board cutting used for sale

CNC plasma cutting system knife Metalmaster working range: 8000mm x 2500mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition immediately available with Donaldson filter system Including Cad/Cam software commissioning on request

CO co² Bystar 3015 4.4 kW, 1500 x 3000 mm, table size incl. removable table, without loader, without extraction, BJ. 2006,. Glass revision in November 2015 Laser: 28.000 h Power: 50,000 hours

Pressure atmospheric maximum: 4000 bar X - axis: 3000 mm Y - axis: 2000 mm Sheet thickness: 0,00 mm Number cutting heads: 0   CNC Brand: _Unknown / Other CNC Model: Flowcut FLOW - MACH3 3020B CNC Waterjet 3000 x 2000 x 4000 Bar MACH - ID 6372 Make: FLOW Type: MACH3 3020B Control: FLOWCUT YOP: 2013 Hours: 3000 Working area X Axis    3.000 mm Working area Y Axis    2.000 mm Working area Z axis     178 mm Power resonator            4000 bar kW / Amp Feed rate X-Axis           12.700 mm Feed rate Y-Axis            12.700 mm Feed rate Z-Axis            12.700 mm Control            FLOWCUT Cutting hours     3000 H Linbear straightness a ...

CNC plasma cutting system blades Metalmaster Work area: 8000 x 2500 mm Plasma: Hypertherm 260 Cutting up to 32mm very good condition with Donaldson filter system now available Including CAD/CAM software commissioning on request

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

Microstep - EuroCut-P 3001.15 Working range: 1500mm x 3000mm plasma source Kjellberg HiFocus 160i with automatic gascosole cutting up to 25mm quality cutting suction Donaldson MD2-PLC + DFPRO 4 SPRK with an additional EX protection. Refurbished in 2016 All maintenance or repairs were carried out exclusively by the manufacturers (MicroStep and Donaldson). The prescribed maintenance intervals have always been adhered to. All maintenance and repairs are extensively documented. commissioning on request

Microstep - EuroCut-P 3001.15 Work area: 1500 x 3000 mm Plasma source of Kjellberg HiFocus 160i with automatic Gaskosole Cut quality cutting up to 25 mm Extraction Donaldson MD2-PLC + DFPRO 4 which with additional EX-protection. Refurbished in 2016 All servicing or repairs were solely by the manufacturer (Company MicroStep and Donaldson). The prescribed maintenance intervals were always met. All maintenance and repairs are extensively documented. Commissioning on request

Laser cutting machine Bystar 3015 Bylaser 4000, 4 kW Laser source incl. shuttle table system, cooling system, compl. Cabinet combination with CNC and laser- Control, protection in the cutting area, 2 Cutting heads, reflection absorber, cross-Jet, extraction system Documentation Laser a 19, 000 h Maintained by Bystronic.

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Knife Cortina 2600. Year built:1994 Control KS 20A Plasma: Hypertherm Max 100 (cutting up to 30mm) The suction table: 1500mm x 3000mm. With only one burner car instead of 2 or 3, you have a working width of up to 2000mm. The box program on the PC is the OmniWin CAD. Extraction system: Donaldson 5.5 KW to be visited under electricity commissioning on request

Esab Combirex DX 3000 Working range: 2500mm x 4000mm 1x Plasma Support CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Combirex DX 3000 Built: 2015 Control: Vision T5 Track width: 3,000 mm frame: 6000mm Working range: 2500mm x 4000 m suction table 1 plasma torch with power source m3 202 torch PT 36 Cutting rods: Punching: 38 mm Cutting: 45 mm laser pointer filter system ex protected cutting software: Columbus Very low operating hours commissioning on request

Bystar 4025 NT 65 Sheet size: 6500 x 2500 mm Interchangeable table system Axis of rotation: 15-315mm 4.4 of kw CO ² laser steel 25 mm Power-on hours 18000 Vacuum pump 16000 With filter system Machine is already dismantled

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

CNC Portal plasma cutting machine Manufacturer: ESAB Eagle 2500 Year of construction: 2004 Governance: Vision DNC connection Track width: 2,500 mm Career length: 5 m Work area: 2 x 3 m Vacuum table 1 plasma torch Kjellberg HiFocus 160i power source automatic gas Console (see PDF) Cutting thickness: up to 25 mm quality section Filter system Cutting software: Columbus Now available

Byspeed 3015 4400 W Bystronic 2006 Duty hours: 58800 h cutting hours: 27510 h laser power: 4400 W workspace: 3000 x 1500 mm maximum thickness: structural steel: 20 mm stainless steel: 12 mm aluminium: 8 mm machine weight: 21000 kg Accessories: Byloader 3015: sheet dimensions: 3000 × 1500 mm Blechtaf Download eldicke: 0.8-25 mm-maximum sheet metal Panel weight: 890 kg documentation

Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645

Gemini type 4000 BJ. 11/2007 8000mm longitudinal career 2 x oxy-fuel burner 1 x plasma support preparation Workspace 3500mmx6000mm without filter system without firing tables. Commissioning on request

Manufacturer: Imes-iCORE Type designation: iCUTwater ECO Year of constr.: 2017 Work area: 620 x 1000 mm Die heads: 1 2 1/2 D, 2D or 3D: 2D Hours of operation: 20 Dimensions: Dimensions of 2150 x 1615 x 1964 Power: 7,5 kW Power supply: Bar: 1500 bar Hedging in Amper: 32A Hours of operation: 20 Integrated pump directly driven built-in pump "Tilo Klett" with 1500 bar / 2 l / min and cutting head Allfi X-type, sand Raddosierer type Jetcut,. integrated reservoir sand 25 kg. Designed for Fokusierrohr 0,90 mm and nozzle 0.30 mm. Incl. control software and post processor on the machines notebook.

Knife CNC plasma and cutting system Multitherm 4000 gauge width 4000mm 1 x Autogen Support 2 x Plasma Hypertherm 260 XD only the machine bridge without runway and suction table is sold

Blade CNC plasma and cutting installation MultiTherm 4000 Track width 4000 mm 1 x autogen support 2 x plasma Hypertherm 260 XD only the machine bridge without carrier and vacuum table is sold

Knife Cortina 2600. Year of construction: 1994 Control KS 20A plasma: Hypertherm MAX 100 (cut up to 30mm) The vacuum table: 1500 x 3000 mm. With only a torch cart instead of 2 or 3, you have a working width up to 2000 mm. The box program on the PC is the OmniWin CAD. Exhaust system: Donaldson 5.5 KW To visit, now available under current Commissioning on request

Air Liquide Plasma tome 25 HPC 2007 construction working area 2m x 4m water table with nivau regulation 1 x Plasma Nertajet HP 125 , cutting up to 25mm

Air Liquide Plasmatome 25 HPC Built in 2007 Work area 2 m x 4 m Water table with Nivauregulierung 1 x plasma Nertajet HP 125, cutting up to 25mm

4000 x 2000mm Laser 4400w ByVision CNC

ESAB CXD 3000 P Work area: 14000 x 2500 mm 2006 completely overhauled, new controls, new plasma system installed. 1 x plasma Plasmaarc 200 Cutting up to 40mm 2 x 6 m including burning table Without firing tables, without filter system Installation and commissioning on request

Engine 2.2-3 kW 2 pieces of it

CB-Behrens CB-25-II/1650-L Hours of operation:-Behrens 41190 hour laser ca 25000 hours Year of construction: 1995 Documentation: All available Software: IBH-CNC Last revision: mid 2016 laser Wegmann Basel Triagon 2Kw 2014/5 the glass tubes have been renewed Y-spindle was renewed. Only 17 are well usable from the revolver places the others should be also usable after a review.

CNC laser cutting machine Bystronic Bystar 3015 -. Overall performance 125 KVA Co ² laser source of Bylaser power 5200 Watt,. CNC rotary axis for Chuck Ø 315 mm with thrust bearing for tube processing Cutting performance ST37 - approx. 25 mm Stainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mm Cutting speed maximum 50 m/min, simultaneous positioning up to 113 m / min car. Bela de Setup Byloader with sheet metal separation Dedusting equipment Only dividers operation! CA. 27.500 power-on hours -. approx. 6000 hrs laser hours

Power: 3 kW X - axis: 0 mm Y - axis: 0 mm Number laser heads: 0   MACH-id    5179 MAKE         Bystronic TYPE           Bystar 3015 YOP             1998 SPECIFICATIONS Control      Bystronic Guillotine / Lazer / Cutting table     Laser cutting Working area Length x Width      3000 x 1500 m Max. Cutting height / rotation °     200 Number of controlled axis        3 Power resonator kW / Amp      3.5 kW Filtration / Collector    Yes DIMENSIONS Length        10.000 mm Width        5.000 mm  

Plasma and cutting installation Promotec Ector 30 / 170 Working range: 3000 mm x 17000 1 x plasma HT 2000 Hypertherm cutting up to 25mm 1 x autogen support up to 100mm To visit machine under power. Without table and filter Installation and commissioning on request

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

Working condition Complete electrics Yom: 1990 Technical details: Swing over bed: 2500 mm Turning length: 12 500 mm (The whole length of bed 15 700 mm) we can also make the extension of the needed workpiece weight: 120 tons bed width: 2 900 mm machine weight: 120 tons

2 Coilhaken 1 x 9 t 1 x 1 t

CONTI-WELD PLASMA CUTTING EQUIPMENT TYPE 60 H CONTI-PAC -60 amp -Snijcapaciteit in staal 20 mm -Ingebouwde luchtdrukregelaar -Met toebehoren -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Soldering table Ceramics: 340 x 390 mm Equipped with: 2 Gasfackels Weight: 300 kg Table Lxwxh: 2000 x 900 x 1750 mm

Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available

MAZAK laser cutting system NTX510 1, 5kW Year of construction: 2000 very well preserved, fully reconditioned MAZAK laser machines with 1500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7 m Small part conveyor completely encapsulated engine cover FE: up to 12 mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction system incl. commissioning + training = optional with automatic loading and unloading.

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

MAZAK laser cutting system STX510 MKII 2, 5kW very well preserved, fully reconditioned MAZAK laser machines with 2500W Panel sizes: 3000 mm x 1500 mm minimal footprint by 2, 9 m x 7, 3 m Small part conveyor Ball roller table completely encapsulated engine cover casting bed, no foundation necessary FE: up to 20mm VA: up to 10mm ALMG: up to 8mm Plastic can including CAD / CAM software 2018 version including warranty incl. commissioning + training To test power ready to delivery ready to use = optional with automatic loading and unloading MAZAK CELL =.

Control system: TRUMPF Power on: 35071 h Cutting time: 14638 h Laser power: 3 kW Table dimensions: 3000 x 1500 mm Travel distances: X: 3000 mm Y: 1500 mm Z: 115 mm Max. Thickness of material Mild steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2200 mm Machine weight: 12000 kg

Cutting mill Retsch SM 2000

Good working conditions

THREAD CUTTING MACHINE TYPE TP 1800-16 P Capaciteit M3-M12 -Pneumatic -Inclusief 6 tappotjes -Exclusive work table (meerprijs work table) -Without clamping table PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Fiber laser machine HLF Power: 4kW Sheet size: 3000 x 1500 mm Changing table Siemens touch screen controller with LAN/USB Siemens drives Precitec auto focus Pro cutter cutting head IPG resonator with 4kW is included: Warranty CAD CAM software Commissioning DTL delivery Training offered

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...

1250 x 2500mm Siemens 840D 3200w

BLUETECH-THREAD CUTTING MACHINE TYPE BHK02 -Hydraulic -Factory bereik 2050 mm -Kop is draaibaar -Snelwisselopname -Traploos instelbare tapsnelheid -Traploos instelbare terugloop snelheid -Toerental digital uitlezing -Inclusief 8 tappotjes -Zware factory Panel met T-sleuven -Smeersysteem met manuele of automatic functie -Noodstop -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)