burner used for sale

Key data: 700 °C, 2400 mm, 6500 mm

1 piece gas-fired chamber furnace with air circulation and bogie hearth Type: KLWg 220/180/650 for unsupervised operation for three-phase three-phase current 400 volts/N, 50 Hz. for temperatures up to max. 700°C for natural gas "H" External oven dimensions approx. Width in mm: 3400 Width with control cabinet in mm: 3800 Height in mm: 3200 Length with inserted. Bogie hearth in mm: 8000 Length with fed. Bogie hearth in mm: 15500 clear interior dimensions approx. Width in mm: 2400 Height over beams in mm: 1800 Length in mm: 6500 Volume in m³: 25,7 Batch dimensions max. Width in mm: 2000 Height in mm: 1500 Length in mm: 6100 Weight max. in kg: 20000 Connected loads approx. Number of rule groups: 4 Number of burners: 8 Total burner power in kW: 720 Burner air blower in kW: 5.5 Circulating motor in kW: 22 Number of circulating motors: 4 Bogie hearth d ...

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Used rack oven WINKLER WACHTEL, Type: Compact 1.10 -In very good condition- - with gas burner or oil burner - for sheet metal trolleys 60 x 100cm - Sheet size: 58 x 98 cm - 2 pieces available (year of construction 2010 and 2012) The ovens are in very good bakery condition and are immediately ready for use. A visit is possible by arrangement.

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Miwe rack oven Type: Roll-In RI 1 0608-TL Year of construction 2014 with Weishaupt gas burner (convertible to oil burner) black front Stainless steel cladding for 1x car 60x80  for 58x78cm sheets with hood and fan with ramp with water filter 400/230v 3/N/PE 50Hz very good condition Height: 263cm Width: 154cm Depth: 160cm Several in stock

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Miwe rack oven Type: Roll-In RI 1 0608-TL Year of construction 2014 with Weishaupt gas burner (convertible to oil burner) black front Stainless steel cladding for 1x car 60x80  for 58x78cm sheets with hood and fan with ramp with water filter 400/230v 3/N/PE 50Hz very good condition Height: 263cm Width: 154cm Depth: 160cm Several in stock

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Working surface: 12.000x4000mm, with three autogen burner and one plasma burner, including documentation, accessories and spare parts.

Miwe rack oven Type: Roll-In RI 1 0608-TL Year of construction 2014 with Weishaupt gas burner (convertible to oil burner) black front Stainless steel cladding for 1x car 60x80  for 58x78cm sheets with hood and fan with ramp with water filter 400/230v 3/N/PE 50Hz very good condition Height: 263cm Width: 154cm Depth: 160cm Several in stock

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

Miwe rack oven Type: Roll-In RI 1 0608-TL Year of construction 2014 with Weishaupt gas burner (convertible to oil burner) black front Stainless steel cladding for 1x car 60x80  for 58x78cm sheets with hood and fan with ramp with water filter 400/230v 3/N/PE 50Hz very good condition Height: 263cm Width: 154cm Depth: 160cm Several in stock

Very rare to see a G90 on the market ! This Probat with a 90kg capacity per batch has been manufactured in 1967 and refurbished by Giesen in 2010, since then it continued to run like a workhorse until a couple year ago when it was replaced by a new machine. It is now ready to ship and to work. The setup includes a destoner and a green coffee loader. Computer connection to work with Artisan or Cropster The propane gas burner is connected to a thermoregulator allowing to reach various set temperatures in a defined time but you can also work manually by activating the burner at 1/3, 2/3 or 3/3 of its full power. This fantastic roaster has always worked great and it has been maintained every year by a Probat agent. It hasn't lost more than 200ml of gear oil in the last 8 years of use. If you are not familiar with this particular type of investment, please note that it do ...

PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor Travel speed: up to 25m/min Z-axis control system: THC My plasm system Collision system, protecting the burner against damage Linear guides: TBI Automatic material detection system Power supply: 240V Payload: 1700kg Total weight: 1200kg net INCLUDED: Bdpq7l - control panel -water table -interchangeable grate -control program in German, English, Polish -CE declaration of conformity -DTR -warranty Choose the right Hypertherm cutter for your individual business needs.

PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor Travel speed: up to 25m/min Z-axis control system: THC My plasm system Collision system, protecting the burner against damage Linear guides: TBI Automatic material detection system Power supply: 240V Payload: 1700kg Total weight: 1200kg net INCLUDED: - Hypertherm 65A source - control panel -water table -interchangeable grate -control program in German, English, Polish -CE declaration of conformity -DTR -warranty Choose the right Hypertherm cutter for your individual business needs.

used Kemppi TIG welding machine KEMPPI MasterTig MLS 4000 TIG welding machine Power 400V 16A Power max 400A With pulse function Control panel MTX Water cooling Mastercool 10 Carriages With burner Kemppi TTC 250W (ampere adjustment on the burner) ,Ground cable, without pressure reducer Good condition Fully functional. Viewing and pick-up possible Shipping Germany (without islands) 110,00 Euro net The goods can be viewed at the location 59379 Selm by appointment. F0wy2lgoa You will receive an invoice with VAT. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Machine type: MIG/MAG welding system Make MERKLE Type ME 283 LK Attachment no. 13.539 Connection voltage 3 x 400 volts Setting range 35 – 280 amps Duty cycle 20 % d.c. at 280 amps 60% d.c. at 200 amps Current adjustment 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 855 x 375 x 590 mm Weight 79 kg Optional accessories for point and interval equipment Age: approx. 25 years Condition workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts  ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...

Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Used Viessmann steam boiler with a capacity of 995 kg of steam per hour and a pressure of 10 bar. New 1994. Gas burner. Type Turbomat-R HDD. The dimensions of the boiler are: - length (including burner and flue stub - 3100 mm, - width (including stubs for water gauges) - 1600 mm, - height (including stubs for valves and sensors) - 1800 mm.

Machine type: MIG/MAG welding system Make MERKLE Type M 254 K Appendix No.: 22.538 Connection voltage 3 x 400 volts Setting range 25 – 250 amps Duty cycle 60 % d.c. at 250 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 760 mm Weight 110 kg Age: approx. 25 years Condition workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire D 300, 5 kg 1 pair of welding gloves with cuff 1 piece spare parts cheese cpl. Equipped 1 can of non-stick spray  ...

Cutting torch, for flame cutting machine AUKA REKORD Burner neck length: 200 mm Burner neck diameter: Ø 25 mm Gas connection: G 3/8 L Oxygen connections: G 1/4 R New ! Dimensions: 355 x 115 x 75 mm

Capacity: 90kg of green coffee per roast ( up to 360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt-idirect The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.

Machine type: MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Serial No. 81.838 Connection voltage 3 x 400 volts Setting range 25 – 200 amps Duty cycle 30 % d.c. at 200 amps 60% d.c. at 140 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Portable compact system design Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age approx. 12 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece facing glass white 1 piece  ...

Capacity: 75kg of green coffee per roast ( up to 300kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Probat-direct The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with R3852389 automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.

-Rotary oven Baking cabinet Miwe Rollin -for 60x80cm sheets -with exhaust hood -with gas burner / oil burner -Nominal consumption 2.6 kW -Nominal heat load. 85 kW -3N- PE- AC 400V 50Hz -with ramp -Year of construction: 2007 -External dimensions approx. 153x160cm and 282cm high

Pellet heating, pellet stove, biomass stove used. Manufacturer: ELMEC Group Srl Type: B-MAX 300 EBBR020300-P01 Year of construction: 2018 Burner power max. 300 kW Nominal power 250.2 kW Max water temp. 90°C Boiler dimensions: approx. 1700 x 1100 x 1650 mm Additional burner approx. 1000 x 500 x 900 mm Pellet hopper approx. 800 x 800 x 1200 mm + auger Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Machine type: MIG/MAG welding system Make: Werner Type Wemag 300 K-1 Connection voltage 3 x 400 volts Setting range 40 - 300 amps Duty cycle 60 % d.c. at 300 amps 100% d.c. at 230 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile industrial plant Wire feed gearbox toothed 4-roller gearbox Fuse 32 amps Dimensions L x W x H 1100 x 420 x 720 mm Weight 135 kg Age: 32 Years Optional accessories 2-stroke / 4-stroke Condition workshop-tested, good, incl. UVV workshop test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece of pressure reducer argon with 2 pressure gauges 1 piece welding wire D-300, 5 kg 1 piece of welding gloves with cuff 1 piece spare parts box cpl. Equipped 1 piec ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare  ...

Miwe rack oven Type: Roll-In e+ RI 1 0610-TXXL Year of construction: 2020, 2019, 2017 and 2016 with fuel oil burner (convertible to gas burner) Stainless steel cladding for 1x trolley 58×98cm with extractor hood and fan with drive-on ramp 400/230V 3/N/PE 50Hz very good condition Height: approx. 263cm Width: approx. 160cm Depth: approx. 160cm

Inv. Num. : 4741 Type: IR-SA 840 M Producer: Tiesse Created: 2006 Parameters: Table dimensions: 2410x930 mm Height: 3300 mm Width: 7000 mm Length: 5600 mm Equipment: Robot KAWASAKI FA 06 E C14 VK Robot Support MIG welding machines: Fronius Transpuls Sinergic 5000 Inverter TIG welding machines: Fronius Trans TIG 3000 DC Welding torch: ROBO 455 S S. Fronius FK4000 cooling unit Burner support: Binzel MOD CAT CPL-M Space for Fronius VR 1500 Euro 4R wire feeder Burner cleaning station Binzel MOD BRS-LC

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 123.585 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 4 years Condition workshop-tested, very good, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 p ...

Machine Type: Pulse-Arc Inverter Welding Machine Make MERKLE Type HighPULSE touch 450 DW Plant no.: 125.127 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 60% ED at 450 amps 100% ED at 360 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive DV 31, speedometer motor Fuse protection 32 amps Dimensions L x W x H 1,210 x 430 x 1,100 mm Weight 123 kg Age 3 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 504 W, 3 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 ...

Automatic burner control, Burner Control -Manufacturer: Kromschroder -Type: TC 410-10T -Number: 1x machine available -Price: per piece -Dimensions: 115/100/H120 mm -Weight: 0.4 kg

The AJAN SHP 260 A plasma cutter was built in 2010 in Turkey. The machine is in continuous operation. I am selling due to upgrading to a newer model. Characteristics of the AJAN SHP 260 A plasma cutter - cut materials: structural steel, stainless steel, aluminum - maximum cutting speed: 15 m/min - maximum sheet size (length x width): 6 x 2 m - minimum cutting thickness (structural steel): 0.5 mm - maximum cutting thickness (structural steel): 60 mm - minimum cutting thickness (stainless steel): 0.8 mm - maximum cutting thickness (stainless steel): 20 mm - minimum cutting thickness (aluminum): 1.2 mm - maximum cutting thickness (aluminum): 25 mm - total power requirement: 52 kW - power of the plasma source: 260 A Equipment of the SHP260l plasma burner - CAD/CAM software: AJANCAD, Lantek Pulsar - machine plasma source: AJAN PP 260 A - autopsy and extraction table with ...

rack oven Wachtel Compact 1.8 Revolution from 2015 with gas burner and 2 rack trolleys with 18 shelves each for 58x78cm baking trays. The stove is completely assembled and immediately available in the warehouse in Bielefeld. Trade-in and delivery available, more pictures and details on request. -Year of construction 2015 -with gas burner -Door hinge on the left -with exhaust hood including fan -with digital control -for 60x80 or 58x78cm trays

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

KT7CNC Silver KRP 150-300 plasma cutting machine with water table Date of purchase: 2020 - used for a few months Integrated control module, fully galvanized and compact design. • Working area 150 x 300 cm • idle speed up to 25000 mm/min • Z axis working range = 110 to 270 mm • table load capacity 4000.00 kg • CAM software, proprietary, in Polish • grinded strips and gears • ergonomic control panel adjustable in two planes, monitor screen covered with tempered glass • TSC – a unique double homing system, additionally protecting the burner against accidental damage • Stop &Go – a system that allows you to simulate the smoking process, easy start, manual smoking • QS – quick start of the machine, ready in less than 1 minute. • ball conveyors facilitating material application • openings allowing easy transport of the machine using forklifts � ...

A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request

Capacity: up to 30kg of green coffee per roast (120kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG Burner: Probat – direct, modulated New chaff cyclone with a wheeled bin for easy chaff disposal is included with the roaster. New pneumatic green coffee loader included. New destoner optional. The roaster will undergo a major refurbishing, the process will include: - inspection, sandblasting, cleaning and repairing all of the parts, - installing new insulation, - installing new bearings, - installing a new / repairing the drum cover, - installing new direct drive motors with speed control on the drum and exhaust fan, - making a new electric cabinet and controls ( PLC and touchscreen with connection to Artisan of Cropster), - installing new cooling bin sheathing, - rebuilding the burn ...

- Platform scale for the weight of raw coffee; - Pneumatic loader for raw coffee, with collection tank for 60 kg green coffee; - Vittoria semi-automatic roaster; roasting capacity per cycle: 60 kg. Cycle duration between 15/17 minutes. Electric panel, toasting cycle control with automatic unloading. Probes for temperature detection and the possibility to set and adjust the roasting curves; - Opening toaster by compressed air control as well as emergency opening always controlled automatically for operator safety; - Roasting drum internally connected to a water outlet, for fire safety, which can be operated automatically or manually; - Methane burner; - Film maker with continuous film expulsion system; - Baltur smoke burner; - Cooling tank with safety grid protection and suction circuit; - Electro-pneumatic stone remover with silos, complete with suction fan; - Stone removal sil ...

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...