mm Tool holder in prism up to 80 mm diameter Swivel bracket 210 ° swiveling image comparison export of dates to EXCEL frequently measuring of video pictures labeling and marking of pictures saving and printing of pictures free calculation of variables detailed user administration superposition of DXF-drawings a lot of special software-modules Video measuring system IPM complete with: Software complete data acquisition create measurement protocols Consisting of: - Calculator, monitor, mouse, keyboard - ...

pressure: 100 t distance between columns: 2004 mm chamfer lenght: 3500 mm table height over floor: 760 mm stroke: 315 mm control: DNC 73 PC total power requirement: 11 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1x1,7x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2050 mm control: CYBELEC DNC 880S weight: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75,0 t chamfer lenght: 2620 mm distance between columns: 2055 mm column arm: 400 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 90,0 mm/sec stroke: ~ 140 mm dayligth: ~ 360 mm table height: 930 mm table width: 85,0 mm Control: ELGO P8822 oil volume: 150 ltr. engine output: 7,5 kW weight of the machine ca.: ~ 6.500 kg. range L-W-H: 3700 x 1800 x 2700 mm Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit digital position indicator Entry of target/actual values possible - Electro-motor backgauge - X axis Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lat ...

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10 mm/sec return speed: 135 mm/sec work height max.: 900 mm quantity of oil: 200 l total power requirement: 15 kW weight of the machine ca.: 9450 kg - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system A with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH /  ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm dayligth: 550 mm throat: 410 mm stroke: 275 mm working feed: 10,0 mm/sec return speed: 185 mm/sec quantity of oil: 300 l Control: DELEM DA 66T total power requirement: 18,5 kW weight of the machine ca.: 13900 kg dimensions: 5150 x 2250 x 3000 mm HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke increased projection -------------------------------------------------- ------- Furnishing: - DELEM CNC control model DA 66T - swiveling touch screen control unit - 7 controlled axes : Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split deer foot upper tool Roleri 135.85.R08, System A - with additional crowning of the upper wedge - Universal die block ...

pressure: 6,2 t chamfer lenght: 285 mm mm distance between columns: 230 mm dayligth: 215 mm throat: 70 mm stroke: 100 mm working feed: 9,8 mm/sec return speed: 50 mm/sec quantity of oil: 10 l Control: DELEM DA 41T total power requirement: 0,7 kW weight of the machine ca.: 250 kg dimensions: 900 x 1300 x 550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l rated current: 27 A total power requirement: 11 kW weight of the machine ca.: 14000 kg dimensions of the machine ca.: 5675X3040X2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

pressure: 3 t chamfer lenght: 3600 mm distance between columns: 3100 mm Control: CNC type: M9101 Controller total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3660 mm distance between columns: mm Control: total power requirement: kW weight of the machine ca.: 13,50 t dimensions of the machine ca.: m • 2 stop fingers, can be moved laterally • Block die with: V75, V50, V40, V25, V20, V10 (V50 and V25 defective at approx. 10cm in the middle) • Straight punch, height 200mm, length 3000mm, segmented • ATL 500 control for immersion depth (Y) and back gauge (X) • Centrally adjustable crowning • 2 support arms • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm<CRLF>Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer mill ...

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995

pressure: 110 t chamfer lenght: 2550 mm quantity of oil: 390 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 3550 mm stroke: 200 mm quantity of oil: 150 l weight of the machine ca.: 11400 kg dimensions of the machine ca.: 4700x2100x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t chamfer lenght: 2050 mm distance between columns: 1550 mm dayligth: 475 mm throat: 255 mm stroke: 165 mm working feed: 9,8 mm/sec return speed: 117 mm/sec ajustment speed: 150 mm/sec Control: DELEM DA 65 total power requirement: 5,5 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: 2300 x 1550 x 2470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 130 mm throat: 200 mm dayligth: 310 mm working feed: 7,0 mm/sec return speed: 50,0 mm/sec Control: konv. work height max.: 905 mm table width: 180 mm oil volume: 250 Liter total power requirement: 7,5 kW weight: 7800 kg range L-W-H: 3500 x 1700 x 2280 mm Furnishing: - simple / conventional electro-hydraulic press brake - swiveling operation, front left - electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display - manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers - Manual (jog mode) and automatic cycle selectable - split deer foot upper tool (segmented) - 2x reversible MULTI V die blocks - 1x freely movable foot control Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?m ...

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 300 mm weight: 14000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passing. Automatic conversion from radius to chamfer and different edge and workpiece thicknesses. Control Power Control PC 22 OVERVIEW OF UNIT ASSEMBLY: – RELEASE AGENT SPRAYING UNIT – JOINING MILLING UNIT – GLUING PART A20 WITH 2 ROLLS Application unit PU 65 (Teflon-coated for PU gluing) – CROSS-CUT UNIT HL84 – PRE-MILLING UNIT – FK11 SHAPE MILLING UNIT – FREE SPACE UNI MILLING UNIT UF10 – PROFILE SCRAPER PN10 – FINISHING UNIT (with detergent information) – Feed rate 20 m/min – Total length 8635 mm 2. WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 12-22 mm ¦ 60 mm – For workpiece thickness 23-40 mm ¦ 105 mm – Workpiece protrusio ...

pressure: 45,0 t chamfer lenght: 2050 mm distance between columns: 1600 mm column arm: 300 mm stroke: 150 mm dayligth: 395 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 70,0 mm/sec table width: 60,0 mm table height: 905 mm oil volume: 150 l operating pressure: 340 bar voltage: 400 V total power requirement: 5,5 KW weight of the machine ca.: 3500 kg range L-W-H: 2900 x 2100 x 2420 mm good / well-maintained condition () Furnishing: - DELEM CNC control model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library including new screen (installed 11/2023 .. 1.200 euros) - CNC controlled axes: Y1 + Y2 / X / R axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - manual adjustment of the 2x stop fingers (Z axis) - AMADA-SYSTEM A upper tool clamping, including upp ...

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 255 mm stroke: 215 mm dayligth: 410 mm table height: 890 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 160 ltr. total power requirement: 5,5 kW weight: 7200 kg range L-W-H: 3750 x 1450 x 2500 mm Furnishing: - electro-hydraulic press brake - CNC CYBELEC EURO III control unit - Control panel, right front - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - freely movable 2-hand/foot control - side protection device (protective grille) - rear protective device (protective grille) - Operating instructions machine + control Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9308337 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 255 mm stroke: 165 mm dayligth: 360 mm table height: 890 mm ajustment speed: 85.0 mm/sec working feed: 6,5 mm/sec back stop - adjustable: max. 500 mm oil volume: 100 ltr. total power requirement: 4,0 kW weight: 4600 kg range L-W-H: 2700 x 1450 x 2400 mm Machine from a workshop for the disabled maintained condition () Furnishing: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit high resolution screen Clear, concise menus in the operators language Tools and products library - Control panel, right front - CNC controlled axes: Y1 + Y2 + X axis - CNC electric back gauge (X axis) - 2x manually adjustable stop fingers - AMADA-SYSTEM A upper tool adapter including upper wedge crowning very many bending/insertion tools (stamps + matrices) - 2x front material/sheet metal support arms  ...

pressure: 165 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 450 mm stroke: 250 mm dayligth: 440 mm ajustment speed: 100 mm/sec working feed: 1-10 mm/sec return speed: 120 mm/sec table height: 950 mm oil volume: 250 l operating pressure: 265 bar voltage: 380 V total power requirement: 18.5 KW weight of the machine ca.: 12600 kg range L-W-H: 3670 x 1830 x 3130 mm Machine in good / well-maintained condition () Furnishing: - DELEM CNC control - model DA 65 Swivel control panel, front right 2D graphical programming & product display Tool & program library - CNC controlled axes: Y1 + Y2 / X / R / Z1 + Z2 axis - CNC controlled back gauge (X axis) - CNC controlled height adjustment from the back gauge (R axis) - CNC controlled adjustment of the stop fingers (Z axis) - CNC controlled pneumatic table crowning (V axis) - GASPARINI hydraulic upper tool clamping - GASPA ...

pressure: 90,0 t chamfer lenght: 2600 mm distance between columns: 2050 mm column arm: 310 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 80,0 mm/sec back stop - adjustable: ca. 725 mm stroke: 120 mm dayligth: 475 mm table height: 860 mm oil volume: 130 ltr. total power requirement: 11,0 kW weight of the machine ca.: 5500 kg. good condition () Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe f ...

pressure: 300 t chamfer lenght: 3050 mm quantity of oil: 400 l dimensions: 4550x3000x3700 mm weight: 19000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wood Her Tria 120 Full car. Edge magazine Full car. Roller magazine - cross-cut shears Banding - 20 mm CARTRIDGE PU GLUING STATION Flush caps Flush - Chamfer - Radius Milling/Digital - 20 mm Soundproof booth from retirement Machine is WORKSHOP OVERHAULED

pressure: 180 t chamfer lenght: 3700 mm distance between columns: 3250 mm throat: 270 mm stroke: 220 mm ajustment speed: 80,0 mm/sec working feed: 10,0 mm/sec return speed: 58,0 mm/sec dayligth: 395 mm table width: 200 mm work height max.: 870 mm oil volume: 210 ltr. total power requirement: 15,0 kW weight of the machine ca.: 12100 kg. range L-W-H: 4200 x 1470 x 2550 mm from a maintenance workshop () Furnishing: - conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electric back gauge, with ball screws (X axis) with 2x manually adjustable stop fingers Fine adjustment via handwheel at the front, with analogue position display - electro-motor adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools / additional divided tools - 1x rotating Multi V u ...

pressure: 100 t chamfer lenght: . mm distance between columns: . mm total power requirement: . kW weight of the machine ca.: 8 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 3100 mm : 600 mm : 150 mm Stroke: 200 mm distance between columns: 2550 mm table height: 925 mm oil volume: 260 l weight: 9800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 3200 mm distance between columns: 2740 mm stroke: 400 mm Center of spindle to wall or column: 420 mm dayligth: 650 mm engine output: 32,5 kW oil volume: 350 l Control: total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4,75 x 2,80 x 3,60 m Only 5406.9 operating hours read • Delem DA-65W control • LazerSafe light barrier • Controlled axes: Y1, Y2, X, X1 (oblique), Z1, Z2 • 2 x support arms with parking position on the side • CNC controlled crowning • Hydraulic tool clamping at top + bottom • Extensive tool set, with very large dies for machines / steel construction The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.