maximum number of results exceeded > 1000
please refine your search
Weight approx.: 1600 kg Dimensions (l x w x h) approx.: 3350 x 2902 x 0 mm Description: FERRERA M2 Buffing & Polishing Machine - Effective payload at bodies L/B/H: 900 x 1800 x 1094 mm - Effective payload at flat parts L/B/H: 950 x 1800 x 204 mm - working height of aggregates: max. 1094 mm min. 745 mm - material thickness: 5 â 1094 mm - drive of buffing unit: 3,00 kW - drive of polishing unit: 0,55 kW - vacuum clamping device: 2,20 kW - drive of X and Y axis: 2 x 0,37 kW - motorized height adjustment: 0,55 kW - drive: toothed racks, gear units, chains and toothed belts - total dimensions L/B: 3.350 x 2.902 mm - electric installation: control cabinet at the machine - total connection: 7,9 kW, 400 V / 50 Hz / 3 P
Code: 0255 Brand: VEGA Model: 88 Manual buffing machine - It is suitable for polishing of polyester or polyurethane coats and other types of materials - Pad diameter mm 160 - Motor power Hp 0,50 - Rpm 1380 - With wheel for movement - Overall dimensions: mm 1200 x 1200 x 1850 h - Weight kg 140
Weight approx.: 300 kg Dimensions (l x w x h) approx.: 1800 x 700 x 1600 mm Description: Max working width: 1,.100 mm, with charger at height 560 mm
Buffing unit - 1 motor
Oscillating buffing unit HOMAG
Wandkettenstsemmer OLMA with div chain sets L x W x H: 70 x 60 x 100 cm Weight approx. 300 kg Built in 1962 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
x-travel: 500 mm y-travel: 380 mm z-travel: 350 mm work table:: 700 x 350 mm spindle taper ISO: 40 stroke of quill vertical: 50 mm spindle turning speed range: 20-4000 U/min feed range: 1-3000 mm/min rapid traverse: 5 m/min table load capacity: 250 kg control: Heidenhain 232 total power requirement: 11,3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cleaned, function-tested, test run with cuff motor Used Make Festo Type KF Stand machine Door rest Stulpmotor Suction connection D 50 mm Space requirement approx. LxWxH mm 1200 x 800 x 2000 Weight approx. 200 kg Total connection value 1 kW Warehouse 97447 Gerolzhofen Handover in actual condition as inspected - free loading -
Multi Gastronomy Technology GS A37 DVGW Spuelmachine Glaeserspuel machine; Manufacturer: Multi-Tech Technology Type: GS A37 DVGW technical Data: 230 Volts x 50Hz 12 A 2480 Watt Condition: used; Article number 12739; Please include for enquiries
Package width: 430mm, package length: 350mm, capacity: approx. 20cycles/min.
G 2500 starting cutting force: 30 T drive: 7.5 KW roll dimensions: up to 1500 mm length up to 1200 mm roller height even up to 850 mm roll diameter available and special sizes. Suitable for the cutting rest roles with Pape, paper, foil, aluminium foil, etc.
Rotary, 2-lane, with 2 sets of format for 75er and 95 Cup Vordoseur for fruit with servo drives Hauptdoseur with servo drives Sealing lid station Sealing station mechanical date printing Clip-on lid station The conveyor belt Control cabinet with S7-1200 control and operator Terminal
G 3500 from cutting power: 2 x 25 T drive: 11 KW roll dimensions: up to 2000 mm width up to 1200 mm roller height even up to 850 mm roll diameter available and special sizes. Suitable for the cutting rest roles with Pape, paper, foil, aluminium foil, etc.
x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm table-size: 800x250 mm control: 432 taper ISO: 40 turning speed range: 80-4000 U/min Motor power: 3 kw quill stroke: 80 mm total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: m with hand wheels 3-axis with coolant device. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REVISED OFFER! Paper Cup Making Machine Productivity: 60-80 pcs/min. Size of cups: from 6 to 34 oz / available: 6.5 and 7,5 oz for vending New Ultrasonic system New 2 airguns extra SWISS made Power supply: 380 V/ 50 Hz Power consumption: 16 kW Dimension of the machine: 2,800 x 1,600 x 1,500 mm In production: yes Condition: excellent Automatic Paper & Board Cutting Machine Format: 70/ 50 cm Automatic loading Automatic unloading Power: 380 V/ 50 Hz Power consumption: 5 kW Dimension of the machine: 2,000 x 1,000 x 1,500 mm In production: yes Condition: very good Offer for separate is also available. All information is given by the source, which deemed reliable. Availability is subject to prior sales.
x-travel: 420 mm y-travel: 200 mm z-travel: 330 mm spindle taper: SK 40 table load: 200 kg carrier height until: 16: 11,2 - 355 mm/min. spindle turning speed range: 16: 56 - 1800 U/min table surface area: 710 x 315 mm Dimensions (L/W/H): 1,6 x 1,3 x 2 m total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: m Electric 380 Volt: 3-axis digital readout: Fagor Cooling equipment: Central lubrication: Additional adjustment of the traverse increases the working area of the machine! Ball screws in the x + y axis, automatic feeds in all 3 directions. Dealer with own stock of 2500 mÂ². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm milling spindle: SK 40 quill travel: 95 mm hob turning speeds: 20-4200 U/min feeds longditudinal/cross/vertical: 0-10.000 mm/min rapid traverse: 10 m/min spindle motor: 11,5 kW electrics - voltage/frequency: 380/50 V/Hz control: Haidenhain TNC 407 clamping table: 1200x560 mm distance work spindle /surface of the table: 645 mm table load: 700 kg spindle head swivable left - right: +/-75 Â° total power requirement: 16 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4x3,5x2 m horizontal spindle with asideable vertical milling head, 75Â° tiltable complete housing with security equipment Switch-on hours: 50035 documentation, disc (parameter of the machine) electronic handwheel, new window panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hildebrand washing machine, type: H 1141, machine number: 1004-1660146, 400 V, 50 Hz, inside dimensions: 1320 mm x 660 mm, total dimensions: 1620 mm x 1050 mm x 1850 mm. Technical condition unknown.
Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)
Portioniermaschine Kolbe P100 for the use with a big mincer. The Portioniermaschine portioniert with the help of the length of the mince about a light barrier the mince. Ideally for self-service packaging. Several machines available
x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm table-size: 800 x 420 mm Dimensions (HxWxD): 1400 x 1800 x 1900 mm power capacity: 3 kW weight of the machine ca.: 1,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
You buy a Storrag HeckertMission HX 151/24 Absolute top price ! The plant was only used for finishing and is owned by one of the largest companies in the world. The system was regularly serviced and, if necessary, all wear parts were immediately replaced. There are 2 machines as well as a slightly larger one for finishing. All were constantly revised. The plant is located in Switzerland 5242 Birr. On request, we can take care of the dismantling and transport Starrag MillH- 151 /24 Bucket milling machine rigid milling machine bucket mill
Previous use: Construction adhesive production for filling pasty materials in 1L light bottle filling (cylindrical bottles). Other format sets possible when replaced, as well as liquid filling! - Under-mirror filling - Capacity: approx. 1000 bottles in 6 hours, these were then manually packed in cartons of 6 bottles each. Remaining daily working time used for cleaning work. The speed may be higher if the material does not foam. - semi-automatic - 1 employee necessary to operate Functional description Manufacturer: The empty containers (e.g. bottles) are provided on a conveyor belt and reach the packaging machine via it. At the end of the belt, the containers are inserted sporadically and tactically into the carrying motor of the round clock table of the filling and sealing machine. At the following stations, the containers are filled, sealed and output on a conveyor belt. The bo ...
Weight approx.: 900 kg Dimensions (l x w x h) approx.: 2600 x 1300 x 1300 mm Description: Combined surface planer/mortiser: Surface Planer: max working width: 400 mm, table length 2.540 mm mortiser: plan dimensions: 500 x 250 mm
; good fully functional condition
Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
URGENT - MACHINE MUST GO ! Machine back to production for current orders upto the middle of Feb 2020! Contact us if interested in inspection. Mfg: 1976 / Overhauled 2009 Mfgr: W+H Status: in operation as of 11/11/2019 but dismantled soon. Second hand Flat/Satchel Bag Making Machine with:- â€¢ 4 Color in-line printer â€¢ Window unit / Nordson hot melt Bag Width : 50 - 260 mm Bag Length : 160 - 450 mm Format Gear: 38 / 34 / 30 / 25 Forming Plate: 210 / 180 / 160 / 150 / 120 / 100 Format sleeves All information stated above is from the source, which deemed reliable. Ex.Works Europe, excl. VAT, dismantling, packing and delivery. All machine or equipment is offered as is where is with any faults without warranty.
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm table-size: 700 x 460 mm spindle turning speed range: 40 - 5000 U/min rapid traverse: 2 - 4000 mm/min spindle taper ISO: 40 spindle motor: 5,5 kW quill stroke: 80 mm control: DIALOG 4 total power requirement: 15 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,5 x 2,9 x 1,9 m - CNC control DIALOG 4 / Contour 3 for 3 axis - horizontal/vertical spindle - coolant device - vise The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Operating voltage: 400 volts, power consumption: 10.5 kW, working range: 600 x 400 x 400 mm, control Heidenhain type TAK 135 ST, adjustment of the spindle stick in the horizontal transverse axis: 400 mm, pinole stroke of the horizontal and vertical working spindle: 80 mm, working spindle speed: 50 - 2500 rpm, Feeds in the X/Y/Z axes: 5 - 1000 mm/min, feed express speed X/Z axes: 4m/min Y axis 2 m/min, tool holder: ISO 40, total weight: approx. 2,300 kg, space requirement Length width x height: approx. 2,200mm x 2,800mm x 1,900mm Mistakes reserved! MAHO MHC 700P manufacturer MAHO type MHC 700P year 1981 serial number 75548 working range X = 600mm Y = 400mm Z = 400mm tool holder ISO 40 horizontal+ vertical spindle 80mm RPM / spindle 50 - 2 500 rpm shift / swing 5-1 000 mm /min rapid speed X+Z- Axis: 4m/min Y -Axis: 2m/min control Heidenhain TNC135 sp ...
A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...
Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.
Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table
URGENT - MACHINE MUST GO ! Cobden Chadwick No. 3 with 2 color in-line printer Mfg: unknown, Overhauled in 2018 Mfgr: Cobden Chadwick Status: currently dismantled Second hand Flat/Satchel Bag Making Machine With:- â€¢ 2 Color in-line printer Bag Width : 100 - 480 mm Bag Length : 200 - 600 mm Max.Web width: 1050 mm Complete Gear set (Machine & Printer) : 26 / 33 / 50 / 24 / 31 / 39 / 45 / 62 / 29 / 43 / 35 / 61 / 53 / 30 / 40 / 56 / 42 / 46 / 48 / 52 / 60 Forming Plate (Flat) : 250 / 300 / 310 / 350 / 430 Forming Plate (Gusset) : 150 / 210 / 280 / 330 / 370 All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales. All information provided in this offer is from the source(s), which is/are deemed ...
Form Fill and Seal Machine (FFV) Manufacturer: Illig Type: FS 37 Year of construction: 1993 Filling quantity: 200/250/500 grams Performance: approx. 10,000 cups/h including: Tray Packer Manufacturer A + F Type: 410-4/6W1 Year of construction: 1993
Number of straightening rollers: top: 9 Number of straightening rollers: bottom: 10 top roller diameter: 12 x 1000 mm under roller diameter: 12x 1000 mm sheet width: 1000 mm Space requirement approx: 2500x2200x2100 Space requirement approx: (without rellenbahn)700x2200x2100 Two driven roller conveyors for the production of the factory work area Stainless
Make : TREPKO Model : PKG 1S Cups : 8 Circles pre Minute : 32-40 Cup Sizes : 75 and 95mm Filling Volume : 50gr -500gr Stations : Cup denester - Filling - Aluminium Placing - Heat Sealing - Conveyor Condition : Good HEPA Filter Mounted Closed Cabin Safety Switches Control Panel Available : Immediately
Facilities: Height adjustment of the brush units by handwheel with numerical display Brush diameter 200 mm Machine in standard version, CE Technical data: Working width 600 mm Max working height 300 mm Suction nozzle DM 2 x 140 mm Engine power carpet feed 0.37 kW Feed speed variable 3 - 20 m/min Engine power brush unit 4.0 kW each (option 5.5 kW) Machine weight approx. 750 kg further technical data: see brochure in the annex incl. ACCESSORIES: - Steel brush, brass-coated, DM 200 mm - Brush TYNEX, DM 200 mm
: 230 x 1.240 mm : 650 x 305 x 405 mm : 40 ISO : 750 mm : 650 mm : 305 mm : 405 mm : 90 Â° : 45 Â° : 86 mm : 127 mm : 2,2 kW : 2.045 mm : 1.630 mm : 2.070 mm : 1.100 kg 3-axes digital read-out aut. feed for X- and Y axis aut. quill feed infinitely variable spindle speed left- / right-handed rotation head can swivel on 3 axes panning r + l 90Â° tilting forward + back 45Â° turning on the column 45Â° hardened and ground guidings and work table halogen working light cooling equipment central lubrication for spindle, lead screw and slideways operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH torquing arbor swarf plate operator tools users manual in GERMAN and ENGLISH table: 230 x 1.240 mm working area: 650 x 305 x 405 mm taper: ISO 40 revs: 50 - 3.750 r.p.m. longit. travel man. feed: 750 mm longit. travel aut. feed: 650 mm cross tr ...
Manufacturer: SCHLEICHER Tip: RMSV 12/70 Number of straightening rollers: 12 Directional rollers Diameter: 70 Sheet width: 300-1050mm Room requirements approx: 4700x2900x2800mm
x-travel: 1000 mm y-travel: 500 mm z-travel: 700 mm total power requirement: 20 kW weight of the machine ca.: 8,5 t Table travel: X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Table size (fixed angle table) 700 x 1,250 mm Min./max. distance from vertical spindle to table top 138 / 498 mm Distance between spindle and column, max. approx. 800 mm Spindle taper SK 50 Spindle stroke (quill), vertical / horizontal 100 / 125 mm Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feeds, X, Y and Z axes 1 - 3,000 mm/min Quick feeds, X, Y and Z axes 6,000 mm/min Spindle drive 15 kW Total electrical load, approx. 20 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features MAHO Continuous Path Control, Model CNC 432, for 3 axes, with colour monitor, graphics, and all the usual subprog ...
x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm spindle taper: 40 SK turning speed range: 18 - 6300 U/min paper band filter: 515 mm table load: 350 kg air temperature of the exhaust valve: 0,001 mm rated capacity boring motor: 3600 x 4900 mm hollow in the drive pipe: 8 kW : 3300 kg : 475 kg total power requirement: 380 50 23 kW weight of the machine ca.: t dimensions of the machine ca.: m feed ranges are freely programmable: hydr. tool clamping: for simple and fast tool change: great doors allow a good access to working area: tool changer for 26 tools: the tool magazine get managed by the control: cooling system: cooling & used oil box: : generous designed swivel panel with display: and control: operater manuals: programming instructions: CNC dialog 4 control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gea Finnah model: 2209013 year: 2000 Cup form, fill & seal for cream up to 36.000 cph Product: lemon juice ,cream, condensed milk Volume: 10 g Inner cup diameter: 32 mm
Second hand paste filling machine by HAMBA (Germany) model BK 6004M. Machine had been working on packaging margarine into plastic cups. Current cup diameter 127 mm. Filling dose range from 200 g up to 500 g. Machine fills plastic cups transported in four lines. Collects lids and closes cups. Working output up to 60 cycles per minute, what gives up to 6 tons per hour or 12000 cups per hour. Together with filling machine there is integrated second hand cartoning machine by SCHAFER & FLOTMANN (Germany) type SFS 355 packaging margarine cups into the cartons. Machine is assembling cartons and is packagings 3 cups x 2 in 4 layers with 3 slip sheets. Final weight of carton 12 kg. Output up to 12000 cups/hour. Includes electric cabinet (Siemens).
3-Roller Metal Spinning Machine, after General Overhaul YOM: 2003/1974 General overhaul: 2003 in Germany. Since a lot of years is conserved. Location: Stock in Cologne (Köln), Germany Max. workpiece lenght: - Normal: 720 mm - By adjustable tailstock: 1250 mm Min / Max. diameter of workspiece: 100 / 550 mm Max. round blank: 650 mm Support length way: 800 mm Feed force length: 25000 kp Support speed length - forward stroke: 1100 mm/min - express turn stroke: 6000 mm/min Stroke of over support: 60 mm Capacity of over support: 13000 kp Stroke of holding device continuously till: 6,56 mm Speed range grade 9 (36-635) rtm gradeless 36-635 rtm Main motor: ...
x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm total power requirement: 24 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m M I K R O N (Switzerland) CNC Controlled Universal Milling Machine with Tool Changer Model WF 54 VH CNC Year 1991 Serial No. 5110302 ________________________________________________________ Table travel, X axis, longitudinal 710 mm Table travel, Z axis, vertical 500 mm Milling head travel, Y axis, cross 500 mm Mounting height below vertical spindle, approx. 600 mm NC rotary table 800 mm Resolution of rotary table, C axis 0.001 Â° Spindle taper SK 40 Spindle speeds, 3 steps, infinitely variable 10 - 6,300 rpm Feeds, XYZ 2 - 4,000 mm/min Quickfeed, XY 10,000 mm/min Quickfeed, Z 8,000 mm/min Spindle drive, approx. 15 kW Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 7,000 kg Accessories / Special Fe ...
x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm control: DIALOG 4 spindle taper: SK 40 spindle turning speed range: 0 - 6300 U/min table-size: 1.000 x 550 mm table load: 600 kg feeds -stepless-: 2 - 3600 mm/min rapid traverse: 6,0 m/min power capacity: 9,5 kW quill stroke: 80 mm coolant: voltage: 380 V total power requirement: 20 kVA weight of the machine ca.: 4,4 t dimensions of the machine ca.: 1,90 x 4,00 x 2,30 m coolant tank: 1,80 x 0,80 x 0,20 m electric cabinet: 1,65 x 0,80 x 1,25 m Machine overhauled geometrically in 2012 by Company ARNOLD D-90579 Langenzenn - Fabr.No.: 2806-0279 - Control: DIALOG 4 - electronical hand wheel - horizontal milling spindle - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.