cam automatic used for sale

Block hoist before debarking, rotor passage 75 cm, lifting and lowering device, hydraulic equipment 7.5 KW, 2.2 KW Tilting tray after debarking, steel substructure made of HEB 200 and HEB160, Control cabinet with control panel

Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm -Weight: 327 kg

• Vertical cartoner, intermittend, semi-automatic • Formate area folding box depth 15 - 70, width 20 - 115, height 50 - 190 mm, box remove by sucker • Output max. 15-70 boxes/min, the maximum speed depends on the format and product • Embossing device • Vacuum pump • Complete housing with segment doors • Mobile with removable chassis • Electric cabinet mobile • PLC Telemecanique TSX 17 • Electr. connection 400V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Campagnolo Packaging Systems Vertical form and seal machine Model: C25 Serial:A02-02

Horizontal cartoner with continuous movements with leaflet folder GUK , bar code reader Leatus and coding unit . Product for which it is equipped: PVC trays with ampoules Material of machinable cases: Compact carton with a weight of 220 +/- 400 gr / m2. Cords and pre-attached cases. Clousere: Tuck Automatic trays feeder . Electrical Trifase altering 220 or 380 V 50Hz Motor power 3 Kw Motor power vacuum pump 1.25 Kw Power transformer and service circuits 0.95 Kw Total power 5.20 Kw Air consumption Absorbed 17NL per minute at a pressure of 6 bar Mechanical speed : max 260 per minute Format range A 20 - 160 mm B 12 x 70 mm C 70 x 230 mm

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

Stream current meter, 2.0 EM-FIX-800-S0, Camfil / Handte, new -60% Current new price € 3600 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Flow monitor with manually adjustable throttle valve for adjusting the extraction volume. Limit value monitoring and signal when the required extraction air capacity is exceeded or not reached. - Air volume 600-800m³/h - Connecting flange DN 125 on both sides - length 650mm By measuring the volume flow and optimising the setting, high savings in maintenance ...

Maximum diameter 660 mm scortecciabile

Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a  ...

I/01 MODUL CAMBUS RS - 12404581

I/01 MODUL CAMBUS RS - 12404584

Description

de-de-de-grinding machine Cambio 66 with mechanization Diameter 660mm with centering table, block pull with drop. dismantled

max width: 1000 mm

CAM CARTONING MACHINE, MODEL AV Year of construction: 2010 Semi-automatic vertical intermittent motion cartoner. For pharmaceutical, cosmetics, nutraceutical, contract packing, FMCG, medical devices and other industries. In stainless steel. Machine in excellent conditions, with manuals. Pre-folded leaflet inserter • Fitted with side cassette feeder for empty boxes • Fully guarded with interlocking • CE marked Output: up to 70 boxes per minute (depending on product and number of operators) Carton box size range • Width: 20 mm to 115 mm; Depth: 15 mm to 75 mm; Height: 50 mm to 195 mm; Width + Depth: up to 190 mm (max) Leaflet dimensions • Length: 100 to 210 mm; Width: 18 to 45 mm ENERGY CONSUMPTION • Power absorption: 1,2 kW • Air consumption: 16.9 Nl/1’ • Air pressure: 5÷6 Bar DIMENSIONS • Size: 3300 mm x 1600 mm x 1900 mm • Weight tota ...

for any more information please get in touch 2x Units available This machinery originates from a prominent pharmaceutical manufacturing plant in Central Europe. Working Description: Semi-automatic vertical intermittent motion cartoner in Stainless Steel with output up to 70 boxes per minute (depending on product type and number of operators) Suitable for Pharmaceutical, Cosmetics, Nutraceutical, Contract Packing, Biopharma, FMCG, Medical Devices and other industries. Excellent condition for age - originates from a prominent Pharmaceutical manufacturing in Europe, where machine was serviced on regular basis. Technical info: Carton box size range: - Width: 20mm to 115mm - Depth: 15mm to 75mm - Height: 50mm to 195mm - Width + Depth (max) up to 190mm CE marked Fitted with side cassette ...

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, solar cables, inverters, data processing devices, microloggers -Campbell: Scientific SDM-CAN Datalogger -Dimensions: 235/110/H20 mm -Weight: 0.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 25 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 75/64/H72 mm -Weight: 0.7 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 61M2PO40A0250 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 515/60/H60 mm -Total weight: 2.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 150 mm -Piston diameter: 50 mm -Piston rod: 18 mm -Price: per piece -Number: 10 pieces -Dimensions: 330/65/H65 mm -Weight: 2.15 kg/piece

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 2840 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 215/175/H150 mm -Weight: 4.2 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Camozzi, pneumatic cylinder type 25N2A25A660 unused Ovp -Stroke: 660 mm -Piston: Ø 25mm -Piston rod: Ø 10 mm -Number: 2x cylinders available -Price per piece -Dimensions: Ø 27 x 800 mm -Weight: 1.0 kg/piece

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 315 mm -Adapter: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Bolt circle: Ø 135 mm -Dimensions: Ø 350 x 90 mm -Weight: 19 kg

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Refer to code 1024 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Used carton wrapper by CAM in 2014 model G35 Machine in very good condition. Full technical documentation available and detail description below. Year of manufacturing 2014. Technical data and packaging length: mm. 2635 width: mm. 1595 height: mm. 1635+90-10 net weight: 1350 kg gross weight: Kg 2000 minimum speed: 6/1' cycles Maximum speed: 35/1 cycles Film Roll Autonomy: 8-10 hours volume:

SPECIFICATIONS: Machinable length: max. 600 mm Pneumatic adjustment 01 Sawing unit 02 milling motors (1.5 kW) With loader.

SPECIFICATIONS: Installed power: 5.5 kW 2 flywheels Ø 450 mm Sanding belt length: 4900 mm 2 speed settings

Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller

SPECIFICATIONS: Max. cutter diameter mm: 55 Voltage: 380 V

SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping

SPECIFICATIONS: Power horizontal milling motor: 3 kW Variable speed drive: 0.37 kW Equipment: 01 Automatic loader

SPECIFICATIONS: Installed power (hydraulic pump): 4 Kw Double pump GR2+GR2 14 cm³+14 cm³ Dimensions: 3500 x 1300 x 2200 mm Output per hour: 100 chairs/h Safety precautions

Machine for the production of backrests of chairs.

SPECIFICATIONS: Double frame press for chair production Hydraulic operation Dimensions: 3500 x 1300 x 2200 mm Protective devices Production: 100 chairs/h

CAM RV-P high speed overwrapping machine with plate sealing for cartons, folding boxes, etc. in heatsealable foil (PP, PVC, Polyethylene, laminated papers, wax papers, etc.), carton size range min. 40 x 15 x 60 mm (AxBxC), max. 110 x 50 x 220 mm (AxBxC), foil width from 90 to 335 mm, capacity up to 150 strokes per minute, machine floor space approx. 3505 x 2085 mm (LxW), machine height approx. 1670 mm, machine net weight approx. 1750 kg

Cutter Roland CAMM-1 Pro Art.Nr. PS5947 FB 500 euro + 19%

Cross sander for Comec chair components 5.5kw main motor Sanding belt width 100mm Extraction nozzle 110mm Dimensions of the machine 233x60x140cm

SECOND-HAND COPYING CAROUSEL CAMAM GC6/4F-4L - 2+2 milling units (roughing and finishing) - 2+2 sanding units (roughing and finishing) - pneumatic locking cylinders - n.6 working stations - with cabin - Control panel - volt. 380/50 - sn 73 - CE rules (year 1997)

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

1x champagne cork orienter Cames / Kematec, used, type: P UNO E 94, built in 1994, capacity max. 5,000 corks/h, the machine ran flawlessly until the end, dimensions: D: 2.20 m, W: 1.35 m, H: 2.40 m, NP 17 ́ +, technical data see mail Kematec 22.11.19 Price: €6,900 plus VAT from stock Dolgesheim more offers..: vino-tec

CAMAM MO-4A double-sided oscillating drill Number of spindles per page 3 Tool mounting bracket basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material clamps per side

Mobile detriment machine Cambio 85 engine iveco 420hp 10 cylinder complete in operation a lot of spare parts diameter 850mm 5 knives

Manufacturer: VHF Model: CAM2030 Condition: used Find more here - / Contact us at -

2012 BG-CAM Pro 2030 ATC Machine name: BG-CAM Pro 2030 ATC Procurement date: June 6, 2012 Machine type: portal milling machine - flat bed Control: Fagor 8055 Processing area: X approx. 3000mm | Y approx. 2000mm | Z approx. 300mm Machine table: 6-zone vacuum high-pressure table Spindle: HSD spindle | HSK 63 F | Max. speed: 24,000 rpm Electrical connection: see picture in the appendix. In 2021, various things were renewed. Such as, for example, Y-axis guide shoes, Y-axis bearing group, Y-axis driver bearing including gear and the Y-axis toothed belt. Measurement of the milling machine using a laser interferometer including storage of correction tables. The spindle was repaired at the end of 2018, has been around for a few years now and it shows. A repair is recommended there. Find more here - / Contact us at -

I/01 MODUL CAMBUS RS - 12404582

I/01 MODUL CAMBUS RS - 12404583