burner used for sale

- Platform scale for the weight of raw coffee; - Pneumatic loader for raw coffee, with collection tank for 60 kg green coffee; - Vittoria semi-automatic roaster; roasting capacity per cycle: 60 kg. Cycle duration between 15/17 minutes. Electric panel, toasting cycle control with automatic unloading. Probes for temperature detection and the possibility to set and adjust the roasting curves; - Opening toaster by compressed air control as well as emergency opening always controlled automatically for operator safety; - Roasting drum internally connected to a water outlet, for fire safety, which can be operated automatically or manually; - Methane burner; - Film maker with continuous film expulsion system; - Baltur smoke burner; - Cooling tank with safety grid protection and suction circuit; - Electro-pneumatic stone remover with silos, complete with suction fan; - Stone removal sil ...

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

- Weishaupt monobloc two-gas burner - Burner type: WM-G50/1-A - Suitable for the combustion of natural gas and biogas - Year of construction: 2016 - Power: 800 - 8000 KW

Deck Oven Wachtel Columbus C520/120M Deck oven with 5 decks one above the other. Front in stainless steel, side panels and rear panel in stainless steel. All decks with interior lighting and cooker doors made of stainless steel. Natural stone hobs. Burner arrangement at the front below the decks. Year of construction: 2017 Deck dimensions: width 1200mm, depth 2000mm, height 165mm, Height of top deck 205 mm Baking area: 12.0 sqm External dimensions: width 1620mm, depth 2780mm, height 2345mm Heat output oil firing: 8.6 kg/h Elco oil burner for Columbus C520/120M Furnace control including energy management IQ Touch computer control Computer control with touch screen and smartphone character with tempered glass user interface and high-resolution 9 inch color screen

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

Ventilation system York for heating and cooling. Heating 64 KW with gas burner. Cool 33 KW with 2 cooling compressors. 8,500m3/h air mend. The devices are new, never run, even folded. Request on 0043-6641838175 or info@frigocom.at

Drying plant aluminum for corn and grain, Direct air heater 1200 KW, Weishaupt burner L5, 1 fans 30 KW, wet elevator galvanized, control cabinet. Mob. + 491715213204

generally refurbished and modified; for roasting batches between 10 and 25 kg of green coffee; roasting time between 10 and 22 min.; heating with natural gas or propane including cooling filter, roasting cyclone with fan, new burner and new manual control with digital temperature display paint according to customer requirements extension with raw coffee supply and flue gas cleaning according to customer request

generally refurbished; for roasting batches between 8 and 15 kg of green coffee and roasting time between 10 and 20 min.; heating according to customer requirements with natural gas or propane including cooling tray, new roasting cyclone, new burner and manual control with three digital temperature dislays paint according to customer requirements extension with raw coffee supply and flue gas cleaning according to customer request

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...

With 2 machine burner hose packs (15m) 1 x Percut 101.-2 1 x quick-release head naehere information on request; ready for use

New 161 i with automatic gas console year construction year 2015 installation and commissioning on request data see PDF HiFocus 160i 400V ArH2N2/O2 up to 15m with plasma torch connection unit Oxygen; Nitrogen; Argon; Hydrogen; Air oxygen; Nitrogen; Forming gas 5; Air plasma machine burner PerCut 170-2 with vortex gas ; immediately available

Messer Griesheim Corta P 4000 4 car burner burning table: 4000mm x 3000mm free loading; ready for immediate use

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014

Make : Lutro Built: 1991 Dimensions: 5.0 m x 12.1 m x 4.8 m (LW approx. WxLxH) Supply ceiling : Filter ceiling all-surface Lamps on top: 2 x 7 pcs recessed luminaires with 4 x 58 W each Lamps on the side: 2 x 3 pcs recessed luminaires with 4 x 58 W each Drive-in side: 5-leaf gate 4.7 m x 4.5 m (approx. WxH) Escape door: 0.65 m x 1.95 m (approx. WxH) Exit side: 5-leaf gate 4.7 m x 4.5 m (approx. WxH) Escape door: 0.65 m x 1.95 m (approx. WxH) Rusting: 2 x 12 pcs. 600 x 840 mm, support rod 600x60x4 mm Heating : Oil burner, 523 kW Supply unit: 45,000 m3/h; 2 x 7.5 kW motor Exhaust unit: 45,000 m3/h; 2 x 7.5 kW motor Dry temperature: 80 degrees C Piping : supply and exhaust pipes, deflector hood, air intake bow Electrics : Control cabinet Location : Room Lörrach Sales price: € 29,990,- net, from location without dismantling This plant is already sold. We will p ...

CNC plasma cutting system Esab Pegasus Working area: 4x2m Esab Precision Plasma 100A, with PT24 burner automatic gas mixing console (+1 complete, new gas mixing console as replacement), complete documentation; in good condition, without suction many new and original slip parts (Duesen; electrodes), as well as other spare parts. assembly and commissioning on request; ready for immediate use

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

SATO FB 3000 Control CNC 801 Power sources 2 x Thermadyne Merlin 6000 a150A Cutting data see PDF Year construction: 1999 cable design for 12m travel distances 12000 x 3000mm Water table: 8000 x 2000mm Many wear parts available, 1 spare burner. ; ready for use

We offer you here a rotary rack oven. Producer: MIWE Type: Roll 60/80 Computer control CS For sheets 580/780 mm Oil or gas burner If you are interested and for more information we are available.

Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use

Make : Wolf Built: 1988 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.0 m (approx. WxH) Roller door: 6.0 x 2.3 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting, support rod 1200x40x3 mm Lifting platform : was defective, was scrapped Heating unit: 209 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust unit: 22,000 m3/h; 7.5 kW Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Nuremberg area Sales price: € 11,990,- net from location incl. dismantling We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, light ...

Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use

Liescotherm heating system TG 04 No. 225724 and 225728 devices 58 KW Burner by Dr.B. Thyssen GmbH Type: IG50RN Manufacturer no. 6026 / 76 and 3136/77 L device adapted for natural gas H, operational group Year of construction: 1977 Decommissioning: 2005 Functionality is not known, the devices are offered as a spare part supplier. Can the proper dismantling and pick-up at the location The iron bridge 16, 65795 Hattersheim be made. We are happy to answer questions phone 06190-93449-0 There are 2 pieces, the plants can be visited by appointment. Price VB, make an offer. -> Note Please also our other ads < -. We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us! (SoPo 410)

CNC Portal Cutting Machine Manufacturer: ESAB Type: SXE P1 3500 LH Year construction: 2001 CNC control: Vision 51 Working area: 2x6 m Track: 8 m 2 x car use burner under power to visiton request dismantling and commissioning on request; available from 37 KW 2016

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

LUTRO painting booth diagonal ventilation on the side: Make : LUTRO Built: 1996 Dimensions: 4.0 m x 6.5 m x 3.5 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 3 pcs recessed luminaires with 4 x 58 W each Entrance gate: 2.4 x 3.5 m (approx. WxH) Escape door: 0.6 m x 3.5 m (approx. WxH) Heating unit: 200 kW with Abig gas burner Dry temperature: 80 degrees C Supply air unit: 12,300 m3/h; 5.5 kW Exhaust unit: 12,000 m3/h; 5.5 kW Suction register: 2 pieces on the side, 2.6 x 1.1 m (approx. WxH) Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location: Friedrichshafen area Sell price: € 9,990,-, net from location without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, ...

Painting booth for switching to dryer operation: Make : LUTRO Type : KSP7-BT Built: 1993 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps : LED, 2 x 4 pcs recessed luminaires with 3 x each ? W Entrance side: 2-leaf gate 2.3 m x 2.8 m (approx. WxH) Escape door: 0.6 m x 2.3 m (approx. WxH) Rusting: 5,620 x 1,910 mm (approx. WxD), 22 pieces 950x510 mm Heating unit: 242 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust unit: 22,000 m3/h Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Schwaz, Austria Sales price: € 9,990,- net, from location, without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, grating ...

Used deck baking oven MIWE, type: Ideal R - In the bakery State baking surface: 18 m² Number of cookers: 5 units Hearth size: 1,800 x 2,000 mm -With gas burners -Oil burner according to customer requirements - computer control - hood with fan - completely assembled the furnace is located in the State of the bakery and is immediately ready for use. Delivery and installation available on request. We like to overtake even the oven for you. Request

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Make : LUTRO Type : Special plant BU EI S Built: 1990 Dimensions: 4.8 m x 7.0 m x 3.9 m (approx. WxLxH), total height 5.5 m Supply air ceiling : Filter ceiling Lamps: 2x4 pcs. Recessed luminaires, 4x58 W + 2x3 wall recessed luminaires on the side Entrance side : Roller door 4.0 m x 3.9 m (approx. WxH) Exit side : Roller door 4.0 m x 3.9 m (approx. BxH) Escape door: 2 pieces, 0.6 m x 2.1 m (approx. WxH) Grating : Full-surface grating, 80 pcs. 690x560 mm, support rod 560x50x3 mm Heating unit: 291 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust air unit: 22,000 m3/h Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Stuttgart area Sell price: € 14,500,- net from location, without disassembly

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Used deck oven for the bakery store MIWE, Type: ID 5.0616 - 11.1 2kr - each baking chamber 1m² baking space (total 5m²) - maintenancing every 3 month - burner: gas - condition: very good Location: North Germany The oven is in a very good condition and ready for operation. Inspection and test run are possible at any time. The original price in 2005 was EUR 40.000,-

Machine type MIG/MAG welding system Make Merkle Type RedMIG 1600 K Connection voltage 1 x 230 volts Setting range 25 - 160 amperes Switch-on time 30% ED at 160 amperes 60% ED at 130 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roll drive Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 620 mm Weight 65 kg Age 12 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire, D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece glass 90 x 110 mm white 1 piece protective glass 90 x ...

Type Gemini 4000 Bj.11/2007 8000mm Laengslaufbahn 2 x Autogen burner 1 x Plasmasupport Preparation Working area 3500mmx6000mm without filter system, without burning table. commissioning on request ; ready for immediate use

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...

Knife Cortina 2600. Year built:1994 Control KS 20A Plasma: Hypertherm Max 100 (cutting up to 30mm) The suction table: 1500mm x 3000mm. With only one burner car instead of 2 or 3, you have a working width of up to 2000mm. The box program on the PC is the OmniWin CAD. Extraction system: Donaldson 5.5 KW to be visited under electricity commissioning on request

Used low-pressure flame pipe boiler from LOOS from Gunzenhausen in good condition. The plant was in operation until the demo days and was shut down due to general plant changeover. Manufacturer LOOS Gunzenhausen Type: UN-D 2600 53.0 m2 x 1 bar Built in 1999 Ab. Steam generation 3200 kg / h Ab. Pressure 1 bar Water content 2560 l Brenner Weisshaupt Type L7T Heating oil burner Power 320 - 1957 kW Used last TÜV exam 2018 Dimensions: 4000 x 1900 x 2400 mm Also visit our website. We have a wide range of products in stock for the industry. A visit is worthwhile. The information about our company and the link to our website can be found in the dealer list under Brand GmbH.

Gemini type 4000 BJ. 11/2007 8000mm longitudinal career 2 x oxy-fuel burner 1 x plasma support preparation Workspace 3500mmx6000mm without filter system without firing tables. Commissioning on request

Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 280 K Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 40% ED at 280 amperes 60% ED at 230 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 870 x 480 x 740 mm Weight 105 kg Special accessories Display and wire automatic Age 6 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield  ...

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...