burner used for sale

90KW AND 120KW CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)

Burners for Miwe stoves Please take data from the nameplate. Burner removed immediately after the furnace was switched off Burners cleaned and technically checked no guarantee and warranty

Further information on request

dreizler® dual-fuel burner in DUObloc version Operation infinitely variable modulating (gas and oil) CE certified and compliant with EN 676 gas burner with blower and EN 267 oil burner and the EU directives EU/2016/426 Gas Appliance Regulation and 2006/42/EC Machinery Directive Dual-fuel burner according to EN 676: • DUObloc version: fan separately on base frame with vibration damper, electric motor and fan wheel in sheet steel housing, with protective grille and compensator on the discharge port • Burner housing with gas/oil/air mixing device for the combustion of natural gas and liquefied petroleum gas and EL fuel oil, other liquid or gaseous fuels on request • Two-pole ignition transformer device for direct ignition of gas and oil flame • Flame monitoring via optical flame detector • Gas deficiency protection and air deficiency protection on the burner � ...

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610

Brennerhals BINZEL, ABICOR WH241 ROBO WH241 M6 45 DEG. BENT 962.0302 New ! Dimensions: 270 x 70 x 50 mm

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176

Manufacturer: Weishaupt Type: WM-G20/3-A Number of pieces: 2 pcs. Year of construction 2019 Power: 2000 kW Location: Wuppertal

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 972 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, Control box, burner control -Manufacturer: Landis & Staefa, automatic burner control unit -Type: LMG22.130A27 -Dimensions: 90/60/H60 mm -Weight: 0.2 kg

WEISHAUPT RGL 40/2-A BURNER Power: 500 - 3400 kW Available: Immediately Description: - Execution: ZM - Gas Type: N / Category II - Connection Pressure: 100 - 4000 mbar - Heating Oil: EL according to DIN 51 - Oil Throughput: 55 - 286 kg/h The burner burns both natural gas and heating oil. It was in daily use until it was decommissioned. The burner was maintained annually and is fully operational. Find more here - / Contact us at -

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LFL1.622 -Voltage: 220-240V -Frequency: 50-60 Hz -Price: per piece -Number: 2 pieces -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

Switchgear, control, UV light -Type: Honeywell EC7830 A 1066 -Dimensions: 130/130/H115 mm -Weight: 900 g

High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg

Heating, burner, gas burner, fan burner, gas fan burner -Manufacturer: Dreizler, fan burner type GE 200/300 AR 2 -Nominal heat output: 355 kW -Gas type: natural gas -Gas connection: 20 mbar -Blower motor: 0.37 kW -Dimension: 760/510/H535 mm -Weight: 33 kg

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Zinser, Burner set in a metal box -Burner sizes: No. 00 to No. 4 (max. 9 mm) -Cutting torch: A -Accessories: see pictures -Dimensions case: 320/200/H65 mm -Weight: 2.8 kg

Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible.

Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Manufacturer: Auka Rhöna, burner set in a tin box -Burner sizes: 2-4 / 4-6 / 6-9 mm -Cutting torch: -Accessories: see pictures -Dimensions case: 450/190/H55 mm -Weight: 2.9 kg

Preheating burner, bitumen burner, flame weeder -complete with hose and regulator

Heating, burner, gas burner -Gas type: Natural gas (Liquefied petroleum) -Gas connection: 20 mbar to 1000 mbar -Nominal heat output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg

plasma cutter CUT 60P (Pilot arc) in neat, working condition. Ideal for cutting steel, stainless steel and aluminum - Comes with: Plasma burner (torch), Ground clamp, Hoses and cables, Pressure regulator / air filter, Storage box with accessories, Protective cover ✅ Condition: Working and tested

Loos International Weishaupt Brenner 1700 L Volume 1500-1630 KW 6 Bar 110 Degree Temp. Year of construction 2003

Fuel: Natural gas, power range: 100kW-1000kW, connection pressure range: 15mbar-500mbar, NOx class: 2. An on-site inspection is possible.

An originally packaged Weishaupt burner is available. Thermal output range: 145kW-570kW, flame head: W40/1, typical pump pressure setting: 12bar, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Nozzle Cleaning Machine, Torch Cleaning StationGas Nozzle Cleaning Device for MIG MAG Robot Welding Systems BINZELTtype BRSIdent. No.: 8310260 Equipment No.: 4212 Year of construction: 1998Welding nozzles Dirt cutter for robot with arc welding machineOperating voltage: 24 Volt DC/DC voltageCutter diameter inside: 8 mmCutter diameter outside: 12 mmLifting movement: 50 mmPneumatics Compressed air connection: 6 to 8 bar- Milling drive via air motor (desoutter)- Pneumatic cutter feed movement (lifting movement)- Replaceable cleaning cutter-

A mint condition gas burner Elco is available. Burner capacity range: 510kW-950kW, gas types: G20/G25/G31, emission class: 3, combustion controller: TCH 5xx, max. gas inlet pressure G20/G25/G31: 300mbar/300mbar/148mbar, operating time: approx. 4 months. Machine dimensions X/Y/Z: approx. 600mm/550mm/1200mm, weight: approx. 90kg. Documentation available. An on-site inspection is possible.

Equipped with: gas tank, barmeter, Honda GX 120 engine, petrol, burner, Auction-ID: A1-40133-198

Additional title: gas burner for steam generator, Min. capacity: 900 kW, Max. capacity: 5100 kW, Min. pressure: 10 mbar, Max. pressure: 140 mbar

Large steam generator LOOS, type: UL-S including gas burner WEISHAUPT G50/2-A - LOOS steam generator, built in 1991 for 6,000 kg of steam / h - Steam capacity: 6,000 kg/h - WEISHAUPT burner, built in 2013 - Burner power: 600 - 5,400 kW Viewing possible on request.