casadei scm group used for sale

Joining unit with slide cutter  Non-stick Spray Unit Automatic stripping and roll loading station Glue application with roller  Alternating basin for Pu glue (tot 2 basins)  Cross-cut and corner saw unit Eboning unit at the top bottom with nesting units Wing Scraper  Edge scraper blade with nesting unit  Buffing unit Machine length 315 cm  Sheet material from 8 to 50 mm on roll edge material from 0.4 to 3 mm Strip material from 0.5 to 5 mm

Key data: 1100 , 2 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Key data: 1350 , 3 , 160

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Key data: 950 , 1 , 160

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front

Key data: 1350 , 2 , 160

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Key data: 6 , 60 , 4000

Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Key data: 1100 , 1 , 160

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7

Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units  LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller  - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for the aggregates LED interior lighting Y version for RTC - Pneumatic on/off switch for the roller of the first unit ? R? - Pneumatic on/off switch for the roller of the second comb belt ? TC? - Split elastic and electronic sanding pad (56 graduation) - Electronic thickness adjuster SMART CONTROL S electronic control 10-inch color LCD touchscreen Motor power 15 kW

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Grinding width 950 mm  Steel roller for calibration  1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering  Automatic electronic operation control

Grinding width 1350 mm CE version V400/50 50 Hz Viewing window for visual access to the units LED lighting for indoor lighting Vacuum table with 3 kW electric fan Tynex Texturing Brush with Tynex Brush K46 Y-type - Pneumatic on/off for the roller of the first unit ? R? - Pneumatic on/off for the roller 2nd abrasive belt roller combination unit TC - Elastic electronic sanding shoe (56 graduation) - Electronic thickness adjuster FOX 1000S electronic control 10.4 inch touch screen 15 kW motor power 1-motor version

The Flexa 607 automatic edge banding machine is an extremely versatile machine with a high performance that puts it at the top of its category. Productivity: The high machining speed of up to 22 m/min ensures high productivity in all working conditions. The XE version with controlled axes enables extremely fast and precise machine setup. Flexibility: The optional equipment of the machine with a belt press allows the processing of any type of material. FLEXA 607 / 607 XE Panel height 10 (13) ÷ 60

Panel thickness 8 (13) ÷ 60 mm Rolls 0.4 ÷ 3 mm Strip edge thickness 0.4 ÷ 8 mm (12 mm optional) Feed speed 10 ÷ 18 m/min The FLEXA 507 automatic edge banding machine offers optimal solutions for all edge banding requirements. The flexible configuration options, the option to equip the machine with controlled axes in the XE version and the high feed speed make the Flexa 507 an extremely versatile modern machine. The extremely robust design and precise assemblies ensure the highest precision and

The model M3 differs from the offered multi-blade and surround circuits by its solid and compact design, as well as by the simplicity in operation. Each individual machine element is able to withstand high workloads without risks while constantly utilizing the respective full engine power. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 390 Feed speed m/min 6-48 Engine power PS 35 25,5 KW CONNECTED LOAD 58 AMPER The highest application security available on the market is achieved by SCM's exclusive system. The backfall protection of the workpiece and the protection against splinters during processing ensure maximum safety. Transport chain width mm 300 saw blade diameter mm 350 Min. cutting length mm 250 Feed speed infinitely variable rpm 6-48 Engine power kW (HP) 18,5 (25)

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Key data: 520 , 9

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

SCM steep conveyors for transporting the glazing beads after the outlet of the SCM window system. The stone conveyor is 2.60 m. high with a 6 m. conveyor belt to transport a miter glazing bead saw The size is: 2.20 wide x 2.60 high with 1.20 feet made in stainless steel. Motor 7.5KW due to start-up The conveyor belt is 6.50 m. long x 100 mm wide in the channel.

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

SCM Tenomac Spigot & Slotting Machine Motor 7.5 KW 380V Spindle 50 mm Length 320 mm Tool diameter maxi: 350 mm Mini: 250 mm Stroke 265 mm Speed: 3250 rpm Slot table feed : 3 and 12 m. Cross-cut saw unit : 2800 rpm. Saw blade diameter 400 mm Motor 3 KW 220 V Good condition - ready to ship

Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fit ...

Code: 0441 Brand: CASADEI Model: SYNCRO Four side straightening planer with 4 spindles for wood, window frames, furniture, garden furniture, sawmill and various Technical data: One-piece steel base Min/max working width mm 20/180 Min/max working height mm 6/105 Infeed table length mm 2000 Infeed table and fence adjustment mm 10 Spindles diameter mm 35 Feeding speed 6/12 mt/min Rebating cutterhead diameter mm 120 Powered feeding siystem raise Composition: 1° Spindle surface planer - Motor Hp 10 - Size mm 190 x 100 Z3 2° Spindle right spindle moulder - Motor Hp 7,5 - Size mm 120 x 100 Z3 3° Spindle left spindle moulder - Size mm 120 x 100 Z3 4° Spindle thickness planer - Motor Hp 10 - Size mm 190 x 100 Z3 Diameter of suction ports mm 120 N° 4 Planer heads Overall dimensions mm 3000 x 1160 x 1555 h Weight kg 900

THICKNESS PLANER type CASADEI R 510 second hand machine volt. 380/50 max working width mm. 510 max. working height mm. 250 min. working height mm. 3 maximum removal thickness 10 mm shaft diameter mm. 120 knives n.4 motor power Hp 5,5 weight kgs. 900

Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible.

Automatic spindle moulder CASADEI mod. MATRIX 5 (4+UNIVERSAL) - CE rules - Year 2005 - Composition: Horizontal bottom Vertical right Vertical left Horizontal top Universal - Total installed power Kw 31,9

Code: 0300 Brand: CASADEI INDUSTRIA Model: V320 - CE Standard Automatic edge bander for pre-glued edges, for carpentry, furniture, custom-made furnishings, doors, panels and various items - CE Standard Features: Automatic upper feeder with toothed belt, speed 5 mt/min, height adjustable by means of handwheel with numerical position indicator Infeed guide Pneumatic coil cutting shear Automatic front and rear pneumatic end trimmer Upper/lower end trimmers at 11000 rpm with cutters Z4 Work surface 1800 mm with 7 adjustable rollers and polyzene slide guides Extendable front support for large panels Technical data: Min/max panel thickness 10-45 mm Edge thickness in coil 0,4-2 mm Min panel length 220 mm Min panel width 110 mm Gluing unit: Blower power LEISTER W 3400 - Temperature adjustment Total installed power 2 kW Suction port diameter 120 mm Overall dimensions m ...

This CASADEI Bordatrice E350PM was manufactured in 2022. It features a panel height range of 10-45 mm and supports edge band thickness from 0.4 to 2 mm. The machine operates at a feed belt speed of 7 m/min, with a glue pot heating power of 1490 W. Consider the opportunity to buy this CASADEI Bordatrice E350PM edgebander. Contact us for more information.

Table dimensions: 1100 x 750 mm Motor output: 5 kW Spindle diameter: 30 mm reus: 2900/4400/6000/8000 U/min Weight: 500 kg Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.