bran used for sale

Undercarriage for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). But it certainly also fits on other machines, e.g. Brandt (might have to be adjusted a bit) Length of the U-profiles approx. 1130mm Body height incl. castors approx. 150mm 4 sturdy steel castors as swivel castors with grease fittings 2 Brakes 2 support plates for height compensation The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

General SKUR0082 MakeBran + Luebbe Norderstedt (D) TypeE-P 36 Mach.No.9136896 Year of construction2000 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Dosing pump Number of pumps:6 With motor1,5 kW 230 Volt With frequency invertercheck Dosing pumps MaterialStainless steel General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,2x0,9 M Total height1,5 M Weight350 KgOils & fatOintmentsBiotechnologyAgrochemicalsDosing pumpsFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesBeveragesDyes & pigmentsAPIBran + LuebbeIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > OintmentsIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsPumps > Dosing pumpsIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Phar ...

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Machine in good condition, fully functional, under power, current after major service. Find more here - .ucymachines/ Contact us at - sales@ucymachines

This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information.

This BRANDT KDF 991 edgebander was manufactured in 2008. It is designed for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 991 edgebander. Contact us for more information.

General SKU322X560 LocationBarneveld CEcheck MakeKSB Main Features MaterialStainless steel Volume22000 Ltr. Motor18.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity22 m³/h With motor18,5 kW 380—420 V 2925 rpm (Ex) InletDN40 OutletDN65 Centrifugal Pumps MaterialStainless steel General TypeCPKC1 Mach.No.6-N12-596129 Year of construction2004 Mounted on framecheck Floorspace1,30 x 0,50 m Total height0,53 m Weight330 kgOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chem ...

General SKU322X559 LocationBarneveld CEcheck MakeKSB Main Features MaterialStainless steel Volume80000 Ltr. Motor15 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity80—120 m³/h With motor15 kW 400/690 V 2940 rpm InletDN40 OutletDN40 Centrifugal Pumps MaterialStainless steel General TypeEtabloc-G 50-200/1502.2 610 Mach.No.9970484029 Year of construction2003 Floorspace0,68 x 0,30 m Total height0,40 mOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicKSBIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemi ...

This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine.

Edge banding machine Type: KDF 220 Manufacturer: Brandt Year: 2012 Pre-milling machine Radius Rondomat Radius cidliny Scrapers Machine in good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used machine Without pre-milling Edge Caps Front/Rear Milling Rounding Top/Bottom Milling Rounds Front/Rear Scraper Blade: Top/Bottom Polishing Top/Bottom

: 0,4-3 / 8 mm Workingpiece thickness from to: 8 - 50 mm Total length: 5.360 mm Feed speed: 11 m/min. total power requirement: 7 kw Weight: ca. 2.500 kg Premilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -Finishing unit: from BRANDT KM 36 edge banding machine -Motor: 0.18 kW -side: adjustable -Height: adjustable -Number: 2x aggregates available -Speed: 1x 1360 rpm, 1x 1250 rpm -Price per piece -Dimensions: 260/370 / H510 mm / 260/370 / H480 mm -Weight: 22 kg / pc.

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Edge banding machine, edge banding machine, edge banding machine, finishing unit, buffing unit, modular assembly kit, format processing unit, double-end profiler, edge processing machine, sanding unit, edge banding unit -Unit: from edge banding machine BRANDT KM 35 -Motor: Groschopp type PM1 72-35 - Mot 180 V / 54 W. -Individual components: see photos -Dimensions: 425/270 / H260 mm -Weight: 24 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Pneumatic components: Bosch -Individual components: see photos -Dimensions: 500/370 / H680 mm -Weight: 26 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, trimming unit from edge banding machine BRANDT KM 35 -Motor: Homag type LF-40-L -Power: 0.27 kW / 12000 rpm -Voltage: 220V / 200 Hz -Saw blade: Ø 90 mm -Individual components: see photos -Dimensions: 590/280 / H750 mm -Weight: 27 kg

Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable -Dimensions: 480/250/H490 mm -Weight: 29 kg

Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -Finishing unit: from BRANDT KM 35 edge banding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm -side: adjustable -Height: adjustable -Dimensions: 350/230 / H415 mm -Weight: 20 kg

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: Brandt Type of Machine : Edge Banding Machine Model: KDF 220 Year of Manufacture: 2012 Technical Specifications - Supply Voltage: 400Y/230V - Phases: 3-Phase - Frequency: 50 Hz - Fuse: 16 A - Maximum Operating Full Load Current: 14 A - Short Circuit Current Rating: 5 kA rms symmetrical - Control Voltage: 24 V - Largest Motor: 4.5 A - Largest Heater: 2.4 A - Enclosure Type: 1 Find more here - .ucymachines/ Contact us at - sales@ucymachines

! the regression shown in the photos is not included Equipment: - Electronics control power control PC 20+ - PU top pressure rollers - Motorized height adjustment upper pressure - Hood interior lighting - Infeed ruler adjustable and extended by program - Program adjustment pressure zone - Quickmelt application unit - Autom. Edge retraction - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, with pneum. 2-point adjustment - Pre-milling unit 2 x 0.55 kW - Milling unit 2 x 0.55 kW, with program Adjustment to edge thickness and multi-roller scanning - Shape milling unit top+bottom, 2 x 0.35 kW - Scraper blade with quick-change heads with additional device for pointed workpieces - Surface puller blade glue joint - Detergent specification workpiece - Buffing unit 2 x 0.18 kW - Interface electr./mech. for Ligmatech ZHR01 ...

Edge banding machine Brandt type KDF 670 Technical data: - Inlet ruler: manually adjustable - Joining milling unit with 2 motors each 2.2 kW: both motors pneumatically controlled - Hot melt glue manga - Pressure zone: with 1 main pressure roller and 3 post-press rollers - Cross-cut unit with 2 motors each 0.35 kW: automatically adjustable via program from chamfer caps to straight caps - Edge milling unit with 2 motors each 0.55 kW: for flush milling, chamfer milling or radius milling with 4-way fixed point adjustment for side scanning - Groove milling unit: with horizontal shaft - Copy milling unit with 2 motors each 035 kW: with pneumatic control in and out - Profile scraper unit: with pneumatic input and output control - Flat-pulling blade unit - Buffing unit

Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos

General SKU022A121 MakeBran + Luebbe TypeCentrisol MC-50 No.9190756 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor160 mm Specified Features - Inline mixer Continuous reactor(1x) Rotor sizesdia. 160mm, Mixing chamber dia. 200mm Inletdia. 50mm Capacitymax. 500 Ltr/Hr Motor7,5 KW, 400/690 Volt Rotor speed2915 Rpm Electric heating(330 Watt, 220 Volt, Max. 200 Degr. C.) MaterialStainless steel 1.4552 General LocationBarneveld Floorspace0,6 x 0,4 m Total height1,5 m Weight150 kg Technical specs Extra informationmixing chamber dia. 200 mmOils & fatGeneric medicinesOintmentsBiotechnologyAgrochemicalsCatalysts & fillersFeed additivesDiscountDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectioneryBeveragesDyes & pigmentsInline high shear mixersBran + LuebbeIndustri ...

Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview 2020 rotary 24-valve volumetric unit with fixed nozzles and a 1-head crown capper, rated 6000 Bottles/hour. Configured for PET containers in 1 L format with neck 28 and clockwise rotation. Manufacturer: VARIOUS BRANDS, Model: 24.8 volumetric. Non-aseptic and non-isobaric operation for still products. This compact Second-Hand PET Filler is a rotary monoblock filling machine suited to detergents, liquid soap, oil, spreads and sauces, and still water lines. This used filler for sale is presented as installed; format and utilities checks are recommended prior to commissioning. Technical Specifications & Performance Data Configuration: Rotary monoblock with volumetric filler and integrated capper Manufacturer / Model: VARIOUS BRANDS / 24.8 volumetric Year: 2020 Container material: PET Formats: 1 L Product types:  ...

grinding length: 500 mm grinding width: 230 mm table-size: 510 x 200 mm grinding wheel diameter: 225 mm weight of the machine ca.: 1.5 t Magnetic plate 1000x500mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge banding machine Brandt Ambition 1120 c with 2 glue basins, joints, corner copying and two Scraper blades. Good entry-level machine with extensive equipment. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 10 - 40mm Feed speed approx. 8m/min Noise protection hood Pull-out workpiece support Extraction connection 1x100mm, 4x80mm including the pictured piping to 200mm Easy-touch control with color screen for easy operation of the machine 10 programs can be saved Aggregates: Top pressure manual adjustment with crank and SIKO counter Infeed ruler manual adjustment with SIKO counter Joint milling with slide milling, sharpened A total of 2 interchangeable glue basins for a quick colour change from white to transparent Gluing part with automatic edge retraction for rolls up to 3mm Pressur ...

Equipment: - Extended inlet ruler - Joining milling unit 2 x 2.2 KW 200 Hz - Gluing unit A8 - Cross-cut unit chamfer/straight 2 x 0.18 KW - Pneumatic adjustment caps chamfer/straight - Milling unit 2 x 0.55 KW counter-rotation with multiple roller probing - Pneumatic 2-point adjustment - Program adjustment side buttons - Shape milling unit 1 x 0.35 KW WD 40 - Pneum. 2-point adjustment radius/chamfer - Profile scraper with quick-change heads and special keypad - Pneumatic adjustment of the scraper blade - Glue joint scraper blade - Buffing unit Technical data: - Workpiece width min: - At workpiece thickness 8-22mm ¦ 70 mm - For workpiece thickness 23-40mm ¦ 120 mm - At workpiece thickness 41-60mm ¦ 150 mm Depending on the workpiece length - Workpiece protrusion ¦ 38 mm - Workpiece thickness ¦ 8 - 60 mm - Edge height max.= workpiece height¦ + 6 mm - Edge m ...

Henkovac vacuum packers, brand-new 2023 models available from stock., Advertised in the photos, Henkovac M4, Henkovac M6, Henkovac D1, Henkovac D4, All models are equipped with upgraded vacuum pumps for more performance, sensor control, filling plates, soft-air., Contact us for more specific information and photos.

Key data: 8 mm, 8 mm

For sale is a Brandt edge banding machine bj. 2010 The machine was serviced by the Brandt company only 3 months ago. No defective available. For sale due to new acquisition. Special equipment in the pictures. Loading facilities available Price is net VAT

Compact 600 ist eine Flachschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 840×250 mm, Schleiflänge 600 mm, Schleifbreite 320 mm, Spindelmitte 500 mm; Längsweg 680 mm, Querweg 270 mm. Technische Daten: Schleifscheibe Ø300×50 mm (Bohrung 127 mm), Drehzahlen 665–2388 min-¹, Tischgeschwindigkeit 0–30 m/min, Quervorschub bis 3 m/min, Schleifspindel 7.8 CV, 3×400 V 50 Hz, Gewicht ~2600 kg, Abmessungen 1880×1430×2300 mm. Zubehör: Kühlmitteleinrichtung, Papierfilter, Elektro-Magnetspannplatte 600×250 mm, Zentralschmierung. Ermöglicht enge Toleranzen; Einsatz in Automotive, Luftfahrt, Maschinenbau, Medizintechnik und Uhrmacherei. Technische Daten ohne Gewähr

: 0,4-3 / 8 mm Workingpiece thickness from to: 10 - 50 mm Feed speed: 11 m/min. total power requirement: 6 kw Weight: ca. 1.160 kg Dimensions (L/W/H): 4.400 x 1.260 x 1.990 mm : Ja Flush/radius/chamfer milling units: Ja, Zwei Stück : Ja Buffing unit: Ja : 70 mm workpiece length - min.: 160 mm : Elektrisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workpiece thickness: 8 - 60 mm Workpiece overhang: 38 mm Edge material of the roll: 0.4 - 3 mm Edge material in strips: 0.4 - 6 mm. Min. workpiece width: 70 mm (with thickness 8-22 mm), 120 mm (with thickness 23-40 mm), 150 mm (with thickness 41-60 mm) Feed speed: 11 m/min Machine equipment: Joint milling unit, 2 x 2.2 kW motor Gluing unit with workpiece edge preheating Pressure zone with driven main pressure roller and 2 non-driven pressure rollers Hood unit, 2 x 0.18 kW, pneumatic adjustment phase/straight Radius and fine milling unit, 2 x 0.27 kW Form milling unit 1 x 0.35 kW Profile scrapers Glue joint scrapers

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Edge banding machine Brandt Highflex KDF 220 with jointing, corner copying and two Scraper blades. Very well automated. A video of the running machine can be sent on request. Edge thickness roll approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Pull-out workpiece support Suction connection 1x120mm, 1x100mm, 3x80mm Easy-touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in high-flex design, highly automated, change of edge from thin edge to thick edge via programs Aggregates: Extended inlet zone Chain conveyor central lubrication, pneumatic manual Quick-change glue basin device, currently one glue basin available Top pressure manual adjustment, PU rollers Infeed ruler manual adjustment with SIKO counter on chip removal Joint milling with slide ...

Bran centrifugal Buhler type MKLA 45-110, 4 KW, Nr. 218056, V-belt drive 1050 RPM We have several bran centrifugals of different production years in different conditions at various costs in our stock. Just ask. We are happy to support you to find an affordable solution for your requirements.

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve, helmet rail branch -Manufacturer: Helmet, branch for helmet rail -Type: Width 65 mm -Dimensions: see photos -Number: 1x branch available -Transport dimensions: 960/390/H90 mm -Weight: 9.9 kg

Branch module -Type: FRM-D-MIDI 170685 -Series: T743 -Pmax: 16 bar -Weight: 0.7 kg

Bran extractor with 2.2 kW motor and various sieve inserts Screen length: 800 mm Diameter of strainer basket: 300 mm Screening inserts: 1.5 mm hole diameter, folded 1.5 mm hole diameter, round 0.75 mm hole diameter, round

Stock number: P250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Dosing pump, Motor: Variator gear - 2,2 kW, Manufacturer: Bran & Lübbe, Type: V-J33 - 4-headed

Auction-ID: A1-48552-15