135,975 used machines on RESALE, but how to find them? Machine Search
Fully reconditioned Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top slide and a bottom valve. Framework, lid and side covers are all made of stainless steel. The bowl is equipped with a single jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, temperature sensor in the product, 3x double cutting knives, max. working pressure in the bowl -1 / 0.3 bar (protected with pressure relief valve), maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x hydraulic inlet slider at the top for the main product, including large funnel, 1x outlet valve at the bottom for the outlet of the finished product, 1x connection for pneumatics controlled ingredient valves on the side of the ...
With temperature indicator and central lubrication, Bowl: 60 litres, Bowl speed: variable speed, 2 - 15 RPM, Knives: variable speed, 200 - 6000 RPM, Mixing: 2 reverse mixing speeds, Power: 3 x 400V, 50Hz, 21kW, Dimensions: 1100 x 1600 x 1200 mm, Weight: 1325 kg
Sharp TC11 Table Cutter Volume: 11 litres very good condition completely in stainless steel 2 courses 3 cutter head Machine comes from a hobby butcher who gave up for reasons of age despite its good condition, the device must be thoroughly cleaned before use Video about test run available
This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm
Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), 3x manual tigh ...
Stephan universal machine for producing processed cheese, convenience products, vegan spreads and confectionery. Formerly used in melted and cream cheese production (also vegan). Machine bowl with top valve (DN125) and bottom valve (DN125), lid, frame, side covers are all made of stainless steel. The bowl is equipped with double jacket for heating/cooling on the jacket including all valves, 4x direct steam nozzles for direct injection of (culinary) steam into the product, 3x double blund knives , max. working pressure in the bowl -1 / 0.3 bar, maximum temperature in the bowl 95 °C, bowl volume: 300 liters, 1x valve at the top for the main product, 1x outlet valve at the bottom for the outlet of the finished product, CIP Spraybowl inside the bowl, 1x connection for pneumatics controlled ingredient valves on the side of the bowl with valve. Vacuum tank on top. Double-walled lid with scrap ...
The machine is completely factory renewed; • 1 year warranty; • Delivery, installation, samples and training are included in the price.
Manufactured in Germany Plate volume 45 liters; Set with plexiglass noise-canceling cover. Power 9/ 11 KW. The machine is completely factory renovated by MM SERVICE , with 1 year warranty and delivery, installation, samples and training included in the price.
Cutter LASKA KR – 60 liters Manufacturer: Austria Power: 16.4 kW The machine is available has been completely factory refurbished and is with a 1-year full warranty. The price includes delivery, installation, samples and training.
Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: -stainless steel Volume: 90 liters Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after it has been completely factory refurbished and with a 1-year warranty. The price includes delivery, installation, samples and training.
Cutter ROBOT COUPE – universal vertical cutter with tilt and automatic emptying Volume: 30 liters; Power: 5400 watts; Power supply: 400 volts; Frequency: 50 hertz; Power: 3 horsepower; Overall external dimensions: 740 mm × 550 mm × 1230 mm;
Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Butcher boats Height 1600 mm Width 3300 mm Length 2000 mm Weight 3200 kg Total power 91 kW Cutter Type Bowl Cutter Cutter Stainless steel, acid-resistant Construction of the cutter bowl Stainless steel, acid-resistant Bowl capacity 200 l Number of knives on the head 6 pcs. Knife shaft speed 250-4800rpm Bowl speed 1-30rpm
Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Butcher boats Height 1200 mm Width 1300 mm Length 1350 mm Capacity 70 l Electrical Supply: 400V 50Hz 3N Total power 23 kW Main Material Stainless Steel, Acid Resistant Cutter Type Bowl Cutter Construction of the cutter bowl Stainless steel, acid-resistant Number of knives on the head 6 pcs.
Alpina PB 330 incl. loader + unloader, in checked working condition
Hoegger Alpina PBV 330 Vacuum Bowl Cutter incl. loader+ unloader 5 years ago machine was refurbished by alpina
used
R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement
VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €
The Velati F4 continuous meat cutter, made entirely from stainless steel, has been designed to transform a block of meat into meat pieces, using a blade system specially devised to avoid damaging or crushing the meat. A combined blade structure, consisting of an oscillating guillotine blade and circular saw blades, allows the meat to be processed at various temperatures and cuts both the lean and fat meat. The machine can produce up to 8-10 tons per hour. Velati meat cutter is driven by a conveyor, whose speed can be adjusted via a variator, allowing both the hourly production rate and the thickness of the cut pieces to be controlled. Velati meat cutter is equipped with inverter which regulate the feed belts. The F4 models is equipped with touch-screen control and PLC which can configure and store the different work programmes. The machine is also fitted with a safety system that is cont ...
The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine ...
used
R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement
used
<br><br><br>Still in operation: Yes<br>Available: immediately
ROUTER type COSMEC 1000 second hand machine volt. 380 / 50 max. working mm. 1000
480 x 320mm; 30,000 c/h; 4 x MID-WS unwinding stations; 4 X ZHF (Siguture systems); SLT station (card glue device); SHT (Gatherer Stitcher Drum); UTR delivery station; UTR-SNT gripper track; UTR SHT Delivery Station; SNT (trimming drum); UTR SNT Transfer Station; UTR-SNT gripper track carry unit UTR-SNT delivery station; missing copy delivery station (UTR); EP station; VP station; HP station ETR insert drum. Opition 2: Mid AWS (relax station); ZF SHT Feeder; UTR gripper track on 4X RAB insert feeder; 4 x VSS stations; Gripper to follow TO VP station-to ETR insert drum Still in operation: No Verf Gbar: Immediately
1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm
Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...
Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...
Knife for cutter LASKA type K-200 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes
Yawa TYM 790 Age: 2015 DESCRIPTION: Max. sheet: 790 x 560 mm, Min. sheet: 310 x 210 mm, Max. die-cutting area: 750 x 520 mm, Max. hot-stamping area: 760 x 525 mm, 3 longitudinal foil shafts, 2 transversal foil shafts, 6 x separately adjustable heating zones Features: Efficient and easy to operate. Delivers accurate, adjustable impression for foil stamping, embossing and die cutting. Five pull foil feeds are fully programmable to provide maximum versatility and excellent foil economy. Air blast system helps to separate foil from stock on critical jobs. Accurate and programmable control system with servo motor and encoder. Micrometer adjustment on side guide and front gripper guide. Mechanical dwell on impression guarantees perfect foil stamping/foil embossing performance. Missed sheet detector. Honeycomb base is convenient for loading. 6 heating zones with digital control. 24 ...
Rühle SR 1 dicer, performance 0,8t/h, grid set variable adjustable, 1 cutting knife. The machine is immediately available and can be tested in Koblenz, Germany.
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...
Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...
Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.
VIRO StyroDesign XL-2 EPS cutting machine was built in 2011 in Slovenia by VIRO pakirni stroji d. o. o. The machine is used for precision cutting of materials such as EPS blocks, using hot resistance wires. The process is extremely fast and efficient thanks to the use of a large number of 2000 mm long wires. The machining parameters are programmed in the state-of-the-art SytroDesignPRO software, which, thanks to the optimisation of the cutting layouts, significantly facilitates process management and reduces material losses. All this makes the StyroDesign XL-2 styrofoam cutting machine an excellent choice for the production of, among others, insulation components and other prefabricated building components. Technical specifications of VIRO StyroDesign XL-2 foam cutting machine - software: StyroDesign PRO - cutting angle: 90° - cutting speed: up to 2.5 m/min - ability to cut at an ...
NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. The ...
Model SC-120 Corn cutter provides maximum product recovery, high throughput, low maintenance and automatic corn removal from the cob at high speed. Each ear is placed on the feed through chain, tip end first. The stainless chain moves the ear of corn into the feed rolls. Two sets of feed rolls line the ear of corn up with the cutter head and move the earinto the cutter knives. The cutter knives are automatically openend for cutting by the feed roll gauging sytem. Kernels fall through the head and is discharged to a takeaway conveyor. A water spray is directed into the cuto-off corn area to minimize the starch build up.
maximum number of results exceeded
please refine your search
