car washing used for sale

Manufacturer: Menzel Type of Machine: Washing Line Year of Manufacture: 2013 Technical Data Fabric Type: Warp knit, lace, Raschel goods, tricot Material Composition: - 100% Polyamide - 100% Polyester - Polyamide/Spandex (Elastane up to 30%) Dimensions & Weight: - Material Width: 2,200 – 3,200 mm - Roller Width: 3,400 mm - Fabric Weight: 50 – 265 g/m² Performance: - Production Speed: up to 40 m/min - Process: Spun oil removing, water-based washing Chemicals Used: - Oil-emulsifier - Washing/wetting agent - Alkali - Acetic acid for pH neutralization Steel Grades: - Lateral Frames: AISI 304 (V2A) - Parts in Contact with Media: AISI 316 (V4A) Machine Specs: - Unwinder Diameter: 1400 mm - Winder Diameter: 1800 mm Power & Utilities: - Voltage: 230/400 V, 50 Hz, 3 Phase - Steam Pressure: 4 – 6 bar - Compressed Air (Oil-Free): 6 – 7 bar - Water Pressure: 2 –  ...

Manufacturer: Walter Metz Type of Machine : Container Washing System Condition : New Compatible with pallets and large four-wheel containers (660L & 1100L) Find more here - / Contact us at -

Output Capacity: 3000 kg/h // Material : PET

PLASTIC WASHING. LINE for GRAVIMETRICAL SEPARATION, including:, collection hopper, auger, STAINLESS STEEL GRAVIMETRICAL SEPARATION TANK, size mm.5.800 x 1.600 ca, n.4 moving rolls, sinking screw, drained screw for collection of floating material, n.2 additional sinking screws, lifting screw for sunk material, n.2 TECNOFER CENTRIFUGAL DRYERS in sequence, 18,5 kw, 720 x 1.500 mm, connection screws, collection hopper, sucking unit, The line is offered as is, where is, Vertical mixer available separately, conditions: mounted, immediately available, capacity: ca.500-1.000 kg/h depending on material and contamination

TBVE (TVE-ESCALE) ESCALE – Three Bath Open Width Washer Model: High Efficiency Washing Range (Washing Range – ESCALE) Manufacturer: TVE-ESCALE (TBVE Group) Year of manufacture: 2023 Condition: Good, fully operational Configuration: 3-bath open width washer with 3 evacuation (vacuum) slots – one per scour bath Documentation: Manual available Status: Available for sale Three heated wash bays, counter flow, working width of 2800mm fabric specs of 100gsm – 400 gsm (can be used on heavier cloth successfully) all plc controlled with three evac slots (one on each wash bay) input from roll or plated, output plated. --------------------------------------------------------------- Machine Description The TVE-ESCALE High Efficiency Washing Range is an industrial open-width textile washer designed for high-quality washing, scouring, and bleaching of fabrics. The system combines bath ...

Designed for washing smoking sticks for hanging meat and sausages with length to 1000 mm. Machine dimensions(LxBxH): 1400 x 900 x 1460 mm Water connection: ¾ ”; 4-6bar, 50...60°C; Electrical connection: 400 V/ 50 Hz Installed power, kW 1,65 Capacity pcs./h 600

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine, We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use., Refurbishment Details:, - Completely overhauled by professionals, - Fitted with a brand-new original pump, - All parts inspected, cleaned, and tested, - Machine runs smoothly and efficiently, Features:, - Efficient vegetable and salad washing system, - Gentle product handling through whirl washing principle, - Made of high-quality stainless steel, - Ideal for food processing companies, - Location: Emmeloord, Available Immediately, Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump!, For more information, photos, or to schedule a viewing, please contact us.

General SKU322S570 LocationBarneveld MakeQVF Glastechnik GmbH (D) TypeWashing, dissolving, filtering, precipitating and recovering installation Pressure Working pressure0.3 Bar Vacuum possiblecheck Main Features MaterialGlass Motor0.37 KW Specified Features - Glass-lined Reactor Capacity120 ltr (4x), 110 ltr. (1x) Vessel sizesdia. 595x480m (4x), dia. 400x750mm (1x) Max. temperature20 degr. C With propellor stirrer0,37 kW 230/400 Volt 175-775 rpm With paddle stirrercheck Motor0,25 kW 230/400 Volt Speed mixing shaft110-630 rpm With jacketcheck Glass Reactors MaterialGlass General No.155153/2214 Year of construction1995 Mounted on legsframe With switchgearas is Floorspace4,6x2,0 M Total height2,3 M Weight1800 Kg Extra SpecificationsQVF Glasstechnik Washing, dissolving, filtering, precipitating, and recovering installationThe entire installation is built in a t ...

Automatic washing machine for Vemag trollies with wash and rinse section, soap dosing and automatic tote bin turner (in and out)., Capacity: 40 trolleys per hour, Heating: direct steam, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 14.5kW, Dimensions: 11800 x 1900 x 2650 mm

The Tetra Pak Tetra Cardboard Packer 70 (TCP 70) is an automatic secondary packaging machine designed for grouping and packing filled Tetra Pak carton packages into wrap-around cardboard or corrugated board cases. It is widely used in dairy and beverage packaging lines operating in ambient conditions. It is flexible and has a number of possibilities when it comes to package sizes, packing patterns and cardboard units. This machine is previously used for 1 Liter Slim / Base cartons, 4x2, in a tray (not wraparound). Output: up to 7.000 cartons/hour (depending on format and configuration). Feeding side: Left hand. Infeed type: Multi. Infeed: U-form. Conveyor speed in: 35 m/min. Conveyor width: B79/B65. Hotmelt unit (Robatech KPC12, serialnr 134590, year 2005)., Type of Machine: Cardboard Packer, Capacity: up to 7.000 cartons per hour, Type of carton: 1.000 ml Slim / Base, Development step:  ...

Model CAR-T5 is a reliable, totally mechanical cartoning machine for different types of products and very versatile. The robust construction of the whole system allows the production with almost all types of cardboard. The machine comes with the automatic bottle feeding system. The size change is simple and fast, adjustable with the handle and easy to maintain. The cartoning machine is built with state-of-the-art technology and is very robust. The application area of the cartoning machine is almost unlimited. This model is used worldwide in the pharmaceutical, cosmetic, chemical and food sectors. Technical data: Production: 120 cartons/min handling: intermitent carton measurements (A x B x H): Min. 20 x 16 (12) x 60 mm max. 95 (105) x 70 (80) x 200 (205) mm Electrical consumption: 4 kW Power: 9.5 kVA Compressed air: 9.5 m³/h 6 bar.

- agregat card ARB 425 - analog output card ARB ARB 390 - output card ARB 409 - base board card SN. 193170 + SN 143537 ARB 729 + SN 173858 - panel card ARB 256, ARB 414 - control card ARB 692 - CPU card ARB 726, ARB 251 - diagnose card ARB 389 - disk controller card ARB 500 - input card ARB 254, ARB 705 - injection control card ARB 460, ARB 328, - elektronic card ARB 252, ARB 255, ARB 380 - inside press card ARB 259 - base board card ARB 372, ARB 523 - motor control card ARB 307, ARB 440 - 24V card ARB 381 - proporcional valve card 0 811 405 047, ARB 330 - memo card ARB 339, ARB 508, ARB 526 - heating control card ARB 365, ARB 404, ARB 530 ARB 640, ARB 730, yPIII - distributor card ARB 511, ARB 534, ARB 538, ARB 539 - video card ARB 258, ARB 535 - amplifier card, modul card - rectifier - transducer card ARB 302, ARB 399, ARB 733 - power supply Deutronic ED-60 -  ...

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Bosch Cartonetta 75 horizontal cartoning machine, bucket infeed, carton size range min. 15 x 15 x 54 mm (LxWxH), max. 92 x 66 x 180 mm (LxWxH), output up to 75 cartons per minute, leaflet folder from stack, reverse tuck closure of the carton flaps, Laetus Argus 6012 bar code reader for folding carton (opposite insertion side), leaflet (both sides) and presence of leaflet inside the carton, emboss coder (2 lines), electrical connection 400V/50Hz, power 4 kW, compressed air 6 bar, machine footprint approx. 2900 x 1300 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 800 kg, retrofitted in 2009 by the company HVS including new Siemens SIMATIC S7-300 machine control system + SIMATIC panel

Used cartoner Höfliger + Karg (Bosch) CARTONETTA. New 1975. Dimensions: lenght 2850 mm + ca. 3000 mm conveyor width 1100 mm height 1600 mm weight 450 kg. Voltage: 380V with a power socket Machine speed: up to 50 cartons per minute Folding the leaflet: 3 or 4 fold the sheet. Dimensions for folding leaflets: 3 - fold: from 90 x 90mm to 210 x 210mm 4 - fold: from 90 x 90mm to 297 x 210mm Carton length: 50 - 180mm Carton width: 15 - 80mm Carton height: 16 - 60mm

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.

TETRA PAK CARDBOARD PACKER MODEL TCBP70 VERSION 110 U-FORM YOM 2007 WRAP AROUND

Cariba AV30/132 vertical cartoner, intermittent motion, reverse tuck closure, machine on wheels, carton size range: min. 15 x 15 x 70 mm (AxBxC), max. 200 x 120 x 300 mm (AxBxC), output up to 50 strokes/minute, electrics 400V/50Hz, machine footprint approx. 2900 x 1600 mm (LxW), machine height approx. 1695 mm, machine net weight approx. 900 kg

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

Intermittent motion cartoner for folding boxes. Machine incl. feeder for pre-folded leaflets, inkjet printer (year: 2005). Output: max. 75 cartons/min.

Windmöller & Hölscher Triumph 5A/SM Carrier Bag Machine The Windmöller & Hölscher (W&H) Triumph 5A/SM is a high-performance paper carrier bag manufacturing machine designed for the production of square-bottom paper bags with integrated flat handles. Renowned for its reliability, durability, and precision engineering, the Triumph 5A/SM remains a popular choice for manufacturers producing retail shopping bags, grocery bags, and food-service packaging. Operating from paper reels, the machine automatically forms the bag tube, creates side gussets, folds and glues the square bottom, and applies flat paper handles inline, ensuring efficient and continuous production. The integrated photocell system allows accurate processing of pre-printed paper reels for branded packaging applications. Key Features Automatic production of square-bottom paper carrier bags with flat handles Suita ...

Cariba C300 horizontal cartoner with automatic bottle infeed, continuous motion, reverse tuck closure, GUK pre-folded leaflet inserter, carton size range: min. 15 x 15 x 55 mm (AxBxC), max. 150 x 90 x 220 mm (AxBxC), output up to 250 strokes/minute, electrics 400V/50Hz, machine net weight approx. 2000 kg

Carpentier HSA/60-2/V4 and GV-HM + 2 head folding carton erector HSA/60-2/V4 hot melt and straight seamer GV-HM hot melt + 2 stamp sets for 2 formats available: 188 x 150 mm and 195x 145 mm + meler micron 4/4-120P hot glue machines, incl. manual glue gun + Operating instructions and circuit diagrams available + Siemens S7-300 + Simatic Panel HMI + Videojet coding + Built in 2009 + Like-new condition sartorius EWK 3010 Checkweigher + Built in 2009 + Mint condition Conveyor belts, curved belts + Stainless steel link chains + Drive + Mint condition At call

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1500 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min power capacity - table: 100 kW Torque: 31784 Nm 0: 218 kw weight of the machine ca.: 55 t Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coola ...

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilli ...

• Format range folding box (5 inch) W 20-95, H 16-70, L 60-200 mm • Output max. 100 folding boxes/min, intermittent motion • Closure double-sided offset tuck-in flaps • Leaflet folding and inserting machine from magazine Bosch FM 75-3 • Code reading Leatus Argus 6012 (1x brochure) • Bad ejection • Vacuum pump • Contactor control • Connection 400V/50 Hz

Attachment with feed table for unfolded paper 4 buckle plates Drive via toothed belt (drive not included) Handwheel left Paper format max. 215 x 570 mm, min. 60 x 130 mm Bar code laser scanner Laetus Argus 6012 2 pcs. reading heads

Eismaschine Carpigiani

Offer 4x Cargo-Liner SP1/SP4 VKD suitable for the Linde tow tractor Linde P30C. Max. payload 500 kg Max. towing weight 3000 kg The cars are little used and in good condition.

Semi-automatic vertical intermittent motion cartoner in Stainless Steel with output up to 70 boxes per minute (depending on product type and number of operators) Suitable for Pharmaceutical, Cosmetics, Nutraceutical, Contract Packing, Biopharma, FMCG, Medical Devices and other industries. Excellent condition for age - originates from a prominent Pharmaceutical manufacturing in Europe, where machine was serviced on regular basis. Equipment size: L: 3300mm x W: 1600mm x H: 1,900mm Weight total: approx. 1650kg Technical info: Carton box size range: - Width: 20mm to 115mm - Depth: 15mm to 75mm - Height: 50mm to 195mm - Width + Depth (max) up to 190mm CE marked Fitted with side cassette feeder for empty boxes Pre-folded leaflet inserter (leaflet dimensions: Length: 100 to 210 mm, Width: 18-45 mm) Fully guarded with interloc ...

Elec: 380 V / 50 Hz , Pressurized air: 6 to 7 bars , Integrated vacuum pump: Yes, A (mm): 20-85, B (mm): 17-65, C (mm): 50-200, Dimensions (mm): 3700x1860 H2060, Documentation: Yes

faceplate diameter: 10000 mm swing diameter: 14000 mm turning height: 8000 mm Control: Siemens Sinumerik 840 D workpiece weight max.: 500 t faceplate turning speed range: 0,2 - 35 U/min drive motor: 300 kW ram head dimension: 600 x 600 mm max. ram stroke: 4000 mm milling drive: 100 kW hob turning speeds: 3000 U/min rapid traverse x + z axis: 10 m/min total power requirement: - kW weight of the machine ca.: 350 t Machine has never been used and is still original, seaworthy packed and stored. equipped with: - CNC control Siemens Sinumerik 840 D - Hydrostatic axes - Hydrostatic table - Milling device - Hirth couplings for tool holder Acessories: • VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164 • VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165 • HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163 • UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171 • HEAD DANDREA UT-8-800-S 8T5060166 • TOOL HO ...

Groove electrode, stick electrodes, carbon joint rods, carbon electrodes -Manufacturer: Binzel-abicor, Carbon electrode package of 50 pieces -Type: Carbonair 10 x 305 -Identification number: W 000 010 446 -Quantity: 9 packages available -Price: per package -Transport dimensions: 320/105/H55 mm -Weight: 2.1 kg/package

Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 100-600 mm (L x W x H) Taping units 2 x K11R for 50 mm wide tape Electricity 500W / 380V / 240V / 50 Hz Certificate CE compliance

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

Inline Biercarbonisierer

Carrier Turbo Cold Water Kit, 19XR5251467, Y.O.M. 2800KW cooling capacity, from 20%-100% adjustable, latest model, very efficient, very good condition, ready to use immediately.

Carriage for Agfa Avantra 44 - see picture Available: now

Carestream Direktview CR 950 with: 2x Control panel 25 cassettes: 18x24-8 pcs. 24x30-5 pcs. 35x43-12 pcs. complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before plac ...

Make: Carrier Type: QUIETIS WPH31A 400/3/50 Refrigerant: R404A Built: 2013 Price on request

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

TECHNICAL DATA: 12 Pieces

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CARRIER 30 RA 040 Brand: CARRIER Type: 30 RA 040 Stock number: M21-4526 Cooling capacity: 39.3 kW Application: Cooling Number of fans: 1 Refrigerant: R407C Refrigerant Content: 10 kg Voltage: 400 Volts Power consumption: 30 A Dimensions: 2100 x 1100 x 1400 mm Weight: 526 kg Year: 1999 Number in stock: 1 piece(s) Price: Quote request Description: Nice air-cooled Carrier chiller with 1 scroll compressor on 1 circuit. This machine is equipped with coated fins, a Pro Dialog Plus controller and a hydromodule (water pump and expansion vessel). Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Please visit also our website: used-refrigeration

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...