cast film used for sale

30 Round Knitting Plates Casting 7 pcs Different sizes and machines Bakery condition Partly slightly damaged Total price

Cast iron clamping cube 2 faces Length: 1000 mm Height: 600 mm Depth: 800 mm T-slots dimensions: 38 x 22 mm Weightapprox: 600 kg

1 set of heavy-duty castors Fabr. YALE, roll diameter 80 mm 1 x swivel castor, 2 x strarr castors little used

Locking block for die casting machine GDK2500 by Frech, PADS1117.400, Parker, overhauled-as good as new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Refurbished! The locking block was overhauled by Parker, is in the original packaging and is in an immediately usable, top condition. The locking block can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Locking block, Parker, PADS1117.400, Suitable for the GDK 2500 machines from Frech/Müller Weingarten The block was still delivered to machines from Müller Weingarten and has SAE connections. Art. 937009 Weight 650kg Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D ...

Cylinder part for Multi for GDK3500 die casting machine, 931732, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The cylinder part for Multi comes from a spare parts warehouse at a production facility, has always been stored in a dry, sealed environment, is new and fully functional. The cylinder part for Multi item 931732 from Frech/Müller Weingarten. Suitable for Frech/Müller Weingarten GDK 3500 machines with 185-tonnes or 220-tonnes units.. Weight 720 kg. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250,  ...

Materials: CPP // Film Width (Max): 2800 mm

Split nut, TR375x12, 924399, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr375x12, 560x560x435mm high. 700kg Nut for automatic SZ F./PI. GDK/3800/4100 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500 The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine GDK2500, TR300x10, 946263, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D500/400/340mmx360mm high. Approx. 230kg The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D500x315mm high. Approx. 230kg Tie bar expansion nut for die casting machine IDRA 3300. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra die casting machine, TR330x10, 11505195.10, Druckguss Servive, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr330x10, 2x590x275x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Split nut for Idra 2500 die casting machine, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Split nut, Tr300x10, 2x550x250x285mm high. Approx. 540kg With sliding bushes The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460006160202, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D510/400/365x315mm high. Approx. 240kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Alstom 3 Phase Cast Resin Transformer TTG 1020-4 transformer from 2002, complete (closed module). 1 available 21 KV / 400 V, 50 Hz Manufacturer: Alstom Model: TTG 1020-4 Type: Cast resin transformer Coil Material: Copper Serial Number: 425427/1 Power [kVA]: 1,000 Input [KV]: 21 / 20.5 / 20 / 19.5 / 19 Output [V, A, Hz]: 400 / 1,443 / 50 Around [kV]: 24 Rated current [A]: 28.87 Year of Make: 2002 Weight [kg]: 4.590 Dimensions LxWxH [cm]: 170 x 120 x 190

Piston head for Frech die-casting machine, bronze, 931603, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Piston head for Frech/Müller Weingarten die casting machine, Outer diameter 251.5 mm, thread inner diameter 196.5 mm, height 200 mm, 34 kg

A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...

KNITTING PLATE FOR ERIKA REKORD SEMI-AUTOMATIC SIZE 2 30 PCS ( 3 pieces )for all semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

FORTUNA KNITTING PLATE SIZE 4( 3 pieces )For fully and semi-automatic machines of the manufacturer Fortuna size 4very high-quality productmade of very durable plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD BEAN-TO-CUP MACHINE SIZE 2 ( 3 pieces )for all bean-to-cup machines size 2 very high-quality product made of very hard-wearing plastic30-piece5 mm thickDetails see picture

KNITTING PLATE Â for ERIKA REKORD FULLY AUTOMATIC MACHINE SIZE 3 ( 3 pieces )for all fully automatic machines size 3 very high quality product made of very durable plastic30 pieces 30-100g5 mm thickDetails see picture

FORTUNA KNITTING PLATE SIZE 3 ( 3 pieces )the above price is for 3 piecesFor fully automatic and semi-automatic machines of the manufacturer Fortuna size 3very high quality productmade of very durable plastic5 mm thick30 piecesDetails see picture

EBERHARDT KNITTING PLATE SIZE 4 ( 3 pieces )for the Optimat and Piccolo models size 4 of the manufacturer Eberhardt for all fully automatic and semi-automatic machines size 4 very high quality product made of very durable plastic30 pieces 5 mm thickDetails see picture

WP KNITTING PLATE SIZE 3, 22 PCS ( 3 pieces )22 pcs.for all Rotamat and 3/4 vending machines from W&, Pvery high quality product made of very durable plastic5 mm thickDetails see picture

WP KNITTING PLATE SIZE 3, 30 PCS ( 3 pieces )30 pcs.for all Rotamat and 3/4 vending machines from W&, Pvery high quality productmade of very durable plastic5 mm thickDetails see picture

EBERHARDT KNITTING PLATE SIZE 2 ( 3 pieces )for all fully automatic and semi-automatic machines size 2 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

KNITTING DISC FOR ERIKA RECORD SIZE 4 30 PCS ( 3 pieces )For fully automatic and semi-automatic machines Erika Record size 4very high quality productmade of very durable plastic30 pieces5 mm thick40-120 grams per dough pieceDetails see picture

EBERHARDT KNITTING PLATE SIZE 3 ( 3 pieces )for the models Optimat and Piccolo size 3 of the manufacturer Eberhardtfor all fully and semi-automatic machines size 3 very high quality product made of very durable plastic30 pieces5 mm thickDetails see picture

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 80mm NEW! ( 4 pieces )Heat-resistant wheel à ̧ 80 mmin heavy version resistant -20 to +250Âcâ  Data:Wheel à ̧: 80mm Wheel width: 35mm hole à ̧: 12mm Load capacity: 150Kg per roller ́s see picture for details 

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 100mm NEW!  Heat-resistant wheel à ̧ 100 mm with ball bearings in heavy design resistant -25 to +280Âcâ  Data:Wheel à ̧: 100mm Wheel width: 40mm Hole à ̧: 15mm Load capacity: 240Kg per rollerDetails see picture

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing blank: for Ø 35 mm shaft -made of: gray cast iron -Number: 12x stock available -Price: per piece -Dimensions: 70/52/H75 mm -Weight: 1.2 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gray cast iron -Number: 7x bearings available -Price: per piece -Dimensions: 92/70/H85 mm -Weight: 2.0 kg/piece

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 100mm NEW!  8 4 pieces )Heat-resistant swivel castors with (bright galvanized)Wheel à ̧ 100 mm with ball bearingsin heavy design resistant -25 to +280Âcâ  Data:Wheel à ̧: 100mm Wheel width: 40mm Mounting hole à ̧: 12mm Overall height: 128mm Load capacity: 150Kg per castorDetails see picture

Heavy-duty casters, heavy-duty wheels, tires, heavy-duty double swivel casters, heavy-duty double fixed casters -Manufacturer: Tente, heavy-duty swivel casters, 4 pieces -Features: Ball bearings, rollers type 07/15 Wheel dimensions: 200 x 80 mm, 2 pieces per stand -Mounting plate: Dimensions see photos -Price/Sale: complete -Dimensions each: 410/345/H290 mm -Total weight: 360 kg, 90 kg/pc.

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 80mm NEW!  ( 4 pieces )Heat-resistant swivel castors with (bright galvanized)Wheel à ̧ 80 mmin heavy version resistant -20 to +250Âcâ  Data:Wheel à ̧: 80mm Wheel width: 35mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 106mm Load capacity: 150Kg per roller Details see picture

Rack Trolley Castors / Heat-Resistant Swivel Castors à ̧ 100mm NEW!  ( 4 pieces )Heat-resistant swivel castors with (bright galvanized)Wheel à ̧ 100 mm with ball bearingsin heavy design resistant up to +280Âcâ  Data:Wheel à ̧: 100mm Wheel width: 40mm Plate mounting: 105x85mm Hole spacing: 80x60mmHole à ̧: 9mm Overall height: 130mm Load capacity: 240Kg per rollerDetails see picture 

Heavy-duty castors, heavy-duty wheels, tires, heavy-duty double swivel castors, heavy-duty double fixed castors -Manufacturer: Vogel /Baumann, heavy-duty castors 4 pieces from electric forklift EVS 25/14 -Rim: Vogel RV 5450 0250 00 -Tires: Ø 200 x 80 mm -Shipping/Price: complete -Dimensions each: Ø 200 x 165 mm -Weight: 9.4 kg/piece

Cartridge Valve head for die casting machine IDRA 2500, C13DEC107E50/0U99009900, Parker, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - had been in storage for quite some time, - has very slight storage marks, no effect on function 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. ...

Manufacturer: Frech Model: DAK 315S Year of Manufacture: 1996 Type of Machine : Cold Chamber Die Casting Machine Control System: Frech DataControl Shot Count: At least 1,147,108 (indicative, hardware change recorded) Condition: Fully production-ready, currently still connected and operational Included: Striko Westofen W455 holding furnace Technical Specifications - Clamping Force: 3,150 kN - Opening Force: 10,000 daN - Closing Stroke: 500 mm - Adjustable Opening Stroke: Yes - Ejector Force / Retraction Force: 159 / 82 kN - Ejector Stroke: 120 mm - Die Height Min-Max: 300 - 700 mm - Platen Size: 900 x 900 mm - Tie Bar Spacing: 550 x 550 mm - Tie Bar Diameter: 110 mm - Injection Position: 0 / -80 / -160 mm - Maximum Injection Force: 350 kN - Injection Stroke: 430 mm - Shot Sleeve Diameter: 50 / 60 / 70 / 80 mm - Shot Volume: 563 / 811 / 1103 / 1441 cm3 - Specific Injection Pressur ...

Very good condition. Free loading, shipping possible, please call if you have any questions.

Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: 0/-80/-160mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding ...

Standing desk steel/wood with castors, simple model

Technical Specifications Manufacturer: EFACEC – Portugal Model: PowerCast Type: Cast Resin Dry-Type Transformer (Encapsulated) Quantity Available: 2 Units Rated Power: 3,700 kVA Year of Manufacture: 1999 Frequency: 50 Hz Phases: 3 Cooling: AN (Air Natural) Vector Group: YNd7 HV Voltage: - 15,000 V LV Voltage: 6,300 V Short Circuit Impedance: 6.8% HV Current: 142.4 A LV Current: 339.1 A Insulation Class: Class F Protection Rating: IP00 Approximate Weight: 8,200 kg