bottles used for sale

Qty. 1 Second-hand bottle filling line Mfc.: KHS, Siemens (SSW), Krones, Uni-Mac, Rink, MIHO etc. Built: 1986 – 2015 Capacity: 24 000 Bottles/h

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

We are offering for sale a packaging line , which remains in operation until June 2025. The line is designed for repacking 0.33L / 0.5L glass bottles into: - 6-pack open baskets - Quill boxes and dollies (SRP system Logipack, roller pallet) Output: 9,000 bottles per hour (bph) Condition: Fully functional and well maintained 1.Robot Cell Unloader PROFIROB-O-BOX A4/180 Type: MOTOMAN MH 180 II (6 axes) Commissioned: 02.01.2017 Manufacturer: Yaskawa / Profipack Year Built: 2016 2.Robot Cell Loader PROFIROB-O-BOX A4/180 Type: MOTOMAN MH 180 II (6 axes) Commissioned: 02.01.2017 Manufacturer: Yaskawa / Profipack Year Built: 2016 3.Bottle Carrier Uprighter Type: FTA-6/4-Z1-G5 Commissioned: 02.01.2017 Manufacturer: DokuConsult KG Year Built: 2016 4.Pallet Magazine Type: Typ 454 Modell LPMH Commissioned: KW 13 / 2002 Manufacturer: Krones Year Built: 2002 5.Deck Tray Insert ...

NERI DL400 self-adhesive labeller for bottles etc., with two labelling heads, suitable for bottles from 80 to 180mm diameter/width and from 30 to 120mm high. Output up to 100 containers per minute, all stainless steel construction.

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.

Filing Line for non-returnable PET-bottles make KRONES, Kaeser, Comag, Lachenmeier capacity 14.000 bottles/h at 0,5l bottle 12.000 bottles/h at 1,5l bottle neck finish PCO 1810 filling product carbonated water, beer and soft drinks with 15°C and 8,0 g/l CO2 year 2004 packing 3 x 2 (with and without handle) pallet 4 x ¼ Plastic pallet (600 x 400 mm) 2 x half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm) control Uni Siemens S7 300 kind of current TN-S-net, 400 V, 50 Hz This complete filling line for non-returnable PET bottles was manufactured in 2004 by Krones. The line is for production of high-performance beverages and it is in good condition. consisting of: 1. Blowmoulder-Filler-Bloc KRONES Contiform S08 Incl. preformtipper Tanner, Prefromconveyor Cooling Unit KKT Kraus KLC50N Mecafill VKP-PET 2880-80-113 Neckhandling Automatic butterfly ...

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Vibrating bottles: 2 -Cable length: 6m each -Weight: 100 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

The detection is set up on 0.5l glass bottles in the 20 module box. The inspector is equipped with a multi-camera system. As soon as a foreign bottle is detected in the box, it is then discharged via a pusher. Currently is set to cross travel. The detection is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in an other line. Currently the set up is for a long side leeding crate.

Auction-ID: A1-46943-30

dmp Sondermaschinenbau type ORL-300 orientator for plastic bottles, bottles where the caps are not in the correct position to the position of the labels are turned by 180° before being delivered to the next machin, capacity 120 bottles per minute, electrics 3+N+PE 400V/50Hz/16A, power consumption approx. 1,1 kVA, compressed air max. 6 bar, machine floor space approx. 1200 x 1050 mm (LxW), machine height approx. 2100 mm, machine net weight approx. 200 kg

Auction-ID: A1-46943-17

Empty bottle inspector, make Heuft, type: Spectrum TX (HBBIRTI24), built 2006

For sale is a functional, well-preserved Krones Linatronic empty bottle inspector. Specifications: Manufacturer: Krones Model: Linatronic Year of Make: 1997 Quantity: 1 pc. Capacity:- Voltage: 230/400 V Frequency: 50 Hz Length: 250cm scaffolding + 70cm overhang towards filler Width: 110cm Height: 280cm Equipment: Formats see pictures

Bottle inspector Krones / Germany Type Linatromic 735 Full Inspector With automatic rejection Year of construction: 2011 FILM AVAILABLE - PLEASE REQUEST

Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | 380V, 2.0kW | Machine dimensions: L1600xW800xH1160mm | weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Inspektor Linatronic along with contour detecion module: • Type: Krones Linatronic K735 • Manufacture year: 2012 • Capacity: max. 60 000 bottles/h. • Direction of operation: from left to right Possible detection: • Residual liquid (infrared) • Double check of residual sodium (high frequency) • Inspection of neck damage • Side wall control modules - 4 modules • Rejection of damaged bottles • Separate rejection of dirty bottles • Bottle contour detection • Bottle color detection • Separate rejection of bottle with wrong contour or color The Inspection unit contains the conveyor which separates bottles before the entry to the Inspector and the Ejector table after. Total lenght of the Unit: 11300 mm

The system was used to paint glass bottles. It has two spray booths and a dryer with liquid gas. Temperature 170/180 degrees C. Size: 3.80 meters wide, about 11 meters long. Works perfectly. Has been constantly maintained. Many spare parts with him.

Output (Packs Per M?Inute): 45 U/min // Type : Barrel

Machine for filling, inserting dropper inserts and sealing vials and bottles with screw caps (stable, stackable) • Maximum output 80 objects/min • 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling ranges possible by purchasing new pumps • 1 new replacement pump for filling range 20-100 ml • Anti-drip protection through suction back • Bottle feed through infeed turntable • Bottle discharge through discharge turntable • Press-in station for dropper insert diam. 12.2 x 19 mm with sorting pot • Screw-on station with pre-screwing and post-screwing for screw cap diam. 20.5 x 32 mm with sorting pot • Vacuum pump • Available bottle formats (all information without guarantee, no guarantee of completeness): - diam. 24.2 x 63.3 mm (10 ml) - diam. 29 x 74.2 mm (20 ml) - diam. 32.2 x 83.8 mm (30 ml) - diam. 35.4 x 71.7 mm - diam. 37 x 91 m ...

This machine is used for inline inspection of bottles or containers with regard to fill level, closure and labeling.

Used Used Bottle-Washer MPF 2017: Year: 2017 Condition: Good Used Bottle-Washer MPF 2017: Year: 2017 Speed: 8.000 Bph Model: LAVATRICE Function: External washing Safety protections Code: M 62 More details: https://bottlingscout.com

Miho David 2001 Empty Control System automatically inspects glass bottles for foreign bodies, dirt, liquid residues and bottle defects before filling. Only flawless bottles are filled. Robust design and reliable performance increase process reliability and product quality in beverage production lines. - Up to 25,000 bottles/hour - from left to right

Nagel inspector, for bottom, mouth and residual liquid control, set up for 0.33 l longneck bottle (other formats possible), completely overhauled in 2025, available at short notice due to cancelled order.

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing  ...

For wine and sparkling wine bottles 6000 bottles Type: WD/ 12 capacity / hour ca.:10000

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

consisting of:? - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour Details: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Maximum label size: 1200x300mm, speed: 16 meters per minute, 4-speeds. Equipped with: Cyklop thermal inkjet coder, Type: CM100. Includes: (1x) scissor lift table, size: 950x600mm Auction-ID: A1-46397-10

Gas bottles 33 kg 5 pcs., apparently empty

including: 10x Empty jerry cans, volume capacity 25 liters (Demineralized water), 3x PROPANE gas tank, 2x opened 1x sealed Auction-ID: A1-46623-102

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Technical Specifications & Performance Data The KHS Innofill-ER VF 143/20 is a high-speed used isobaric filling monoblock designed for premium glass bottle applications in beverage production. Engineered for reliability in industrial packaging environments, it offers consistent performance for soft drinks, sparkling water, and still water on a used bottling line. Manufacturer: KHS Model: Innofill-ER VF 143/20 Category: Filling Monoblock (Isobaric) Year of manufacture: 1994 Rated speed: up to 45,000 bottles per hour (format- and product-dependent) Filler configuration: 143 isobaric filling valves (rotary) Capper: 20-head Alcoa ROPP, 20 mm (rotary) Container types: Glass bottles Bottle formats: 0.70 L, 0.75 L Product types: Soft drinks, water (sparkling), water (still) Electrical: 50 Hz Condition: In storage Documentation & safety: Manuals available; safety features included Advanced Autom ...

Used Rinsing Machine Poggio for glass bottles 6000 bph Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsin ...

Used Filling Line For Edible Oil In PET 1L Bottles Capacity: 6.000 bph x 1,0 L Blow Molding Machine KOSME KSB 3000 – 2001. – 2 pcs x 3.900 bph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. – 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filling Monoblock Filler and capper – ICS-Slovenia – 1995 – 6.000 L/h Labelling Machine Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3×5 bottles – ICS – 1995 Shrink Wrapper Shrink wrapper SMIPACK-packer in foil 2×5 bottles – 2013 Pallet Wrapper Pallet wrapper ZLATOROG-Slovenia – 1999 Compressor KAESER low and high pressure compressors – 2000 Refrigeration dryer There  ...

Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile  ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Q ...

Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity fillin ...

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...