cam automatic used for sale

- Total installed power 29.60 KW. - Part width from 205 mm to 3200 mm. - Piece length from 100 mm to 1200 mm. - Part thickness from 10 mm to 70 mm. - Belt feed, feed speed 52 m/min. - 2 loading arms with belt feed of approx. 670 mm length. - 2 unloading arms with belt feed of approx. 315mm length. - Distance between drill bits: 32 mm. - Drill bit rotation speed 4000 rpm. - 1 x horizontal drilling group working from the right side with 20 drill bits. - 1 x horizontal drilling group working from the left side with 20 drill bits. - 2.20 KW-2700 rpm motor in each horizontal group. - 5 x vertical drilling groups working from below, 2 rotating heads 0°-90° in each group, 10 drill bits each head, 1.32 KW-2700 rpm motor in each head. - 2 x vertical drilling groups working from above, 2 heads each group, 10 drill bits each head, 1.32 KW-2700 rpm motor on each head. - Minimum drill ...

very stable automatic with protective lock and max. 275 saw blade

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

Key data: 530 mm

Automatic machine with mitre Cutting Area 90° round 530 mm 90° flat 530 x 800 mm 45° flat 530 x520 mm 30° flat 530 x 320 mm Cutting angle 45°-0°-60° Saw motor 3.0 kW Belt speed 20 - 120 m/min, infinitely variable Equipment: - 99 Programs - Machine stand with chip loading tray - Hydraulic cutting pressure regulation - Stepless speed adjustment - Hydraulic guide arm adjustment - Minimum quantity lubrication - Shutdown at the end of the cut and retraction behind Movable jaw - Chip brush running along - Hydraulic mitre adjustment - Hydraulic vise clamping - Hydraulic saw blade clamping - Instruction manual

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

mobile sword folding unit

Auction-ID: A3-43367-21293

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.

Table size width: 1850 mm Table size length: 1200 mm Features rotating head with dimensions 1000x1000 mm, electronic control box, connected to compressor (not included), 3 grippers including 1 material transport gripper. Customizable machine. Has had annual maintenance. Viewing day by appointment, sign up at: l.vandenhoven@troostwijkauctions.com

saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X stroke: 6500 mm Y stroke: ~1000 mm Z stroke: ~600 mm Power: 25 kW Power supply: 400 V / 50 Hz Automatic tool magazine Spindle speed: up to 18,000 rpm Machine for processing aluminium profiles

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

Description Domino M230i T4 The ability to use stroke lengths of 0 – 360 mm and the auto-stop function to interrupt movement when touching an obstacle make the M230i-T4 label dispenser the most versatile and safe labeling system available on the market today. It is immediately available and ready for use Viewing possible at any time If it does not fit, there is always a large number of different labelers in stock. Talk to us and we will find the right one for you.

number of spindles:8

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

Anko BFK-10 Automatic stir fryer Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:8,6 t spindle drive motor:11 kW

saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m

REF-2263 SOMME 323 CAN SEAMER WITH 5 HEADS AND VACUUM FILLING SYSTEM 20 VALVES Automatic tin can seaming machine with 5 seaming heads. Fitted with a 20-valve vacuum filling unit. Manufacturer: SOMME Model: 323 Can size: Ø 73mm (easy-open lids) Overall dimensions: length 3,400mm, width 2,800mm, height 2,200mm

Construction: Entirely constructed of stainless steel Press is used for tenderizing red and white meats without weight loss. All juices are retained inside the meat even after processing. The machine is fast and efficient, with a productivity of 500 steaks per hour. The thickness of the processed meat can be infinitely adjusted in the range from 1 to 30 mm. Technical data: Motor 1.5 kW Height 850 mm Width 440 mM Length 800 mm

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015

REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm

REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

Selectomat System Schlatter RMB EMBA 18

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Automatic Angle Grinder 130 mm Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Holeplate diameter: 130 mm 400 V, 3 Ph, 50 Hz Hopper capacity approx. 130 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 110,0 (120,0) Height: 135,0 (185,0) Installed power: 18,0 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating  ...

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: The transport rollers must be replaced.

Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

spindle passage: 12 mm Control: Fanuc type: LB 2 bar loader: FMB total power requirement: kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)

Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

BÖHL JUNIOR S-450 VA Verpackungsvollautomat für alle Arten von Langgut Produktabmessungen • Breite 80 – 220 mm • Höhe 50 – 100 mm • Länge ca. 2.000 mm bis 6.000 mm • Gewicht ca. 30 KG • Maximale Querschnittdiagonale 311 mm Packmaterial • PE-Stretchfoliendicke ca. 7 – 50 my (empfohlen 23 my) • Rollendurchmesser 220 mm • Rollenbreite 250 mm • Hülsendurchmesser 76 mm Leistungsbeschreibung • Wickelring D = 450 mm Innendurchmesser • Geschwindigkeit max. 20 m/min. (frequenzgeregelt) • SPS-Steuerung Siemens S7-200 mit Touchpanel • Steuerspannung 24 V DC • Anschlussspannung 3 x 400 V – 50 Hz • Leistungsaufnahme ca. 2 KW • Sicherung 25 A • Geräuschpegel 79 db • Betriebsdruck 6 bar • Luftverbrauch ca. 20 Normliter pro Zyklus Technologie • Automatisches Glattschnitt-Schneidwerk für das Verpackungsmaterial • Ve ...

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available