casagrande used for sale

the 200l barrel original is locked

Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line General information: ALLOYS: 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. INSPECTION: The line can be inspected under power. TRIAL CAST: They cannot cast a trial coil. Some movement of the equipment can be seen. ISSUES: The launder lining will need to be replaced (which has to be done when it is moved anyway). The bottom caster roll shell is damaged and needs to be replaced. The good news is that the roll core (the expensive part) is in excellent condition. Mfc.: CASTAL Ltd. Strip width: 1350 mm – 53.15” Strip thickness: max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! Casting speed: 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved Caster configuration: Horizontal – 15 degree tilt

Qty. 1 Second-hand Twin-Roll aluminium strip caster Manufacturer: Castal Ltd. Built: Type: MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster Cast Strip Width: 1350 mm max 53.15" Cast Strip Thickness Max.: 12.0 mm .472" Min.: 4.2 mm .165" (4.2 mm achieved by production, not just design capacity) Casting Speed: 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved Caster Configuration Horizontal: 15 degree tilt

Casing for cooked and boiled sausage without smoking. Remaining stock approx. 3 pallets

Pallet with various scales, cash registers and label printers, brands among others.

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

Extrusion line for the production of heat-shrinkable OPS (oriented polystyrene) film Product structure A/B/A Recyclable materials (mixed) SBC, GPPS Thickness 40-60 microns % shrinkage 70-72% Net width / when leaving TDO 2780 / 3200 Main extruder ZSK Mc70 plus Coextruder 50 mm Static mixers - in the main extruder and co-extruder lines. Die - Nordson Autoflex VI-R H40 Die 750 mm (28 bolts) Roll stack - 2 shafts (with mirror surface - chrome) MDO 6 shafts (1, 2 - preheating; 3-4 stretching 1:1.2; 5.6 - annealing) 2 thickness measurement sensors from NDC (USA, UK) with automatic thickness control, new control equipment installed in 2018. (computer and software), sensors - overhaul in the UK from the manufacturer (NDC) - 2019-2020 TDO stretch up to 1:5 Filmatic winder from W&H (Germany), Max. roll diameter 580mm, expandable to 800mm line speed (mechanical) up to 50 m/min Volt ...

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

Description Brand Caselli ID 7207 Status Active Price 1.000 € + VAT Year of manufacture 2014 Location Oradea (RO) Pneumatic chair assembly press Caselli manufactured in 2014. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

AC - DC - TIG welding machine, make CASTOLIN - EUTECTICType Castowig 200 GW, machine -No: 3704, year of construction 1990DC and AC versionTechnical specifications:Power range: 5 - 250 A60% ED at: 250 A100% ED at: 200 A.Degree of protection: IP 21Cooling method: FInsulation class: FExternal dimensions: 1100 x 530 x 800 mmWith- water-cooled version- TIG hose package with torch- Earth cable with clamps- manometer- Mobile version- TIG and stick electrode weldingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined automatic pharmaceutical machine : case packer (case packing unit) + palletizer Brand : PESTER Model : SLP 2K Year : 2010 Capacity: up to 8 cartons/min Case packing: shaping, filling, taping on the case Palletizing: Kuka robot arm - Positioning, case control on pallets. Pallets 1200 x 800 and 1200 ? 1000 Sizes Case Size Mini / Maxi: 230 x 230 x 170 mm / 450 x 320 x 320 mm Max. pallet height: 1400 mm Carton size at machine input min/max : 30 x 12 x 66 mm/ 440 x 150 x 250 mm

Spindle swivel: Yes -45 to 45Â; Height adjustment: electric; Swivel adjustment: electric; Stop adjustment: manual; Height display: digital; Swivel angle indicator: digital; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 interchangeable spindle system La ...

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Spindle swivel: Yes -45 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Stop adjustment: manual; Height indicator: mech. Counting display; Swivel angle indicator: mech. Counting display; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 ...

Description Brand Caselli ID 7208 Status Active Price 3.700 € + VAT Year of manufacture 2014 Location Oradea (RO) Wood drill for chair assembly Caselli manufactured in 2014 with 4 drill heads and motors. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Relief powder system Caslon Mini Supa Duchess; good condition; cleaned and tested; with an investor, which is sold as defective because parts are missing; Working width 330mm; Vibration function. Thermography machine Caslon Mini Supa Duchess; good condition; cleaned and checked; with feeder which one will be sold als spare part becuase of missing parts; working width 330mm; Joggers.

Thickness planer Casadei R51/ H3 Year of construction 1997 Manufacturer Casadei / Busselato Italy S/N 97-61-053 Working width: 510 mm Working height Max.: 300 mm Workpiece length min.: 250 mm Working height min.: 4 mm Maximum cut depth: 8 mm Table length: 860 mm Variable feed speed : 6 / 9 / 14 /22 m/min Knife sizes 4 pieces 510 x 35 x 3mm ( standard knife ) Knife head diameter: 120mm Knife head speed RPM 4600 Main motor: 5.5 kW Dimensions: 1120x960x1250 mm Weight: 643 Kg Electromotive height adjustment Feed roller on the table

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2300 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: pneumatic; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: digital; Feed speed: 5/8/12/18 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: articulated; Table rollers: no; Engine power: 7 kW; Engine braking: yes, automatic; Suction connection: 160mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 980; Stable steel-gray cast iron construction Size, ribbed dressing tables made of gray cast iron Smooth running due to high dead weight Four feed speeds Motorized thickness table stroke with two speeds and digital display Articulated pressure beam in infeed 4 knife shaft, pre ...

sliding carriage length: 3200 mm; cutting width with rip fence: 1270 mm; Max. cross cut width left from saw blade: 3200 mm; Max. cutting height 90°: 140 mm; Max. cutting height 45°: 99 mm; scoring unit: yes; height adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: motorized; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: scala; saw blade diameter: 400 mm; saw blade speed: 3000 - 4000 - 5000 U/min; motor power: 7,0 kW; motor brake: yes / automatically; suction connection: 80 mm / 120 mm; machine length: 3600 mm; machine width: 1900 mm; weight: 1600 kg; With swiveling 400 mm saw blade and preheating device. M version with motorized height and angle adjustment of the saw blade. - Sturdy cast steel construction guarantees precision, smooth running and durability - Smooth-runn ...

Carriage length: 3200 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Pre-scorer: yes; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Display saw blade angle: digital; Display cutting height: digital; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7.5 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Stable steel-cast iron construction Large contact surfaces due to standard table extension and widening cast iron saw table Fold-down rip fence with fine adjustment and round rod guide cut-to-length fence, extendable up to 3200 mm, with two folding stops Laterally ...

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

Working width: 520 mm; Planing shaft: tersa; Number of knives: 4; Dressing table length: 2720 mm; Dressing table adjustment: lever; Hollow and pointed joint adjustment: no; Display Spahnabnahme: Scala; Hollow and pointed joint display: -; Dressing stop angle adjustable: yes; Engine power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 870 kg; Large dressing tables made of cast iron The dressing table is adjusted by means of a precise parallelogram system, so that the distance between the table tips and the knife shaft remains the same in every adjustment position The large, stable dressing stop made of anodized aluminum is easily movable and can be tilted from 0Â - 45Â The inclination of the stop can be read from the workstation Standard with auxiliary stop Large four-knife shaft, precision-bearing Smooth running thanks to the precision unit and thanks to t ...

Working width: 6000 mm Working height: 3000 mm Number of cylinders: 4 St. loading dimensions L x W x H: 7.175 x 1.600 x 3.790 mm weight: 3700 kg Casolin Euro ------------------------- HYDRAULIC FRAME PRESS FOR WINDOWS AND DOORS CASOLIN MOD. EURO Frame press in an extremely stable steel construction. The machine also allows the pressing of already milled wing and frame parts. Working dimensions: 6000mm x 3000mm Installation dimensions: Total length: approx. 7,175 mm Installation height approx.: 3,790 mm + 340 mm (cylinders look when pressed maximum pressing height above) = 4,130 mm Loading dimensions: Length: approx. 7,175 mm Height: approx. 3,790 mm Weight: approx. 3,700 kg (technical data according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CASI roller conveyor accumulation roller conveyor 3000-687-610 RA1998 Make: CASI Running direction: both directions Roller width (RB): 610 mm Nominal/outer width (NB): 685 mm Length: 3000 mm Stowage space size: 760 mm Roller diameter: 50 mm Roller distance: 75 mm Motor Roller conveyors: Interroll EC100 24V Height frame: 90 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC100 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guide one-sided Side guides on both sides Condition: functional and visually good condition Features: condition: very good (used) scope of delivery: without supports and side guides Driven: YES Conveying length in mm: 3000 Roll division in mm: 75 nominal voltage: 24V Conveyor speed m / s: bis 1,25m/s Jam detection: Lichtschranke Stowage spaces: 4 Roll width in mm: 610 Nominal / outside width i ...

1 - Semi-automatic lower flap folder Manufacturer : Soco System Model: F-100-P Year : 2000 Carton size : Min. carton width: 320 mm Max. carton width: 520 mm Max. case length: 700 mm 2 - Automatic case and flap sealer / Tape sealing machine Manufacturer: Soco System Soco System Model: T-400 5-5-7 Year: 1989 Adhesive top and bottom closure. Capacity: Max. 18/min. Carton size : Mini: 200 x 120 x 95 Max: 550 x 460 x 470

Tilting Lifter San Cassiano ER 2 Year of construction: 2006 Condition: checked & cleaned Suitable for San Cassiano bowls Motorized bowl discharge Incl. Mesh fence with safety switch

Motor m. pump Perkins 3543 E 616T 6 cylinder turbo engine m. pump Clark KBEA Engine is sold as shown. Motor is fully functional Hours of operation: 5255 Comes from 750B case wheel loader

SURFACE PLANER CASADEI DS 510 second hand machine volt. 380/50 working width mm. 510 length of table mm. 2800 cutterblock 4 knives motor power Hp 5,5 net weight kgs. 750

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

Thread splicer machine for veneer type CASATI Z 1000 Volt. 380/50 CE mark : YES

Case rounding machine Unknown Model 600 Year 2000´s Working size 600 mm Available Direct

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Hole drill machine for wood Fabr. CASATI MACCHINE Type HF / SuperVertical boring head / boring bar with: 13 drillsDrilling direction: from aboveDrilling depth: 60 mmVertical stroke: 150 mmDrilling beam pivotable forwards by: 90 °Perimeter spacing center-center hole: 32 mmMotor Power Drilling Motor Vertical: 2 HPHorizontal drill head with: 3 drillsHorizontal stroke: 130 mmDrilling direction: from back to front, fixedHole pitch: 32 mmWorktable size: 2000 x 450 mmDrill table adjustment in y-direction: 70 mmMotor Power Drilling Motor Horizontal: 0.25 kWCompressed air: 6-8 barExternal dimensions: 2150 x 1380 x 1780 mmWeight approx: 160 kgWith:- pneumatic material tension (clamping stroke 26 mm)used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display planing thickness: mech. Counter; Feed speed: 5 / 8 / 12 / 18; Feed roller: steel; Pressure beams: articulated; Pull-out roller: rubber; Table rollers: no; Motor power: 9 kW; Suction port: 150mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 810 kg; Motorized thicknessing table stroke with two speeds Numerical display for working height Thickness table made of cast iron The thicknessing table is mounted on four large trapezoidal threaded spindles for maximum stability and precision Four feed speeds Optionally with two rollers in the thickness table Standard with noise protection and chip protection curtain on the workpiece inlet and outlet roller contact pressure adjustable Front feed roller with helical gear Pull-out roller with rubber ...

Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...

Amperage range maximum: 380 A Amperage range minimum: 0 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id 3178 MAKE Castolin Eutectic TYPE MIG Pulse 4003 HD YEAR 2012 SPECIFICATIONS Welding tower / boom height    MIG Pulse mm Number / Power source in  AMP 380 AMP AMP DIMENSIONS Length 1200 mm Width 700 mm Height 1400 mm

We can offer the following Flat- and satchel paper bag machine. Producer : Biagioni / Castaldini ( Italy ) Type : F 100 Year : 1995 Printer : 3 colour ( 4 colour unit ) Bag width : 80 - 300 mm Cut off : 180 - 720 mm With : Window unit With : 20 form plates With : 40 printing cylinders

Used Casadei mc 30/12 Wood CNC machining centre drilling head with 16 bits, joint cutter and pantograph Year 2010

Casadei Xenia 60 format saw sell format saw with scorer and tilting blade little used Year of manufacture: 2018

The scope of delivery includes: 01x Bale clamp, used Manufacturer: Cascade Catalog number: 28G32759R1 Serial Number: ALE491356-1R1 Working pressure max.: 100 bar Year of construction: 2006 Nominal load capacity: 1,200 kg Load centre of gravity: 500 mm Own centre of gravity: 286 mm Weight | Pcs.: 444 kg Currently in stock Available: approx. 01 pcs Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

This CASADEI LIBRA 35 wide belt sander machine wa made in the year 2019 in Italy. The machine has a working width of 1100 mm, working height of 4 - 170 mm, belt width of 1115 mm and a belt length of 1900 mm.

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

CASE PUMA CVX 195 TRACTOR : POWER : 195 HP new in 2010, was recently submitted to an overall service for maintenance, in very, very nice condition, clean NEW BKT rear and front tyres : 620/70/42 and 540/65/28 40km speed air conditionning continuously varialble speed Front linkage 3.9 tonne and coming along frontal 1.6 tonne weight DELIVERY ALSO POSSIBLE Les informations détaillées sont disponibles en Français sur demande Expédition possible

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, highly machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Alloy Powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packing unit: 3.0 kg New ! Dimensions ( packaging ): 85 x 85 x 230 mm

Metal powder alloy CASTOLIN ROTOTEC EXOTEC 29904 exothermic reacting metal powder alloy as primer for all ROTOTEC applications Quantity: 1kg New ! Dimensions: 90 x 90 x 130 mm

Casadei R51H3 thicknesser Working width 510 mm Working height 300 mm 5.5kw main motor 4-knife planing roller Traditional knives Planer roller with brake, CE Standard Work table with 4 supports One motorized roller is installed in the table to support the feed of the machine Feed rate adjustable on the gearbox in the range of 5/10/15/20 m/min