casting used for sale

Manufacturer: Schultheiss Type of Machine: Vacuum Casting Machine Year of Manufacture: 2017 Power Connection: - TN-C Network: 3x400V, 50Hz/PE - Power: 18 kVA - Current: 27.6A - Fuse: 3x35A Cooling Water: - Pressure: 3.5/8 bar - Temperature (min/max): 18°C/32°C - Flow Rate: 85 l/min Compressed Air: - Output: - Voltage: 300V - Frequency: 4 kHz - Power: 150 kA - Energy: 3200 kWs CE Marked: Yes Find more here - / Contact us at -

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Multiplier piston for die-casting machine TF 1350, SC1400, 161104501, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Piston diameter 219mm, - Piston rod diameter 115mm, - Total length 470mm, - approx. 70 kg - Including the piston rings required for the piston

Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Multiplier cylinder for die-casting machine TF 1350, SC1400, 162007110, Italpress, used - overhauled Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The part was bought from a spare parts store of a company, has been overhauled by a specialised company and is in a very good condition and fully functional. - Suitable for Italpress TF1350 die-casting machine - Cylinder inner diameter 220mm, - Cylinder outer diameter 270mm, - Total length 420mm, - approx. 65 kg - Including the required sealings

4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg

Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h

Used Thinking Super Cascom Dental Die Casting Machine Year of manufacture : 2014 Think compressor ! Year of construction : 2015

Inv. Num. : 5724 Type: GDM H-400B DC Producer: Bühler Created: 1991 Parameters: Clamping force: 4600 kN Plate size: 990x990 mm Distance between tie rods: 640x640 mm Tie rod diameter: 120 mm Opening the mold: 250-780 mm Injection force: 240 kN Weight: 16600 kg Machine dimensions: 7500x2500x2400 mm Accessories: Automatic maintenance and dosing furnace STRIKO Automatic spraying equipment from Wollin 2-Axis Casting Removal Device - Pickmat Conveyor belt for castings with cooling of the castings by means of fans Scissor press LHS-15. The conversion pump has run approx. 15,000 hours

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

Inv. Num. : 8161 Type: RSO 32 Producer: Reinhardt Created: 2008 Parameters: The machine is in good condition.

DL-2400 THREE LAYER CASTING MACHINE

30 Round Knitting Plates Casting 7 pcs Different sizes and machines Bakery condition Partly slightly damaged Total price

A cold chamber die casting machine Urpemak for aluminium is available. Clamping force: 50t, platen width: 500mm, tie bar spacing: 500mm, shot weight: 50cm³, ejector force: 6400kg, connected load: 11kW, weight: approx. 4900kg. An on-site inspection is possible.

Double Filling Hand Former Casting Line, 2 unit May contact me at: sywee@topglove.com.my

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250,  ...

Split nut, TR375x12, 924399, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr375x12, 560x560x435mm high. 700kg Nut for automatic SZ F./PI. GDK/3800/4100 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500 The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra die casting machine, TR330x10, 11505195.10, Druckguss Servive, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr330x10, 2x590x275x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded LOCATION : VERMEZZO (MI) Auction-ID: A7-43767-63

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

Cartridge Valve head for die casting machine IDRA 2500, C13DEC107E50/0U99009900, Parker, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - has very slight storage marks, no effect on function 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. ...

Auction-ID: A1-45406-60

Manufacturer: Frech Model: DAK 315S Year of Manufacture: 1996 Type of Machine : Cold Chamber Die Casting Machine Control System: Frech DataControl Shot Count: At least 1,147,108 (indicative, hardware change recorded) Condition: Fully production-ready, currently still connected and operational Included: Striko Westofen W455 holding furnace Technical Specifications - Clamping Force: 3,150 kN - Opening Force: 10,000 daN - Closing Stroke: 500 mm - Adjustable Opening Stroke: Yes - Ejector Force / Retraction Force: 159 / 82 kN - Ejector Stroke: 120 mm - Die Height Min-Max: 300 - 700 mm - Platen Size: 900 x 900 mm - Tie Bar Spacing: 550 x 550 mm - Tie Bar Diameter: 110 mm - Injection Position: 0 / -80 / -160 mm - Maximum Injection Force: 350 kN - Injection Stroke: 430 mm - Shot Sleeve Diameter: 50 / 60 / 70 / 80 mm - Shot Volume: 563 / 811 / 1103 / 1441 cm3 - Specific Injection Pressur ...