cast film used for sale

Manufacturer: Schultheiss Type of Machine: Vacuum Casting Machine Year of Manufacture: 2017 Power Connection: - TN-C Network: 3x400V, 50Hz/PE - Power: 18 kVA - Current: 27.6A - Fuse: 3x35A Cooling Water: - Pressure: 3.5/8 bar - Temperature (min/max): 18°C/32°C - Flow Rate: 85 l/min Compressed Air: - Output: - Voltage: 300V - Frequency: 4 kHz - Power: 150 kA - Energy: 3200 kWs CE Marked: Yes Find more here - / Contact us at -

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

spindle diameter: 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min total power requirement: 22 kW weight of the machine ca.: 23.000 t dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min Control: total power requirement: 22 kW weight of the machine ca.: 23.000 kg dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

spindle diameter: 100 mm travel -x axis: 2000 mm travel -y axis: 1200 mm travel -z axis: 1000 mm spindle stroke - max.: 500 mm table surface area: 1250 x 1250 mm table rotating: 360 ° max. table load: 8000 kg spindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/min feeds: 2 - 1000 mm/min rapid traverse: 6 m/min drive capacity - spindle motor: 14 kW coolant: voltage: 380 V control: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kW weight of the machine ca.: t dimensions of the machine ca.: 4,20 x 3,00 x 3,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 2000 mm y-travel: 1200 mm z-travel: 1000 mm w-axis: 500 mm control: Heidenhain type: TNC 155 turning speeds: 20-2000 U/min spindle taper ISO: 50 table surface area: 1100x1300 mm angular milling head: Feed: 0-5000 mm/min Rapid movement: 8000 mm/min workpiece weight: 3000 kg spindle motor: 15 kW total power requirement: 27 kW weight of the machine ca.: 14 t dimensions of the machine ca.: 5,3x2,9x3,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, easily machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Alloy powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packaging unit: 3.0 kg New ! Dimension ( packaging ): 85 x 85 x 230 mm

Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg.

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve. Shut-off valve -Manufacturer: Castel, collector valve/valve membrane, unused in original packaging -Type: 6110/22 -Price: per piece -Number: 5 piece -Dimension box: 100/50/H40 mm -Weight: 0.1 kg/piece

Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Stick electrodes 3.25 x 350 -Type: CP 33033 -Analysis: 0.1C-18Cr-8Ni-6Mn remainder Fe. -Price: per package -Number: 4 packages available -Weight per package: 5.2 kg

Cast iron bed Length: 3650 mm Width: 1370 mm Thickness: 150 mm 11 T-slots - dimensions 32 x 18 mm Slots spacing: 125 mm Assembly in 2 parts Dimensions of each part: L 1820 mm x W 1370 mm x H 150 mm Total height on base 875 mm Weight: approx 4 T

Description Corona Treatment for Cast Lines

Cast iron bed 2600 x 2000 x 350 mm - No 1 Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.

Key data: 1470 mm, 1400 mm, 750 mm

2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Weight: 2,3 T / unit

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Tie bar expansion nut, adjustment nuts and split nuts for die casting machines from IDRA, Frech/Müller Weingarten, OP Die Casting Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Condition New The mother is new and fully functional. The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar expansion nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300

boring spindle diameter: 130 mm taper: ISO 50-7388/1 milling spindle diameter: 200 mm direct current motor: 22 kW : 10-1600 U/l rapid traverse: der Achsen 6000 m/min z-axis: 800 mm y-axis: 2100 mm x-axis: 3000 mm w-axis: 1500 mm Size of table plate: 1250 x 1500 mm table movement: max. 10000 KG kW : im Eilgang 3,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connectors, plugs, terminal plugs, coil plugs, Fast-On connectors, cable connectors, wired connectors, magnetic coils -Manufacturer: Castel, magnetic coil cable connector wired connector -Type: 9900/X66 -Connector: Fast-On connector -Number: 9 cable connectors available -Price: per piece -Packaging dimensions: 140/120/H35 mm -Weight: 0.1 kg/pc

23 pieces, Polyethylene flat film, residual stock, Width 420 mm Thickness: 25 microns Barrel length per roll:1500 meters needled suitable for shrinking "There are more pallets available" No guarantee is assumed for the technical data given in the description.

8 pieces, Polyethylene semi-tubular film, residual stock, Width 550 mm Thickness: 30 microns Barrel length per roll:700 meters needled suitable for shrinking No guarantee is assumed for the technical data given in the description.

13 pieces, Polyethylene flat film, residual stock, Width 420 mm Thickness: 25 microns Barrel length per roll:1500 meters needled suitable for shrinking "There are more pallets available" No guarantee is assumed for the technical data given in the description.

BANDERA SINGLE LAYER BLOWN FILM EXTRUDER, for LDPE MDPE + RLDPE, 3-stations Piovan volumetric dosing uniit, Screw diam. 80 mm., 200 mm. die, dual-flow Garba Plast head 200 mm (new in 2022), pull off unit, single rewinding unit 1.200 mm. wide, c.a.drive with new inverters, Average throughput rate 100 kg/h, The line can be inspected any time., Recently used for garbage bags, it includes a 1-color printing group, corona treatment, tower included, electric cabinet for conplete management, immediately available, availability: Immediate, PRESENT CONDITIONS: running and testable, ACCESSORIES: corona treatment+1-col. printer

General SKU212T513 LocationBarneveld MakeBuss Mach.No.60429-1 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure vapour evaporator9 Bar Main Features Surface5.7 m2 Specified Features - Falling film evaporator Condenser:trickling film cooler MakeBuss SMS Mach.No.60429-1 Year of construction1994 Heating surface5,7 m² Tube capacity400 Ltr. Number of tubes:61 Tube diameter25 mm Tube length1250 mm Shell capacity65 Ltr. Max. temperature-10/200 °C MaterialStainless steel 1.4571 (316Ti) Information Year of construction1994 Extra Specificationswith vessel: ø600x1000 mm, 280 ltr., outlet: DN80Falling film evaporatorsBuss-SMSColumns > Falling film evaporatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU212T520 LocationBarneveld MakeBuss-SMS Mach.No.0012 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure vapour evaporator10.5 Bar Main Features Surface4.3 m2 Specified Features - Falling film evaporator Falling film evaporatorcheck Condenser:check Heating surface4,3m² Tube capacity100 Ltr. Number of tubes:13 Tube diameter44,5 mm Tube length2500 mm Shell capacity200 Ltr. Max. temperature-10/200 °C MaterialStainless steel 1.4539 (904L), Stainless steel 1.4571 (316Ti) Information Year of construction1994Falling film evaporatorsBuss-SMSColumns > Falling film evaporatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKUR0803 LocationBarneveld MakeJaeggi Güntner (CH) Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell7 Bar Vacuum possible shellcheck Working pressure tubes9 Bar Tubular vacuum possiblecheck Working pressure vapour evaporator13 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface22 m2 Specified Features - Falling film evaporator Falling film evaporatorcheck Capacity460 kW Number of stages:1 Heating surface22 M2 Tube capacity500 ltr. Number of tubes:112 Tube diameter44,5x2mm Tube length1480mm Shell capacity280 Ltr. Max. temperature200 degr. C MaterialStainless steel 1.4435 (316L) Falling film evaporators Heat exchangercheck Verticalcheck Heating surface23 m2 Tube capacity500 ltr Number of tubes:112 Max. temperature-20/200 degr. C Shell capacity280 ltr Shell diameter700mm Shell  ...

inner diam. 350 mm.

General SKU202X013 LocationBarneveld CEcheck MakeSchott Engineering GmbH / QVF Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure vapour evaporator1 Bar Main Features Surface1.2 m2 Specified Features - Film evaporator MaterialBorosilicate Glass 3.3, Stainless steel 2.4602 (Hastelloy C-22) Film evaporators Falling film evaporatorcheck (with wiper system) Capacity1,2 m² Number of stages:1 Max. temperature150 °C Information TypeSonder DSV300/E Mach.No.95004 / 16128 Year of construction1995 Extra Specifications- Not complete system Volume: 147 l. Film evaporatorsNew arrivalsQVF GlasstechnikColumns > Film evaporatorsNew arrivalsBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKUR0363 LocationBarneveld MakeBuss-SMS Verfahrenstechnik GmbH (D) Pressure Working pressure0.5 Bar Vacuum possiblecheck Main Features Surface73 m2 Specified Features - Falling film evaporator Falling film evaporatorcheck Capacity4000 Ltr/Hr Heating surface73 m2 Tube capacity1035 Ltr Number of tubes:80 Tube diameter44.5 mm Tube length6620mm Shell capacity998 Ltr Max. temperature350 Degr. C. Internal spiral(13 Ltr) Max. temperature350 Degr. C. MaterialStainless steel 1.4541 (321) Information TypeFallfilmverdampfer 73 m2 Mach.No.22.11.6351/1 Year of construction1994Falling film evaporatorsBuss-SMSColumns > Falling film evaporatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU279X359 MakeFlavourtech TypeCentritherm CT1-09RM: vacuum centrifugal thin-film evaporator No.CT1-40EC-001A Year of construction2014 Mounted on framecheck Specified Features - Film evaporator MaterialStainless steel 1.4401 (316), Stainless steel 1.4435 (316L) Information LocationBarneveld Floorspace2,20 x 1,60 m Total height3,00 m Extra Specifications Design: single-effect Technology: spinning cone (rotating cone) Operation: continuous Product film thickness: ~0.1 mm Residence time: ~1 s Suitable products: heat-sensitive, high-viscosity liquids Sugar solution concentration range: 12 °Bx → 65 °Bx Sugar solution evaporation capacity: 50 kg/h Water evaporation capacity: 63 kg/h Heating medium: steam (jacket / steam chamber) Vacuum system: vacuum pump (non-condensables removal) Vapour handling: condenser + condensate pump Key outputs: concentrated pro ...

General SKUR0800 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure vapour evaporator7 Bar Main Features Surface10 m2 Specified Features - Falling film evaporator Falling film evaporatorcheck Heating surface+/- 10m2 Tube capacity225 ltr Number of tubes:24 Tube diameter50mm Tube length2490mm Shell capacity349 ltr Max. temperature200 MaterialStainless steel 1.4435 (316L) Information MakeJaeggi Bern (CH) Mach.No.1437 Year of construction1985 Extra Specificationstopcover is missing Falling film evaporatorsJaeggi BernColumns > Falling film evaporatorsBrand > Jaeggi Bern What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

LAB FILM EXTRUDER BETOL 2525, for testing granules, single screw extruder, screw Ø 25 mm, blown film die head 60 mm., 3,0 kw d.c. motor and drive., 4 heating zones on barrel., 2 die head heating zones, cooling on screw and throat, calibration cage, nips and rolls, tower, 500 mm wide double collection frame, control panel, type: lab extruder

General SKU017R036 MakeBertrams/Haberstich Typedia. 700 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure vapour evaporator0 Bar Main Features Surface2 m2 Specified Features - Falling film evaporator Falling film evaporatorvacuum evaporator (1x) Heating surface2,0 M2 Number of tubes:37 Tube diameter27mm Tube length600mm With vapour evaporatorcheck MakeBertrams/Haberstich Typedia. 700 Capacity300 Ltr. MaterialStainless steel 1.4435 (316L) Information Extra SpecificationsVapour evaporator stainless steel 1.4435 (316L)Falling film evaporatorsDiscountHaberstich BaseColumns > Falling film evaporatorsDiscountBrand > Haberstich Base What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU023C129 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure vapour evaporator6 Bar Main Features Surface12.5 m2 Specified Features - Falling film evaporator Falling film evaporator(1x) Heating surface12,5 m2 Tube capacity120 Ltr Number of tubes:34 Tube diameter40mm Tube length3000mm Shell capacity210 Ltr Max. temperature140 Degr. C. Capacityvessel 550 Ltr With jacket(coil), Capacity 10 Ltr MaterialStainless steel 1.4571 (316Ti)Falling film evaporatorsDiscountRutzColumns > Falling film evaporatorsDiscountBrand > Rutz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU256W337 MakeSulzer LocationBarneveld CEcheck TypeUV. 14m2 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes8 Bar Main Features Shell (Material)Stainless steel Tube (Material)Hastelloy Surface14 m2 Specified Features - Falling film evaporator MaterialStainless steel 1.4571 (316Ti), Stainless steel 2.4602 (Hastelloy C-22) Falling film evaporators Heat exchangercheck Verticalcheck Heating surface14m2 Tube capacity276 l. Tube length1400 mm Max. temperature-10°C/+200°C Shell capacity180 l. Shell diameter500 mm Shell length2400 mm Max. temperature-10°C/+200°C Shell connectionsDN270 and DN200 Cover connectionsDN150 Information No.11083 Year of construction2012 Floorspace1,10x1,10 m Total height2,50 m Weight560 kgFalling film evaporatorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Ot ...

small die-head with 60, 80 or 100 mm die-insert, with cooling ring

Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg