bobst sp used for sale

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

CUBE control system, 2 universal frame, Centre Line, Blanking station, Direct pallet loading, Automatic Universal feeder with non stop facility, Adjustable feed table with complement of infeed table furniture, Left and right hand side register lays, Bottom mounted gripper system, Double action stripping, Binder sheet insertion, hin plate with micro metric adjustment, tools for loading and transporting, Elevated 410 mm, MACHINE IS COMPLETELY WORKSHOP REFURBISHED !

Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.

Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Reference ID: PP-53194 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SP 104-ER Year Built: 1996 Color:- Impression:- Working Hours: 64,000 Speed: 8,000 sheets/hour Max. Size: 1039 x 740 mm Min. Size: 399 x 350 mm Condition: Good Location: Europe Availability: - Machine Description Feeder & Infeed Non-stop (manual/automatic): Manual Non-stop infeed bars (mm): 18 Non-stop bars coating (Chrome/Teflon/Standard): Standard Non-stop bars equipped with air pressure (Y/N): No Non-stop bars with lateral shifting (Y/N): Yes Lateral register available (Y/N): No Register type (POWER/ACCU/LATERAL/MECHANICAL): n/a Register mark width (1 mm): n/a Reading from (Top/Bottom/Both): n/a Front margin – standard/light sensor: Yes Mechanical front margin (25, 60, n/a): 25 Upper transport belts on infeed (corrugated): No Detection sheet direct ...

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Bobst SP 130 E Year 1985 Max.Size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. Cutting force: 500 T Centerline Immidiately available.

Reference Num.: 4274 Brand: BOBST Type: SP 142 CER Construction year: 1995 Available: directly Status: In production Location: Deutschland

Impressions=0 m, Condition= Very Good , Availability= 2025-12-23, Bobst Speria 106 Sheet Counter: 200 million Maximum format: 740 × 1060 mm Minimum format: 350 x 400 mm Maximum Speed: 7700 sheets/hour Pressure: 260 tons Stripping station CUBE control Centreline system for quick job changes Quick lock stripping frame Micrometric adjustment 1mm thin plate system Electronic sheet travel control Double-action stripping OS pull side lay OOS push side lay Make-ready table - stripping Non-stop delivery

AUTOMATIC DIECUTTER BOBST SP 1080 - Year 1963, No stripping unit - Max size 108x78 cms., Min. size 35x30 cms. - Pressure 180 tons, 4.500 sh/hour - Many chases and frames, in production in Italy - Always perfectly maintained and for low productions, available immediately

max. sheet format 1040 x 740 mm, min. 400 x 350 mm, stripping station, centerline, non-stop feeder, non-stop deposit, drawing mark left, sliding mark right, gripper edge separation, raised 41cm, production hours: 25,000, Bobst-Cube control, micrometer adjustment, electric double sheet control, 1 upper die-cutting frame with quick-release fastener, 1 die-cutting plate 4mm, 1 upper stripping frame, 1 lower stripping frame, max. machine speed 7000 sheets/hour, max. punching force 250 tons, Processable materials: paper min. 80g/m², cardboard up to max. 2000g/m², corrugated cardboard up to 4mm. Overhauled, repainted

Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames

Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately

Bobst SP1600 E, Year 1987, Max.Size: 1115 x 1600 mm, Min.Size: 600 x 850 mm, Max. cutting force: 750 T, Centerline, Non stop, Chain and all grippers as new.

Bobst SP 900, Typ: APM, Year: 1970, Max.Size: 900 x 630 mm, Min.Size: 300 x 200 mm, Max.Speed: 3600 Sh/h

Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories

Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units

Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...

Bobst SP 142 ER, Year 1987, Max. size: 1020x1420 mm, Min. size: 700x520 mm, Max. speed: 6000 Sh/h, Max. cutting force: 600 T, Centerline, micrometer adjustment, in production

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

Bobst SPO 160 ER - Matic, Year 2002, Max. Size: 1620x1120 mm, - Prefeeder Bobst C-160E Matic, - Transfer and aligning section with side and front alignment, - Die cutting section with center line, - Stripping station with quick lock system, - Blanking station with quick lock system, - Chase Loader for the preparation of the cutting form outside the machine, - integrated palletizer with batch control unit, - Computer with Matic Setup and Control system

Bobst SP 142ER,, Year 1985, Max.Size: 1420x1020 mm, Min.Size: 700x500 mm, Max.Speed: 6000 Sh/h, Max.Cutting Force: 600 T, Centerline, Quicklock system, With tool separation station, Between-bow inserter and pre-taping device,, Working platform,, - 1 x preparation table for external tool preparation, - 4 x frames for breakout molds, - 4 x closing frames for punching tool, - 4 x Rescue vehicle

Bobst SP 102 CER, Max.Size: 720x1020 mm, Min.Size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max.Cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

hoogte vijfde wiel, Max.Size: 800x1120mm, Min.Size: 380x450 mm, Max.Speed: 6500 Sh/h, Jahr 1974, Centerline, Quicklock system, in production

Bobst SP 102 CER, Max. size: 720x1020 mm, Minimum size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max. cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

Reference ID: PP-56668 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SPO 1600 Year: 1986 Speed: 6000 sheets/h Max. size: 160 × 110 cm Min. Size: 60 × 52 cm Condition: Good Location: Europe Availability: Immediately

Bobst Sprintera 106 PER - with PowerRegister, Jahr 2003, Paper_ Cardboard_ Corrugated, From 70 g/m2 250 - 2000 g/m2, E flute and B flute up to 4 mm, Sheet size max. 1060 x 760 mm min. 400 x 350 mm, Die Cutting with gripper max. 1060 x 745 mm, Embossing max. 1060 x 740 mm, Gripper size from: 9 - 17 mm, The cutting knives height 23.8 mm, Embossing height 6.35 / 7 mm, Pressure 2.5 MN max., Speed (sh/h.) max. 12,000, Pallet height max. 1600 mm., Inclusive : - Power Register -, Height 60cm - Quicklock System, Centerline

Reference ID PP-47933 Category Flexo Printer Manufacturer Bobst Model 160 A-Matic and Flexo 160 Year Built 1994 Color 2 Speed 6500 sheets/h Max. size 1,600 x 1,100 mm Min. size 600 x 520 mm Condition Good Location Europe Availability - Machine Description BOBST 160 A-MATIC CUTTING MACHINE Sheet sizes: - Maximum cutting size: 1,600 x 1,100 mm - Minimum cutting size: 600 x 520 mm Cutting size with front waste: - Maximum cutting size: 1,600 x 1,075 mm - Minimum cutting size: 580 x 492 mm - Gripper margin adjustable: 15 +/- 3 mm - Thickness of corrugated board up to 9mm - Thickness of solid board from 1mm - Cutting force, maximum: (400 tons) 4MN - Production speed: up to 6.500 sheets per hour Construction year: 1994 Production country: SWITZERLAND Voltage: 480 V Frequency: 50 Hz 2 COLORS UNIT BOBST FLEXO 160 Sheet sizes: - Maximum cutting size: 1,600 x 1, ...

Reference ID PP-52915 Category 5-Colors Flexo Printer Manufacturer Bobst Model Flexo 200 Year Built 1988 Color 5 Impression- Working Hours - Speed-- Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description 5 colors Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO TECHNIQUE;

FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Maximum corrugated board thickness: 10 mm Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine  ...

Web Width: 2450 mm

Flexo printing machine BOBST M6 + Milltex cutting machine Substrate width: 670 mm Print width: 660 mm Maximum speed: 200 m/min Monomatic Unwinder DZ15.67TB with Automatic Splicer Vario™ servo drive for inlet and outlet Kelva web cleaner Wet lamination in the printing unit Corona Treater – Vetaphone 13 flexographic printing units V-Flower Flexo Printheads in Sleeve Solution Drying system with 2 drying hoods – total drying length: 4.4 m GEW E2C HP 180 W/cm² UV Drying Lamps Two rail turning strips Lamination and cold foil stamping AVT Helios S Turbo HD System 2 barcode verification modules Laboratory color measurement with Delta E BST Powerscope Camera Web decrimping device 2 perstatic pumps for flexographic printing units 13 pressure sleeves 13 anilox rollers up to 550 lines/cm Milltex Sincroflex sheeting machine, built in 2020 Sheet cutting machine for paper ...

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

Bobst 1080

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601

Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH

Format range: max. 680 mm min. 126 mm Equipment: Longitudinal seam, disc underglue unit left, Vibrator & dental gauge on the feeder, Bobst CUBE control, primary crusher right and left, kicker, counter, fully automatic format setting with program memory, pneumatic, intermittent press belt. Overhauled 2022: cleaned, checked, painted, new jetty and Transport belts.

Bobst Flexo 200 5 colours flexo printing machine for corrugated board 5 flexo printing units Prefeeder Automatic Delivery Machine is in a very good condition Available immediately Location: Western Europe Manufacturer: Bobst SA Switzerland Type: Flexo 200 Year of manufacturing: 1988 Max. Sheet size: 1270 x 2032 mm Min Sheet size: min. 600 x 520 mm Max. printing area: max. 2032 x 1270 mm Material thickness max. : 9 mm

Bobst Domino 145 II Matic, Year 1996, Longitudinal seam, Automatic floor (3-point), 4/6-Punktklebung, Cold glue system from Valco Year 2019 with 5x nozzles, Hot melt adhesive system by hhs-Xmelt year 2017 with 3x nozzles, Handle dispenser, CoroPack 125 Bobst is included, year 1996 - electronic is new.

Reference ID: PP-56048 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 II Matic Year Built: 1996 Condition: Good Location: Europe Availability: Immediately Price: 85.000€ LOT Key Features & Equipment • Longitudinal seam configuration • Automatic bottom system (3-point) • 4/6-point gluing capability • Cold glue system by Valco (Year 2019) with 5 nozzles • Hot melt gluing system by hhs-Xmelt (Year 2017) with 3 nozzles • Integrated handle applicator • CoroPack 125 Bobst included (Year 1996) – electronics renewed

Manufacturer: Bobst Model: Flexo 200 Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO-TECHNIK; steam pressure reduction station from Helmut Herbert GmbH The running speed of the system is approximately 4,000 sheets per hour. Spare parts: ST= pieces Bezeichnung Lief.Artikelnr. Bestand BasisME Freilauf FK 24 AP BSA1101010400 2 ST Freilauf FB 44 SF BSA1101047600 2 ST Rutschnabe kplt. M. Kettenrad 16H7 Z20 RN 250M-1/KR 2 ST Reibscheibe RN 250/RS RN 250/RS 8 ST Tell ...

semi-automatic packaging aid for folder-gluers, boxes, folded flat: max. 400 mm, min. 50 mm, length of the boxes: max. 500 mm, min. 100 mm, standard, right-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, box types: ordinary folding boxes 4+6 dot boxes, with or without lid. Overhaul 2025: cleaned, checked, painted, new belts and belts

Bobst Media 100 II A2 year 1999 HHS gluing system 6 guns cold glue 1 gun hot glue Disc Gluing

Make : Trepko Model : Split Cup Capacity : 1000 c/h Stations : Cup Dispenser-Granuals or Cereals Filler- Yoghurt Filler- Aluminium Lid placing - Sealing - Outfeed conveyor-pick and place unit Cup Diameter: 95 mm

x-travel:1530 mm y-travel:530 mm z-travel:465 mm side by side, right side fixed table X =:925 mm side by side left side 2 axis table X =:780 mm control:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/min Spindle Torque:120 Nm power capacity:22 kW Fixed Table Dimensions:920 x 540 mm Table load fixed table:2000 kg Max. parts size on fixed table:900 x 500 x 400 mm Diameter of integrated 2-axis rotary table:650 mm Table load rotary table:500 kg B-axis swivel angle:-90°/+110° ° / deg Max. parts size on rotary table:600 x 500 x 400 mm Max. Parts size over both tables:1500 x 500 x 400 mm internal coolant system feed:70 bar bar weight of the machine ca.:10,5 t dimensions of the machine ca.:3,65 x 2,53 x 2,81 m pendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new ...

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

Model SP17-5 and SP17-4 in stock, data SP17-5: 3 kw, 3x 380-400-415V, useful frequency: 50 hz, 33 kg, product number: 99284892, pressure port connection: RP2 1/2, pump speed 2900 rpm, nominal volume flow: 17 m³ / h, nominal head: 40 m, number of stages 5, maximum medium temperature: 40° C,